Difference between revisions of "Videos"

Revision as of 20:19, 10 December 2020

Table of Videos

Please also see the Instructions page and the Help page.

Remember, you can CTRL+F to search for a keyword on this page! You can also click on a column header to sort by that column.

The following chart compares and contrasts the various heads:

http://hyrel3d.net/wiki/index.php/Main_Page#Comparison

2020

Table of Video Links, 2020
Subject	Applicable Model(s)	Applicable Head(s)
The Hyrel Hydra Electrical Panel, Explained	16A	n/a
Making DXFs from Camera Images	All	Lasers
Viscotec Vipro HEAD-3 on Hyrel	All	Viscotec
Explaining the NEW RSD-30	All	Reservoirs
Making DXFs from CAD Models	All	Lasers
4th/5th Axis Installation and Setup	16A	All
3-Phase Spindle Tool Installation and Setup	16A	Spindles
Clench/Pinch Valve Installation and Setup	All	Reservoirs
Dynamic Mixing Head Installation and Setup	All	Reservoirs
EHR Electronics Access	EHR	n/a
ESR Unboxing and Setup	ESR	n/a
RSD-30 Refrigerated Syringe Dispenser	All	Reservoirs
Printing on PEI	All	Filaments
Printing Cememtitious Materials at TN Tech	All	Reservoirs
Tightening set screws for Hydra X-axis	16A	n/a
Interview on GA Mfg News	All	All
Hyrel V4 Install No. 9: Licensing	All	All
Hyrel V4 Install No. 8: Recipes	All	All
Hyrel V4 Install No. 7: Settings	All	All
Hyrel V4 Install No. 6`: Firmware	All	All
Hyrel V4 Install No. 5: Drivers	All	All
Hyrel V4 Install No. 4: Repetrel	All	All
Hyrel V4 Install No. 3: Adobe Reader	All	All
Hyrel V4 Install No. 2: Ecosystem Apps	All	All
Hyrel V4 Install No. 1: Winrar	All	All
Hydra 16AT - Tall	16A	All
Hyrel Bulk Feeder for Cementitious Materials	16A	Reservoirs
Using the new Precision Tool Setter on a Hyrel 3D Printer	16A	All

2019

Table of Video Links, 2020
Subject	Applicable Model(s)	Applicable Head(s)
RSD-30 - Refrigerated Syringe Dispenser	All	Reservoirs
Heated & Chilled Vacuum Bed	16A, EHR	Reservoirs
4th Axis Fun - Linear and Rotary Printing	16A	All
CO2 Laser - Installation Instructions	16A	Lasers
Dynamic Mixing Head DMH	All	Reservoirs
Configuring Prusa Slicer for Multi-Material Support	All	Filaments
Configuring the Prusa Slicer for Breakaway Support Material	All	Filaments
How to Load Filament into a Hyrel 3D Print Head	All	Filaments
Loading Print Heads into your Hyrel 3D Printer	All	All
How to Calibrate the Z-Zero Position	16A, 30M, ESR	All
Revised 2019: Hyrel 30M Initial Setup	30M	All
How to select a Build Surface	All	Filaments
How to Tram (level) the Hydra Bed	16A	All
Laser Marking on a Cylinder	All	Lasers
Five Axis Machining in Brass on a Hyrel Hydra	16A	Spindle
Configuring your Hydra for a 3-phase Spindle Tool	16A	Spindle
Five Axis Machining on a Hyrel Hydra	16A	Spindle this gcode was used
Dispensing RTV Silicone on a Hyrel Hydra	All	Reservoirs
Machining PTFE (Teflon) on a Hyrel Hydra	16A	Spindle
Rotating Head Prototype	16A	Filaments
Re-aligning the Gantry on the Hyrel Hydra 16A	16A	All

2018

Table of Video Links, 2018
Title	Link	Date	Model	Category	Details	Details	Details
Installing the new laser Power Supply in a Hyrel Hydra	https://www.youtube.com/watch?v=CbxB96oZFGE	2018.08.13	Hydra	Hardware	4th Axis	5th Axis	n/a
Hyrel Tapping Enabled	https://www.youtube.com/watch?v=krwOviaCZuw	2018.08.07	Hydra	Hardware	Spindle Tool	Tapping	n/a
Light Duty Milling with 3-Phase Spindle on a Hyrel Hydra	https://www.youtube.com/watch?v=QuIM9XSYMxE	2018.08.02	Hydra	Hardware	Spindle Tool	Milling	n/a
Improved UV Light Source for more Powerful Crosslinking	https://www.youtube.com/watch?v=ni56OFo1VvM	2018.07.20	Any	Hardware	EMO, SDS	n/a	n/a
How to install 4th and 5th Axes on a Hyrel Hydra	https://www.youtube.com/watch?v=68oktmbp8r0	2018.06.26	Hydra	Hardware	4th Axis	5th Axis	n/a
How to use an additional Yoke on a Hyrel Hydra	https://www.youtube.com/watch?v=7DcqbBzs-ZQ	2018.06.25	Hydra	Hardware	Yoke	n/a	n/a
How to install an additional Yoke on a Hyrel Hydra	https://www.youtube.com/watch?v=VerQRjS3iWE	2018.06.23	Hydra	Hardware	Yoke	n/a	n/a
The Filament Dryer	https://www.youtube.com/watch?v=jSTmzuuMYvc	2018.06.20	All	Hardware	Preheating	Filaments	n/a
Fourth and Fifth Axes Demo on a Hyrel Hydra	https://www.youtube.com/watch?v=lNURH2fRbY0	2018.04.19	Hydra	Hardware	4th Axis	5th Axis	n/a
Installing a fourth axis on a Hyrel Hydra	https://www.youtube.com/watch?v=_9R6OUMvb-o	2018.04.19	Hydra	Hardware	4th Axis	n/a	n/a
Machining hotbeds to under 0.001"	https://youtu.be/2QqwfsKgzuQ	2018.04.06	Hydra	Hardware	Hotbed	n/a	n/a
Setting the Z-Offset on the EHR	https://youtu.be/O1xmXCdj1xE	2018.03.21	EHR	Hardware	Z-Zero	n/a	n/a

2017

Table of Video Links, 2017
Title	Link	Date	Model	Category	Activity	Material Type	Other
CO2 Laser Marking with the Hydra	https://youtu.be/kqnjlTSg-20	2017.11.07	Hydra	Hardware	Laser	n/a	n/a
Converting a Hydra from Printer to Laser	https://youtu.be/FnYDoNkgOrI	2017.11.07	Hydra	Hardware	Laser	n/a	n/a
Cutting Nylon Mesh with CO2 Laser on a Hydra	https://youtu.be/fHqTlcdISIg	2017.11.07	Hydra	Hardware	Laser	n/a	n/a
Chamber Temperature in a Cold Room	https://youtu.be/nTejDT1B6uQ	2017.11.07	Hydra	Hardware	Heater	n/a	n/a
Cutting acrylic with the CO2 Laser	https://youtu.be/4Y9V6RWhKj4	2017.11.07	Hydra	Hardware	Application	Acrylic	n/a
Tiny Heated Chilled Bed Preview	https://youtu.be/dkMtzPDtIQY	2017.11.07	EHR, Hydra	Hardware	Application	Bioloicals	n/a
Fourth Axis Rotary Print	https://youtu.be/gdvyT8HoaOw	2017.10.20	Hydra	Hardware	Application	ABS	n/a
Additive Manufacturing of Toroid Inductor for Electronics Applications	https://youtu.be/3nKqwcXcEgY	2017.10.02	30M	Hardware	Application	Conductive, Magnetic	Paste
Hyrel Hydra X and Y Belt Tension Adjustments	https://www.youtube.com/watch?v=Az7V1FSRJfs	2017.08.17	Hydra	Hardware	Maintenance	n/a	n/a
Hyrel Hydra Linear Bearing Adjustments	https://www.youtube.com/watch?v=SyMB5063J5E	2017.08.16	Hydra	Hardware	Maintenance	n/a	n/a
Hyrel Hydra Z Belt Tension Adjustments	https://www.youtube.com/watch?v=zEsnegXhpLw	2017.08.16	Hydra	Hardware	Maintenance	n/a	n/a
Changing the Address Resistor on the CO2 Laser	https://www.youtube.com/watch?v=WNr59eCGuK4	2017.08.07	Hydra	hardware	Update	n/a	n/a
CO2 Laser Alignment	https://www.youtube.com/watch?v=qBBxkx40H8s	2017.07.27	Hydra	Hardware	Adjustment	n/a	n/a
Hydra Yoke Adjustment	https://www.youtube.com/watch?v=yiizFlScq9Q	2017.07.14	Hydra	Hardware	Adjustment	n/a	n/a
Hydra Yoke Angle Adjustment	https://www.youtube.com/watch?v=cbiCnP_YEbA	2017.07.13	Model	Hardware	Adjustment	n/a	n/a
Engnie, High Resolution (EHR) Setup, Part 2	https://www.youtube.com/watch?v=xMsXzGPHjng	2017.07.10	EHR	Hardware, Software	Instruction	n/a	n/a
Engnie, High Resolution (EHR) Setup, Part 1	https://www.youtube.com/watch?v=NbWgw9KY6Ic	2017.07.	EHR	Hardware, Software	Instruction	n/a	n/a
EHR Scaffold Instructions	https://www.youtube.com/watch?v=uC7acwIkKmQ	2017.06.26	EHR	Hardware	Operation	Non-Filament	Scaffold
EHR Scaffold Intro	https://www.youtube.com/watch?v=b1x2dvdYkTE	2017.06.26	EHR	Hardware	Instruction	Non-Filament	Scaffold
Unclogging a rare clogged MK1-250	https://www.youtube.com/watch?v=oisWKujfXAI	2017.06.22	MK1-250, MK2-250	Hardware	Maintenance	Filament	Clog
Unclogging a rare clogged MK1-450	https://www.youtube.com/watch?v=6FQJuhd2Lxo	2017.06.22	MK1-450	Hardware	Maintenance	Filament	Clog
Flashing Firmware on the Modified CO2 Laser Controller	https://www.youtube.com/watch?v=WrImt7_Pnxo	2017.06.21	CO2 Laser	Firmware	Upgrade	Laser	n/a
The Hyrel Hydra Family	https://www.youtube.com/watch?v=1J5bqvcV3Rs	3017.06.06	Hydra	Hardware	Demonstration	All	n/a
High Resolution Engine Vacuum Bed	https://www.youtube.com/watch?v=CF7eRdFuZYQ	2017.05.22	EHR	Hardware	Demonstration	Any	Vacuum Bed
High Resolution Engine Setup	https://www.youtube.com/watch?v=eltjeQ6KerM	2017.05.09	EHR	Hardware	Instructions	Any	n/a
SDS Clench Valve Assembly Instructions	https://www.youtube.com/watch?v=SvX4gKqAQDI	2017.05.19	SDS	Hardware	Instructions	Non-Filament	n/a
How to Load the SDS Clench Valve	https://www.youtube.com/watch?v=Mz5J8jsb6D4	2017.05.16	SDS (all EMO-type)	Hardware	Installation	Non-Filament	n/a
EHR Accuracy Test	https://www.youtube.com/watch?v=JwKq8_tahYA	2017.05.16	EHR	Hardware	Demonstration	All	n/a
Hydra 16A Controls Overview	https://www.youtube.com/watch?v=Udbu_Zuh8k0	2017.05.08	Hydra 16AS, 16AT Hardware	Overview	All	n/a
Using Low Temperature Solder Paste to connect a Flat Flex Cable	https://www.youtube.com/watch?v=cClPqIJwhLs	2017.04.17	n/a	Hardware	Demonstration	Solder Paste	n/a
Draining Laser Coolant on the Hyrel Hydra	https://www.youtube.com/watch?v=GCzPw4FOG8c	2017.04.13	Hydra 640, 645	Hardware	Maintenance	Laser	n/a
Hydra Home Calibration Details	https://www.youtube.com/watch?v=pPtGSwyS140	2017.04.07	Hydra (All)	Firmware	Settings	n/a	n/a
Replacing the top component on an STS Head Assembly	https://www.youtube.com/watch?v=LLIWqTRBhTo	2017.04.05	SDS	Hardware	Maintenance	Non-filament	n/a
HYDRA Hot Bed Installation	https://www.youtube.com/watch?v=qxbtI034omk	2017.03.22	Hydra (All)	Hardware	Installation	All	n/a
Hydra Model Startup	https://www.youtube.com/watch?v=fuLCsqfAX3E	2017.03.22	Hydra (All)	Hardware	Startup	All	n/a
Unboxing the Hydra Floor Model Units	https://www.youtube.com/watch?v=LhnV9H7LV9g	2017.03.19	Hydra (All)	Hardware	Startup	All	n/a
Hydra Overview by CTO Karl Gifford	https://www.youtube.com/watch?v=ULpn18OqD-U	2017.03.09	Hydra (All	Hardware	Overview	All	n/a
How to Manage the Pick-and-Place with Repetrel Software	https://www.youtube.com/watch?v=QEfskyU7LJ4	2017.03.02	PNP	Hardware	Setup	PNP	n/a
Hyrel Hydra Versitility	https://www.youtube.com/watch?v=Jz3onGdmW1c	2017.02.08	Hydra (All)	Hardware	Introduction	All	n/a
Hydra Vinyl Cutter Overview	https://www.youtube.com/watch?v=pKkrd4R_54Y	2017.02.16	Hydra (All)	Hardware	Demonstration	Vinyl	n/a
Hyrel 3D Hydra Pick-and-Place Introduction	https://www.youtube.com/watch?v=haKWeCbXkMI	2017.02.10	Hydra (All)	Hardware	Introduction	Pick-And-Place	n/a
The Hyrel3D Hydra Line	https://www.youtube.com/watch?v=uACoqtNbXE0	2017.01.26	Hydra	Hardware	Introduction	All	n/a
Tramming the bed on the 16A	https://www.youtube.com/watch?v=KAoSS-Z-aeY	2017.01.19	Hydra (All)	Hardware	Maintenance	n/a	n/a
The Benefits of Microscope Inspection During Printing	https://www.youtube.com/watch?v=tibkVZB_n9c	2017.01.06	All	Hardware	Instruction	All	n/a
Printing PLGA for internal Biological Applications	https://www.youtube.com/watch?v=aR4d-2BZj_Y	2017.01.02	All	Hardware	Maintenance	Emulsion	n/a

2016

Table of Video Links, 2016
Title	Link	Date	Model	Category	Details	Details	Details
Varialble Width Conductive Paste Extrusion	https://www.youtube.com/watch?v=z4IGQ5JMP6g	2016.12.30	All	Hardware	Introduction	Emulsion	n/a
Microscope Print View Setup	https://www.youtube.com/watch?v=2f5FEhVsqy8	2016.12.30	All	Hardware	Maintenance	All	n/a
Replacing the LED Strip	https://www.youtube.com/watch?v=D2sWEYRVAII	2016.12.23	System 30M	Hardware	Maintenance	LEDs	n/a
Replacing the Front Switch Panel	https://www.youtube.com/watch?v=14ynZ3DHzVg	2016.12.23	System 30M	Hardware	Maintenance	Switch Panel	n/a
Static Mixing Head Explained - v2 Including SDS Heads	https://www.youtube.com/watch?v=DQj6oLfrbLo	2016.12.20	All	Hardware	Introduction	Emulsion	n/a
Hot Bed Manufacturing	https://www.youtube.com/watch?v=_vJXnB-8JII	2016.12.16	Hydra	Hardware	Instruction	All	HotBed
Static Mixing Head Explained	https://www.youtube.com/watch?v=3azICOBuHdk	2016.12.15	MODEL	Hardware	Instruction	Emulsion	Static Mixing
Timelapse Recording	https://www.youtube.com/watch?v=6qJ-2uFt-_Y	2016.12.06	All	Software	Instruction	n/a	n/a
HotHead LEDs Explained	https://www.youtube.com/watch?v=ROpcvqS_r8s	2016.12.06	All	Hardware	Instruction	All	LEDs
LA6-450 and LA5-808 Laser Overview	https://www.youtube.com/watch?v=Tz6mRSkOaSk	2016.12.02	LA5-808, LA6-450	Hardware	Instruction	Laser	n/a
SDS and CSD Overview	https://www.youtube.com/watch?v=h95IurET7UM	2016.11.29	SDS, CSD	Hardware	Instruction	Emulsion	n/a
Quiet Storm Cooling Fan Overview	https://www.youtube.com/watch?v=4B9hoMLNOuQ	2016.11.28	QS	Hardware	Overview	Filament	n/a
VOL-25 and VCD-25 Overview	https://www.youtube.com/watch?v=9_onCKhT_dg	2016.11.28	VOL-25, VCD-25	Hardware	Overview	Emulsion	n/a
KRA-15 and KCD-15 Overview	https://www.youtube.com/watch?v=QD2FrZ4kg1g	2016.11.28	KRA-15, KCD-15	Hardware	Overview	Emulsion	n/a
Hydra 640 (16A) Two Part Test Print	https://www.youtube.com/watch?v=Rc2UFwjUtc4	2016.11.23	Hydra (All)	Hardware	Demonstration	Filament	n/a
Extrusion Prototype Print	https://www.youtube.com/watch?v=Ql1NZLWVJQM	2016.11.23	Hydra 640	Hardware	Demonstration	Filament	n/a
EMO-25 and COD-25 Overview	https://www.youtube.com/watch?v=ktK256u0sN8	2016.11.17	EMO-25, COD-25	Hardware	Overview	Emulsion	n/a
Session 3C Slicing for Multiple Head Support	https://www.youtube.com/watch?v=Vn8jnvwh5to	2016.11.15	Any	Software	Slicing	Any	n/a
Session 3A - Setting Two Heads to Z-Zero	https://www.youtube.com/watch?v=p1Ihd4ETxhg	2016.11.14	All	Software	Instruction	All	n/a
Session 3B - Calibrating the Offset Between Two Heads	https://www.youtube.com/watch?v=FCuSvQm6ej4	2016.11.14	All	Software	Instruction	All	n/a
Session 2D - Editing Slic3r Recipes	https://www.youtube.com/watch?v=dkQpsJWRI4Y	2016.11.109	All	Software	Instruction	All	n/a
Session 2E - Slicing your STL and Viewing your GCODE	https://www.youtube.com/watch?v=kJc9sNlV0fA	2016.11.09	All	Software	Instruction	All	n/a
Session 2C - Positioning, Scaling, and Rotating your STL	https://www.youtube.com/watch?v=IQbgGwiGVZA	2016.	All	Software	Instruction	All	n/a
Session 1A - Hardware and Software Overview	https://www.youtube.com/watch?v=mVyCq7CPGLg	2016.11.03	All	Software	Instruction	All	n/a
Session 1B - Communications and Bed Leveling	https://www.youtube.com/watch?v=2tIHw_JIQAI	2016.11.02	All	Software	Instruction	All	n/a
Session 1C - Printing with Plasticine	https://www.youtube.com/watch?v=lFATCfKJf4I	2016.11.02	All	Software	Instruction	All	n/a
Session 2A: Simple CAD Modeling in FreeCAD	https://www.youtube.com/watch?v=2yHRuef29L4	2016.08.24	All	Software	Instruction	All	n/a
Session 2B - Healing an STL in MeshLab	https://www.youtube.com/watch?v=eLGIRAgLz4w	2016.08.17	All	Software	Instruction	All	n/a
PC to Printer Connectivity	https://www.youtube.com/watch?v=RlJqdhtpB6Q	2016.11.01	All	Software	Instruction	All	n/a
Using the Spindle Tool to rework Circuit Boards	https://www.youtube.com/watch?v=C88ni0huwhw	2016.10.27	All	Hardware	Instruction	Spindle Tool	n/a
Running a FADAL CNC on Hyrel3D Circuitry, Firmware and Software	https://www.youtube.com/watch?v=KIGeQmXNbNE	2016.10.17	All	All	Demonstration	n/a	n/a
Table Arm (X-Arm) Block Adjustment	https://www.youtube.com/watch?v=ImMo3V1D70w	2016.10.14	Non-Hydras	Hardware	Maintenance	All	n/a
MK1-250 Overview	https://www.youtube.com/watch?v=yaCYFmoIESk	2016.10.14	All	Hardware	Instruction	MK1-250	n/a
MK1-450 Overview	https://www.youtube.com/watch?v=UvZMecXsHEM	2016.10.14	All	Hardware	Instruction	MK1-450	n/a
MK2-250 Overview	https://www.youtube.com/watch?v=SOGKeU3vLbs	2016.10.14	All	Hardware	Instruction	MK2-250	n/a
Replacing the 30M/ESR Heated Build Platform	https://www.youtube.com/watch?v=FkJT3ILlAHw	2016.10.03	All	Hardware	Instruction	HotBed	n/a
Multi Head Printing - Nested STLs	https://www.youtube.com/watch?v=3KwJ6OgOx14	2016.09.22	All	Software	Instruction	All	n/a
X-Axis Belt Tightening	https://www.youtube.com/watch?v=4GYWfMrs0F8	2016.09.22	S30, ESR	Hardware	Maintenance	All	n/a
Y-Axis Belt Tightening	https://www.youtube.com/watch?v=IkgviAGep-c	2016.09.21	S30, ESR	Hardware	Maintenance	All	n/a
Plasma Magnetic Vortex Deposition (ElectroSpinning)	https://www.youtube.com/watch?v=lQy25Nlj3_Q	2016.09.21	Any	Hardware	Demonstration	EMO-HV	n/a
3D Milling on the Hydra Series	https://www.youtube.com/watch?v=LQb5vS97jFo	2016.09.02	Hydra	Hardware	Demonstration	ST1 Spindle Tool	n/a
Introducing the Hydra 640 (formerly Model 16A)	https://www.youtube.com/watch?v=81sVBZOOcbw	2016.08.05	Hydra	Hardware	Introduction	Any	n/a
USBB Jumper Instructions	https://www.youtube.com/watch?v=uPqr4S0WC3Q	2016.07.19	S30M, ESR, EHR	Hardware	Instruction	Any	n/a
Size Does Matter	https://www.youtube.com/watch?v=Rw2E_d-q9bQ	2016.07.11	Hydra Series	Hardware	Introduction	Any	n/a
Print Heads Overview	https://www.youtube.com/watch?v=xGriCCrfkuw	2016.006.16	Any	Hardware	Overview	Print Heads	n/a
Session 2F - Loading and Printing with Filaments, MK-Series Heads	https://www.youtube.com/watch?v=QMyuKdgiWI4	2016.06.03	Any	Hardware	Instruction	MK Series	n/a
MK1-250 PEEK Nozzle Assembly	https://www.youtube.com/watch?v=ysO8oAzFwC4	2016.05.02	Any	Hardware	Instruction	MK1-250, MK2-250	n/a
New Hydra Printer Line Intro	https://www.youtube.com/watch?v=BoHRC9m5nlQ	2016.03.28	Hydra	Hardware	Introduction	Any	n/a
Bioplotting for under $10K	https://www.youtube.com/watch?v=XREWb_Md5o0	2016.02.17	Any	Hardware	Introduction	SDS Series	n/a
Programming Head Offsets	https://www.youtube.com/watch?v=9zxxBYbdlOE	2016.02.17	All	Software	Instruction	Any	n/a
Slicing for a Two-Material Print	https://www.youtube.com/watch?v=nfIvS50zLyc	2016.02.17	Any	Software	Instruction	Any	n/a
Loading Filament and Printing with the Hyrel3D MK2-250	https://www.youtube.com/watch?v=0dS3bC0BnRQ	2016.02.09	Any	Hardware	Instruction	MK2-250	n/a
Loading Filament and Printing with the Hyrel3D MK1-250	https://www.youtube.com/watch?v=v2ifSlZ0qEw	2016.02.08	Any	Hardware	Instruction	MK1-250	n/a
Loading and Printing with the EMO-25 Print Head	https://www.youtube.com/watch?v=q-DbAbNMW48	2016.02.04	Any	Hardware	Instruction	EMO-25	n/a
SDS RTV Instructions, v2	https://www.youtube.com/watch?v=ej55bZXrltA	2016.02.04	Any	Hardware	Instruction	SDS Series	RTV
Intro to Hyrel Possibilities - Jan 2016	https://www.youtube.com/watch?v=MwrhV74NjCQ	2016.01.25	All	Hardware	Overview	All	n/a
MK2-250 Dual Drive for Flexible Filaments	https://www.youtube.com/watch?v=V_zCytnGvvo	2016.01.20	Any	Hardware	Introduction	MK2-250	n/a
6w, 450nm Laser Test	https://www.youtube.com/watch?v=O1IGa-8y9yQ	2016.01.14	Any	Hardware	Demonstration	LA6-450	n/a
SDS RTV Instructions, v1	https://www.youtube.com/watch?v=0JJp7HeK35M	2016.01.14	Any	Hardware	Instructions	SDS Series	n/a
Introducing the SDS Print Heads	https://www.youtube.com/watch?v=XKHa1CXnSdI	2016.01.08	Any	Hardware	Introduction	SDS Series	n/a
Sneak Peek: Pick and Place Prototype	https://www.youtube.com/watch?v=BlSGlOpyipI	2016.01.05	Hydra	Hardware	Introduction	PNP Pick and Place	n/a

2012-2015

Table of Video Links, 2012-2015
Title	Link	Date	Model	Category	Activity	Material Type	Other
LA6-450: 6w, 450nm Diode Laser Head	https://www.youtube.com/watch?v=OceUiuTixPA	2015.12.22	Any	Hardware	Introduction	LA6-450	n/a
3D Printing RTV Silicone	https://www.youtube.com/watch?v=vmw0LS_f9V0	2015.12.18	Any	Hardware	Demonstration	SDS-Series	n/a
Loading the VCD-25	https://www.youtube.com/watch?v=YWe3TQGgNW0	2015.12.09	Any	Hardware	Instruction	VCD-25	n/a
Short Porcelain Print Demo	https://www.youtube.com/watch?v=huJuexTLbYA	2015.12.08	Any	Hardware	Demonstration	EMO-25	n/a
Replacing the Tablet Interface Board	https://www.youtube.com/watch?v=b583I7AlGJI	2015.11.25	System 30M, EHR	Hardware	Instruction	n/a	n/a
2016 Design Contest Video	https://www.youtube.com/watch?v=ZKAzXoJ0q8Y	2015.11.17	System 30M	Hardware	Contest	All	n/a
DXF to Laser Gcode Generation	https://www.youtube.com/watch?v=YRsyEGHyt3k	2015.10.20	Any	Software	Instruction	Laser, Spindle Tool	n/a
Printing PEEK (PolyEther Ether Ketone) and PC (PolyCarbonate)	https://www.youtube.com/watch?v=Om9cjxMXuxY	2015.09.29	Any	Hardware	Demonstration	MK1-450	n/a
Healing with MeshLab	https://www.youtube.com/watch?v=IreaoCfQ8mE	2015.09.01	Any	Software	Instruction	Any	n/a
Postprocessing with a Heat Gun	https://www.youtube.com/watch?v=0Aj9WCabPgw	2015.08.17	Any	Hardware	Instruction	Any	n/a
Introduction to Hyrel 3D Possibilities, 2015	https://www.youtube.com/watch?v=4oxCqR_DVNQ	2015.08.11	All	Hardware	Introduction	All	n/a
Updating to Repetrel 2 4xx	https://www.youtube.com/watch?v=n4QwiuQtjO0	2015.08.06	All	Software	Instruction	n/a	n/a
Updating your 407 Motion Controller	https://www.youtube.com/watch?v=cFAFRkpLmww	2015.07.24	All	Software	Instruction	n/a	n/a
Replacing the HOTHEAD controller	https://www.youtube.com/watch?v=XKCEkKSolZc	2015.07.23	All	Hardware	Instruction	n/a	n/a
Programming the HOTBED controller on the System 30M and ESR	https://www.youtube.com/watch?v=yM8QMZBTb4o	2015.07.22	All	Software	Instruction	n/a	n/a
Printing with Cloning - three heads in Parallel	https://www.youtube.com/watch?v=cuRcIE-Jbyc	2015.07.21	All	Software	Instruction	n/a	n/a
Older Instructions, Slicing for Multiple Head Support	https://www.youtube.com/watch?v=VMyS3h4qiSA	2015.07.17	All	Software	Slicing	Any	n/a
Leveling the X-Arm on System 30M, Engine SR	https://www.youtube.com/watch?v=0gFX6Mh-ths	2015.06.02	System 30M, Engine SR	Hardware	Instruction	n/a	n/a
Correcting Y-Arm Flexation Fix on the System 30M, Engine SR	https://www.youtube.com/watch?v=LZd0ecogGlQ	2015.03.18	System 30M, Engine SR	Hardware	Instruction	n/a	n/a
Manually Setting the Z-Zero Position	https://www.youtube.com/watch?v=ArDX4UpflmE	2015.03.09	System 30M, Engine SR	Hardware	Instruction	n/a	n/a
Picking Right 3D Printer For You	https://www.youtube.com/watch?v=vc9gBZtUL7c	2015.02.08	All	Hardware	Overview	All	n/a
Changing the Main I/O Board, System 30M, ESR	https://www.youtube.com/watch?v=66S9XJ-KeU8	2015.02.12	All	Hardware	Overview	All	Spine
Laser Test Print	https://www.youtube.com/watch?v=yEePz8_0ttc	2015.02.17	All	Hardware	Demonstration	LA5-808 Diode Laser	n/a
EMO Series Printing Tips	https://www.youtube.com/watch?v=tLHpaePTP-k	2015.02.10	All	Hardware	Instruction	EMO Series (EMO, COD, VOL, VCD, KRA, KCD, KR2, KC2)	n/a
Changing Power Supplies in the 30M and ESR	https://www.youtube.com/watch?v=Zl1sqy6PWx8	2015.02.04	30M, ESR	Hardware	Instruction	Any	n/a
Multi-Head Calibration Guide	https://www.youtube.com/watch?v=IQscrgv6uaQ	2015.02.03	Any	Hardware/Software	Instruction	Any	n/a
LA5-808 "Shark V" Diode Laser	https://www.youtube.com/watch?v=0lpa4nENtyQ	2015.01.14	Any	Hardware	Introduction	LA5-808	n/a
Luer Tip Kit for EMO and SDS Series Print Heads	https://www.youtube.com/watch?v=mPYPWjnDGho	2014.12.23	Any	Hardware	Introduction	LTK	n/a
Print Head SDK	https://www.youtube.com/watch?v=-VHxf182fIs	2014.12.09	All	Hardware, Software	Introduction	SDK	n/a
MK Series Printing Tips	https://www.youtube.com/watch?v=Fg9omXlYR-Q	2014.11.12	All	Procedure	Instruction	MK Series	n/a
Replacing fuses (old) on the Yoke	https://www.youtube.com/watch?v=EosKDe-SyUI	2014.08.27	ALL	Hardware	Instruction	All	n/a
Loading the EMO-type Reservoirs	https://www.youtube.com/watch?v=4yuzpUqeE-Y	2014.04.23	ALL	Hardware	Instruction	EMO, COD, VOL, VCD, KRA, KCD, KR2, KC2	n/a
Changing the Economics of 3D Printing	https://www.youtube.com/watch?v=xQFacnpzmv0	2013.12.24	All	Hardware	Demonstration	n/a	n/a
System 30M Product Release	https://www.youtube.com/watch?v=c9HvQ3SepoM	2013.10.29	System 30M	Hardware, Software	Introduction	n/a	n/a
Simultaneous 3D Printing of Multiple Parts	https://www.youtube.com/watch?v=P6aMBQSZPgg	2013.07.02	All	Hardware, Software	Demonstration	MK1-250	n/a
3D Printing with Sugru The Amazing Self-Setting Rubber	https://www.youtube.com/watch?v=nuii5rP53Js	2013.06.19	Any	Hardware	Demonstration	EMO-25	n/a
3D Printing with Play-Doh	https://www.youtube.com/watch?v=dihvAQR7LQg	2013.06.04	All	Hardware	Demonstration	EMO-25	n/a
3D Printing with Plasticine	https://www.youtube.com/watch?v=cw8XiW46G0k	2013.04.13	Any	Hardware	Demonstration	EMO-25	n/a
3D Printing with Air-Dry Modeling Clay	https://www.youtube.com/watch?v=trdz4YDbdsw	2013.04.06	Any	Hardware	Demonstration	EMO-25	n/a
Interchangeable Hot-Swappable Heads	https://www.youtube.com/watch?v=XNwv7Dw_Zwg	2013.05.12	Any	Hardware, Software	Demonstration	MK1-250	n/a
Thank you, Kickstarters!	https://www.youtube.com/watch?v=mu9xMmkZFns	2012.11.05	All	Hardware, Software	Thank You	n/a	n/a
Quick Tour of our Main Shop!	https://www.youtube.com/watch?v=Z9rgkw5r4l4	2012.10.17	All	Introduction	Thank You	n/a	n/a

@@ Line 176: / Line 176: @@
 ! [[File:S3qw8dAWeNo.png|200px| link=https://www.youtube.com/watch?v=S3qw8dAWeNo]]
 | RSD-30 - Refrigerated Syringe Dispenser
-| asdf
+| All
-| asdf
+| Reservoirs
 |-
 ! [[File:RAkjF9nLy4M.png|200px| link=https://www.youtube.com/watch?v=rAkjF9nLy4M]]
 | Heated & Chilled Vacuum Bed
-| asdf
+| 16A, EHR
-| asdf
+| Reservoirs
 |-
 ! [[File:Gl3mbw88fmo.png|200px| link=https://www.youtube.com/watch?v=Gl3mbw88fmo]]
 | 4th Axis Fun - Linear and Rotary Printing
-| asdf
+| 16A
-| asdf
+| All
 |-
 ! [[File:VVhH8hc3olc.png|200px| link=https://www.youtube.com/watch?v=vVhH8hc3olc]]
 | CO2 Laser - Installation Instructions
-| asdf
+| 16A
-| asdf
+| Lasers
 |-
 ! [[File:SVC5W_DdQ9E.png|200px| link=https://www.youtube.com/watch?v=sVC5W_DdQ9E]]
 | Dynamic Mixing Head DMH
-| asdf
+| All
-| asdf
+| Reservoirs
 |-
 ! [[File:4oqPbfdD8O0.png|200px| link=https://www.youtube.com/watch?v=4oqPbfdD8O0]]
 | Configuring Prusa Slicer for Multi-Material Support
-| asdf
+| All
-| asdf
+| Filaments
 |-
 ! [[File:DDwGcDgOOQs.png|200px| link=https://www.youtube.com/watch?v=DDwGcDgOOQs]]
 | Configuring the Prusa Slicer for Breakaway Support Material
-| asdf
+| All
-| asdf
+| Filaments
 |-
 ! [[File:CW77WBv3x0Q.png|200px| link=https://www.youtube.com/watch?v=cW77WBv3x0Q]]
 | How to Load Filament into a Hyrel 3D Print Head
-| asdf
+| All
-| asdf
+| Filaments
 |-
 ! [[File:EMfkmXFuPd0.png|200px| link=https://www.youtube.com/watch?v=EMfkmXFuPd0]]
 | Loading Print Heads into your Hyrel 3D Printer
-| asdf
+| All
-| asdf
+| All
 |-
 ! [[File:XC1zLqYkKsc.png|200px| link=https://www.youtube.com/watch?v=xC1zLqYkKsc]]
 | How to Calibrate the Z-Zero Position
-| asdf
+| 16A, 30M, ESR
-| asdf
+| All
 |-
 ! [[File:0Apq3tlila8.png|200px| link=https://www.youtube.com/watch?v=0Apq3tlila8]]
 | Revised 2019: Hyrel 30M Initial Setup
-| asdf
+| 30M
-| asdf
+| All
 |-
 ! [[File:0MFtqhM6ZKM.png|200px| link=https://www.youtube.com/watch?v=0MFtqhM6ZKM]]
 | How to select a Build Surface
-| asdf
+| All
-| asdf
+| Filaments
 |-
 ! [[File:-4LuhNfbMAo.png|200px| link=https://www.youtube.com/watch?v=-4LuhNfbMAo]]
 | How to Tram (level) the Hydra Bed
-| asdf
+| 16A
-| asdf
+| All
 |-
 ! [[File:C5-NYk06NVc.png|200px| link=https://www.youtube.com/watch?v=C5-NYk06NVc]]
 | Laser Marking on a Cylinder
-| asdf
+| All
-| asdf
+| Lasers
 |-
 ! [[File:PjqDXXPjI4w.png|200px| link=https://www.youtube.com/watch?v=PjqDXXPjI4w]]
 | Five Axis Machining in Brass on a Hyrel Hydra
-| asdf
+| 16A
-| asdf
+| Spindle
 |-
 ! [[File:KmkGR7u5D58.png|200px | link=https://www.youtube.com/watch?v=kmkGR7u5D58]]
 | Configuring your Hydra for a 3-phase Spindle Tool
-| asdf
+| 16A
-| asdf
+| Spindle
 |-
 ! [[File:B0lvN-aPYHI.png|200px| link=https://www.youtube.com/watch?v=B0lvN-aPYHI]]
 | Five Axis Machining on a Hyrel Hydra
-| asdf
+| 16A
-| asdf [http://hyrel3d.net/downloads/gcode/Ardes_tube_cap_milling.gcode this gcode]
+| Spindle <br> [http://hyrel3d.net/downloads/gcode/Ardes_tube_cap_milling.gcode this gcode was used]
 |-
 ! [[File:CmBaHHAfbEo.png|200px| link=https://www.youtube.com/watch?v=CmBaHHAfbEo]]
 | Dispensing RTV Silicone on a Hyrel Hydra
-| asdf
+| All
-| asdf
+| Reservoirs
 |-
 ! [[File:G526vFi8yWI.png|200px| link=https://www.youtube.com/watch?v=G526vFi8yWI]]
 | Machining PTFE (Teflon) on a Hyrel Hydra
-| asdf
+| 16A
-| asdf
+| Spindle
 |-
 ! [[File:LfmssRdZwuE.jpg|200px| link=https://www.youtube.com/watch?v=LfmssRdZwuE]]
 | Rotating Head Prototype
-| asdf
+| 16A
-| asdf
+| Filaments
 |-
 ! [[File:YhoMTLGVAbc.png|200px| link=https://www.youtube.com/watch?v=yhoMTLGVAbc]]
 | Re-aligning the Gantry on the Hyrel Hydra 16A
-| asdf
+| 16A
-| asdf
+| All
 |-
 |}