Difference between revisions of "Engines"

From Hyrel3D
Jump to navigation Jump to search
 
(26 intermediate revisions by the same user not shown)
Line 1: Line 1:
[[Category:Hardware]]
[[Category:Hardware]]
[[Category:Printers]]
[[Category:Printers]]
{| align="right"
{| align="right"  
| __TOC__
| __TOC__  
|}
|}


== Engine Models ==
== Engine Models ==


{| border="1" class="wikitable"
The Engine is the unenclosed model, and may be configured as follows:
|+ Engine Model Comparison
 
{| border="1" class="wikitable" style="text-align: center"
|+ CURRENT Engine Model Comparison - as of January, 2021
! Model
! Model
! E1 <br/> Tinkerer
! Engine SR <br> Standard Resolution
! E2 <br/> Hobbyist
! Engine HR <br> High Resolution
! E3 <br/> Apprentice
|-
! E4 <br/> Journeyman
! Image
! E5 <br/> Professional
| <gallery>File:ENG.jpg</gallery> || <gallery>File:EHR.png</gallery>
|-
|-
! Heated Build Platform
| yes || yes
|-
! Integrated Tablet PC
| yes || yes
|-
! Initial Heads
| 1 || 1
|-
! Maximum Heads
| 4 || 3
|-
! X/Y-Axes Motion Control
| Belts || Precision Ball Screws
|-
! Z-Axis Motion Control
| Precision Ball Screw || Precision Ball Screw
|-
! Positional Resolution <br> X / Y / Z in μm
| <10 / <10 / <1 || <1.25 / <1.25 / <1
|-
! Positional Accuracy <br> X / Y / Z in μm
| <50 / <50 / <10 || <12 / <12 / <10
|-
! Positional Repeatability <br> X / Y / Z in μm
|  <25 / <25 / <5 || <12 / <12 / <5
|-
! Precise X/Y Output <br> for Bioplots
| 100 μm lines <br> 200 μm spacing || '''50 μm lines <br> 100 μm spacing'''
|-
! Precise Z output <br> for Bioplots
| 25 μm layers || 25 μm layers
|-
|}
For reference, the initial Engine configurations were as follows:
{| border="1" class="wikitable"
|+ <span style="color:red">OLD Engine Model Comparison - DISCONTINUED</span>
! Model
! E1 <br/> Tinkerer <br> <span style="color:red">DISCONTINUED</span>
! E2 <br/> Hobbyist <br> <span style="color:red">DISCONTINUED</span>
! E3 <br/> Apprentice <br> <span style="color:green">SEE Engine SR</span>
! E4 <br/> Journeyman <br> <span style="color:red">DISCONTINUED</span>
! E5 <br/> Professional <br> <span style="color:red">DISCONTINUED</span>
|- style="text-align:center;"
! Heated Build Platform
! Heated Build Platform
| no || yes || yes || yes || yes
| no || yes || yes || yes || yes
|-
|- style="text-align:center;"
! Integrated PC <br/> & Touchscreen
! Integrated PC <br/> & Touchscreen <br/> or Tablet PC
| no || no || yes || yes || yes
| no || no || yes || yes || yes
|-
|- style="text-align:center;"
! Initial Heads
! Initial Heads
| 1 || 1 || 1 || 2 || 4
| 1 || 1 || 1 || 2 || 4
|-
|- style="text-align:center;"
! Maximum Heads
! Maximum Heads
| 4 || 4 || 4 || 4 || 4
| 4 || 4 || 4 || 4 || 4
|-
|}
|}


== Technical Data ==
== Technical Data ==
=== Temperature ===
* The [[HotBed]] can be heated to any temperature up to 70°C by default, and up to 110°C if reconfigured.
* The [[MK-1]] can be heated to 260°C (limited life); we recommend sustained use at 250°C or below. PLA, PET, ABS and Nylon work well at 225-230°C
* The [[EMO-25]] prints at room temperature
* The [[VOL-25]] can be heated to 100°C
For more details about each head, see the page for that head.
=== Resolution ===
Our positional resolution is better than five microns in the X and Y (.0002”, or 2/10 of a mil or .2 mils), and better than half a micron in the Z (.0002”, or 2/100 of a mil or .02 mils)
=== Accuracy ===
Our positional accuracy is +/- 50 microns in the X and Y over an 8” travel area And +/- 20 microns in the Z over an 8” travel area
=== Repeatability ===
Our positional repeatability is about 25 microns in the X and Y (.001”, or 1 mil) And about 10 microns in the Z (.0004”, or 4/10 of a mil or .4 mils)
=== Layer Height ===
We have successfully printed in ABS with a 25µm (.025mm) layer height, but this is very time consuming. 
* We often use a 300µm (.3mm) layer height with the .5mm nozzle on the MK-1 for 1.75mm filaments.
* We often use a 600 µm (.6mm) layer height with the 1mm nozzle on the EMO-25 for pasty extrudables.
=== Print Speed===
The best print speed manageable (without sacrificing quality) is variable, and depends not only on the material being used and layer height, but also on how much mass is being moved in the X and Y.  We normally print at 1.5m/min, or 25mm/sec with both the MK-1 and the EMO-25
=== Build Volume ===
Engines have a build volume of 200 x 200 x 200 mm.
=== Form Factor ===
Engines are 13” wide x 15” deep (plus 7” of rear space for spool rods), and are 21” tall plus heads, which can add another 10” to the height.
   
   
=== Adjustments ===     
=== Adjustments ===     
Line 69: Line 85:
* Extruder temperature (at slicing, in g-code editor, or manually during build) (MK-1, VOL-25)
* Extruder temperature (at slicing, in g-code editor, or manually during build) (MK-1, VOL-25)
* Cooling Fan speed (at slicing, in g-code editor, or manually during build (MK-1, QS-1)
* Cooling Fan speed (at slicing, in g-code editor, or manually during build (MK-1, QS-1)
* HotBed Temperature (manually, prior to or during build)
* HotBed Temperature (at slicing, in g-code editor, or manually during build)
 
''Or, is tabular better?''
 
{| border="1" class="wikitable"
|+ Adjustments
! Metric
! Units
! During Slicing
! In G-Code Editor
! GUI During Build
|-
! Speed of Travel
| mm/min || yes || yes || no
|-
! Layer Thickness
| mm || yes || no || no
|-
! Flow Rate
| nL/sec || yes || yes || yes
|-
! Extruder Temperature
| °C || yes || yes || yes
|-
! Fan Speed
| % of max || yes || yes || yes
|-
! HotBed
| °C || yes || yes || yes
|-
|}

Latest revision as of 19:36, 27 January 2021

Engine Models

The Engine is the unenclosed model, and may be configured as follows:

CURRENT Engine Model Comparison - as of January, 2021
Model Engine SR
Standard Resolution 		Engine HR
High Resolution
Image
  • ENG.jpg
  • EHR.png
Heated Build Platform yes yes
Integrated Tablet PC yes yes
Initial Heads 1 1
Maximum Heads 4 3
X/Y-Axes Motion Control Belts Precision Ball Screws
Z-Axis Motion Control Precision Ball Screw Precision Ball Screw
Positional Resolution
X / Y / Z in μm 		<10 / <10 / <1 <1.25 / <1.25 / <1
Positional Accuracy
X / Y / Z in μm 		<50 / <50 / <10 <12 / <12 / <10
Positional Repeatability
X / Y / Z in μm 		<25 / <25 / <5 <12 / <12 / <5
Precise X/Y Output
for Bioplots 		100 μm lines
200 μm spacing		 50 μm lines
100 μm spacing
Precise Z output
for Bioplots 		25 μm layers 25 μm layers


For reference, the initial Engine configurations were as follows:

OLD Engine Model Comparison - DISCONTINUED
Model E1
Tinkerer
DISCONTINUED 		E2
Hobbyist
DISCONTINUED 		E3
Apprentice
SEE Engine SR 		E4
Journeyman
DISCONTINUED 		E5
Professional
DISCONTINUED
Heated Build Platform no yes yes yes yes
Integrated PC
& Touchscreen
or Tablet PC 		no no yes yes yes
Initial Heads 1 1 1 2 4
Maximum Heads 4 4 4 4 4

Technical Data

Adjustments

  • Speed of travel (at slicing or in g-code editor)
  • Layer thickness (at slicing)
  • Volume of flow per unit distance (at slicing or in g-code editor)
  • Extruder temperature (at slicing, in g-code editor, or manually during build) (MK-1, VOL-25)
  • Cooling Fan speed (at slicing, in g-code editor, or manually during build (MK-1, QS-1)
  • HotBed Temperature (at slicing, in g-code editor, or manually during build)

Or, is tabular better?

Adjustments
Metric Units During Slicing In G-Code Editor GUI During Build
Speed of Travel mm/min yes yes no
Layer Thickness mm yes no no
Flow Rate nL/sec yes yes yes
Extruder Temperature °C yes yes yes
Fan Speed % of max yes yes yes
HotBed °C yes yes yes
Retrieved from "https://hyrel3d.in/wiki/index.php?title=Engines&oldid=5706"