Hydras - Revision history

Davo: /* Comparison */

2021-06-24T14:07:18Z

Comparison

← Older revision		Revision as of 14:07, 24 June 2021
Line 59:		Line 59:
	\|-		\|-
	! X/Y Printing<br> Speeds		! X/Y Printing<br> Speeds
	\| colspan="3" \| Up to 60 mm/sec\|-		\| colspan="3" \| Up to 60 mm/sec
			\|-
	! Enclosure		! Enclosure
	\| colspan="3" \| Heated to 55°C		\| colspan="3" \| Heated to 55°C

Davo: /* Comparison */

2021-06-24T14:06:59Z

Comparison

← Older revision		Revision as of 14:06, 24 June 2021
Line 16:		Line 16:
	\|+ Printer Model Comparison		\|+ Printer Model Comparison
	! style="width: 10%" rowspan="2"\|Designation		! style="width: 10%" rowspan="2"\|Designation
	! style="width: 20%" ~~colspan~~="2"\|~~[[Hydras~~\|~~Hydra]] 16A Freestanding~~ <br> Heated		! style="width: 20%"\|Freestanding <br> Enclosed, Heated
			! style="width: 20%"\|Freestanding <br> Enclosed, Heated
			! style="width: 10%"\|Benchtop <br> Enclosed, Heated
	\|-		\|-
	! [[Hydras\|Hydra]] 16AS<br>''Standard''		! [[Hydras\|Hydra]] 16AS <br> Standard
	! [[Hydras\|Hydra]] 16AT<br>''Tall''		! [[Hydras\|Hydra]] 16AT <br> Tall
			! [[Hydras\|Hydra]] 21
	\|-		\|-
	! Target <br> Users		! Target <br> Users
	\| ~~colspan="2"~~ \| ~~Industrial Manufacturing~~		\| Laboratory Research
			\| Laboratory Research
			\| Laboratory Research
	\|-		\|-
	! Image		! Image
	\| <gallery>File:Hydra_16A.png</gallery>		\| <gallery>File:Hydra_16A.png</gallery>
	\| <gallery>File:Hydra_16AT.png</gallery>		\| <gallery>File:Hydra_16AT.png</gallery>
			\| <gallery>H21.png</gallery>
	\|-		\|-
	! Placement<br>Mechanism		! Placement<br>Mechanism
	\| ~~colspan="2"~~ \| Freestanding (Floor) Model<br>Gantry Design		\| Freestanding (Floor) Model<br>Gantry Design
			\| Freestanding (Floor) Model<br>Gantry Design
			\| Benchtop Model<br>Gantry Design
	\|-		\|-
	! Exterior Dimensions, <br> XxYxZ (closed)		! Exterior Dimensions, <br> XxYxZ (closed)
	\| 48x35x50 in <br> 120x88x125 cm		\| 48x35x50 in <br> 120x88x125 cm
	\| 48x35x60 in <br> 120x88x153 cm		\| 48x35x60 in <br> 120x88x153 cm
			\| 42x24x33 in <br> 107x61x84 cm
	\|-		\|-
	! Power <br> Requirements		! Power <br> Requirements
	\| colspan="2" \| ~~15A~~ / ~~110VAC~~ / 60 Hz <br> 8A / ~~220VAC~~ / ~~50Hz~~		\| colspan="3" \| 15 A / 110-120 VAC / 60 Hz <br> 8 A / 220-240 VAC / 50 Hz
	\|-		\|-
	! Build Volume		! Build Volume
	\| 16x12x10 in <br> 400x300x250 mm <br> '''or'''<br> 24x16x10 in <br> 600x400x250 mm		\| 16x12x10 in <br> 400x300x250 mm <br> '''or'''<br> 24x16x10 in <br> 600x400x250 mm
	\| 16x12x20 in <br> 600x400x500 mm <br> '''or''' <br> 24x16x20 in <br> 600x400x500 mm		\| 16x12x20 in <br> 600x400x500 mm <br> '''or''' <br> 24x16x20 in <br> 600x400x500 mm
			\| 16x12x10 in <br> 400x300x250 mm
	\|-		\|-
	! Bed <br> Temperatures		! Bed <br> Temperatures
	\| colspan="2" \| 120°C <br> ''~~200°C~~ option'' <br> ''~~sub-ambient option~~''		\| colspan="3" \| 120°C / <span style="color: red;">200°C option</span> / <span style="color: blue;">''-5°C option''</span> <br> ''Note that 200°C beds larger than 400x300mm <br> require 230VAC for optimal heating.''
	\|-		\|-
	! ~~200°C Hotbed <br> Note~~		! Bed RTDs
	\| colspan="2" \| ~~''Note that 200°C beds larger than 400x300mm require 230VAC for optimal heating.''~~		\| colspan="3" \| 1k PLAT
	\|-		\|-
	! X/Y Printing<br> Speeds		! X/Y Printing<br> Speeds
	\| colspan="2" \| Up to 50 mm/sec		\| colspan="3" \| Up to 60 mm/sec\|-
	\|-
	! Enclosure		! Enclosure
	\| colspan="2" \| Heated to 55°C		\| colspan="3" \| Heated to 55°C
	\|-		\|-
	! Motion Control		! Motion Control
	\| colspan="2" \| 3-Phase with <br> Closed-Loop Feedback		\| colspan="3" \| 3-Phase with <br> Closed-Loop Feedback
	\|-		\|-
	! Positional Resolution <br> X/Y/Z in µm		! Positional Resolution <br> X/Y/Z in µm
	\| colspan="2" \| 6 / 6 / 1		\| colspan="3" \| 6 / 6 / 1
	\|-		\|-
	! Positional Accuracy <br> X/Y/Z in µm		! Positional Accuracy <br> X/Y/Z in µm
	\| colspan="2" \| 60 / 60 / 10		\| colspan="3" \| 60 / 60 / 10
	\|-		\|-
	! Positional Repeatability <br> X/Y/Z in µm		! Positional Repeatability <br> X/Y/Z in µm
	\| colspan="2" \| 60 / 60 / 10		\| colspan="3" \| 60 / 60 / 10
	\|-		\|-
	! Precise X/Y Output <br> for Bioplots		! Precise X/Y Output <br> for Bioplots
	\| colspan="2" \| 100 µm lines <br> 200 µm spacing		\| colspan="3" \| 100 µm lines <br> 200 µm spacing
	\|-		\|-
	! Precise Z output <br> for Bioplots		! Precise Z output <br> for Bioplots
	\| colspan="2" \| 25 µm layers		\| colspan="3" \| 25 µm layers
	\|-		\|-
	! Tool Positions <br> ''Optional''		! Tool Positions <br> ''Optional''
	\| colspan="2" \| Five <br> ''Ten''		\| colspan="3" \| Five <br> ''Ten''
	\|-		\|-
	! colspan="3" \| ~~Accessory Options~~		! Reservoir<br>Ambient <br> Options
			\|colspan="3"\| All [[EMO]], [[SDS]], DSD and SMH Heads
	\|-		\|-
	! [[Reservoir ~~Heads]]~~		! Reservoir<br>Temp Ctrl<br> Options
	\|colspan="2"\| All [[~~EMO~~]], [[~~COD~~]], [[~~SDS~~]], [[~~CSD]], DSD, and SMH Heads <br> All [[VOL]], [[VCD]], [[KRA~~]], and [[~~KCD~~]] Heads		\|colspan="3"\| All [[VOL]], [[KRA]], [[TAM]], [[RSD]], and [[HSD]] Heads
	\|-		\|-
	! [[Filament ~~Heads]]~~		! Filament <br> Options
	\|colspan="2"\| All [[MK1-250]], [[MK2-250]], [[MK1~~-450]], [[HT-150]], and [[HT~~-450]] Heads		\|colspan="3"\| All [[MK1-250]], [[MK2-250]] and [[MK1-450]] Heads
	\|-		\|-
	! Low Power <br> Laser Options		! Low Power <br> Laser Options
	\|colspan="2"\| 5w, ~~808nm~~, ~~AlGaAs~~ Diode and~~/or 6w~~, 450nm, GaN Diode		\|colspan="3"\| 6w, 450nm, GaN Diode and 2w, 450nm GaN Diode
	\|-		\|-
	! High Power <br> Laser Options		! High Power <br> Laser Options
	\| 40w ~10 µm, CO<sub>2</sub>		\| colspan="2" \| 40w ~10 µm, CO<sub>2</sub>
	\| ~~''Not Available''~~		\| (coming soon)
	\|-		\|-
	! Spindle Tool <br> Compatibility		! Spindle Tool <br> Compatibility
	\| colspan="2" \| Standard <br> Three-Phase		\| colspan="3" \| Standard <br> Three-Phase
			\|-
			! Max Axes
			\| colspan="3" \| Max of 5: X, Y, Z<br>Optional 4th A Axis (Lathe)<br>Optional 4/5th Axes (Trunion)
			\|-
			! Pick & Place <br> Compatibility
			\| colspan="3" \| Yes
	\|-		\|-
	! Other <br> Options		! Other <br> Options
	\|colspan="2"\|Quiet Storm Fan, Microscope		\|colspan="3"\|Quiet Storm Fan, Microscope
	\|}		\|}

Davo: /* Comparison */

2021-06-24T13:30:19Z

Comparison

← Older revision		Revision as of 13:30, 24 June 2021
Line 26:		Line 26:
	! Image		! Image
	\| <gallery>File:Hydra_16A.png</gallery>		\| <gallery>File:Hydra_16A.png</gallery>
	\| <gallery>File:~~Hydra_16at~~.png</gallery>		\| <gallery>File:Hydra_16AT.png</gallery>
	\|-		\|-
	! Placement<br>Mechanism		! Placement<br>Mechanism

Davo: /* Comparison */

2021-06-24T13:28:01Z

Comparison

← Older revision		Revision as of 13:28, 24 June 2021
Line 25:		Line 25:
	\|-		\|-
	! Image		! Image
	\| ~~colspan="2"~~ \| <gallery>File:~~Hydra_16A~~.png</gallery>		\| <gallery>File:Hydra_16A.png</gallery>
			\| <gallery>File:Hydra_16at.png</gallery>
	\|-		\|-
	! Placement<br>Mechanism		! Placement<br>Mechanism

Davo: /* Comparison */

2021-06-24T13:26:37Z

Comparison

← Older revision		Revision as of 13:26, 24 June 2021
Line 39:		Line 39:
	! Build Volume		! Build Volume
	\| 16x12x10 in <br> 400x300x250 mm <br> '''or'''<br> 24x16x10 in <br> 600x400x250 mm		\| 16x12x10 in <br> 400x300x250 mm <br> '''or'''<br> 24x16x10 in <br> 600x400x250 mm
	\| 24x16x20 in <br> 600x400x500 mm		\| 16x12x20 in <br> 600x400x500 mm <br> '''or''' <br> 24x16x20 in <br> 600x400x500 mm
	\|-		\|-
	! Bed <br> Temperatures		! Bed <br> Temperatures

Davo: /* Comparison */

2019-08-22T12:44:53Z

Comparison

← Older revision		Revision as of 12:44, 22 August 2019
Line 18:		Line 18:
	! style="width: 20%" colspan="2"\|[[Hydras\|Hydra]] 16A Freestanding <br> Heated		! style="width: 20%" colspan="2"\|[[Hydras\|Hydra]] 16A Freestanding <br> Heated
	\|-		\|-
	! [[Hydras\|Hydra]] ~~16A-S~~<br>''Standard''		! [[Hydras\|Hydra]] 16AS<br>''Standard''
	! [[Hydras\|Hydra]] ~~16A-T~~<br>''Tall''		! [[Hydras\|Hydra]] 16AT<br>''Tall''
	\|-		\|-
	! Target <br> Users		! Target <br> Users
Line 74:		Line 74:
	\| colspan="2" \| Five <br> ''Ten''		\| colspan="2" \| Five <br> ''Ten''
	\|-		\|-
	! ~~Cold Flow <br> Options~~		! colspan="3" \| Accessory Options
	\|colspan="2"\| ~~All [[EMO]], [[COD]], [[SDS]], [[CSD]], DSD and SMH Heads~~
	\|-		\|-
	! ~~Warm Flow <br> Options~~		! [[Reservoir Heads]]
	\|colspan="2"\| All [[VOL]], [[VCD]], [[KRA]] and [[KCD]] Heads		\|colspan="2"\| All [[EMO]], [[COD]], [[SDS]], [[CSD]], DSD, and SMH Heads <br> All [[VOL]], [[VCD]], [[KRA]], and [[KCD]] Heads
	\|-		\|-
	! ~~Hot Flow <br> Options~~		! [[Filament Heads]]
	\|colspan="2"\| All [[MK1-250]], [[MK2-250]] and [[~~MK1~~-450]] Heads		\|colspan="2"\| All [[MK1-250]], [[MK2-250]], [[MK1-450]], [[HT-150]], and [[HT-450]] Heads
	\|-		\|-
	! Low Power <br> Laser Options		! Low Power <br> Laser Options
	\|colspan="2"\| 5w, 808nm, AlGaAs Diode and/or 6w, 450nm, GaN Diode		\|colspan="2"\| 5w, 808nm, AlGaAs Diode and/or 6w, 450nm, GaN Diode

	\|-		\|-
	! High Power <br> Laser Options		! High Power <br> Laser Options
	\| 40w ~10 µm, CO<sub>2</sub>		\| 40w ~10 µm, CO<sub>2</sub>
	\| ''Not ~~Applicable~~''		\| ''Not Available''
	\|-		\|-
	! Spindle Tool <br> Compatibility		! Spindle Tool <br> Compatibility

Davo: /* The Hydra Series */

2018-09-03T15:03:02Z

The Hydra Series

← Older revision		Revision as of 15:03, 3 September 2018
Line 100:		Line 100:
	==== The [[Hydras\|Hydra]] Series ====		==== The [[Hydras\|Hydra]] Series ====

	The [[Hydras\|Hydra]] 16A ~~and 17A~~ models have hard resolution (with encoder feedback) of 20 microns in the X and Y, and 0.8 microns in the Z in standard mode. In microstepping mode, we can achieve soft resolution of 4 microns in the X and Y. It comes standard with two tool positions, but can take additional yokes to handle more.		The [[Hydras\|Hydra]] 16A models have hard resolution (with encoder feedback) of 20 microns in the X and Y, and 0.8 microns in the Z in standard mode. In microstepping mode, we can achieve soft resolution of 4 microns in the X and Y. It comes standard with two tool positions, but can take additional yokes to handle more.

	There are three models, as detailed above. The differences are:		There are three models, as detailed above. The differences are:
Line 113:		Line 113:
	** Can take a bed at 400x300mm or 600x400mm at 120°C or 200°C, or a sub-ambient bed;		** Can take a bed at 400x300mm or 600x400mm at 120°C or 200°C, or a sub-ambient bed;
	** Can take the 5W, 450nm diode laser (NO CO2 LASER);		** Can take the 5W, 450nm diode laser (NO CO2 LASER);
	** Can take the Pick and Place setup; and
	** Can take the 3-Phase and 1-Phase spindle tools.

	* The [[Hydras\|Hydra]] 17A has a 250mm Z and sits on a workbench or countertop, with the following options:
	** Can take a bed at 400x300mm at 120°C or 200°C, or a sub-ambient bed;
	** Can take the 40W CO2 laser and 5W, 450nm diode laser;
	** Can take the Pick and Place setup; and		** Can take the Pick and Place setup; and
	** Can take the 3-Phase and 1-Phase spindle tools.		** Can take the 3-Phase and 1-Phase spindle tools.

	* [[File:Yt.png]] [https://www.youtube.com/watch?v=uACoqtNbXE0 Overview of the [[Hydras\|Hydra]] line]		* [[File:Yt.png]] [https://www.youtube.com/watch?v=uACoqtNbXE0 Overview of the [[Hydras\|Hydra]] line]

Davo: /* Comparison */

2018-09-03T15:01:41Z

Comparison

← Older revision		Revision as of 15:01, 3 September 2018
Line 17:		Line 17:
	! style="width: 10%" rowspan="2"\|Designation		! style="width: 10%" rowspan="2"\|Designation
	! style="width: 20%" colspan="2"\|[[Hydras\|Hydra]] 16A Freestanding <br> Heated		! style="width: 20%" colspan="2"\|[[Hydras\|Hydra]] 16A Freestanding <br> Heated
	~~! style="width: 10%"\|[[Hydras\|Hydra]] 17A Benchtop <br> Heated~~
	\|-		\|-
	! [[Hydras\|Hydra]] 16A-S<br>''Standard''		! [[Hydras\|Hydra]] 16A-S<br>''Standard''
	! [[Hydras\|Hydra]] 16A-T<br>''Tall''		! [[Hydras\|Hydra]] 16A-T<br>''Tall''
	~~! [[Hydras\|Hydra]] 340~~
	\|-		\|-
	! Target <br> Users		! Target <br> Users
	\| colspan="2" \| Industrial Manufacturing		\| colspan="2" \| Industrial Manufacturing
	~~\| Commercial Manufacturing~~
	\|-		\|-
	! Image		! Image
	\| colspan="2" \| <gallery>File:Hydra_16A.png</gallery>		\| colspan="2" \| <gallery>File:Hydra_16A.png</gallery>
	~~\| <gallery>File:17A.png</gallery>~~
	\|-		\|-
	! Placement<br>Mechanism		! Placement<br>Mechanism
	\| colspan="2" \| Freestanding (Floor) Model<br>Gantry Design		\| colspan="2" \| Freestanding (Floor) Model<br>Gantry Design
	~~\| Benchtop Model<br>Gantry Design~~
	\|-		\|-
	! Exterior Dimensions, <br> XxYxZ (closed)		! Exterior Dimensions, <br> XxYxZ (closed)
	\| 48x35x50 in <br> 120x88x125 cm		\| 48x35x50 in <br> 120x88x125 cm
	\| 48x35x60 in <br> 120x88x153 cm		\| 48x35x60 in <br> 120x88x153 cm
	~~\| 41x27x28 in <br> 104x69x71 cm~~
	\|-		\|-
	! Power <br> Requirements		! Power <br> Requirements
	\| colspan="2" \| 15A / 110VAC / 60 Hz <br> 8A / 220VAC / 50Hz		\| colspan="2" \| 15A / 110VAC / 60 Hz <br> 8A / 220VAC / 50Hz
	~~\| 15A / 110VAC / 60 Hz <br> 8A / 220VAC / 50Hz~~
	\|-		\|-
	! Build Volume		! Build Volume
	\| 16x12x10 in <br> 400x300x250 mm <br> '''or'''<br> 24x16x10 in <br> 600x400x250 mm		\| 16x12x10 in <br> 400x300x250 mm <br> '''or'''<br> 24x16x10 in <br> 600x400x250 mm
	\| 24x16x20 in <br> 600x400x500 mm		\| 24x16x20 in <br> 600x400x500 mm
	~~\| 16x12x10 in <br> 400x300x250 mm~~
	\|-		\|-
	! Bed <br> Temperatures		! Bed <br> Temperatures
	\| colspan="2" \| 120°C <br> ''200°C option'' <br> ''sub-ambient option''		\| colspan="2" \| 120°C <br> ''200°C option'' <br> ''sub-ambient option''
	~~\| 120°C <br> ''200°C option''<br> ''sub-ambient option''~~
	\|-		\|-
	! 200°C Hotbed <br> Note		! 200°C Hotbed <br> Note
	\| colspan="3" \| ''Note that 200°C beds larger than 400x300mm require 230VAC for optimal heating.''		\| colspan="2" \| ''Note that 200°C beds larger than 400x300mm require 230VAC for optimal heating.''
	\|-		\|-
	! X/Y Printing<br> Speeds		! X/Y Printing<br> Speeds
	\| colspan="2" \| Up to 50 mm/sec		\| colspan="2" \| Up to 50 mm/sec
	~~\| Up to 50 mm/sec~~
	\|-		\|-
	! Enclosure		! Enclosure
	\| colspan="2" \| Heated to 55°C		\| colspan="2" \| Heated to 55°C
	~~\| Heated to 55°C~~
	\|-		\|-
	! Motion Control		! Motion Control
	\| colspan="2" \| 3-Phase with <br> Closed-Loop Feedback		\| colspan="2" \| 3-Phase with <br> Closed-Loop Feedback
	~~\| 3-Phase with <br> Closed-Loop Feedback~~
	\|-		\|-
	! Positional Resolution <br> X/Y/Z in µm		! Positional Resolution <br> X/Y/Z in µm
	\| colspan="2" \| 6 / 6 / 1		\| colspan="2" \| 6 / 6 / 1
	~~\| 6 / 6 / 1~~
	\|-		\|-
	! Positional Accuracy <br> X/Y/Z in µm		! Positional Accuracy <br> X/Y/Z in µm
	\| colspan="2" \| 60 / 60 / 10		\| colspan="2" \| 60 / 60 / 10
	~~\| 60 / 60 / 10~~
	\|-		\|-
	! Positional Repeatability <br> X/Y/Z in µm		! Positional Repeatability <br> X/Y/Z in µm
	\| colspan="2" \| 60 / 60 / 10		\| colspan="2" \| 60 / 60 / 10
	~~\| 60 / 60 / 10~~
	\|-		\|-
	! Precise X/Y Output <br> for Bioplots		! Precise X/Y Output <br> for Bioplots
	\| colspan="2" \| 100 µm lines <br> 200 µm spacing		\| colspan="2" \| 100 µm lines <br> 200 µm spacing
	~~\| 100 µm lines <br> 200 µm spacing~~
	\|-		\|-
	! Precise Z output <br> for Bioplots		! Precise Z output <br> for Bioplots
	\| colspan="2" \| 25 µm layers		\| colspan="2" \| 25 µm layers
	~~\| 25 µm layers~~
	\|-		\|-
	! Tool Positions <br> ''Optional''		! Tool Positions <br> ''Optional''
	\| colspan="2" \| Five <br> ''Ten''		\| colspan="2" \| Five <br> ''Ten''
	~~\| Five~~
	\|-		\|-
	! Cold Flow <br> Options		! Cold Flow <br> Options
	\|colspan="3"\| All [[EMO]], [[COD]], [[SDS]], [[CSD]], DSD and SMH Heads		\|colspan="2"\| All [[EMO]], [[COD]], [[SDS]], [[CSD]], DSD and SMH Heads
	\|-		\|-
	! Warm Flow <br> Options		! Warm Flow <br> Options
	\|colspan="3"\| All [[VOL]], [[VCD]], [[KRA]] and [[KCD]] Heads		\|colspan="2"\| All [[VOL]], [[VCD]], [[KRA]] and [[KCD]] Heads
	\|-		\|-
	! Hot Flow <br> Options		! Hot Flow <br> Options
	\|colspan="3"\| All [[MK1-250]], [[MK2-250]] and [[MK1-450]] Heads		\|colspan="2"\| All [[MK1-250]], [[MK2-250]] and [[MK1-450]] Heads
	\|-		\|-
	! Low Power <br> Laser Options		! Low Power <br> Laser Options
	\|colspan="3"\| 5w, 808nm, AlGaAs Diode and/or 6w, 450nm, GaN Diode		\|colspan="2"\| 5w, 808nm, AlGaAs Diode and/or 6w, 450nm, GaN Diode

	\|-		\|-
Line 108:		Line 90:
	\| 40w ~10 µm, CO<sub>2</sub>		\| 40w ~10 µm, CO<sub>2</sub>
	\| ''Not Applicable''		\| ''Not Applicable''
	~~\| 40w ~10 µm, CO<sub>2</sub>~~
	\|-		\|-
	! Spindle Tool <br> Compatibility		! Spindle Tool <br> Compatibility
	\| colspan="2" \| Standard <br> Three-Phase		\| colspan="2" \| Standard <br> Three-Phase
	~~\| Standard~~
	\|-		\|-
	! Other <br> Options		! Other <br> Options
	\|colspan="3"\|Quiet Storm Fan, Microscope		\|colspan="2"\|Quiet Storm Fan, Microscope
	\|}		\|}

Davo: /* Comparison */

2018-06-14T18:44:57Z

Comparison

← Older revision		Revision as of 18:44, 14 June 2018
Line 117:		Line 117:
	\|colspan="3"\|Quiet Storm Fan, Microscope		\|colspan="3"\|Quiet Storm Fan, Microscope
	\|}		\|}

			==== The [[Hydras\|Hydra]] Series ====

			The [[Hydras\|Hydra]] 16A and 17A models have hard resolution (with encoder feedback) of 20 microns in the X and Y, and 0.8 microns in the Z in standard mode. In microstepping mode, we can achieve soft resolution of 4 microns in the X and Y. It comes standard with two tool positions, but can take additional yokes to handle more.

			There are three models, as detailed above. The differences are:

			* The [[Hydras\|Hydra]] 16A-S (standard) has a 250mm Z and stands on the floor, with the following options:
			** Can take a bed at 400x300mm or 600x400mm at 120°C or 200°C, or a sub-ambient bed;
			** Can take the 40W CO2 laser and 5W, 450nm diode laser;
			** Can take the Pick and Place setup; and
			** Can take the 3-Phase and 1-Phase spindle tools.

			* The [[Hydras\|Hydra]] 16A-T (tall) has a 500mm Z and stands on the floor, with the following options:
			** Can take a bed at 400x300mm or 600x400mm at 120°C or 200°C, or a sub-ambient bed;
			** Can take the 5W, 450nm diode laser (NO CO2 LASER);
			** Can take the Pick and Place setup; and
			** Can take the 3-Phase and 1-Phase spindle tools.

			* The [[Hydras\|Hydra]] 17A has a 250mm Z and sits on a workbench or countertop, with the following options:
			** Can take a bed at 400x300mm at 120°C or 200°C, or a sub-ambient bed;
			** Can take the 40W CO2 laser and 5W, 450nm diode laser;
			** Can take the Pick and Place setup; and
			** Can take the 3-Phase and 1-Phase spindle tools.

			* [[File:Yt.png]] [https://www.youtube.com/watch?v=uACoqtNbXE0 Overview of the [[Hydras\|Hydra]] line]

Davo: /* Comparison */

2018-06-14T18:44:12Z

Comparison

← Older revision		Revision as of 18:44, 14 June 2018
Line 45:		Line 45:
	\|-		\|-
	! Build Volume		! Build Volume
	~~\| colspan="2"~~ \| 16x12x10 in <br> 400x300x250 mm <br> '''or'''<br> 24x16x10 in <br> 600x400x250 mm		\| 16x12x10 in <br> 400x300x250 mm <br> '''or'''<br> 24x16x10 in <br> 600x400x250 mm
	\| 24x16x20 in <br> 600x400x500 mm		\| 24x16x20 in <br> 600x400x500 mm
			\| 16x12x10 in <br> 400x300x250 mm
	\|-		\|-
	! Bed <br> Temperatures		! Bed <br> Temperatures