Difference between revisions of "MK1-250"
Jump to navigation
Jump to search
| Line 42: | Line 42: | ||
== Loading the Head onto the Printer == | == Loading the Head onto the Printer == | ||
As with all Hyrel heads, the following process should be followed: | |||
# | |||
== Loading material into the Head == | == Loading material into the Head == | ||
Revision as of 16:51, 4 October 2016
The MK1-250 is our primary workhorse print head, and works for standard (rigid) 1.75mm filaments which print at temperatures up to 250°C.
This includes the following materials:
- ABS (Acrylonitrile Butadiene Styrene)
- Flame Retardant ABS
- ABS - PC Alloy
- Conductive ABS
- Smart ABS
- HIPS (High-Impact PolyStyrene)
- LayBrick
- LayWoo-d3
- Nylon
- Taulman 618, 645, 910
- PC (PolyCarbnoate)
- PET (PolyEthylene Terephthalate)
- PETG PolyEthylene Terephthalate Glycol-modified)
- PLA (Polylactic acid)
- Conductive PLA
- SS PLA (Stainless Steel infused)
- PP (PolyPropylene)
- PVA (PolyVinyl Alcohol)
- T-Glase
Description
- The MK1-250 is fed filament from the top, through low friction tubing (2mm ID, 4mm OD) seated into a 4mm pneumatic fitting.
- A cover plate maintains pressure, via a spring, against a rod with two bearings; these bearings keep the filament pressed against and centered on the gibbed (toothed) portion of the drive shaft of the stepping motor.
- Beneath this, the filament enters into a 2mm OD PTFE guide tube, which leads the filament to the brass nozzle, with which the PTFE tubing mates.
- At the nozzle, heat is transferred to the filament, whereupon it is forced out through the brass nozzle.
Loading the Head onto the Printer
As with all Hyrel heads, the following process should be followed:
Loading material into the Head
asdf
Default Parameters
asdf
Adjustments
asdf