Difference between revisions of "Materials"
Jump to navigation
Jump to search
| Line 6: | Line 6: | ||
The following is a list of materials with which the Hyrel machines can print; you can sort by any column. Please note that fans should be OFF for the first five layers, then on at the specified speed (see note below). | The following is a list of materials with which the Hyrel machines can print; you can sort by any column. Please note that fans should be OFF for the first five layers, then on at the specified speed (see note below). | ||
Note: we've had GREAT SUCCESS and are very impressed with the GeckoTek EZ-Stik build plates, and now recommend them for most thermoplastics (printing at under 350C; they stick TOO well to PEEK and Ultem): | |||
{| border="1" class="wikitable sortable" | {| border="1" class="wikitable sortable" | ||
| Line 14: | Line 16: | ||
! Fan %* | ! Fan %* | ||
! HotBed (°C) | ! HotBed (°C) | ||
! Surface | |||
! ESR,30M <br> mm/min | ! ESR,30M <br> mm/min | ||
! Hydra <br> mm/min | ! Hydra <br> mm/min | ||
|- | |- | ||
! [http://en.wikipedia.org/wiki/Acrylonitrile_butadiene_styrene ABS] | ! [http://en.wikipedia.org/wiki/Acrylonitrile_butadiene_styrene ABS] | ||
| [[MK1-250]] || 240/235 || 10 (25) || | | [[MK1-250]] || 240/235 || 10 (25) || 110 || [https://www.geckotek.co/collections/ez-stik-hot/products/ez-stik-hot-3d-printer-build-surface/ EZ-Stik Hot] || 2000 || 4000 | ||
|- | |- | ||
! [http://en.wikipedia.org/wiki/Polylactic_acid PLA] | ! [http://en.wikipedia.org/wiki/Polylactic_acid PLA] | ||
| [[MK1-250]] || 185/180 || 10 (25) || 40 || 2000 || 4000 | | [[MK1-250]] || 185/180 || 10 (25) || 40 || [https://www.geckotek.co/collections/ez-stik-hot/products/ez-stik-cold-3d-printer-build-surface EZ-Stik Cold] || 2000 || 4000 | ||
|- | |- | ||
! [http://www.plastink.com/en/product-category/rubber-o-175-mm-500-g/ PlastInk Rubber] | ! [http://www.plastink.com/en/product-category/rubber-o-175-mm-500-g/ PlastInk Rubber] | ||
| [[MK1-250]] || 225 || 10 (25) || 50 || 2000 || 4000 | | [[MK1-250]] || 225 || 10 (25) || 50 || [https://www.geckotek.co/collections/ez-stik-hot/products/ez-stik-cold-3d-printer-build-surface EZ-Stik Cold] || 2000 || 4000 | ||
|- | |- | ||
! [http://www.ninjaflex3d.com/products/ninjaflex-filaments/ NinjaFlex] | ! [http://www.ninjaflex3d.com/products/ninjaflex-filaments/ NinjaFlex] | ||
| [[MK1-250]] || 225 || 20 (51) || 40 || 500 || 500 | | [[MK1-250]] || 225 || 20 (51) || 40 || [https://www.geckotek.co/collections/ez-stik-hot/products/ez-stik-cold-3d-printer-build-surface EZ-Stik Cold] || 500 || 500 | ||
|- | |- | ||
! [http://en.wikipedia.org/wiki/Nylon Nylon] | ! [http://en.wikipedia.org/wiki/Nylon Nylon] | ||
| [[MK1-250]] || 225 || 10 (25) || 80 || 2000 || 4000 | | [[MK1-250]] || 225 || 10 (25) || 80 || [https://www.geckotek.co/collections/ez-stik-hot/products/ez-stik-hot-3d-printer-build-surface/ EZ-Stik Hot] || 2000 || 4000 | ||
|- | |- | ||
! [http://taulman3d.com/t-glase-features.html T-Glase] | ! [http://taulman3d.com/t-glase-features.html T-Glase] | ||
| [[MK1-250]] || 225 || 10 (25) || 80 || 2000 || 4000 | | [[MK1-250]] || 225 || 10 (25) || 80 || [https://www.geckotek.co/collections/ez-stik-hot/products/ez-stik-hot-3d-printer-build-surface/ EZ-Stik Hot] || 2000 || 4000 | ||
|- | |- | ||
! [http://www.orbi-tech.de/shop/3D-Filamente/BendLay:::72_121.html BendLay] | ! [http://www.orbi-tech.de/shop/3D-Filamente/BendLay:::72_121.html BendLay] | ||
| [[MK1-250]] || 225 || 10 (25) || 50 || 500 || 500 | | [[MK1-250]] || 225 || 10 (25) || 50 || [https://www.geckotek.co/collections/ez-stik-hot/products/ez-stik-cold-3d-printer-build-surface EZ-Stik Cold] || 500 || 500 | ||
|- | |- | ||
! [http://www.orbi-tech.de/shop/3D-Filaments/LayBrick:::72_75.html LayBrick] | ! [http://www.orbi-tech.de/shop/3D-Filaments/LayBrick:::72_75.html LayBrick] | ||
| [[MK1-250]] || 225 || 10 (25) || 80 || 500 || 500 | | [[MK1-250]] || 225 || 10 (25) || 80 || [https://www.geckotek.co/collections/ez-stik-hot/products/ez-stik-hot-3d-printer-build-surface/ EZ-Stik Hot] || 500 || 500 | ||
|- | |- | ||
! [http://www.orbi-tech.de/shop/3D-Filaments/LayWoo-d3:::72_76.html LayWoo-d3] | ! [http://www.orbi-tech.de/shop/3D-Filaments/LayWoo-d3:::72_76.html LayWoo-d3] | ||
| [[MK1-250]] || 220/205 || 10 (25) || 80 || 2000 || 4000 | | [[MK1-250]] || 220/205 || 10 (25) || 80 || [https://www.geckotek.co/collections/ez-stik-hot/products/ez-stik-hot-3d-printer-build-surface/ EZ-Stik Hot] || 2000 || 4000 | ||
|- | |- | ||
! [http://en.wikipedia.org/wiki/Polyethylene_terephthalate PET] | ! [http://en.wikipedia.org/wiki/Polyethylene_terephthalate PET] | ||
| [[MK1-250]] || 210 || 10 (25) || 40 || 500 || 500 | | [[MK1-250]] || 210 || 10 (25) || 40 || [https://www.geckotek.co/collections/ez-stik-hot/products/ez-stik-cold-3d-printer-build-surface EZ-Stik Cold] || 500 || 500 | ||
|- | |- | ||
! [http://en.wikipedia.org/wiki/Polyvinyl_alcohol PVA] | ! [http://en.wikipedia.org/wiki/Polyvinyl_alcohol PVA] | ||
| [[MK1-250]] || 210 || 10 (25) || 40 || 500 || 500 | | [[MK1-250]] || 210 || 10 (25) || 40 || [https://www.geckotek.co/collections/ez-stik-hot/products/ez-stik-cold-3d-printer-build-surface EZ-Stik Cold] || 500 || 500 | ||
|- | |- | ||
! [http://en.wikipedia.org/wiki/Clay Clay] | ! [http://en.wikipedia.org/wiki/Clay Clay] | ||
| [[EMO-25]] || - || - || - || 20 || 20 | | [[EMO-25]] || - || - || - || Ceramic Tile || 20 || 20 | ||
|- | |- | ||
! [http://en.wikipedia.org/wiki/Metal_clay Metal Clay], <br/> [http://en.wikipedia.org/wiki/Metal_clay#Precious_Metal_Clay_.28PMC.29 Precious Metal Clay] | ! [http://en.wikipedia.org/wiki/Metal_clay Metal Clay], <br/> [http://en.wikipedia.org/wiki/Metal_clay#Precious_Metal_Clay_.28PMC.29 Precious Metal Clay] | ||
| [[EMO-25]] || - || - || - || 20 || 20 | | [[EMO-25]] || - || - || - || Ceramic Tile || 20 || 20 | ||
|- | |- | ||
! [http://en.wikipedia.org/wiki/Polypropylene Polypropylene] | ! [http://en.wikipedia.org/wiki/Polypropylene Polypropylene] | ||
| Line 60: | Line 63: | ||
|- | |- | ||
! [http://en.wikipedia.org/wiki/Polycarbonate Polycarbonate] | ! [http://en.wikipedia.org/wiki/Polycarbonate Polycarbonate] | ||
| [[MK1-350]] || 350 || 10 (25) || 80 || 2000 || 4000 | | [[MK1-350]] || 350 || 10 (25) || 80 || [http://www.anycubic3d.com/products/show/1060.html Ultrabase] || 2000 || 4000 | ||
|- | |- | ||
! [http://en.wikipedia.org/wiki/Porcelain Porcelain] | ! [http://en.wikipedia.org/wiki/Porcelain Porcelain] | ||
| [[EMO-25]] || - || - || - || 20 || 20 | | [[EMO-25]] || - || - || - || Ceramic Tile || 20 || 20 | ||
|- | |- | ||
! [http://en.wikipedia.org/wiki/Plasticine Plasticine] | ! [http://en.wikipedia.org/wiki/Plasticine Plasticine] | ||
| [[EMO-25]] || - || - || - || 500 || 500 | | [[EMO-25]] || - || - || - || Glass || 500 || 500 | ||
|- | |- | ||
! [http://www.hasbro.com/playdoh/en_AU/ Play-Doh] | ! [http://www.hasbro.com/playdoh/en_AU/ Play-Doh] | ||
| [[EMO-25]] || - || - || - || 250 || 250 | | [[EMO-25]] || - || - || - || Glass || 250 || 250 | ||
|- | |- | ||
! [http://www.sculpey.com/ Sculpey] | ! [http://www.sculpey.com/ Sculpey] | ||
| Line 75: | Line 78: | ||
|- | |- | ||
! [https://sugru.com/ Sugru] | ! [https://sugru.com/ Sugru] | ||
| [[EMO-25]] || - || - || - || 250 || 250 | | [[EMO-25]] || - || - || - || Glass || 250 || 250 | ||
|- | |- | ||
! [http://en.wikipedia.org/wiki/RTV_silicone RTV Silicone] | ! [http://en.wikipedia.org/wiki/RTV_silicone RTV Silicone] | ||
| [[EMO-25]] ||| - || - || - || 250 || 250 | | [[EMO-25]] ||| - || - || - || Glass || 250 || 250 | ||
|- | |- | ||
! [http://www.dutchfilaments.com/flex-45-filament/ Flex45] | ! [http://www.dutchfilaments.com/flex-45-filament/ Flex45] | ||
| [[MK2-250]] ||| 215 || 20 (51) || 40 || 800 || 800 | | [[MK2-250]] ||| 215 || 20 (51) || 40 || [https://www.geckotek.co/collections/ez-stik-hot/products/ez-stik-cold-3d-printer-build-surface EZ-Stik Cold] || 800 || 800 | ||
|- | |- | ||
! [https://en.wikipedia.org/wiki/Polystyrene#Copolymers HIPS] | ! [https://en.wikipedia.org/wiki/Polystyrene#Copolymers HIPS] | ||
| [[MK1-250]] ||| 235 || 10 (25) || 50 || 2000 || 4000 | | [[MK1-250]] ||| 235 || 10 (25) || 50 || [https://www.geckotek.co/collections/ez-stik-hot/products/ez-stik-cold-3d-printer-build-surface EZ-Stik Cold] || 2000 || 4000 | ||
|- | |- | ||
! [https://orbi-tech.de/shop/3D-Filaments/Mold-Lay:::72_124.html Moldlay] | ! [https://orbi-tech.de/shop/3D-Filaments/Mold-Lay:::72_124.html Moldlay] | ||
| [[MK2-250]] ||| 175 || 10 (25) || n/a || 500 || 500 | | [[MK2-250]] ||| 175 || 10 (25) || n/a || || 500 || 500 | ||
|- | |- | ||
! [http://en.wikipedia.org/wiki/PETG PETG] | ! [http://en.wikipedia.org/wiki/PETG PETG] | ||
| [[MK1-250]] ||| 235 || 10 (25) || 80 || 2000 || 4000 | | [[MK1-250]] ||| 235 || 10 (25) || 80 || [https://www.geckotek.co/collections/ez-stik-hot/products/ez-stik-hot-3d-printer-build-surface/ EZ-Stik Hot] || 2000 || 4000 | ||
|- | |- | ||
! [https://en.wikipedia.org/wiki/Polyethylene_glycol PEG] | ! [https://en.wikipedia.org/wiki/Polyethylene_glycol PEG] | ||
| [[KRA-15]] ||| 65 || - || - || 2000 || 4000 | | [[KRA-15]] ||| 65 || - || - || || 2000 || 4000 | ||
|- | |- | ||
! [https://en.wikipedia.org/wiki/Polyether_ether_ketone PEEK] | ! [https://en.wikipedia.org/wiki/Polyether_ether_ketone PEEK] | ||
| [[MK1-450]] ||| 405 || 10 (25) || 200* || 2000 || 4000 | | [[MK1-450]] ||| 405 || 10 (25) || 200* || [http://www.anycubic3d.com/products/show/1060.html Ultrabase] || 2000 || 4000 | ||
|- | |- | ||
! [http://en.wikipedia.org/wiki/Wax Wax (molten)] | ! [http://en.wikipedia.org/wiki/Wax Wax (molten)] | ||
| [[KRA-15]] ||| varies || - || - || 1000 || 1000 | | [[KRA-15]] ||| varies || - || - || Glass || 1000 || 1000 | ||
|- | |- | ||
! [https://www.sculpteo.com/en/glossary/3d-printed-wax/ Wax (filament)] | ! [https://www.sculpteo.com/en/glossary/3d-printed-wax/ Wax (filament)] | ||
| [[MK1-250]] ||| varies || - || - || 2000 || 4000 | | [[MK1-250]] ||| varies || - || - || Glass || 2000 || 4000 | ||
|- | |- | ||
! [https://en.wikipedia.org/wiki/Polycaprolactone PCL] | ! [https://en.wikipedia.org/wiki/Polycaprolactone PCL] | ||
| [[KRA-15]] ||| 75 || - || - || 1000 || 1000 | | [[KRA-15]] ||| 75 || - || - || Glass || 1000 || 1000 | ||
|- | |- | ||
! [https://en.wikipedia.org/wiki/Polyphenylsulfone PPSU] | ! [https://en.wikipedia.org/wiki/Polyphenylsulfone PPSU] | ||
| [[MK1-450]] ||| 405 || varies || 130* || 2000 || 2000 | | [[MK1-450]] ||| 405 || varies || 130* || [http://www.anycubic3d.com/products/show/1060.html Ultrabase] || 2000 || 2000 | ||
|- | |- | ||
|} | |} | ||
Revision as of 14:21, 9 April 2019
A huge variety of materials can be printed with various extruders on the Hyrel machines. Below are the recipes we have so far...
Materials Printable on Hyrel Machines
The following is a list of materials with which the Hyrel machines can print; you can sort by any column. Please note that fans should be OFF for the first five layers, then on at the specified speed (see note below).
Note: we've had GREAT SUCCESS and are very impressed with the GeckoTek EZ-Stik build plates, and now recommend them for most thermoplastics (printing at under 350C; they stick TOO well to PEEK and Ultem):
| Material | Extruder | Head (°C) | Fan %* | HotBed (°C) | Surface | ESR,30M mm/min |
Hydra mm/min |
|---|---|---|---|---|---|---|---|
| ABS | MK1-250 | 240/235 | 10 (25) | 110 | EZ-Stik Hot | 2000 | 4000 |
| PLA | MK1-250 | 185/180 | 10 (25) | 40 | EZ-Stik Cold | 2000 | 4000 |
| PlastInk Rubber | MK1-250 | 225 | 10 (25) | 50 | EZ-Stik Cold | 2000 | 4000 |
| NinjaFlex | MK1-250 | 225 | 20 (51) | 40 | EZ-Stik Cold | 500 | 500 |
| Nylon | MK1-250 | 225 | 10 (25) | 80 | EZ-Stik Hot | 2000 | 4000 |
| T-Glase | MK1-250 | 225 | 10 (25) | 80 | EZ-Stik Hot | 2000 | 4000 |
| BendLay | MK1-250 | 225 | 10 (25) | 50 | EZ-Stik Cold | 500 | 500 |
| LayBrick | MK1-250 | 225 | 10 (25) | 80 | EZ-Stik Hot | 500 | 500 |
| LayWoo-d3 | MK1-250 | 220/205 | 10 (25) | 80 | EZ-Stik Hot | 2000 | 4000 |
| PET | MK1-250 | 210 | 10 (25) | 40 | EZ-Stik Cold | 500 | 500 |
| PVA | MK1-250 | 210 | 10 (25) | 40 | EZ-Stik Cold | 500 | 500 |
| Clay | EMO-25 | - | - | - | Ceramic Tile | 20 | 20 |
| Metal Clay, Precious Metal Clay |
EMO-25 | - | - | - | Ceramic Tile | 20 | 20 |
| Polypropylene | MK1-250 | 235 | 10 (25) | 80 | 2000 | 4000 | |
| Polycarbonate | MK1-350 | 350 | 10 (25) | 80 | Ultrabase | 2000 | 4000 |
| Porcelain | EMO-25 | - | - | - | Ceramic Tile | 20 | 20 |
| Plasticine | EMO-25 | - | - | - | Glass | 500 | 500 |
| Play-Doh | EMO-25 | - | - | - | Glass | 250 | 250 |
| Sculpey | EMO-25 | - | - | - | 250 | 250 | |
| Sugru | EMO-25 | - | - | - | Glass | 250 | 250 |
| RTV Silicone | EMO-25 | - | - | - | Glass | 250 | 250 |
| Flex45 | MK2-250 | 215 | 20 (51) | 40 | EZ-Stik Cold | 800 | 800 |
| HIPS | MK1-250 | 235 | 10 (25) | 50 | EZ-Stik Cold | 2000 | 4000 |
| Moldlay | MK2-250 | 175 | 10 (25) | n/a | 500 | 500 | |
| PETG | MK1-250 | 235 | 10 (25) | 80 | EZ-Stik Hot | 2000 | 4000 |
| PEG | KRA-15 | 65 | - | - | 2000 | 4000 | |
| PEEK | MK1-450 | 405 | 10 (25) | 200* | Ultrabase | 2000 | 4000 |
| Wax (molten) | KRA-15 | varies | - | - | Glass | 1000 | 1000 |
| Wax (filament) | MK1-250 | varies | - | - | Glass | 2000 | 4000 |
| PCL | KRA-15 | 75 | - | - | Glass | 1000 | 1000 |
| PPSU | MK1-450 | 405 | varies | 130* | Ultrabase | 2000 | 2000 |
- Note: Be sure the fan directs air to the material and not directly at the nozzle.
- Note: In Slic3r, you should slice with a fan value between 0 and 39, which will result in a fan speed between 0 and 99, since we have our fans run between 0 and 100, not between 0 and 255 like other printers. Also note that we leave the fan OFF for the first five layers.
- Note: PEEK is normally printed on Anycubic Ultrabase, or on an ABS base layer; PPSU is normally printed on a PC base layer.
Please note that there is a nice chart on the Simplify3D site that compares materials.