Emulsifiables

EMO-Type heads are for printing as follows:

• With pastes, gels, emulsifiables or waxes.
• At room or elevated temperatures.
• With or without UV Crosslining.
• With Hyrel Nozzles (1.5mm, 2mm) or Luer Tips.

These include the following:

EMO-Type Head Comparison

Model	EMO-25	COD-25	VOL-25	VCD-25	KRA-15	KCD-15
Max Temp	Ambient	Ambient	100°C	100°C	150°C	150°C
UV Crosslinking	no	yes	no	yes	no	yes

Settings for these heads (based on planetary gear ratios) are as follows; you will need to adjust these for the qualities of your print media:

EMO-Type Head Settings

Gear Reduction	Overrides		Prime		Unprime
	Pulses	FR%	Steps	Dwell	Steps	Dwell
19:1	1.600	1.000	500	100	400	100
27:1	2.300	1.000	700	100	550	100
51:1	4.700	1.000	900	110	750	105
100:1	8.750	1.000	2000	120	1600	110