Difference between revisions of "Emulsifiables"

From Hyrel3D
Jump to navigation Jump to search
(Redirected page to Cold and Warm Flow)
 
(3 intermediate revisions by the same user not shown)
Line 1: Line 1:
[[Category:Settings]]
#REDIRECT [[Cold_and_Warm_Flow]]
[[Category:EMO-Type]]
{| align="right"
| __TOC__
|}
 
== Overview ==
 
EMO-Type heads are for printing as follows:
 
* With pastes, gels, emulsifiables or waxes.
* At room or elevated temperatures.
* With or without UV Crosslining.
* With Hyrel Nozzles (1.5mm, 2mm) or Luer Tips.
 
These include the following:
 
{| border="1" class="wikitable" style="text-align: center"
|+ EMO-Type Head Comparison
! Temperature
! Ambient
! Up to 75°C
! Up to 100°C
! Up to 150°C
|-
! No Crosslinking
| EMO-25 <br>
SDS-5, -10, -30, -60
| VSD-5, -10, -30, -60
| VOL-25
| KRA-15
|-
! With Crosslinking
| COD-25 <br>
CSD-5, -10, -30, -60
| VCS-5, -10, -30, -60
| VCD-25
|KCD-15
|}
 
So, what do these goofy designations actually stand for?
 
:EMO: Emulsifiables at Room Temperature
:COD: Emulsifiables T Room Temperature with Crosslink On Demand
:VOL: Volcano: Heated (up to 100°C) Emulsifiables
:VCD: Volcanic Crosslink on Demand
:KRA: Krakatoa: Heated (up to 150°C) Emulsifiables
:KCD: Krakatoic Crosslink on Demand
:KR2: Krakatoa v2: a more robust KRA head with a double gasketed plunger hotter, more viscous Emulsifiables
:SDS: Syringe Dispensing System (uses disposable plastic syringes at room temperature)
:CSD: Crosslinking Syringe Dispensing System
:VSD: Volcanic Syringe Dispensing System
:CVS: Crosslinking Volcanic Syringe Dispensing System
:DSD: Dual Syringe Dispenser, dispensing two-part mixtures at a fixed ratio
 
As of Sep 2016, the latest firmware is 32V, included with Repetrel 2.828.
 
== Settings ==
 
Some settings for the EMO-Type heads (like temperature, prime/unprime values) will vary, depending on what material you are printing with. Nozzle diameter should accurately reflect what nozzle you have loaded (1.6mm is default) AND what path width you sliced for. Temperature commands will be ignored by heads with no temperature control. Having said that, here are our default shipping settings:
 
{| class="wikitable" style="text-align: center;"
|+ EMO-Type Head Comparison
! rowspan="2" style="width: 15%" | Settings
! colspan="5" | EMO, VOL, KRA, COD, VCD, KCD Heads ''and New KR2''<br> (17mm Tubes, Various Gear Ratios)
! colspan="4" | SDS, CSD, VSD, and CVS Heads <br> (Various Tube Diameters, Standard Gear Ratios)
! colspan="1" | DSD-30 (1:1)
|-
! style="width: 10%" | 19:1 Ratio
! style="width: 10%" | 27:1 Ratio
! style="width: 10%" | 51:1 Ratio
! style="width: 10%" | 100:1 Ratio
! style="width: 10%" | 100:1 KR2
! style="width: 10%" | 5cc
! style="width: 10%" | 10cc
! style="width: 10%" | 30cc
! style="width: 10%" | 60cc
! style="width: 10%" | DSD-30
|-
!colspan="11"| Material
|-
! Type
| Custom
| Custom
| Custom
| Custom
| Custom
| Custom
| Custom
| Custom
| Custom
| Custom
|-
! Color
| (any)
| (any)
| (any)
| (any)
| (any)
| (any)
| (any)
| (any)
| (any)
| (any)
|-
! Nozzle
| 1.600
| 1.600
| 1.600
| 1.600
| 1.600
| 1.600
| 1.600
| 1.600
| 1.600
| 1.600
|-
! Layer
| 0.300
| 0.300
| 0.300
| 0.300
| 0.300
| 0.300
| 0.300
| 0.300
| 0.300
| 0.300
|-
!colspan="11"| Temp Info
|-
! Print Temp
| 35
| 35
| 35
| 35
| 35
| 0
| 0
| 0
| 0
| 0
|-
! Power Factor
| 100
| 100
| 100
| 100
| 100
| 100
| 100
| 100
| 100
| 100
|-
! Minimum
| 0
| 0
| 0
| 0
| 0
| 0
| 0
| 0
| 0
| 0
|-
! Maximum
| 0/100/200
| 0/100/200
| 0/100/200
| 0/100/200
| 0/100/200
| 0
| 0
| 0
| 0
| 0
|-
!colspan="11"| Overrides
|-
! Pulses
| 1.600
| 2.300
| 4.700
| 8.500
| 14.750
| 0.750
| 0.580*
| 0.225
| 0.150
| 0.150
|-
! Feed Rate %
| 1.000
| 1.000
| 1.000
| 1.000
| 1.000
| 1.000
| 1.000
| 1.000
| 1.000
| 1.000
|-
|colspan="11"| '''Prime''' <br> ''Please note that Prime values will vary greatly from those shown, depending on the compressibility of your material.''
|-
! Steps
| 600
| 700
| 1000
| 4000
| 6000
| 200
| 200
| 300
| 500
| 500
|-
! Rate
| 10,000
| 10,000
| 10,000
| 10,000
| 10,000
| 10,000
| 10,000
| 10,000
| 10,000
| 10,000
|-
! Dwell Time (ms)
| 100
| 100
| 110
| 120
| 200
| 100
| 100
| 100
| 100
| 1000
|-
! Before Tool Change
| 1
| 1
| 1
| 1
| 1
| 1
| 1
| 1
| 1
| 1
|-
|colspan="11"| '''Unprime'''  <br> ''Please note that Unprime values will vary greatly from those shown, depending on the compressibility of your material.''
|-
! Steps
| 500
| 550
| 800
| 3500
| 5000
| 160
| 160
| 225
| 400
| 400
|-
! Rate
| 10,000
| 10,000
| 10,000
| 10,000
| 10,000
| 10,000
| 10,000
| 10,000
| 10,000
| 10,000
|-
! Dwell Time (ms)
| 100
| 100
| 100
| 110
| 200
| 100
| 100
| 100
| 100
| 1000
|-
! After Tool Change
| 1
| 1
| 1
| 1
| 1
| 1
| 1
| 1
| 1
| 1
|-
!colspan="11"| Offsets
|-
! Clone Head
| Off
| Off
| Off
| Off
| Off
| Off
| Off
| Off
| Off
| Off
|-
! X
| 0,000
| 0,000
| 0,000
| 0,000
| 0,000
| 0,000
| 0,000
| 0,000
| 0,000
| 0,000
|-
! Y
| 0,000
| 0,000
| 0,000
| 0,000
| 0,000
| 0,000
| 0,000
| 0,000
| 0,000
| 0,000
|-
! Z
| 0,000
| 0,000
| 0,000
| 0,000
| 0,000
| 0,000
| 0,000
| 0,000
| 0,000
| 0,000
|-
!colspan="11"| Head Info
|-
! Model
| (varies)
| (varies)
| (varies)
| (varies)
| (varies)
| (varies)
| (varies)
| (varies)
| (varies)
| (varies)
|-
! RTD Type
| 1k PLAT_RTD
| 1k PLAT_RTD
| 1k PLAT_RTD
| 1k PLAT_RTD
| 1k PLAT_RTD
| 1k PLAT_RTD
| 1k PLAT_RTD
| 1k PLAT_RTD
| 1k PLAT_RTD
| 1k PLAT_RTD
|-
! Motor Current
| High
| High
| High
| High
| High
| High
| High
| High
| High
| High
|-
! Step Mode
| Sixteenth
| Sixteenth
| Sixteenth
| Sixteenth
| Sixteenth
| Sixteenth
| Sixteenth
| Sixteenth
| Sixteenth
| Sixteenth
|-
|colspan="12"| ''* Thanks to Yasmine at VT for the precise calculation.''
|-
 
|}

Latest revision as of 12:04, 8 November 2016

Redirect to:

Retrieved from "https://hyrel3d.in/wiki/index.php?title=Emulsifiables&oldid=1021"