Difference between revisions of "Filaments"

From Hyrel3D
Jump to navigation Jump to search
(Created page with "Settings for the MK1-250: ; Material : '''ABS''' : '''(any)''' Color : '''0.500''' mm Nozzle : '''(any)''' Layer Z (will be overwritten with gcode value) ; Temp Info : '''240...")
 
(Redirected page to Filament Heads)
 
(14 intermediate revisions by the same user not shown)
Line 1: Line 1:
Settings for the MK1-250:
#REDIRECT [[Filament Heads]]
 
; Material
: '''ABS'''
: '''(any)''' Color
: '''0.500''' mm Nozzle
: '''(any)''' Layer Z (will be overwritten with gcode value)
; Temp Info
: '''240''' Print Temperature
: '''100''' Pwr Factor
: '''(any)''' Min
: '''(any)''' Max
; OverRides
: '''0.780''' Pulses
: '''1.000''' Feed Rate %
; Prime
: '''250''' Steps
: '''10,000''' Rate
: '''50''' ms Dwell Time
: '''1''' Prime After Tool Change
; Unprime
: '''250''' Steps
: '''10,000''' Rate
: '''60''' ms Dwell Time
: '''1''' Unprime Before Tool Change
; Offsets
: '''OFF''' Clone Head
: '''0.000''' X
: '''0.000''' Y
: '''0.000''' Z
; '''Head Info
: '''MK1''' Model
: '''1 Meg''' RTD Type
: '''High''' Motor Current
: '''Sixteenth''' Step Mode

Latest revision as of 13:35, 23 June 2020

Redirect to: