Difference between revisions of "Other accessories"

From Hyrel3D
Jump to navigation Jump to search
(Created page with "Category:Hardware {| align="right" | __TOC__ |} === '''Tool Position Accessories''' === ==== Lasers ==== Hot-swappable Lasers are available in the following configurati...")
 
 
(9 intermediate revisions by the same user not shown)
Line 4: Line 4:
|}
|}


=== '''Tool Position Accessories''' ===
Accessories other than print heads are available, some of which take a tool position.


==== Lasers ====
=== Lasers ===


Hot-swappable Lasers are available in the following configurations:
See our page for [[Lasers]].


* The LA5-808 is 5W at 808nm, and due to its wavelength, it is best suited for darker material.
=== Spindle Tools ===
* The LA6-450 is 6W at 450nm, and performs well on opaque material of any color.
 
* [[File:Yt.png]] [https://www.youtube.com/watch?v=Tz6mRSkOaSk Overview of the LA5-808 and LA6-450 Lasers]
 
The Reflectivity and Transparency or Translucency of your material will have a great impact on the effectiveness of the laser. Safety glasses are included with each laser.
 
==== Spindle Tools ====


<gallery>
<gallery>
File:ST1.png|ST1
File:ST1.png|ST1
File:ST3.jpg|ST3
</gallery>
</gallery>


Intended for light drilling and routing operations (especially circuit board work), the ST1 provides between 500 and 5000 RMP (depending on load) to a 1/8" chuck. Our Repetrel software can process Gerber and DRL files for the Spindle Tool and/or the Lasers.
The ST1 is intended for light drilling and routing operations (especially circuit board work), and provides between 500 and 5,000 RMP (depending on load) to a 1/8" chuck. 12VDC, 4A, 40W.
 
The ST3 is intended for light drilling and machining operations (even on brass), and provides between 2,000 and 12,000 RMP (depending on load) to a 1/48" chuck. 48VDC, 8.3A, 400W.


=== '''Other Tool Position Accessories''' ===
Our Repetrel software can process Gerber and DRL files for the Spindle Tool and/or the Lasers.


The following accessories each take up a tool position while performing more passive functions:
=== '''Other Accessories''' ===


* The Inspector microscope provides magnification.
The following accessories each take up a tool position while performing more ancillary functions:
 
* The Mic200 (200x Microscope) provides magnification and capture of images and video.
* The Quiet Storm fan provides additional cooling.
* The Quiet Storm fan provides additional cooling.
* The Tramming Tool, provided with every printer, is used to level the build surface.
* The Tramming Tool, provided with every printer, is used to level the build surface.
* The Precision Tool Setter! See https://www.youtube.com/watch?v=rW7h9z5DW5A


=== '''Non-Tool Position Accessories''' ===
The following accessories are not loaded into tool positions on the yoke:
 
The following non-head accessories are also available:


* The HTC - Enclosure Heater with Temperature Control is avialable in 120 and 240 VAC versions. [[:File:Htc.jpg|Spec Sheet]]
* The Feed Chamber Cooling Fan mounts on Hot Flow heads to provide additional cooling to the feed chamber. This is desirable with low temperature filaments like PLA.
* The Feed Chamber Cooling Fan mounts on Hot Flow heads to provide additional cooling to the feed chamber. This is desirable with low temperature filaments like PLA.
* The Printer Support Kit is included with every printer, and includes a build plate, blue tape, and a variety of handy tools like tweezers, razors, and a spatula.
* The Printer Support Kit is included with every printer, and includes a build plate, blue tape, and a variety of handy tools like tweezers, razors, and a spatula.
* The SDK | Software Developer's Kit provides hardware, software, and the source code for developing your own firmware for your own compatible heads.
* The SDK - Software Developer's Kit provides hardware, software, and the source code for developing your own firmware for your own compatible heads.
* The LTK | Luer Tip Kit provides an EMO to Luer adapter and a variety of luer lock needles.
* The LTK - Luer Tip Kit provides an EMO to Luer adapter and a variety of luer lock needles.
* The Syringe Kit provides syringes in quantity.
* The Syringe Kit provides syringes in quantity.
* The Drill Bit Kit provides an assortment of drilling bits and end mills for the Spindle Tool.
* The Drill Bit Kit provides an assortment of drilling bits and end mills for the Spindle Tool.
* The Filament Kit provides a variety of filaments to get you started with your printer.
* The Filament Kit provides a variety of filaments to get you started with your printer.

Latest revision as of 15:08, 16 August 2021

Accessories other than print heads are available, some of which take a tool position.

Lasers

See our page for Lasers.

Spindle Tools

  • ST1

  • ST3

The ST1 is intended for light drilling and routing operations (especially circuit board work), and provides between 500 and 5,000 RMP (depending on load) to a 1/8" chuck. 12VDC, 4A, 40W.

The ST3 is intended for light drilling and machining operations (even on brass), and provides between 2,000 and 12,000 RMP (depending on load) to a 1/48" chuck. 48VDC, 8.3A, 400W.

Our Repetrel software can process Gerber and DRL files for the Spindle Tool and/or the Lasers.

Other Accessories

The following accessories each take up a tool position while performing more ancillary functions:

  • The Mic200 (200x Microscope) provides magnification and capture of images and video.
  • The Quiet Storm fan provides additional cooling.
  • The Tramming Tool, provided with every printer, is used to level the build surface.
  • The Precision Tool Setter! See https://www.youtube.com/watch?v=rW7h9z5DW5A

The following accessories are not loaded into tool positions on the yoke:

  • The HTC - Enclosure Heater with Temperature Control is avialable in 120 and 240 VAC versions. Spec Sheet
  • The Feed Chamber Cooling Fan mounts on Hot Flow heads to provide additional cooling to the feed chamber. This is desirable with low temperature filaments like PLA.
  • The Printer Support Kit is included with every printer, and includes a build plate, blue tape, and a variety of handy tools like tweezers, razors, and a spatula.
  • The SDK - Software Developer's Kit provides hardware, software, and the source code for developing your own firmware for your own compatible heads.
  • The LTK - Luer Tip Kit provides an EMO to Luer adapter and a variety of luer lock needles.
  • The Syringe Kit provides syringes in quantity.
  • The Drill Bit Kit provides an assortment of drilling bits and end mills for the Spindle Tool.
  • The Filament Kit provides a variety of filaments to get you started with your printer.
Retrieved from "https://hyrel3d.in/wiki/index.php?title=Other_accessories&oldid=6356"