Difference between revisions of "Videos"
Jump to navigation
Jump to search
(→2016) |
(→2016) |
||
| Line 659: | Line 659: | ||
| | | | ||
|- | |- | ||
! [[File:9_onCKhT_dg.png|200px| https://www.youtube.com/watch?v=9_onCKhT_dg]] | ! [[File:9_onCKhT_dg.png|200px| link=https://www.youtube.com/watch?v=9_onCKhT_dg]] | ||
| VOL-25 and VCD-25 Overview | | VOL-25 and VCD-25 Overview | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:QD2FrZ4kg1g.png|200px| https://www.youtube.com/watch?v=QD2FrZ4kg1g]] | ! [[File:QD2FrZ4kg1g.png|200px| link=https://www.youtube.com/watch?v=QD2FrZ4kg1g]] | ||
| KRA-15 and KCD-15 Overview | | KRA-15 and KCD-15 Overview | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:Rc2UFwjUtc4.png|200px| https://www.youtube.com/watch?v=Rc2UFwjUtc4]] | ! [[File:Rc2UFwjUtc4.png|200px| link=https://www.youtube.com/watch?v=Rc2UFwjUtc4]] | ||
| Hydra 640 (16A) Two Part Test Print | | Hydra 640 (16A) Two Part Test Print | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:Ql1NZLWVJQM.png|200px| https://www.youtube.com/watch?v=Ql1NZLWVJQM]] | ! [[File:Ql1NZLWVJQM.png|200px| link=https://www.youtube.com/watch?v=Ql1NZLWVJQM]] | ||
| Extrusion Prototype Print | | Extrusion Prototype Print | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:KtK256u0sN8.png|200px| https://www.youtube.com/watch?v=ktK256u0sN8]] | ! [[File:KtK256u0sN8.png|200px| link=https://www.youtube.com/watch?v=ktK256u0sN8]] | ||
| EMO-25 and COD-25 Overview | | EMO-25 and COD-25 Overview | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:Vn8jnvwh5to.png|200px| https://www.youtube.com/watch?v=Vn8jnvwh5to]] | ! [[File:Vn8jnvwh5to.png|200px| link=https://www.youtube.com/watch?v=Vn8jnvwh5to]] | ||
| Session 3C Slicing for Multiple Head Support | | Session 3C Slicing for Multiple Head Support | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:p1Ihd4ETxhg.png|200px| https://www.youtube.com/watch?v=p1Ihd4ETxhg]] | ! [[File:p1Ihd4ETxhg.png|200px| link=https://www.youtube.com/watch?v=p1Ihd4ETxhg]] | ||
| Session 3A - Setting Two Heads to Z-Zero | | Session 3A - Setting Two Heads to Z-Zero | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:FCuSvQm6ej4.png|200px| https://www.youtube.com/watch?v=FCuSvQm6ej4]] | ! [[File:FCuSvQm6ej4.png|200px| link=https://www.youtube.com/watch?v=FCuSvQm6ej4]] | ||
| Session 3B - Calibrating the Offset Between Two Heads | | Session 3B - Calibrating the Offset Between Two Heads | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:dkQpsJWRI4Y.png|200px| https://www.youtube.com/watch?v=dkQpsJWRI4Y]] | ! [[File:dkQpsJWRI4Y.png|200px| link=https://www.youtube.com/watch?v=dkQpsJWRI4Y]] | ||
| Session 2D - Editing Slic3r Recipes | | Session 2D - Editing Slic3r Recipes | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:kJc9sNlV0fA.png|200px| https://www.youtube.com/watch?v=kJc9sNlV0fA]] | ! [[File:kJc9sNlV0fA.png|200px| link=https://www.youtube.com/watch?v=kJc9sNlV0fA]] | ||
| Session 2E - Slicing your STL and Viewing your GCODE | | Session 2E - Slicing your STL and Viewing your GCODE | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:IQbgGwiGVZA.png|200px| https://www.youtube.com/watch?v=IQbgGwiGVZA]] | ! [[File:IQbgGwiGVZA.png|200px| link=https://www.youtube.com/watch?v=IQbgGwiGVZA]] | ||
| Session 2C - Positioning, Scaling, and Rotating your STL | | Session 2C - Positioning, Scaling, and Rotating your STL | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:mVyCq7CPGLg.png|200px| https://www.youtube.com/watch?v=mVyCq7CPGLg]] | ! [[File:mVyCq7CPGLg.png|200px| link=https://www.youtube.com/watch?v=mVyCq7CPGLg]] | ||
| Session 1A - Hardware and Software Overview | | Session 1A - Hardware and Software Overview | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:2tIHw_JIQAI.png|200px| https://www.youtube.com/watch?v=2tIHw_JIQAIv]] | ! [[File:2tIHw_JIQAI.png|200px| link=https://www.youtube.com/watch?v=2tIHw_JIQAIv]] | ||
| Session 1B - Communications and Bed Leveling | | Session 1B - Communications and Bed Leveling | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:lFATCfKJf4I.png|200px| https://www.youtube.com/watch?v=lFATCfKJf4I]] | ! [[File:lFATCfKJf4I.png|200px| link=https://www.youtube.com/watch?v=lFATCfKJf4I]] | ||
| Session 1C - Printing with Plasticine | | Session 1C - Printing with Plasticine | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:2yHRuef29L4.png|200px| https://www.youtube.com/watch?v=2yHRuef29L4]] | ! [[File:2yHRuef29L4.png|200px| link=https://www.youtube.com/watch?v=2yHRuef29L4]] | ||
| Session 2A: Simple CAD Modeling in FreeCAD | | Session 2A: Simple CAD Modeling in FreeCAD | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:RlJqdhtpB6Q.png|200px| https://www.youtube.com/watch?v=RlJqdhtpB6Q]] | ! [[File:RlJqdhtpB6Q.png|200px| link=https://www.youtube.com/watch?v=RlJqdhtpB6Q]] | ||
| PC to Printer Connectivity | | PC to Printer Connectivity | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:C88ni0huwhw.png|200px| https://www.youtube.com/watch?v=C88ni0huwhw]] | ! [[File:C88ni0huwhw.png|200px| link=https://www.youtube.com/watch?v=C88ni0huwhw]] | ||
| Using the Spindle Tool to rework Circuit Boards | | Using the Spindle Tool to rework Circuit Boards | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:KIGeQmXNbNE.png|200px| https://www.youtube.com/watch?v=KIGeQmXNbNE]] | ! [[File:KIGeQmXNbNE.png|200px| link=https://www.youtube.com/watch?v=KIGeQmXNbNE]] | ||
| Running a FADAL CNC on Hyrel3D Circuitry, Firmware and Software | | Running a FADAL CNC on Hyrel3D Circuitry, Firmware and Software | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:ImMo3V1D70w.png|200px| https://www.youtube.com/?v=ImMo3V1D70w]] | ! [[File:ImMo3V1D70w.png|200px| link=https://www.youtube.com/?v=ImMo3V1D70w]] | ||
| Table Arm (X-Arm) Block Awatchdjustment | | Table Arm (X-Arm) Block Awatchdjustment | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:yaCYFmoIESk.png|200px| https://www.youtube.com/watch?v=yaCYFmoIESk]] | ! [[File:yaCYFmoIESk.png|200px| link=https://www.youtube.com/watch?v=yaCYFmoIESk]] | ||
| MK1-250 Overview | | MK1-250 Overview | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:UvZMecXsHEM.png|200px| https://www.youtube.com/watch?v=UvZMecXsHEM]] | ! [[File:UvZMecXsHEM.png|200px| link=https://www.youtube.com/watch?v=UvZMecXsHEM]] | ||
| MK1-450 Overview | | MK1-450 Overview | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:SOGKeU3vLbs.png|200px| https://www.youtube.com/watch?v=SOGKeU3vLbs]] | ! [[File:SOGKeU3vLbs.png|200px| link=https://www.youtube.com/watch?v=SOGKeU3vLbs]] | ||
| MK2-250 Overview | | MK2-250 Overview | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:FkJT3ILlAHw.png|200px| https://www.youtube.com/watch?v=FkJT3ILlAHw]] | ! [[File:FkJT3ILlAHw.png|200px| link=https://www.youtube.com/watch?v=FkJT3ILlAHw]] | ||
| Replacing the 30M/ESR Heated Build Platform | | Replacing the 30M/ESR Heated Build Platform | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:3KwJ6OgOx14.png|200px| https://www.youtube.com/watch?v=3KwJ6OgOx14]] | ! [[File:3KwJ6OgOx14.png|200px| link=https://www.youtube.com/watch?v=3KwJ6OgOx14]] | ||
| Multi Head Printing - Nested STLs | | Multi Head Printing - Nested STLs | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:4GYWfMrs0F8.png|200px| https://www.youtube.com/watch?v=4GYWfMrs0F8]] | ! [[File:4GYWfMrs0F8.png|200px| link=https://www.youtube.com/watch?v=4GYWfMrs0F8]] | ||
| X-Axis Belt Tightening| | | X-Axis Belt Tightening| | ||
| | |||
| | | | ||
|- | |- | ||
! [[File:IkgviAGep-c.png|200px| https://www.youtube.com/watch?v=IkgviAGep-c]] | ! [[File:IkgviAGep-c.png|200px| link=https://www.youtube.com/watch?v=IkgviAGep-c]] | ||
| Y-Axis Belt Tightening | | Y-Axis Belt Tightening | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:lQy25Nlj3_Q.png|200px| https://www.youtube.com/watch?v=lQy25Nlj3_Q]] | ! [[File:lQy25Nlj3_Q.png|200px| link=https://www.youtube.com/watch?v=lQy25Nlj3_Q]] | ||
| Plasma Magnetic Vortex Deposition (ElectroSpinning) | | Plasma Magnetic Vortex Deposition (ElectroSpinning) | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:LQb5vS97jFo.png|200px| https://www.youtube.com/watch?v=LQb5vS97jFo]] | ! [[File:LQb5vS97jFo.png|200px| link=https://www.youtube.com/watch?v=LQb5vS97jFo]] | ||
| 3D Milling on the Hydra Series | | 3D Milling on the Hydra Series | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:81sVBZOOcbw.png|200px| https://www.youtube.com/watch?v=81sVBZOOcbw]] | ! [[File:81sVBZOOcbw.png|200px| link=https://www.youtube.com/watch?v=81sVBZOOcbw]] | ||
| Introducing the Hydra 640 (formerly Model 16A) | | Introducing the Hydra 640 (formerly Model 16A) | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:uPqr4S0WC3Q.png|200px| https://www.youtube.com/watch?v=uPqr4S0WC3Q]] | ! [[File:uPqr4S0WC3Q.png|200px| link=https://www.youtube.com/watch?v=uPqr4S0WC3Q]] | ||
| USBB Jumper Instructions | | USBB Jumper Instructions | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:Rw2E_d-q9bQ.png|200px| https://www.youtube.com/watch?v=Rw2E_d-q9bQ]] | ! [[File:Rw2E_d-q9bQ.png|200px| link=https://www.youtube.com/watch?v=Rw2E_d-q9bQ]] | ||
| Size Does Matter | | Size Does Matter | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:xGriCCrfkuw.png|200px| https://www.youtube.com/watch?v=xGriCCrfkuw]] | ! [[File:xGriCCrfkuw.png|200px| link=https://www.youtube.com/watch?v=xGriCCrfkuw]] | ||
| Print Heads Overview | | Print Heads Overview | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:QMyuKdgiWI4.png|200px| https://www.youtube.com/watch?v=QMyuKdgiWI4]] | ! [[File:QMyuKdgiWI4.png|200px| link=https://www.youtube.com/watch?v=QMyuKdgiWI4]] | ||
| Session 2F - Loading and Printing with Filaments, MK-Series Heads | | Session 2F - Loading and Printing with Filaments, MK-Series Heads | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:ysO8oAzFwC4.png|| https://www.youtube.com/watch?v=ysO8oAzFwC4]] | ! [[File:ysO8oAzFwC4.png|200px| link=https://www.youtube.com/watch?v=ysO8oAzFwC4]] | ||
| MK1-250 PEEK Nozzle Assembly | | MK1-250 PEEK Nozzle Assembly | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:BoHRC9m5nlQ.png|| https://www.youtube.com/watch?v=BoHRC9m5nlQ]] | ! [[File:BoHRC9m5nlQ.png|200px| link=https://www.youtube.com/watch?v=BoHRC9m5nlQ]] | ||
| New Hydra Printer Line Intro | | New Hydra Printer Line Intro | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:XREWb_Md5o0.png | ! [[File:XREWb_Md5o0.png|https://www.youtube.com/watch?v=XREWb_Md5o0]] | ||
| Bioplotting for under $10K | | Bioplotting for under $10K | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:9zxxBYbdlOE.png|| https://www.youtube.com/watch?v=9zxxBYbdlOE]] | ! [[File:9zxxBYbdlOE.png|200px| link=https://www.youtube.com/watch?v=9zxxBYbdlOE]] | ||
| Programming Head Offsets | | Programming Head Offsets | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:nfIvS50zLyc.png|| https://www.youtube.com/watch?v=nfIvS50zLyc]] | ! [[File:nfIvS50zLyc.png|200px| link=https://www.youtube.com/watch?v=nfIvS50zLyc]] | ||
| Slicing for a Two-Material Print | | Slicing for a Two-Material Print | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:0dS3bC0BnRQ.png|| https://www.youtube.com/watch?v=0dS3bC0BnRQ]] | ! [[File:0dS3bC0BnRQ.png|200px| link=https://www.youtube.com/watch?v=0dS3bC0BnRQ]] | ||
| Loading Filament and Printing with the Hyrel3D MK2-250 | | Loading Filament and Printing with the Hyrel3D MK2-250 | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:v2ifSlZ0qEw.png|200px| https://www.youtube.com/watch?v=v2ifSlZ0qEw]] | ! [[File:v2ifSlZ0qEw.png|200px| link=https://www.youtube.com/watch?v=v2ifSlZ0qEw]] | ||
| Loading Filament and Printing with the Hyrel3D MK1-250 | | Loading Filament and Printing with the Hyrel3D MK1-250 | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:q-DbAbNMW48.png|200px| https://www.youtube.com/watch?v=q-DbAbNMW48]] | ! [[File:q-DbAbNMW48.png|200px| link=https://www.youtube.com/watch?v=q-DbAbNMW48]] | ||
| Loading and Printing with the EMO-25 Print Head | | Loading and Printing with the EMO-25 Print Head | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:ej55bZXrltA.png|200px| https://www.youtube.com/watch?v=ej55bZXrltA]] | ! [[File:ej55bZXrltA.png|200px| link=https://www.youtube.com/watch?v=ej55bZXrltA]] | ||
| SDS RTV Instructions, v2 | | SDS RTV Instructions, v2 | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:MwrhV74NjCQ.png|200px| https://www.youtube.com/watch?v=MwrhV74NjCQ]] | ! [[File:MwrhV74NjCQ.png|200px| link=https://www.youtube.com/watch?v=MwrhV74NjCQ]] | ||
| Intro to Hyrel Possibilities - Jan 2016 | | Intro to Hyrel Possibilities - Jan 2016 | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:V_zCytnGvvo.png|200px| https://www.youtube.com/watch?v=V_zCytnGvvo]] | ! [[File:V_zCytnGvvo.png|200px| link=https://www.youtube.com/watch?v=V_zCytnGvvo]] | ||
| MK2-250 Dual Drive for Flexible Filaments | | MK2-250 Dual Drive for Flexible Filaments | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:O1IGa-8y9yQ.png|200px| https://www.youtube.com/watch?v=O1IGa-8y9yQ]] | ! [[File:O1IGa-8y9yQ.png|200px| link=https://www.youtube.com/watch?v=O1IGa-8y9yQ]] | ||
| 6w, 450nm Laser Test | | 6w, 450nm Laser Test | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:0JJp7HeK35M.png|200px| https://www.youtube.com/watch?v=0JJp7HeK35M]] | ! [[File:0JJp7HeK35M.png|200px| link=https://www.youtube.com/watch?v=0JJp7HeK35M]] | ||
| SDS RTV Instructions, v1 | | SDS RTV Instructions, v1 | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:XKHa1CXnSdI.png|200px| https://www.youtube.com/watch?v=XKHa1CXnSdI]] | ! [[File:XKHa1CXnSdI.png|200px| link=https://www.youtube.com/watch?v=XKHa1CXnSdI]] | ||
| Introducing the SDS Print Heads | | Introducing the SDS Print Heads | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:BlSGlOpyipI.png|200px| https://www.youtube.com/watch?v=BlSGlOpyipI]] | ! [[File:BlSGlOpyipI.png|200px| link=https://www.youtube.com/watch?v=BlSGlOpyipI]] | ||
| Sneak Peek: Pick and Place Prototype | | Sneak Peek: Pick and Place Prototype | ||
| - | | - | ||
Revision as of 18:50, 11 December 2020
Table of Videos
Please also see the Instructions page and the Help page.
Remember, you can CTRL+F to search for a keyword on this page! You can also click on a column header to sort by that column.
The following chart compares and contrasts the various heads:
http://hyrel3d.net/wiki/index.php/Main_Page#Comparison
2020
| Video Link | Subject | Applicable Model(s) | Applicable Head(s) |
|---|---|---|---|
|
The Hyrel Hydra Electrical Panel, Explained | 16A | n/a |
|
Making DXFs from Camera Images | All | Lasers |
|
Viscotec Vipro HEAD-3 on Hyrel | All | Viscotec |
|
Explaining the NEW RSD-30 | All | Reservoirs |
|
Making DXFs from CAD Models | All | Lasers |
|
4th/5th Axis Installation and Setup | 16A | All |
|
3-Phase Spindle Tool Installation and Setup | 16A | Spindles |
|
Clench/Pinch Valve Installation and Setup | All | Reservoirs |
|
Dynamic Mixing Head Installation and Setup | All | Reservoirs |
|
EHR Electronics Access | EHR | n/a |
|
ESR Unboxing and Setup | ESR | n/a |
|
RSD-30 Refrigerated Syringe Dispenser | All | Reservoirs |
|
Printing on PEI | All | Filaments |
|
Printing Cememtitious Materials at TN Tech | All | Reservoirs |
|
Tightening set screws for Hydra X-axis | 16A | n/a |
|
Interview on GA Mfg News | All | All |
|
Hyrel V4 Install No. 9: Licensing | All | All |
|
Hyrel V4 Install No. 8: Recipes | All | All |
|
Hyrel V4 Install No. 7: Settings | All | All |
|
Hyrel V4 Install No. 6`: Firmware | All | All |
|
Hyrel V4 Install No. 5: Drivers | All | All |
|
Hyrel V4 Install No. 4: Repetrel | All | All |
|
Hyrel V4 Install No. 3: Adobe Reader | All | All |
|
Hyrel V4 Install No. 2: Ecosystem Apps | All | All |
|
Hyrel V4 Install No. 1: Winrar | All | All |
|
Hydra 16AT - Tall | 16A | All |
|
Hyrel Bulk Feeder for Cementitious Materials | 16A | Reservoirs |
|
Using the new Precision Tool Setter on a Hyrel 3D Printer | 16A | All |
2019
| Video Link | Subject | Applicable Model(s) | Applicable Head(s) |
|---|---|---|---|
|
RSD-30 - Refrigerated Syringe Dispenser | All | Reservoirs |
|
Heated & Chilled Vacuum Bed | 16A, EHR | Reservoirs |
|
4th Axis Fun - Linear and Rotary Printing | 16A | All |
|
CO2 Laser - Installation Instructions | 16A | Lasers |
|
Dynamic Mixing Head DMH | All | Reservoirs |
|
Configuring Prusa Slicer for Multi-Material Support | All | Filaments |
|
Configuring the Prusa Slicer for Breakaway Support Material | All | Filaments |
|
How to Load Filament into a Hyrel 3D Print Head | All | Filaments |
|
Loading Print Heads into your Hyrel 3D Printer | All | All |
|
How to Calibrate the Z-Zero Position | 16A, 30M, ESR | All |
|
Revised 2019: Hyrel 30M Initial Setup | 30M | All |
|
How to select a Build Surface | All | Filaments |
|
How to Tram (level) the Hydra Bed | 16A | All |
|
Laser Marking on a Cylinder | All | Lasers |
|
Five Axis Machining in Brass on a Hyrel Hydra | 16A | Spindle |
|
Configuring your Hydra for a 3-phase Spindle Tool | 16A | Spindle |
|
Five Axis Machining on a Hyrel Hydra (this gcode was used) |
16A | Spindle |
|
Dispensing RTV Silicone on a Hyrel Hydra | All | Reservoirs |
|
Machining PTFE (Teflon) on a Hyrel Hydra | 16A | Spindle |
|
Rotating Head Prototype | 16A | Filaments |
|
Re-aligning the Gantry on the Hyrel Hydra 16A | 16A | All |
2018
| Video Link | Subject | Applicable Model(s) | Applicable Head(s) |
|---|---|---|---|
|
Installing the new laser Power Supply in a Hyrel Hydra | 16A | All |
|
Hyrel Tapping Enabled | 16A | Spindle |
|
Light Duty Milling with 3-Phase Spindle on a Hyrel Hydra | 16A | Spindle |
|
Improved UV Light Source for more Powerful Crosslinking | All | Reservoirs |
|
How to install 4th and 5th Axes on a Hyrel Hydra | 16A | All |
|
How to use an additional Yoke on a Hyrel Hydra | 16A | All |
|
How to install an additional Yoke on a Hyrel Hydra | 16A | All |
|
The Filament Dryer | All | Filaments |
|
Fourth and Fifth Axes Demo on a Hyrel Hydra | 16A | All |
|
Installing a fourth axis on a Hyrel Hydra | 16A | All |
|
Machining hotbeds to under 0.001" | 16A | All |
|
Setting the Z-Offset on the EHR | EHR | All |
2017
| Video Link | Subject | Applicable Model(s) | Applicable Head(s) |
|---|---|---|---|
|
CO2 Laser Marking with the Hydra | 16A | Lasers |
|
Converting a Hydra from Printer to Laser | 16A | Lasers |
|
Cutting Nylon Mesh with CO2 Laser on a Hydra | 16A | Lasers |
|
Chamber Temperature in a Cold Room | 16A | Filaments |
|
Cutting acrylic with the CO2 Laser | 16A | Lasers |
|
Tiny Heated Chilled Bed Preview | EHR | Reservoirs |
|
Fourth Axis Rotary Print | 16A | Filaments |
|
Additive Manufacturing of Toroid Inductor for Electronics Applications | 30M, ESR | Reservoirs |
|
Hyrel Hydra X and Y Belt Tension Adjustments | 16A | Maintenance |
|
Hyrel Hydra Linear Bearing Adjustments | 16A | Maintenance |
|
Hyrel Hydra Z Belt Tension Adjustments | 16A | Maintenance |
|
Changing the Address Resistor on the CO2 Laser | 16A | Maintenance |
|
CO2 Laser Alignment | 16A | Calibration |
|
Hydra Yoke Adjustment | 16A | Maintenance |
|
Hydra Yoke Angle Adjustment | 16A | Maintenance |
|
Engnie, High Resolution (EHR) Setup, Part 2 | EHR | Setup |
|
Engnie, High Resolution (EHR) Setup, Part 1 | EHR | Setup |
|
EHR Scaffold Instructions | EHR | Setup |
|
EHR Scaffold Intro | EHR | Setup |
|
Unclogging a rare clogged MK1-250 | All | Filaments |
|
Unclogging a rare clogged MK1-450 | All | Filaments |
|
Flashing Firmware on the Modified CO2 Laser Controller | 16A | Maintenance |
|
The Hyrel Hydra Family | 16A | All |
|
High Resolution Engine Vacuum Bed | EHR | Reservoirs |
|
High Resolution Engine Setup | EHR | Setup |
|
SDS Clench Valve Assembly Instructions | All | Reservoirs |
|
How to Load the SDS Clench Valve | All | Reservoirs |
|
EHR Accuracy Test | EHR | Calibration |
|
Hydra 16A Controls Overview | 16A | All |
|
Using Low Temperature Solder Paste to connect a Flat Flex Cable | 30M, ESR | Assembly |
| Draining Laser Coolant on the Hyrel Hydra | 16A | Lasers |
|
Hydra Home Calibration Details | 16A | Calibration |
|
Replacing the top component on an SDS Head Assembly | ||
|
HYDRA Hot Bed Installation | ||
|
Hydra Model Startup | All | Reservoirs |
|
Unboxing the Hydra Floor Model Units | 16A | Setup |
|
Hydra Overview by CTO Karl Gifford | 16A | All |
|
How to Manage the Pick-and-Place with Repetrel Software | 16A | Pick-and-Place |
|
Hyrel Hydra Versitility | 16A | All |
|
Hydra Vinyl Cutter Overview | 16A | Cutting |
|
Hyrel 3D Hydra Pick-and-Place Introduction | 16A | Pick-and-Place |
|
The Hyrel3D Hydra Line | 16A | All |
|
Tramming the bed on the 16A | 16A | Maintenance |
|
The Benefits of Microscope Inspection During Printing | All | Microscopes |
|
Printing PLGA for internal Biological Applications | All | Reservoirs |
2016
| Video Link | Subject | Applicable Model(s) | Applicable Head(s) |
|---|---|---|---|
|
Varialble Width Conductive Paste Extrusion | ||
|
Microscope Print View Setup | ||
|
Replacing the LED Strip | ||
|
Replacing the Front Switch Panel | ||
|
Static Mixing Head Explained - v2 Including SDS Heads | ||
|
Hot Bed Manufacturing | ||
|
Static Mixing Head Explained | ||
|
Timelapse Recording | ||
|
HotHead LEDs Explained | ||
|
LA6-450 and LA5-808 Laser Overview | ||
|
SDS and CSD Overview | ||
|
Quiet Storm Cooling Fan Overview | ||
|
VOL-25 and VCD-25 Overview | ||
|
KRA-15 and KCD-15 Overview | ||
|
Hydra 640 (16A) Two Part Test Print | ||
|
Extrusion Prototype Print | ||
|
EMO-25 and COD-25 Overview | ||
|
Session 3C Slicing for Multiple Head Support | ||
|
Session 3A - Setting Two Heads to Z-Zero | ||
|
Session 3B - Calibrating the Offset Between Two Heads | ||
|
Session 2D - Editing Slic3r Recipes | ||
|
Session 2E - Slicing your STL and Viewing your GCODE | ||
|
Session 2C - Positioning, Scaling, and Rotating your STL | ||
|
Session 1A - Hardware and Software Overview | ||
|
Session 1B - Communications and Bed Leveling | ||
|
Session 1C - Printing with Plasticine | ||
|
Session 2A: Simple CAD Modeling in FreeCAD | ||
|
PC to Printer Connectivity | ||
|
Using the Spindle Tool to rework Circuit Boards | ||
|
Running a FADAL CNC on Hyrel3D Circuitry, Firmware and Software | ||
|
Table Arm (X-Arm) Block Awatchdjustment | ||
|
MK1-250 Overview | ||
|
MK1-450 Overview | ||
|
MK2-250 Overview | ||
|
Replacing the 30M/ESR Heated Build Platform | ||
|
Multi Head Printing - Nested STLs | ||
|
|||
|
Y-Axis Belt Tightening | ||
|
Plasma Magnetic Vortex Deposition (ElectroSpinning) | ||
|
3D Milling on the Hydra Series | ||
|
Introducing the Hydra 640 (formerly Model 16A) | ||
|
USBB Jumper Instructions | ||
|
Size Does Matter | ||
|
Print Heads Overview | ||
|
Session 2F - Loading and Printing with Filaments, MK-Series Heads | ||
|
MK1-250 PEEK Nozzle Assembly | ||
|
New Hydra Printer Line Intro | ||
|
Bioplotting for under $10K | ||
|
Programming Head Offsets | ||
|
Slicing for a Two-Material Print | ||
|
Loading Filament and Printing with the Hyrel3D MK2-250 | ||
|
Loading Filament and Printing with the Hyrel3D MK1-250 | ||
|
Loading and Printing with the EMO-25 Print Head | ||
|
SDS RTV Instructions, v2 | ||
|
Intro to Hyrel Possibilities - Jan 2016 | ||
|
MK2-250 Dual Drive for Flexible Filaments | ||
|
6w, 450nm Laser Test | ||
|
SDS RTV Instructions, v1 | ||
|
Introducing the SDS Print Heads | ||
|
Sneak Peek: Pick and Place Prototype | - |
2012-2015
| Thumbnail | Title | Link | Date | Model | Category | Activity | Material Type | Other |
|---|---|---|---|---|---|---|---|---|
|
LA6-450: 6w, 450nm Diode Laser Head | https://www.youtube.com/watch?v=OceUiuTixPA | 2015.12.22 | Any | Hardware | Introduction | LA6-450 | n/a |
|
3D Printing RTV Silicone | https://www.youtube.com/watch?v=vmw0LS_f9V0 | 2015.12.18 | Any | Hardware | Demonstration | SDS-Series | n/a |
|
Loading the VCD-25 | https://www.youtube.com/watch?v=YWe3TQGgNW0 | 2015.12.09 | Any | Hardware | Instruction | VCD-25 | n/a |
|
Short Porcelain Print Demo | https://www.youtube.com/watch?v=huJuexTLbYA | 2015.12.08 | Any | Hardware | Demonstration | EMO-25 | n/a |
|
Replacing the Tablet Interface Board | https://www.youtube.com/watch?v=b583I7AlGJI | 2015.11.25 | System 30M, EHR | Hardware | Instruction | n/a | n/a |
|
2016 Design Contest Video | https://www.youtube.com/watch?v=ZKAzXoJ0q8Y | 2015.11.17 | System 30M | Hardware | Contest | All | n/a |
|
DXF to Laser Gcode Generation | https://www.youtube.com/watch?v=YRsyEGHyt3k | 2015.10.20 | Any | Software | Instruction | Laser, Spindle Tool | n/a |
|
Printing PEEK (PolyEther Ether Ketone) and PC (PolyCarbonate) | https://www.youtube.com/watch?v=Om9cjxMXuxY | 2015.09.29 | Any | Hardware | Demonstration | MK1-450 | n/a |
|
Healing with MeshLab | https://www.youtube.com/watch?v=IreaoCfQ8mE | 2015.09.01 | Any | Software | Instruction | Any | n/a |
|
Postprocessing with a Heat Gun | https://www.youtube.com/watch?v=0Aj9WCabPgw | 2015.08.17 | Any | Hardware | Instruction | Any | n/a |
|
Introduction to Hyrel 3D Possibilities, 2015 | https://www.youtube.com/watch?v=4oxCqR_DVNQ | 2015.08.11 | All | Hardware | Introduction | All | n/a |
|
Updating to Repetrel 2 4xx | https://www.youtube.com/watch?v=n4QwiuQtjO0 | 2015.08.06 | All | Software | Instruction | n/a | n/a |
|
Updating your 407 Motion Controller | https://www.youtube.com/watch?v=cFAFRkpLmww | 2015.07.24 | All | Software | Instruction | n/a | n/a |
|
Replacing the HOTHEAD controller | https://www.youtube.com/watch?v=XKCEkKSolZc | 2015.07.23 | All | Hardware | Instruction | n/a | n/a |
|
Programming the HOTBED controller on the System 30M and ESR | https://www.youtube.com/watch?v=yM8QMZBTb4o | 2015.07.22 | All | Software | Instruction | n/a | n/a |
|
Printing with Cloning - three heads in Parallel | https://www.youtube.com/watch?v=cuRcIE-Jbyc | 2015.07.21 | All | Software | Instruction | n/a | n/a |
|
Older Instructions, Slicing for Multiple Head Support | https://www.youtube.com/watch?v=VMyS3h4qiSA | 2015.07.17 | All | Software | Slicing | Any | n/a |
|
Leveling the X-Arm on System 30M, Engine SR | https://www.youtube.com/watch?v=0gFX6Mh-ths | 2015.06.02 | System 30M, Engine SR | Hardware | Instruction | n/a | n/a |
|
Correcting Y-Arm Flexation Fix on the System 30M, Engine SR | https://www.youtube.com/watch?v=LZd0ecogGlQ | 2015.03.18 | System 30M, Engine SR | Hardware | Instruction | n/a | n/a |
|
Manually Setting the Z-Zero Position | https://www.youtube.com/watch?v=ArDX4UpflmE | 2015.03.09 | System 30M, Engine SR | Hardware | Instruction | n/a | n/a |
|
Picking Right 3D Printer For You | https://www.youtube.com/watch?v=vc9gBZtUL7c | 2015.02.08 | All | Hardware | Overview | All | n/a |
|
Changing the Main I/O Board, System 30M, ESR | https://www.youtube.com/watch?v=66S9XJ-KeU8 | 2015.02.12 | All | Hardware | Overview | All | Spine |
|
Laser Test Print | https://www.youtube.com/watch?v=yEePz8_0ttc | 2015.02.17 | All | Hardware | Demonstration | LA5-808 Diode Laser | n/a |
|
EMO Series Printing Tips | https://www.youtube.com/watch?v=tLHpaePTP-k | 2015.02.10 | All | Hardware | Instruction | EMO Series (EMO, COD, VOL, VCD, KRA, KCD, KR2, KC2) | n/a |
|
Changing Power Supplies in the 30M and ESR | https://www.youtube.com/watch?v=Zl1sqy6PWx8 | 2015.02.04 | 30M, ESR | Hardware | Instruction | Any | n/a |
|
Multi-Head Calibration Guide | https://www.youtube.com/watch?v=IQscrgv6uaQ | 2015.02.03 | Any | Hardware/Software | Instruction | Any | n/a |
|
LA5-808 "Shark V" Diode Laser | https://www.youtube.com/watch?v=0lpa4nENtyQ | 2015.01.14 | Any | Hardware | Introduction | LA5-808 | n/a |
|
Luer Tip Kit for EMO and SDS Series Print Heads | https://www.youtube.com/watch?v=mPYPWjnDGho | 2014.12.23 | Any | Hardware | Introduction | LTK | n/a |
|
Print Head SDK | https://www.youtube.com/watch?v=-VHxf182fIs | 2014.12.09 | All | Hardware, Software | Introduction | SDK | n/a |
|
MK Series Printing Tips | https://www.youtube.com/watch?v=Fg9omXlYR-Q | 2014.11.12 | All | Procedure | Instruction | MK Series | n/a |
|
Replacing fuses (old) on the Yoke | https://www.youtube.com/watch?v=EosKDe-SyUI | 2014.08.27 | ALL | Hardware | Instruction | All | n/a |
|
Loading the EMO-type Reservoirs | https://www.youtube.com/watch?v=4yuzpUqeE-Y | 2014.04.23 | ALL | Hardware | Instruction | EMO, COD, VOL, VCD, KRA, KCD, KR2, KC2 | n/a |
|
Changing the Economics of 3D Printing | https://www.youtube.com/watch?v=xQFacnpzmv0 | 2013.12.24 | All | Hardware | Demonstration | n/a | n/a |
|
System 30M Product Release | https://www.youtube.com/watch?v=c9HvQ3SepoM | 2013.10.29 | System 30M | Hardware, Software | Introduction | n/a | n/a |
|
Simultaneous 3D Printing of Multiple Parts | https://www.youtube.com/watch?v=P6aMBQSZPgg | 2013.07.02 | All | Hardware, Software | Demonstration | MK1-250 | n/a |
|
3D Printing with Sugru The Amazing Self-Setting Rubber | https://www.youtube.com/watch?v=nuii5rP53Js | 2013.06.19 | Any | Hardware | Demonstration | EMO-25 | n/a |
|
3D Printing with Play-Doh | https://www.youtube.com/watch?v=dihvAQR7LQg | 2013.06.04 | All | Hardware | Demonstration | EMO-25 | n/a |
|
3D Printing with Plasticine | https://www.youtube.com/watch?v=cw8XiW46G0k | 2013.04.13 | Any | Hardware | Demonstration | EMO-25 | n/a |
|
3D Printing with Air-Dry Modeling Clay | https://www.youtube.com/watch?v=trdz4YDbdsw | 2013.04.06 | Any | Hardware | Demonstration | EMO-25 | n/a |
|
Interchangeable Hot-Swappable Heads | https://www.youtube.com/watch?v=XNwv7Dw_Zwg | 2013.05.12 | Any | Hardware, Software | Demonstration | MK1-250 | n/a |
|
Thank you, Kickstarters! | https://www.youtube.com/watch?v=mu9xMmkZFns | 2012.11.05 | All | Hardware, Software | Thank You | n/a | n/a |
|
Quick Tour of our Main Shop! | https://www.youtube.com/watch?v=Z9rgkw5r4l4 | 2012.10.17 | All | Introduction | Thank You | n/a | n/a |