Difference between revisions of "Test"

From Hyrel3D
Jump to navigation Jump to search
(Created page with "{| class="wikitable" style="text-align: center;" ! style="width: 30%" | Settings: ! style="width: 30%" | MK1-250: ! style="width: 30%" | MK1-350/400: |- !colspan="3"| Materia...")
 
Line 1: Line 1:
{| class="wikitable" style="text-align: center;"
== Chart of Codes ==
! style="width: 30%" | Settings:
 
! style="width: 30%" | MK1-250:
 
! style="width: 30%" | MK1-350/400:
{| border="1" class="wikitable"
|-  
|+ G- and M- Code Reference Chart
!colspan="3"| Material
! Code
|-  
! Supported
! Type
! Brief Description
| (any)
|-
| (any)
! [[#G0_Rapid_Move|G0]]
|-  
| Yes || Rapid Move
! Color
|-
| (any)
! [[#G1_Working_Move|G1]]
| (any)
| Yes || Working Move
|-  
|-
! Nozzle
! [[#G2_Clockwise_Arc|G2]]
| 0.500
| Yes || Clockwise Arc
| 0.500
|-
|-  
! [[#G2.1_Spiral_CW_Arc1|G2.1]]
! Layer
| Yes || Spiral CW Arc<sup>1</sup>
| (any)
|-
| (any)
! [[#G2.2_Spiral_CW_Arc2|G2.2]]
|-  
| Yes || Spiral CW Arc<sup>2</sup>
!colspan="3"| Temp Info
|-
|-  
! [[#G2.3_3-Space_CW_Arc|G2.3]]
! Print Temp
| Yes || 3-Space CW Spiral Arc
| 240
|-
| 410
! [[#G3_Counterclockwise_Arc|G3]]
|-  
| Yes || Counterclockwise Arc
! Power Factor
|-
| 100
! [[#G3.1_Spiral_CCW_Arc1</sup>|G3.1]]
| 100
| Yes || Spiral CCW Arc<sup>1</sup>
|-  
|-
! Minimum
! [[#G3.2_Spiral_CCW_Arc2|G3.2]]
| (any)
| Yes || Spiral CCW Arc<sup>2</sup>
| (any)
|-
|-  
! [[#G3.3_3-Space_CCW_Arc|G3.3]]
! Maximum
| Yes || 3-Space CCW Spiral Arc
| (any)
|-
| (any)
! [[#G4_Timed_Pause|G4]]
|-  
| Yes || Timed Pause
!colspan="3"| Overrides
|-
|-  
! [[#G10_UNUSED|G10]]
! Pulses
| ''No'' || ''Absolute E''
| 0.78
|-
| 0.78
! [[#G11_UNUSED|G11]]
|-  
| ''No'' || ''Relative E''
! Feed Rate %
|-
| 1.000
! [[#G16_Arc_Plane:_Any|G16]]
| 1.000
| Yes || Arc in Any Plane
|-  
|-
!colspan="3"| Prime
! [[#G17_Arc_Plane:_XY|G17]]
|-  
| Yes || Arc in XY Plane
! Steps
|-
| 250
! [[#G18_Arc_Plane:_XZ|G18]]
| 250
| Yes || Arc in XZ Plane
|-  
|-
! Rate
! [[#G19_Arc_Plane:_YZ|G19]]
| 10,000
| Yes || Arc in YZ Plane
| 10,000
|-
|-  
! [[#G20_Set_Units_to_Inches|G20]]
! Dwell Time (ms)
| Yes || Set Units to Inches
| 50
|-
| 50
! [[#G21_Set_Units_to_Milimeters|G21]]
|-  
| Yes || Set Units to Milimeters
! Before Tool Change
|-
| 1
! [[#G28_Send_X,_Y_to_Physical_Home|G28]]
| 1
| Yes || Send X, Y to Physical Home
|-  
|-
!colspan="3"| Unprime
! [[#G53_Clear_Offsets|G53]]
|-  
| Yes || Clear Offsets
! Steps
|-
| 250
! [[#G54_-_G59_-_Set_Offsets|G54-59]]
| 250
| Yes || Set Offsets
|-  
|-
! Rate
! [[#G81_Peck_Drilling|G81]]
| 10,000
| G81 || Peck Drilling
| 10,000
|-
|-  
! [[#G90_Absolute_Positioning|G90]]
! Dwell Time (ms)
| Yes || Absolute Positioning
| 60
|-
| 60
! [[#G91_Relatative_Positioning|G91]]
|-  
| Yes || Relatative Positioning
! After Tool Change
|-
| 1
! [[#G92_Reset_Coordinate_Offsets|G92]]
| 1
| Yes || Reset Coordinates
|-  
|-
!colspan="3"| Offsets
! [[#G93_Clear_Coordinate_Offsets|G93]]
|-  
| Yes || Reset Coordinates
! Clone Head
|-
| Off
! [[#M0_Stop_Until_Resume|M0]]
| Off
| Yes || Stop Until Resume
|-  
|-
! X
! [[#M3_Turn_On_Spindle_.28CW.29|M3]]
| 0,000
| Yes || Spindle On CW
| 0,000
|-
|-  
! [[#M4_Turn_On_Spindle_.28CCW.29R|M4]]
! Y
| Yes || Spindle On CCW
| 0,000
|-
| 0,000
! [[#M5_Turn_Off_Spindle|M5]]
|-  
| Yes || Spindle Off
! Z
|-
| 0,000
! [[#M6_Declare_Head_Offsets|M6]]
| 0,000
| Yes || Declare Head Offsets
|-  
|-
!colspan="3"| Head Info
! [[#M7_Set_Power_On_Aux_1|M7]]
|-  
| Yes || Aux 1 On (Mist)
! Model
|-
| 250
! [[#M8_Set_Power_On_Aux_2|M8]]
| 250
| Yes || Aux 2 On (Flood)
|-  
|-
! RTD Type
! [[#M9_Turn_Off_All_Aux|M9]]
| 1 Meg
| Yes || All Aux Off
| 1 Meg
|-
|-  
! [[#M17_Engage_Motors|M17]]
! Motor Current
| Yes || Engage Motors
| High
|-
| High
! [[#M18_Disengage_Motors|M18]]
|-  
| Yes || Disengage Motors
! Step Mode
|-
| Sixteenth
! [[#M30_End_of_Program|M30]]
| Sixteenth
| Yes || End of Program
|-
! [[#M82_Absolute_E-Values|M82]]
| Yes || Absolute E-Values
|-
! [[#M83_Relative_E-Values|M83]]
| Yes || Relative E-Values
|-
! [[#M84_Disable_Motors|M84]]
| Yes || Disable Motors
|-
! [[#M104_Set_Temp_.28Head.29|M104]]
| Yes || Set Temp (Head)
|-
! [[#M106_Set_Cooling_.2F_Etc.|M106]]
| Yes || Set Cooling / Etc.
|-
! [[#M107_Stop_Cooling_.2F_Etc.|M107]]
| Yes || Stop Cooling / Etc.
|-
! [[#M109_Wait_for_Temp_.28Head.29|M109]]
| Yes || Wait for Temp (Head)
|-
! [[#M116_UNUSED|M116]]
| ''No'' || ''Pause for All Temps''
|-
! [[#M140_Set_Temp_.28Bed.29|M140]]
| Yes || Set Temp (Bed)
|-
! [[#M141_Set_Temp_.28Chamber.29|M141]]
| Yes || Set Temp (Chamber)
|-
! [[#M190_Wait_for_Temp_.28Bed.29|M190]]
| Yes || Wait for Temp (Bed)
|-
! [[#M191_Wait_for_Temp_.28Chamber.29|M191]]
| Yes || Wait for Temp (Chamber)
|-
! [[#M203_Set_G0_Speed|M203]]
| Yes || Set G0 Speed
|-
! [[#M221_Set_Flow_Rate|M221]]
| Yes || Set Flow Rate
|-
! [[#M229_Use_E_Values|M229]]
| Yes || Use E Values
|-
! [[#M253_Turn_On_Lathe_.28CW.29|M253]]
| Yes || Turn On Lathe (CW)
|-
! [[#M254_Turn_On_Lathe_.28CCW.29|M254]]
| Yes || Turn On Lathe (CCW)
|-
! [[#M255_Turn_Off_Lathe|M255]]
| Yes || Turn Off Lathe
|-
! [[#M619_Map_Aux_Port|M619]]
| Yes || Map Aux Port
|-
! [[#M620_Enable_Device|M620]]
| Yes || Enable Device
|-
! [[#M621_Set_Laser_Power|M621]]
| Yes || Set Laser Power
|-
! [[#M623_Duration_Emit|M623]]
| Yes || Duration Emit
|-
! [[#M660_Assign_Tool_Height_Offset|M660]]
| Yes || Set Tool Offsets
|-
! [[#M670_Enable_Y-arm_Light|M670]]
| Yes || Enable Y-arm Light
|-
! [[#M671_Activate_Danger_Lights|M671]]
| Yes || Activate Danger Light
|-
! [[#M672_Set_Y-arm_Light|M672]]
| Yes || Set Y-arm Light
|-
! [[#M675_Activate_Response_LEDs|M675]]
| Yes || Activate Response LEDs
|-
! [[#M676_Activate_Recirc._Fan|M676]]
| Yes || Activate Recirc. Fan
|-
! [[#M677_Activate_Buzzer|M677]]
| Yes || Activate Buzzer
|-
! [[#M678_Activate_Laser_X-hair|M678]]
| Yes || Activate Laser X-hair
|-
! [[#M679_Activate_Vacuum|M679]]
| Yes || Activate Vacuum
|-
! [[#M684_Activate_Exhaust|M684]]
| Yes || Activate Exhaust
|-
! [[#M685_Set_Power_on_Air|M685]]
| Yes || Activate Air
|-
! [[#M689_Activate_Ext._Head|M689]]
| Yes || Activate Ext. Head
|-
! [[#M701_Set_Head_Reporting|M701]]
| Yes || Set Head Reporting
|-
! [[#M702_-_M704_Cloning_Heads|M702]]
| Yes || Establish Clone Squad
|-
! [[#M702_-_M704_Cloning_Heads|M703]]
| Yes || Add to Clone Squad
|-
! [[#M702_-_M704_Cloning_Heads|M704]]
| Yes || Remove from Clone Squad
|-
! [[#M718_Stop_Logging_to_File|M718]]
| Yes || Stop Logging to File
|-
! [[#M719_Start_Logging_to_File|M719]]
| Yes || Start Logging to File
|-
! [[#M721_Set_Unprime_Values|M721]]
| Yes || Set Unprime Values
|-
! [[#M722_Set_Prime_Values|M722]]
| Yes || Set Prime Values
|-
! [[#M723_Set_Manual_Flow|M723]]
| Yes || Set Manual Flow
|-
! [[#M728_Set_Motor_Current_Boost|M728]]
| Yes || Set Motor Current Boost
|-
! [[#M756_Set_Height_for_Flow|M756]]
| Yes || Set Height for Flow
|-
! [[#M772_Reset_All_Metrics|M772]]
| Yes || Reset All Metrics
|-
! [[#M773_Generate_Basic_Report|M773]]
| Yes || Generate Basic Report
|-
! [[#M783_Tie_Aux_to_Extrusion|M783]]
| Yes || Tie Aux to Extrusion
|-
! [[#M790_New_Layer_Actions|M790]]
| Yes || New Layer Actions
|-
! [[#M791_Snap_Image|M791]]
| Yes || Snap Image
|-
! [[#M792_Execute_Action|M792]]
| Yes || Execute Action
|-
|}
|}
'''[[#What_is_GCode.3F|Back to top]]'''

Revision as of 20:02, 20 May 2020

Chart of Codes

G- and M- Code Reference Chart
Code Supported Brief Description
G0 Yes Rapid Move
G1 Yes Working Move
G2 Yes Clockwise Arc
G2.1 Yes Spiral CW Arc1
G2.2 Yes Spiral CW Arc2
G2.3 Yes 3-Space CW Spiral Arc
G3 Yes Counterclockwise Arc
[[#G3.1_Spiral_CCW_Arc1|G3.1]] Yes Spiral CCW Arc1
G3.2 Yes Spiral CCW Arc2
G3.3 Yes 3-Space CCW Spiral Arc
G4 Yes Timed Pause
G10 No Absolute E
G11 No Relative E
G16 Yes Arc in Any Plane
G17 Yes Arc in XY Plane
G18 Yes Arc in XZ Plane
G19 Yes Arc in YZ Plane
G20 Yes Set Units to Inches
G21 Yes Set Units to Milimeters
G28 Yes Send X, Y to Physical Home
G53 Yes Clear Offsets
G54-59 Yes Set Offsets
G81 G81 Peck Drilling
G90 Yes Absolute Positioning
G91 Yes Relatative Positioning
G92 Yes Reset Coordinates
G93 Yes Reset Coordinates
M0 Yes Stop Until Resume
M3 Yes Spindle On CW
M4 Yes Spindle On CCW
M5 Yes Spindle Off
M6 Yes Declare Head Offsets
M7 Yes Aux 1 On (Mist)
M8 Yes Aux 2 On (Flood)
M9 Yes All Aux Off
M17 Yes Engage Motors
M18 Yes Disengage Motors
M30 Yes End of Program
M82 Yes Absolute E-Values
M83 Yes Relative E-Values
M84 Yes Disable Motors
M104 Yes Set Temp (Head)
M106 Yes Set Cooling / Etc.
M107 Yes Stop Cooling / Etc.
M109 Yes Wait for Temp (Head)
M116 No Pause for All Temps
M140 Yes Set Temp (Bed)
M141 Yes Set Temp (Chamber)
M190 Yes Wait for Temp (Bed)
M191 Yes Wait for Temp (Chamber)
M203 Yes Set G0 Speed
M221 Yes Set Flow Rate
M229 Yes Use E Values
M253 Yes Turn On Lathe (CW)
M254 Yes Turn On Lathe (CCW)
M255 Yes Turn Off Lathe
M619 Yes Map Aux Port
M620 Yes Enable Device
M621 Yes Set Laser Power
M623 Yes Duration Emit
M660 Yes Set Tool Offsets
M670 Yes Enable Y-arm Light
M671 Yes Activate Danger Light
M672 Yes Set Y-arm Light
M675 Yes Activate Response LEDs
M676 Yes Activate Recirc. Fan
M677 Yes Activate Buzzer
M678 Yes Activate Laser X-hair
M679 Yes Activate Vacuum
M684 Yes Activate Exhaust
M685 Yes Activate Air
M689 Yes Activate Ext. Head
M701 Yes Set Head Reporting
M702 Yes Establish Clone Squad
M703 Yes Add to Clone Squad
M704 Yes Remove from Clone Squad
M718 Yes Stop Logging to File
M719 Yes Start Logging to File
M721 Yes Set Unprime Values
M722 Yes Set Prime Values
M723 Yes Set Manual Flow
M728 Yes Set Motor Current Boost
M756 Yes Set Height for Flow
M772 Yes Reset All Metrics
M773 Yes Generate Basic Report
M783 Yes Tie Aux to Extrusion
M790 Yes New Layer Actions
M791 Yes Snap Image
M792 Yes Execute Action

Back to top

Retrieved from "https://hyrel3d.in/wiki/index.php?title=Test&oldid=4564"