Published Papers - Revision history

Admin: /* NTM, 2026 */

2026-09-21T15:51:12Z

NTM, 2026

← Older revision		Revision as of 15:51, 21 September 2026
Line 30:		Line 30:
	== NTM, 2026 ==		== NTM, 2026 ==

			* [https://ieeexplore.ieee.org/abstract/document/11645063 3D Printed Wideband Flexible Carbon-Nanotube and Graphene-Oxide Based Rectangular Patch Antennas Deployable on Deformable Surfaces] by a team from [https://me.umd.edu Department of Mechanical Engineering, University of Maryland College Park]
			* [https://www.tandfonline.com/doi/full/10.1080/17452759.2026.2707717 Non-iterative Inverse Design for 4D Printing via Fabrication-ready Discrete Material Programming] by a team from [https://www4.mae.cuhk.edu.hk Department of Mechanical and Automation Engineering, Chinese University of Hong Kong] and [https://me-english.bit.edu.cn/about/departmentsas/manufacturing/b125928.htm Research Center of Intelligent Manufacturing Technology, Beijing Institute of Technology]
			* [https://www.mdpi.com/2673-3293/7/3/23 Formulation and Characterization of 3D-Printable Nitrogen- and Metal-Doped Carbon Inks for ORR Electrode Applications] by a team from [https://www.lanl.gov Los Alamos National Laboratory]
			* [https://advanced.onlinelibrary.wiley.com/doi/abs/10.1002/admt.71264 4D Printing of Magneto-Active Soft Elastomers via Efficient Active Mixing Direct Ink Writing] by a team from [https://portail.polytechnique.edu/lms/en/overview Laboratoire de Mécanique des Solides (LMS), CNRS, Ecole Polytechnique, Institut Polytechnique de Paris]
			* [https://ieeexplore.ieee.org/abstract/document/11614448/authors#authors Additively Manufactured Colloidal Quantum Dots Embedded Core-Cladding Waveguides for Wavelength-Based Thermal Sensing] by a team from [https://www.jhu.edu Johns Hopkins University]
			* [https://media.springernature.com/original/springer-static/esm/art%3A10.1007%2Fs42114-026-01864-x/MediaObjects/42114_2026_1864_MOESM1_ESM.pdf 3d-Printed Dual-polarity Polymer Composites for Broad-spectrum Volatile Organic Compounds (VOC) Detection] by a team from [https://www.uga.edu University of Georgia, USA] and [https://engineering.asu.edu Arizona State University]
			* [https://www.nature.com/articles/s41467-026-72616-0_reference.pdf Extrusion-printed La<sub>3-x</sub>Te<sub>4</sub> Legs With Interlocking Ni Electrode for High-temperature Thermoelectric Devices] by a team from [https://www.mccormick.northwestern.edu/materials-science/ Department of Materials Science & Engineering, Northwestern University] and [https://www.jpl.nasa.gov/ Thermoelectric and Electrochemical Systems and Technologies Jet Propulsion Laboratory / California Institute of Technology]
			* [https://link.springer.com/article/10.1007/s00289-026-06391-9 Effect of CO2 Laser Treatment on Interfacial Properties of Quartz Fibre for 3D Printed Sandwich Composite] by a team from [https://www.ictmumbai.edu.in/Deptindex.aspx?page=a&ItemID=cg&nDeptID=g Department of Fibres and Textile Processing Technology, Institute of Chemical Technology Mumbai], [https://diat.ac.in/metallurgical-materials-engineering/ Additive Manufacturing Laboratory, Department of Metallurgical and Materials Engineering, Defence Institute of Advanced Technology (DU), Girinagar], [https://www.diatphys.in/ Advanced Laser Laboratory, Department of Applied Physics, Defence Institute of Advanced Technology (DU), Girinagar], and [https://www.srmist.edu.in/department/department-of-mechanical-engineering/ Department of Mechanical Engineering, SRM Institute of Science and Technology, Kattankulathur]
			* [https://www.proquest.com/openview/15d3d0e4f9e0a9041706e34f860ee959/1?pq-origsite=gscholar&cbl=18750&diss=y Printed Flexible High Density and High Frequency Connectors With Active Components Integration], a Master dissertation submitted to the [https://www.uml.edu/ University of Massachusetts (UMass), Lowell Campus]
			* [https://www.science.org/doi/pdf/10.1126/sciadv.aeb2417 Robotic Conformal 4D Printing of Liquid Crystal Elastomers] by a team from the [https://engineering.ucdenver.edu/departments/mechanical-engineering Department of Mechanical Engineering, University of Colorado Denver]
	* [https://carleton.scholaris.ca/items/0b4e329a-343d-4973-b68a-e32447e4f1b5 Rapid Prototyping of a Directly Heated Thermionic Triode Using 3D Printing Techniques], a Masters dissertation submitted to [https://carleton.ca/ Carleton University, Ottawa]		* [https://carleton.scholaris.ca/items/0b4e329a-343d-4973-b68a-e32447e4f1b5 Rapid Prototyping of a Directly Heated Thermionic Triode Using 3D Printing Techniques], a Masters dissertation submitted to [https://carleton.ca/ Carleton University, Ottawa]
	* [https://www.proquest.com/openview/19acbcfd64b5f58cdf5a6ccc878ff5cf/1 AI-driven Quality Prediction in Additive Manufacturing Based on Multimodal Process Monitoring], a PhD dissertation submitted to the [https://www.stevens.edu/ Stevens Institute of Technology]		* [https://www.proquest.com/openview/19acbcfd64b5f58cdf5a6ccc878ff5cf/1 AI-driven Quality Prediction in Additive Manufacturing Based on Multimodal Process Monitoring], a PhD dissertation submitted to the [https://www.stevens.edu/ Stevens Institute of Technology]

Admin at 08:14, 5 February 2026

2026-02-05T08:14:43Z

← Older revision		Revision as of 08:14, 5 February 2026
Line 9:		Line 9:
	== Count ==		== Count ==

	~~671~~ total documents as of ~~30 September~~, ~~2025~~.		701 total documents as of 29 January, 2026.

	== '''Non-Traditional Manufacturing''' ==		== '''Non-Traditional Manufacturing''' ==
Line 27:		Line 27:
	* Shape Memory Polymers		* Shape Memory Polymers
	* And combining two or more additive manufacturing methods in a single build.		* And combining two or more additive manufacturing methods in a single build.

			== NTM, 2026 ==

			* [https://carleton.scholaris.ca/items/0b4e329a-343d-4973-b68a-e32447e4f1b5 Rapid Prototyping of a Directly Heated Thermionic Triode Using 3D Printing Techniques], a Masters dissertation submitted to [https://carleton.ca/ Carleton University, Ottawa]
			* [https://www.proquest.com/openview/19acbcfd64b5f58cdf5a6ccc878ff5cf/1 AI-driven Quality Prediction in Additive Manufacturing Based on Multimodal Process Monitoring], a PhD dissertation submitted to the [https://www.stevens.edu/ Stevens Institute of Technology]

	== NTM, 2025 ==		== NTM, 2025 ==

			* [https://onlinelibrary.wiley.com/doi/abs/10.1002/pat.70439 Microwave-Induced Surface Activation of Aramid Waste for Additively Manufactured Composite Architectures of PETG] by a team from the [https://diat.ac.in/metallurgical-materials-engineering/ Additive Manufacturing Laboratory, Department of Metallurgical and Materials Engineering, Defence Institute of Advanced Technology (DU), Ministry of Defence, Pune, India]
			* [https://4spepublications.onlinelibrary.wiley.com/doi/abs/10.1002/pc.70614 3D Printing of Continuous Carbon Fiber Reinforced Composites With Cyanate Ester Interpenetrating Polymer Networks for Enhanced Thermo-Mechanical Properties] by a team from [https://www.utep.edu/engineering/mechanical/ Department of Aerospace and Mechanical Engineering, The University of Texas at El Paso]
			* [https://journals.sagepub.com/doi/abs/10.1177/1045389X251386918 Additive Manufacturing of Morphing Structures With Multi-stimuli Activation Capabilities] by a team from [https://www.boisestate.edu/ Boise State University] and [https://www.drake.edu/ Drake University]
	* [https://advanced.onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202501686 Encapsulating Laser-Induced Graphene to Preserve its Electrical Properties and Enhance its Mechanical Robustness] by a team from [https://lassonde.yorku.ca/eecs Department of Electrical Engineering and Computer Science, York University, Toronto]		* [https://advanced.onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202501686 Encapsulating Laser-Induced Graphene to Preserve its Electrical Properties and Enhance its Mechanical Robustness] by a team from [https://lassonde.yorku.ca/eecs Department of Electrical Engineering and Computer Science, York University, Toronto]
	* [https://advanced.onlinelibrary.wiley.com/doi/pdf/10.1002/adfm.202519702 Intrinsically Soft Printed Electronics for Digitally Augmented Human Sensing and Vision] by a team from [https://www.gonzaga.edu/ Gonzaga University], [https://www.cmu.edu/ Carnegie Mellon University]. [https://www.uc.pt/en/ University of Coimbra, Portugal], and [https://www.gatech.edu/ Georgia Institute of Technology]		* [https://advanced.onlinelibrary.wiley.com/doi/pdf/10.1002/adfm.202519702 Intrinsically Soft Printed Electronics for Digitally Augmented Human Sensing and Vision] by a team from [https://www.gonzaga.edu/ Gonzaga University], [https://www.cmu.edu/ Carnegie Mellon University]. [https://www.uc.pt/en/ University of Coimbra, Portugal], and [https://www.gatech.edu/ Georgia Institute of Technology]
Line 46:		Line 54:

	[[#top\|Top]]		[[#top\|Top]]


	== NTM, 2024 ==		== NTM, 2024 ==

Admin at 10:56, 3 October 2025

2025-10-03T10:56:00Z

← Older revision		Revision as of 10:56, 3 October 2025
Line 1:		Line 1:
			{\| align="right"
			\| __TOC__
			\|}

			Below is a list of published works citing Hyrel equipment.

			<span style="color: red;">The information for '''Unheated or Chilled Reservoir Printing''', also known as '''Robocasting''' or '''DIW''' (Direct Ink Writing), '''SEP''' (Semisolid Extrusion Printing), '''SSE''' (Semisolid Extrusion). '''3DCP''' (3D Concrete Printing), or '''DCC''' (Digital Concrete Construction), ran too long, and has been split off to the new '''[[Published_Papers_(DIW)\|Published Papers (DIW)]]''' page.</span>

			== Count ==

			671 total documents as of 30 September, 2025.

			== '''Non-Traditional Manufacturing''' ==

			Including:
			* 4D Printing
			* Antennas, Sensors, Batteries, Inductors, and Circuits
			* Electro-Spinning
			* Electro-Melt-Spinning
			* Engineered Living Materials (ELM)
			* Melt Electro-Writing (MEW)
			* Multiphase Direct Ink Writing (MDIW)
			* Nanostructures
			* Micro-Encapsulated Phase-Changing Materials (MEPCM)
			* Plasma Treatments
			* Printing with Embedded Fibers
			* Shape Memory Polymers
			* And combining two or more additive manufacturing methods in a single build.

	== NTM, 2025 ==		== NTM, 2025 ==

Line 17:		Line 46:

	[[#top\|Top]]		[[#top\|Top]]


	== NTM, 2024 ==		== NTM, 2024 ==

Admin at 10:55, 3 October 2025

2025-10-03T10:55:18Z

← Older revision		Revision as of 10:55, 3 October 2025
Line 1:		Line 1:
	~~{\| align="right"~~
	~~\| __TOC__~~
	\|}

	~~Below is a list of published works citing Hyrel equipment.~~

	<span style="color: red;">The pages about '''Unheated or Chilled Reservoir Printing''', also known as '''Robocasting''' or '''DIW''' (Direct Ink Writing), '''SEP''' (Semisolid Extrusion Printing), '''SSE''' (Semisolid Extrusion). '''3DCP''' (3D Concrete Printing), or '''DCC''' (Digital Concrete Construction), ran too long, and have been split off to the new '''[[Published_Papers_(DIW)\|Published Papers (DIW)]]''' page.</span>

	~~== Count ==~~

	~~661 documents as of 27 August, 2025.~~

	~~== '''Non-Traditional Manufacturing''' ==~~

	~~Including:~~
	* 4D Printing
	* Antennas, Sensors, Batteries, Inductors, and Circuits
	* Electro-Spinning
	* Electro-Melt-Spinning
	* Engineered Living Materials (ELM)
	* Melt Electro-Writing (MEW)
	* Multiphase Direct Ink Writing (MDIW)
	* Nanostructures
	* Micro-Encapsulated Phase-Changing Materials (MEPCM)
	* Plasma Treatments
	* Printing with Embedded Fibers
	* Shape Memory Polymers
	* And combining two or more additive manufacturing methods in a single build.

	== NTM, 2025 ==		== NTM, 2025 ==

			* [https://advanced.onlinelibrary.wiley.com/doi/pdf/10.1002/adem.202501686 Encapsulating Laser-Induced Graphene to Preserve its Electrical Properties and Enhance its Mechanical Robustness] by a team from [https://lassonde.yorku.ca/eecs Department of Electrical Engineering and Computer Science, York University, Toronto]
			* [https://advanced.onlinelibrary.wiley.com/doi/pdf/10.1002/adfm.202519702 Intrinsically Soft Printed Electronics for Digitally Augmented Human Sensing and Vision] by a team from [https://www.gonzaga.edu/ Gonzaga University], [https://www.cmu.edu/ Carnegie Mellon University]. [https://www.uc.pt/en/ University of Coimbra, Portugal], and [https://www.gatech.edu/ Georgia Institute of Technology]
	* [https://commons.erau.edu/cgi/viewcontent.cgi?article=1956&context=edt Embeddable Multi-Material Wireless Micro-Sensors Utilizing Additive Manufacturing and Enhanced Microstructure] a thesis submitted to [https://daytonabeach.erau.edu/college-engineering/aerospace Aerospace Engineering program at Embry-Riddle Aeronautical University]		* [https://commons.erau.edu/cgi/viewcontent.cgi?article=1956&context=edt Embeddable Multi-Material Wireless Micro-Sensors Utilizing Additive Manufacturing and Enhanced Microstructure] a thesis submitted to [https://daytonabeach.erau.edu/college-engineering/aerospace Aerospace Engineering program at Embry-Riddle Aeronautical University]
	* [https://pubs.acs.org/doi/abs/10.1021/acsanm.5c02542 Surface Air Plasma Treatment of Laser-Induced Graphene-Based Electrodes for Enhanced Electrochemical Sensing Performance] by a team from [https://lassonde.yorku.ca/ Lassonde School of Engineering, York University, Toronto]		* [https://pubs.acs.org/doi/abs/10.1021/acsanm.5c02542 Surface Air Plasma Treatment of Laser-Induced Graphene-Based Electrodes for Enhanced Electrochemical Sensing Performance] by a team from [https://lassonde.yorku.ca/ Lassonde School of Engineering, York University, Toronto]
Line 42:		Line 15:
	* [https://www.nature.com/articles/s41467-025-56140-1 Time Code for Multifunctional 3D Printhead Controls] by a team from the [https://engineering.jhu.edu/case/ Department of Civil and Systems Engineering, Johns Hopkins University]		* [https://www.nature.com/articles/s41467-025-56140-1 Time Code for Multifunctional 3D Printhead Controls] by a team from the [https://engineering.jhu.edu/case/ Department of Civil and Systems Engineering, Johns Hopkins University]
	* [https://hyrel3d.com/wiki/index.php/Tranining_%26_Support RF Sensitive Sensors, Circuits, and Interconnects Using Additive Materials and Techniques] by a team from [https://www.uml.edu/engineering/electrical-computer/ Department of Electrical Engineering, University of Massachusetts Lowel] and [https://sc.devcom.army.mil/ U.S. Army DEVCOM Soldier Center]		* [https://hyrel3d.com/wiki/index.php/Tranining_%26_Support RF Sensitive Sensors, Circuits, and Interconnects Using Additive Materials and Techniques] by a team from [https://www.uml.edu/engineering/electrical-computer/ Department of Electrical Engineering, University of Massachusetts Lowel] and [https://sc.devcom.army.mil/ U.S. Army DEVCOM Soldier Center]

			[[#top\|Top]]

	== NTM, 2024 ==		== NTM, 2024 ==

Admin at 07:31, 9 September 2025

2025-09-09T07:31:51Z

← Older revision		Revision as of 07:31, 9 September 2025
Line 4:		Line 4:

	Below is a list of published works citing Hyrel equipment.		Below is a list of published works citing Hyrel equipment.

			<span style="color: red;">The pages about '''Unheated or Chilled Reservoir Printing''', also known as '''Robocasting''' or '''DIW''' (Direct Ink Writing), '''SEP''' (Semisolid Extrusion Printing), '''SSE''' (Semisolid Extrusion). '''3DCP''' (3D Concrete Printing), or '''DCC''' (Digital Concrete Construction), ran too long, and have been split off to the new '''[[Published_Papers_(DIW)\|Published Papers (DIW)]]''' page.</span>

	== Count ==		== Count ==

	~~640~~ documents as of ~~16 June~~, 2025.		661 documents as of 27 August, 2025.

	== '''Non-Traditional Manufacturing''' ==		== '''Non-Traditional Manufacturing''' ==
Line 21:		Line 23:
	* Nanostructures		* Nanostructures
	* Micro-Encapsulated Phase-Changing Materials (MEPCM)		* Micro-Encapsulated Phase-Changing Materials (MEPCM)
			* Plasma Treatments
	* Printing with Embedded Fibers		* Printing with Embedded Fibers
	* Shape Memory Polymers		* Shape Memory Polymers
Line 27:		Line 30:
	== NTM, 2025 ==		== NTM, 2025 ==

			* [https://commons.erau.edu/cgi/viewcontent.cgi?article=1956&context=edt Embeddable Multi-Material Wireless Micro-Sensors Utilizing Additive Manufacturing and Enhanced Microstructure] a thesis submitted to [https://daytonabeach.erau.edu/college-engineering/aerospace Aerospace Engineering program at Embry-Riddle Aeronautical University]
			* [https://pubs.acs.org/doi/abs/10.1021/acsanm.5c02542 Surface Air Plasma Treatment of Laser-Induced Graphene-Based Electrodes for Enhanced Electrochemical Sensing Performance] by a team from [https://lassonde.yorku.ca/ Lassonde School of Engineering, York University, Toronto]
			* [https://utoronto.scholaris.ca/server/api/core/bitstreams/f7cf9774-b506-4992-af1c-4c0b100e6af2/content Mechanics and odeling of 3D Printed Metamaterials for Energy Absorption], a thesis paper submitted to the [https://www.mie.utoronto.ca/ Mechanical and Industrial Engineering Department, University of Toronto]
			* [https://www.sciencedirect.com/science/article/abs/pii/S0254058425008272 Advancing 3D-printed Hierarchical Porous Copper Electrodes: Enhancing Performance Through Post-sintering Parameters Optimization] by a team from the [https://iitbhu.ac.in/dept/mec Department of Mechanical Engineering Indian Institute of Technology Banaras Hindu University Varanasi]
			* [https://www.sciencedirect.com/science/article/abs/pii/S1385894725059443 Nb0.8Ti0.2FeSb via Ink Extrusion and Reaction-sintering of Elemental Powders for Half-heusler Thermoelectric Couples] by a team from [https://www.mccormick.northwestern.edu/materials-science/ Materials Science & Engineering, Northwestern University]
	* [https://www.sciencedirect.com/science/article/abs/pii/S2352152X25017402 Advanced Lithium Metal Battery: Enhancing Electrochemical Performance With 3D-printed Hierarchically Porous Copper Collectors] by a team from the [https://www.iitbhu.ac.in/dept/mec Department of Mechanical Engineering, Indian Institute of Technology, Banaras Hindu University]		* [https://www.sciencedirect.com/science/article/abs/pii/S2352152X25017402 Advanced Lithium Metal Battery: Enhancing Electrochemical Performance With 3D-printed Hierarchically Porous Copper Collectors] by a team from the [https://www.iitbhu.ac.in/dept/mec Department of Mechanical Engineering, Indian Institute of Technology, Banaras Hindu University]
	* [https://papers.ssrn.com/sol3/papers.cfm?abstract_id=4815534 Topological Optimization of Flexible Supercapacitor Electrodes through Modelling and Direct Ink 3D-Writing] by a team from [http://www.metal.iitkgp.ac.in Metallurgical and Materials Engineering, Indian Institute of Technology, Kharagpur]		* [https://papers.ssrn.com/sol3/papers.cfm?abstract_id=4815534 Topological Optimization of Flexible Supercapacitor Electrodes through Modelling and Direct Ink 3D-Writing] by a team from [http://www.metal.iitkgp.ac.in Metallurgical and Materials Engineering, Indian Institute of Technology, Kharagpur]

Admin at 10:10, 19 June 2025

2025-06-19T10:10:03Z

← Older revision		Revision as of 10:10, 19 June 2025
Line 7:		Line 7:
	== Count ==		== Count ==

	~~567~~ documents as of ~~25 September~~, ~~2024~~.		640 documents as of 16 June, 2025.

	== '''Non-Traditional Manufacturing ~~(NTM)~~''' ==		== '''Non-Traditional Manufacturing''' ==

	Including:		Including:
	* ~~Antennas~~		* 4D Printing
	* Sensors		* Antennas, Sensors, Batteries, Inductors, and Circuits
	* Inductors
	* Circuits
	* Electro-Spinning		* Electro-Spinning
	* Electro-Melt-Spinning		* Electro-Melt-Spinning
			* Engineered Living Materials (ELM)
	* Melt Electro-Writing (MEW)		* Melt Electro-Writing (MEW)
	* ~~4D Printing~~		* Multiphase Direct Ink Writing (MDIW)
	* Shape Memory Polymers
	* Nanostructures		* Nanostructures
	* Micro-Encapsulated Phase-Changing Materials (MEPCM)		* Micro-Encapsulated Phase-Changing Materials (MEPCM)
	* Printing with Embedded Fibers		* Printing with Embedded Fibers
			* Shape Memory Polymers
	* And combining two or more additive manufacturing methods in a single build.		* And combining two or more additive manufacturing methods in a single build.

			== NTM, 2025 ==

			* [https://www.sciencedirect.com/science/article/abs/pii/S2352152X25017402 Advanced Lithium Metal Battery: Enhancing Electrochemical Performance With 3D-printed Hierarchically Porous Copper Collectors] by a team from the [https://www.iitbhu.ac.in/dept/mec Department of Mechanical Engineering, Indian Institute of Technology, Banaras Hindu University]
			* [https://papers.ssrn.com/sol3/papers.cfm?abstract_id=4815534 Topological Optimization of Flexible Supercapacitor Electrodes through Modelling and Direct Ink 3D-Writing] by a team from [http://www.metal.iitkgp.ac.in Metallurgical and Materials Engineering, Indian Institute of Technology, Kharagpur]
			* [https://pubs.acs.org/doi/10.1021/acsami.4c18528 Biomimetic 3D Prototyping of Hierarchically Porous Multilayered Membranes for Enhanced Oil–Water Filtration] by a team from [https://semte.engineering.asu.edu/ Materials Science and Engineering, School for Engineering of Matter, Transport and Energy (SEMTE), Ira A. Fulton Schools of Engineering, Arizona State University], [https://www.qu.edu.qa/en-us/research/cam/ Center for Advanced Materials, Qatar University], [https://engineering.uga.edu/ Mechanical Engineering, College of Engineering, University of Georgia], and [https://me.berkeley.edu/ Department of Mechanical Engineering, University of California, Berkeley]
			* [https://www.biorxiv.org/content/10.1101/2025.01.21.634218v1.full.pdf De novo Autogenic Engineered Living Functional Materials] by a team from [https://www.bse.vt.edu/ Department of Biological Systems Engineering, Virginia Tech] and [https://cos.northeastern.edu/chemistry-chemical-biology/ Department of Chemistry and Chemical Biology, Northeastern University, Boston]
			* [https://escholarship.org/uc/item/3jk4s482 Thermal Characterization of Novel Electrodes and Modeling of Novel Characterization Methods for Electrochemical Energy Storage Systems], a PhD thesis submitted to [https://grad.ucla.edu/programs/school-of-engineering-and-applied-science/mechanical-aerospace-engineering-department/ Mechanical & Aerospace Engineering Department of UCLA]
			* [https://www.nature.com/articles/s41467-025-56140-1 Time Code for Multifunctional 3D Printhead Controls] by a team from the [https://engineering.jhu.edu/case/ Department of Civil and Systems Engineering, Johns Hopkins University]
			* [https://hyrel3d.com/wiki/index.php/Tranining_%26_Support RF Sensitive Sensors, Circuits, and Interconnects Using Additive Materials and Techniques] by a team from [https://www.uml.edu/engineering/electrical-computer/ Department of Electrical Engineering, University of Massachusetts Lowel] and [https://sc.devcom.army.mil/ U.S. Army DEVCOM Soldier Center]

	== NTM, 2024 ==		== NTM, 2024 ==

Admin: /* Count */

2024-10-04T09:59:17Z

Count

← Older revision		Revision as of 09:59, 4 October 2024
Line 7:		Line 7:
	== Count ==		== Count ==

	~~486~~ documents as of ~~8 December~~, ~~2023~~.		567 documents as of 25 September, 2024.

	== '''Non-Traditional Manufacturing (NTM)''' ==		== '''Non-Traditional Manufacturing (NTM)''' ==

Admin at 09:58, 4 October 2024

2024-10-04T09:58:27Z

← Older revision		Revision as of 09:58, 4 October 2024
Line 622:		Line 622:

	Also known as '''FFF''' (Fused Filament Fabrication) or '''FDM''' (Fused Deposition Modeling).		Also known as '''FFF''' (Fused Filament Fabrication) or '''FDM''' (Fused Deposition Modeling).

			== FDM/FFF, 2024 ==

			* [https://link.springer.com/article/10.1557/s43577-024-00756-z Novel Production Strategy of Drug-encapsulated Biodegradable Scaffolds for Remediation of Hidradenitis Suppurativa] by a team from [https://www.gtu.edu.tr/en/kategori/2203/3/display.aspx Institute of Biotechnology, Gebze Technical University, Turkey], [https://bme.unc.edu/ Joint Department of Biomedical Engineering, University of North Carolina at Chapel Hill], and multiple departments of both [https://www.uml.edu/ University of Massachusetts, Lowell] and [https://www.marmara.edu.tr/en Marmara University, Turkey]
			* [https://link.springer.com/article/10.1007/s42247-024-00711-3 3D-printed Polylactic Acid (Pla)/polymethyl Silsesquioxane (Pmsq)-based Scaffolds Coated With Vitamin E Microparticles for the Application of Wound Healing] by a team from [https://www.marmara.edu.tr/en Marmara University, Turkey], [https://uskudar.edu.tr/en Üsküdar University, Turkey], [https://www.tuseb.gov.tr/en Health Institutes of Türkiye (TUSEB), Turkey], [https://www.iuc.edu.tr/en/ Istanbul University-Cerrahpasa, Turkey], and [https://gelisim.edu.tr/en/gelisim-homepage Istanbul Gelisim University, Turkey]
			* [https://iopscience.iop.org/article/10.1088/2631-8695/ad2e51/meta Programmable Cell Unit Arrangement of 3D Printing Mechanical Metamaterial Undergoing Tailorable Local Instability] by a team from [http://www.hrbust.edu.cn Harbin University of Science and Technology]

	== FDM/HFF, 2023 ==		== FDM/HFF, 2023 ==

Admin at 09:56, 4 October 2024

2024-10-04T09:56:50Z

← Older revision		Revision as of 09:56, 4 October 2024
Line 525:		Line 525:

	Also known as '''DPE''' (Direct Powder Extrusion) or '''HME''' (Hot Melt Extrusion).		Also known as '''DPE''' (Direct Powder Extrusion) or '''HME''' (Hot Melt Extrusion).

			== [[Reservoir_Heads\|DPE, HME 2024]] ==

			* [https://pubs.acs.org/doi/full/10.1021/acsomega.4c05664 3D Printing of Thermally Responsive Shape Memory Liquid Crystalline Epoxy Networks] by a team from [https://tickle.utk.edu/mse/ Department of Materials Science and Engineering, The University of Tennessee, Knoxville], [http://en.mse.ustb.edu.cn/ School of Materials Science and Engineering, University of Science and Technology, Beijing], [https://neutrons.ornl.gov/sns Spallation Neutron Source, Oak Ridge National Laboratory], and [https://crc.tennessee.edu/ Center for Renewable Carbon, University of Tennessee, Knoxville]
			* [https://pubs.acs.org/doi/full/10.1021/acsaenm.4c00158 Thermal Weathering of 3D-Printed Lunar Regolith Simulant Composites] by a team from [https://jseg.space Jacobs Space Exploration Group, NASA Marshall Space Flight Center] and from several departments of [https://www.gatech.edu/ Georgia Institute of Technology (GATECH)]
			* [https://onlinelibrary.wiley.com/doi/abs/10.1002/app.55423 3D Printing of Cyanate Ester Resins With Interpenetration Networks for Enhanced Thermal and Mechanical Properties] by a team from the [https://www.utep.edu/ University of Texas at El Paso]
			* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/65f1e6239138d231616557e8/original/bio-inspired-3d-printing-of-layered-structures-utilizing-stabilized-amorphous-calcium-carbonate-within-biodegradable-matrices.pdf Bio-Inspired 3D Printing of Layered Structures Utilizing Stabilized Amorphous Calcium Carbonate within Biodegradable Matrices] by a team from the [https://int.technion.ac.il/programs/graduate-school/materials-science-and-engineering/ Department of Materials Science and Engineering] and the [https://rbni.technion.ac.il/ Russell Berrie Nanotechnology Institute] of [https://www.technion.ac.il/en/home-2/ Technion, the Israel Institute of Technology]
			* [https://www.mdpi.com/1999-4923/16/4/437 3D Printing Direct Powder Extrusion in the Production of Drug Delivery Systems: State of the Art and Future Perspectives] by the [http://farmacia.us.es/portal/ Department of Pharmacy and Pharmaceutical Technology, Faculty of Pharmacy, Universidad de Sevilla]
			* [https://www.mdpi.com/1999-4923/16/4/441/pdf&hl=en&sa=X&d=3300068694145389111&ei=7r8AZrbdFtGcy9YPk4yogAU&scisig=AFWwaeYAnwMJiM_DsBJYoKmbfDwX&oi=scholaralrt&hist=QZPgiEkAAAAJ:18370435948786443487:AFWwaeaEM0xeEgrLLW3xIdc2G8Zs&html=&pos=1&folt=kw Pediatric Formulations Developed by Extrusion-Based 3D Printing: From Past Discoveries to Future Prospects] by a team from [https://utcbs.u-paris.fr/en/about-us/ CNRS, INSERM, Chemical and Biological Technologies for Health Group (UTCBS), Université Paris Cité] and [https://www.delpharm.com/ Delpharm Reims,]
			* [https://chemrxiv.org/engage/api-gateway/chemrxiv/assets/orp/resource/item/65f1e6239138d231616557e8/original/bio-inspired-3d-printing-of-layered-structures-utilizing-stabilized-amorphous-calcium-carbonate-within-biodegradable-matrices.pdf Bio-inspired 3D-printing of Layered Amorphous Calcium Carbonate Composites] by a team from [https://www.technion.ac.il/en/home-2/ Technion - Israel Institute of Technology]

	== [[Reservoir_Heads\|DPE, HME 2023]] ==		== [[Reservoir_Heads\|DPE, HME 2023]] ==

Admin: /* DIW/SEP/SSE, 2023 */

2024-10-04T09:48:49Z

DIW/SEP/SSE, 2023

← Older revision		Revision as of 09:48, 4 October 2024
Line 210:		Line 210:
	== DIW/SEP/SSE, 2023 ==		== DIW/SEP/SSE, 2023 ==

			* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from [https://www.brown.edu/ Brown University], [https://www.vt.edu/ Virginia Tech], and [https://www.unl.edu/ University of Nebraska–Lincoln]
			* [https://link.springer.com/article/10.1007/s40820-023-01286-0 Engineering Nano/Microscale Chiral Self-Assembly in 3D Printed Constructs] by a team from the University of South Carolina's [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/chemical_engineering/index.php Department of Chemical Engineering] and [https://sc.edu/study/colleges_schools/engineering_and_computing/departments/biomedical_engineering/index.php Biomedical Engineering Program] and from [https://www.tainstruments.com/ TA Instruments]
			* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005481 Design and Fabrication of Flexible Woodpile Structured Nanocomposite for Microwave Absorption Using Material Extrusion Additive Technique] by a team from the [https://mechanical.iitism.ac.in/ Department of Mechanical Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad]
			* [https://www.sciencedirect.com/science/article/pii/S2352940723002834 Towards a Predictive Understanding of Direct Ink Writing of Graphene-based Inks] by a team from several departments of [https://www.tue.nl/en/ Eindhoven University of Technology]
			* [https://pubs.rsc.org/en/content/articlehtml/2024/lp/d3lp00200d Direct Ink Writing of Polyimide Aerogels for Battery Thermal Mitigation] by a team from [https://www.tamu.edu Texas A&M University] and the [https://www.nasa.gov/glenn/ NASA Glenn Research Center]
			* [https://www.sciencedirect.com/science/article/abs/pii/S2214860423005389 Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing] by a team from several departments of [https://www.vt.edu/ Virginia Tech], [https://www.brown.edu/ Brown University], and [https://www.unl.edu/ University of Nebraska–Lincoln]
			* [https://www.osti.gov/servlets/purl/2205716 Development of 3d Printing Techniques for Solid-state Lithium Batteries] by a team from [https://www.llnl.gov/ Lawrence Livermore National Laboratory]
	* [https://www.taylorfrancis.com/chapters/edit/10.1201/9781003258353-5/processing-bioceramics-additive-manufacturing-david-orisekeh-jahan Processing of Bioceramics by Additive Manufacturing], affiliation unknown		* [https://www.taylorfrancis.com/chapters/edit/10.1201/9781003258353-5/processing-bioceramics-additive-manufacturing-david-orisekeh-jahan Processing of Bioceramics by Additive Manufacturing], affiliation unknown
	* [https://link.springer.com/chapter/10.1007/978-3-031-46015-9_8 Semisolid Extrusion Printing and 3D Bioprinting] by a team from [https://pharmacy.utexas.edu/ College of Pharmacy, The University of Texas at Austin] and [https://pharmacy.olemiss.edu/ School of Pharmacy, University of Mississippi]		* [https://link.springer.com/chapter/10.1007/978-3-031-46015-9_8 Semisolid Extrusion Printing and 3D Bioprinting] by a team from [https://pharmacy.utexas.edu/ College of Pharmacy, The University of Texas at Austin] and [https://pharmacy.olemiss.edu/ School of Pharmacy, University of Mississippi]