Difference between revisions of "Materials"
Jump to navigation
Jump to search
| Line 14: | Line 14: | ||
! Fan %* | ! Fan %* | ||
! HotBed (°C) | ! HotBed (°C) | ||
! v2.x mm/ | ! v2.x mm/min | ||
! v3/4.x mm/ | ! v3/4.x mm/min | ||
|- | |- | ||
! [http://en.wikipedia.org/wiki/Acrylonitrile_butadiene_styrene ABS] | ! [http://en.wikipedia.org/wiki/Acrylonitrile_butadiene_styrene ABS] | ||
| Line 51: | Line 51: | ||
|- | |- | ||
! [http://en.wikipedia.org/wiki/Clay Clay] | ! [http://en.wikipedia.org/wiki/Clay Clay] | ||
| [[EMO-25]] || n/a || n/a || n/a || | | [[EMO-25]] || n/a || n/a || n/a || 20 || 20 | ||
|- | |- | ||
! [http://en.wikipedia.org/wiki/Metal_clay Metal Clay], <br/> [http://en.wikipedia.org/wiki/Metal_clay#Precious_Metal_Clay_.28PMC.29 Precious Metal Clay] | ! [http://en.wikipedia.org/wiki/Metal_clay Metal Clay], <br/> [http://en.wikipedia.org/wiki/Metal_clay#Precious_Metal_Clay_.28PMC.29 Precious Metal Clay] | ||
| [[EMO-25]] || n/a || n/a || n/a || | | [[EMO-25]] || n/a || n/a || n/a || 20 || 20 | ||
|- | |- | ||
! [http://en.wikipedia.org/wiki/Polypropylene Polypropylene] | ! [http://en.wikipedia.org/wiki/Polypropylene Polypropylene] | ||
| Line 63: | Line 63: | ||
|- | |- | ||
! [http://en.wikipedia.org/wiki/Porcelain Porcelain] | ! [http://en.wikipedia.org/wiki/Porcelain Porcelain] | ||
| [[EMO-25]] || n/a || n/a || n/a || | | [[EMO-25]] || n/a || n/a || n/a || 20 || 20 | ||
|- | |- | ||
! [http://en.wikipedia.org/wiki/Plasticine Plasticine] | ! [http://en.wikipedia.org/wiki/Plasticine Plasticine] | ||
| [[EMO-25]] || n/a || n/a || n/a || | | [[EMO-25]] || n/a || n/a || n/a || 500 || 500 | ||
|- | |- | ||
! [http://www.hasbro.com/playdoh/en_AU/ Play-Doh] | ! [http://www.hasbro.com/playdoh/en_AU/ Play-Doh] | ||
| [[EMO-25]] || n/a || n/a || n/a || | | [[EMO-25]] || n/a || n/a || n/a || 250 || 250 | ||
|- | |- | ||
! [http://www.sculpey.com/ Sculpey] | ! [http://www.sculpey.com/ Sculpey] | ||
| [[EMO-25]] ||| n/a || n/a || n/a || | | [[EMO-25]] ||| n/a || n/a || n/a || 250 || 250 | ||
|- | |- | ||
! [https://sugru.com/ Sugru] | ! [https://sugru.com/ Sugru] | ||
| [[EMO-25]] || n/a || n/a || n/a || | | [[EMO-25]] || n/a || n/a || n/a || 250 || 250 | ||
|- | |- | ||
! [http://en.wikipedia.org/wiki/RTV_silicone RTV Silicone] | ! [http://en.wikipedia.org/wiki/RTV_silicone RTV Silicone] | ||
| [[EMO-25]] ||| n/a || n/a || n/a || | | [[EMO-25]] ||| n/a || n/a || n/a || 250 || 250 | ||
|- | |||
! [http://en.wikipedia.org/wiki/Flex45 Flex45] | |||
| [[head]] ||| temp|| fan || bed || v2|| v4 | |||
|- | |||
! [http://en.wikipedia.org/wiki/HIPS HIPS] | |||
| [[head]] ||| temp|| fan || bed || v2|| v4 | |||
|- | |||
! [http://en.wikipedia.org/wiki/NoldLay Moldlay] | |||
| [[head]] ||| temp|| fan || bed || v2|| v4 | |||
|- | |||
! [http://en.wikipedia.org/wiki/PETG PETG] | |||
| [[head]] ||| temp|| fan || bed || v2|| v4 | |||
|- | |||
! [http://en.wikipedia.org/wiki/PEG PEG] | |||
| [[head]] ||| temp|| fan || bed || v2|| v4 | |||
|- | |||
! [http://en.wikipedia.org/wiki/PEEK PEEK] | |||
| [[head]] ||| temp|| fan || bed || v2|| v4 | |||
|- | |||
! [http://en.wikipedia.org/wiki/Wax_(molten) Wax (molten)] | |||
| [[head]] ||| temp|| fan || bed || v2|| v4 | |||
|- | |||
! [http://en.wikipedia.org/wiki/Wax_(filament) Wax (filament)] | |||
| [[head]] ||| temp|| fan || bed || v2|| v4 | |||
|- | |||
! [http://en.wikipedia.org/wiki/PCL PCL] | |||
| [[head]] ||| temp|| fan || bed || v2|| v4 | |||
|- | |- | ||
|} | |} | ||
Revision as of 22:33, 1 February 2018
A huge variety of materials can be printed with various extruders on the Hyrel machines. Below are the recipes we have so far...
Materials Printable on Hyrel Machines
The following is a list of materials with which the Hyrel machines can print; you can sort by any column:
| Material | Extruder | Head (°C) | Fan %* | HotBed (°C) | v2.x mm/min | v3/4.x mm/min |
|---|---|---|---|---|---|---|
| ABS | MK1-250 | 240/235 | 10 (=25.5%) | 80 | 2000 | 4000 |
| PLA | MK1-250 | 185/180 | 10 (=25.5%) | 40 | 2000 | 4000 |
| PlastInk Rubber | MK1-250 | 225 | 10 (=25.5%) | 50 | 2000 | 4000 |
| NinjaFlex | MK1-250 | 225 | 10 (=25.5%) | 50 | 2000 | 4000 |
| Nylon | MK1-250 | 225 | 10 (=25.5%) | 80 | 2000 | 4000 |
| T-Glase | MK1-250 | 225 | 10 (=25.5%) | 80 | 2000 | 4000 |
| BendLay | MK1-250 | 225 | 10 (=25.5%) | 50 | 500 | 500 |
| LayBrick | MK1-250 | 225 | 10 (=25.5%) | 80 | 500 | 500 |
| LayWoo-d3 | MK1-250 | 220/205 | 10 (=25.5%) | 80 | 2000 | 4000 |
| PET | MK1-250 | 210 | 10 (=25.5%) | 40 | 500 | 500 |
| PVA | MK1-250 | 210 | 10 (=25.5%) | 40 | 500 | 500 |
| Clay | EMO-25 | n/a | n/a | n/a | 20 | 20 |
| Metal Clay, Precious Metal Clay |
EMO-25 | n/a | n/a | n/a | 20 | 20 |
| Polypropylene | MK1-250 | 235 | 10 (=25.5%) | 80 | 2000 | 4000 |
| Polycarbonate | MK1-350 | 350 | 10 (=25.5%) | 80 | 2000 | 4000 |
| Porcelain | EMO-25 | n/a | n/a | n/a | 20 | 20 |
| Plasticine | EMO-25 | n/a | n/a | n/a | 500 | 500 |
| Play-Doh | EMO-25 | n/a | n/a | n/a | 250 | 250 |
| Sculpey | EMO-25 | n/a | n/a | n/a | 250 | 250 |
| Sugru | EMO-25 | n/a | n/a | n/a | 250 | 250 |
| RTV Silicone | EMO-25 | n/a | n/a | n/a | 250 | 250 |
| Flex45 | head | temp | fan | bed | v2 | v4 |
| HIPS | head | temp | fan | bed | v2 | v4 |
| Moldlay | head | temp | fan | bed | v2 | v4 |
| PETG | head | temp | fan | bed | v2 | v4 |
| PEG | head | temp | fan | bed | v2 | v4 |
| PEEK | head | temp | fan | bed | v2 | v4 |
| Wax (molten) | head | temp | fan | bed | v2 | v4 |
| Wax (filament) | head | temp | fan | bed | v2 | v4 |
| PCL | head | temp | fan | bed | v2 | v4 |
- Note: Be sure the fan directs air to the material and not directly at the nozzle.
- Note: In Slic3r, you should slice with a fan value between 0 and 39, which will result in a fan speed between 0 and 99, since we have our fans run between 0 and 100, not between 0 and 255 like other printers. Also note that we leave the fan OFF for the first five layers.