Difference between revisions of "Emulsifiables"
Jump to navigation
Jump to search
| Line 60: | Line 60: | ||
| 8.750|| 1.000 || 2000|| 120 || 1600|| 110 | | 8.750|| 1.000 || 2000|| 120 || 1600|| 110 | ||
|} | |} | ||
As of 16 Nov, the latest firmware is 32V, included with Repetrel 2.828. | |||
Revision as of 18:07, 19 November 2015
EMO-Type heads are for printing as follows:
- With pastes, gels, emulsifiables or waxes.
- At room or elevated temperatures.
- With or without UV Crosslining.
- With Hyrel Nozzles (1.5mm, 2mm) or Luer Tips.
These include the following:
| Model | EMO-25 | COD-25 | VOL-25 | VCD-25 | KRA-15 | KCD-15 |
|---|---|---|---|---|---|---|
| Max Temp | Ambient | Ambient | 100°C | 100°C | 150°C | 150°C |
| UV Crosslinking | no | yes | no | yes | no | yes |
Settings for these heads (based on planetary gear ratios) are as follows; you will need to adjust these for the qualities of your print media:
| Gear Reduction |
Overrides | Prime | Unprime | |||
|---|---|---|---|---|---|---|
| Pulses | FR% | Steps | Dwell | Steps | Dwell | |
| 19:1 | 1.600 | 1.000 | 500 | 100 | 400 | 100 |
| 27:1 | 2.300 | 1.000 | 700 | 100 | 550 | 100 |
| 51:1 | 4.700 | 1.000 | 900 | 110 | 750 | 105 |
| 100:1 | 8.750 | 1.000 | 2000 | 120 | 1600 | 110 |
As of 16 Nov, the latest firmware is 32V, included with Repetrel 2.828.