Difference between revisions of "Instructions"

From Hyrel3D
Jump to navigation Jump to search
 
(85 intermediate revisions by 3 users not shown)
Line 8: Line 8:
== '''Before You Get Started''' ==
== '''Before You Get Started''' ==


'''Unboxing Your Printer:'''
<span style="color: red;">'''ALL printer models:'''</span>


# [[File:Yt.png]] [https://www.youtube.com/watch?v=T2R3cuBm0S8 Motor Setup]
=== Unboxing and Initial Setup: 30M Models ===
{| border="1" class="wikitable"
| <gallery>File:S30M.jpg</gallery>
|
# '''PDF:''' [http://hyrel3d.net/instructions/HYREL%20LLC%20-%20Quick%20Start%20Guide%20v01a.pdf Quick Start Instructions]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=bHxC2__DPsM System 30M Unboxing ]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=0Apq3tlila8 System 30M Initial Setup]
|-
|}
=== Unboxing and Initial Setup: ESR Models ===
{| border="1" class="wikitable"
| <gallery>File:ENG.jpg</gallery>
|
# '''PDF:''' [http://hyrel3d.net/instructions/HYREL%20LLC%20-%20Quick%20Start%20Guide%20v01a.pdf Quick Start Instructions]  
# '''PDF:''' [http://hyrel3d.net/instructions/HYREL%20LLC%20-%20Quick%20Start%20Guide%20v01a.pdf Quick Start Instructions]  
# [[File:Yt.png]] [https://www.youtube.com/watch?v=bHxC2__DPsM Unboxing Video]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=T2R3cuBm0S8 Plugging in Motor Cables]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=WSwerPx93qA ESR Unboxing and Initial Setup]
|-
|}


== '''Basic Printing:  One STL, One Head''' ==
=== Unboxing and Initial Setup: Hydra Models ===
 
{| border="1" class="wikitable"
| <gallery>File:H21.jpg</gallery>
|
# [[File:Yt.png]] [https://www.youtube.com/watch?v=T2R3cuBm0S8 Plugging in Motor Cables]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=FTPT0TiFSJw Hydra 21 Model Unboxing]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=NQn0MgFGswE Hydra 21 Bed Leveling]
Older videos below still generally apply:
# [[File:Yt.png]] [https://www.youtube.com/watch?v=fuLCsqfAX3E Hydra Model Startup]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=pPtGSwyS140 Hydra Home Calibration Details]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=Udbu_Zuh8k0 Hydra Model Controls Overview]
|-
|}
 
=== Unboxing and Initial Setup: Engine HR (High Resolution) ===
 
{| border="1" class="wikitable"
| style="text-align:center;" | <gallery>File:EHR.png</gallery>
|
# [[File:Yt.png]] [https://www.youtube.com/watch?v=T2R3cuBm0S8 Plugging in Motor Cables]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=BZjoNhQcYb8 Unboxing and Set Up of the EHR]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=NbWgw9KY6Ic How the Engine HR is Set Up, Part 1]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=xMsXzGPHjng How the Engine HR is Set Up, Part 2]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=O1xmXCdj1xE Setting the Z-Zero on the EHR, older]
|-
| colspan="2" style="background-color:#ffffff;" |
'''GCODE to establish sensor-based home in Z and in X/Y:'''
'''G28 Z0''' ''; home Z''
'''G28 X0 Y0''' ''; home X/Y''
 
'''GCODE to insert BEFORE first move,''' ''assuming 28.2 as your calculated Z-Zero above absolute Zero:''
'''M660 H2 Z28.2''' ''; set tool height for tool two (Z offset)''
 
'''GCODE to insert ON first move,'''
Before: G1 Z0.275 F360 ; move to next layer (0)
After:  G1 Z0.275 F360 '''H2''' ; move to next layer (0) ''and invoke head Z offset for this tool''
|-
|}
<span style="color: maroon;">''Please complete the steps above for your model of printer before printing.''</span>
 
== '''BASIC Printing:  One STL, One Head''' ==


=== First Training Session ===
=== First Training Session ===


==== Overview, Tramming, Printing with an Emulsifiable ====
==== Overview, Tramming, Printing with Reservoirs ====


{| border="1" class="wikitable"
|
# '''PDF:''' [http://hyrel3d.net/instructions/t1/HYREL%203D%20-%20T1%20Training%20Session.pdf First Training Session]
# '''PDF:''' [http://hyrel3d.net/instructions/t1/HYREL%203D%20-%20T1%20Training%20Session.pdf First Training Session]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=mVyCq7CPGLg Session 1A: Hardware and Software Overview Video]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=mVyCq7CPGLg Session 1A: Hardware and Software Overview Video]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=2tIHw_JIQAI Session 1B: Communications and Tramming Video]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=2tIHw_JIQAI Session 1B: Communications and Tramming Video]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=lFATCfKJf4I Session 1C: Setting Z-Zero and Emulsifiable Print Video]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=lFATCfKJf4I Session 1C: Setting Z-Zero and Emulsifiable Print Video]
|}


==== Additional Emulsifiable Videos ====
==== Additional Emulsifiable Videos ====


# [[File:Yt.png]] [https://www.youtube.com/watch?v=tLHpaePTP-k EMO Series Printing Tips]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=tLHpaePTP-k EMO Series Printing Tips]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=4yuzpUqeE-Y Loading the EMO-25]
# Overview of Reservoir-based Print Heads:
# [[File:Yt.png]] [https://www.youtube.com/watch?v=IEmQJxlPnuY More Loading the EMO-25]
## [[File:Yt.png]] [https://www.youtube.com/watch?v=ktK256u0sN8 Overview of the EMO Heads]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=YWe3TQGgNW0 Loading the VCD Head]
## [[File:Yt.png]] [https://www.youtube.com/watch?v=h95IurET7UM Overview of the SDSHeads]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=0JJp7HeK35M Loading the SDS Head]
## [[File:Yt.png]] [https://www.youtube.com/watch?v=9_onCKhT_dg Overview of the VOL Heads]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=ej55bZXrltA Loading the SDS Head with RTV]
## [[File:Yt.png]] [https://www.youtube.com/watch?v=QD2FrZ4kg1g Overview of the KR2 Heads]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=q-DbAbNMW48 Loading and Printing with the EMO-25]
## [[File:Yt.png]] [https://www.youtube.com/watch?v=DQj6oLfrbLo Overview of the SMH-2 Head]
# Loading Reservoir-based Print Heads:
## [[File:Yt.png]] [https://www.youtube.com/watch?v=4yuzpUqeE-Y Loading the EMO-25]
## [[File:Yt.png]] [https://www.youtube.com/watch?v=IEmQJxlPnuY More Loading the EMO-25]
## [[File:Yt.png]] [https://www.youtube.com/watch?v=YWe3TQGgNW0 Loading the VCD Head]
## [[File:Yt.png]] [https://www.youtube.com/watch?v=0JJp7HeK35M Loading the SDS Head]
## [[File:Yt.png]] [https://www.youtube.com/watch?v=ej55bZXrltA Loading the SDS Head with RTV]
## [[File:Yt.png]] [https://www.youtube.com/watch?v=q-DbAbNMW48 Loading and Printing with the EMO-25]


=== Second Training Session ===
=== Second Training Session ===


==== CAD Modeling, Healing, Positioning, and Printing with Filament ====
==== CAD Modeling, Positioning, and Printing with Filaments ====


{| border="1" class="wikitable"
|
# '''PDF:''' [http://hyrel3d.net/instructions/HYREL%203D%20-%20Simple%20Print.pdf Second Training Session]
# '''PDF:''' [http://hyrel3d.net/instructions/HYREL%203D%20-%20Simple%20Print.pdf Second Training Session]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=2yHRuef29L4 Session 2A: Simple CAD Modeling in FreeCAD Video]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=2yHRuef29L4 Session 2A: Simple CAD Modeling in FreeCAD Video]
Line 45: Line 121:
# [[File:Yt.png]] [https://www.youtube.com/watch?v=kJc9sNlV0fA Session 2E: Slicing your STL and Viewing your GCODE Video]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=kJc9sNlV0fA Session 2E: Slicing your STL and Viewing your GCODE Video]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=v2ifSlZ0qEw Session 2F: Loading and Printing with Filaments Video]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=v2ifSlZ0qEw Session 2F: Loading and Printing with Filaments Video]
|}


==== Additional Filament Videos ====
==== Additional Filament Videos ====
Line 64: Line 141:
=== Additional Basic Printing Instructions ===
=== Additional Basic Printing Instructions ===


# '''PDF:''' [http://hyrel3d.net/pdfs/Repetrel-Printing-Steps-V01d.pdf Repetrel 3D Printing Basics]
# '''PDF:''' [http://hyrel3d.net/pdfs/Repetrel-Printing-Steps-V01d.pdf BASIC Printing Instructions]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=q90Bj07MiqI HotHead/HotBed 103 Controller Board LEDs Explained]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=lK_x0M8p9Ew Tramming your Bed: Systems and Engines, 2015 and later]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=lK_x0M8p9Ew Tramming your Bed: Systems and Engines, 2015 and later]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=soY9uOw3nCM Tramming your Bed: Earlier Systems and Engines]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=soY9uOw3nCM Tramming your Bed: Earlier Systems and Engines]


== '''Intermediate Printing: One STL, Multiple Heads''' ==


# '''PDF:''' [http://hyrel3d.net/instructions/HYREL%20LLC%20-%20MultiPrint%20v0.6.pdf Intermediate Printing]
 
<span style="color: maroon;">''Please become skilled at BASIC Printing before moving to INTERMEDIATE Printing.''</span>
 
== '''INTERMEDIATE Printing: One STL, Multiple Heads''' ==
 
# '''PDF:''' [http://hyrel3d.net/instructions/HYREL%20LLC%20-%20MultiPrint%20v0.6.pdf Intermediate Printing Instructions]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=p1Ihd4ETxhg Session 3A - Setting Two Heads to Z-Zero]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=p1Ihd4ETxhg Session 3A - Setting Two Heads to Z-Zero]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=FCuSvQm6ej4 Session 3B - Calibrating Offsets Between Two Heads]
## [[File:Yt.png]] [https://www.youtube.com/watch?v=IQscrgv6uaQ Session 3A - Alternate Version]
## '''GCODE:''' [http://hyrel3d.net/downloads/gcode/PLUS.GCODE Calibration Target]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=FCuSvQm6ej4 Session 3B - Calibrating the Offset Between Two Heads]
# [[File:Yt.png]] Session 3C - Slicing for Second Head Support
## [http://hyrel3d.com/downloads/PhoneBuddy2.9.apk PhoneBuddy App] for using your smartphone to calibrate offests
# [[File:Yt.png]] Session 3D - Printing with Second Head Support
## '''GCODE:''' [http://hyrel3d.com/downloads/plus.gcode Calibration Target]
# [[File:Yt.png]] Session 3E - [https://www.youtube.com/watch?v=cuRcIE-Jbyc Clone or Parallel Printing]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=Vn8jnvwh5to Session 3C - Slicing and Printing with Second Head Support]
# [[File:Yt.png]] Session 3D - [https://www.youtube.com/watch?v=cuRcIE-Jbyc Clone or Parallel Printing]
 


== '''Advanced Printing: Multiple STLs, Multiple Heads''' ==
 
<span style="color: maroon;">''Please become skilled at INTERMEDIATE Printing before moving to ADVANCED Printing.''</span>
 
== '''ADVANCED Printing: Multiple STLs, Multiple Heads''' ==


# [[File:Yt.png]] [https://www.youtube.com/watch?v=3KwJ6OgOx14 Session 4 - Advanced Slicing and Printing: Multiple STLs with Multiple Heads]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=3KwJ6OgOx14 Session 4 - Advanced Slicing and Printing: Multiple STLs with Multiple Heads]


== '''Troubleshooting, Maintenance and Tuning''' ==


# [[File:Yt.png]] Establishing Connectivity between PC and Printer: https://www.youtube.com/watch?v=RlJqdhtpB6Q
 
# [[File:Yt.png]] Table Arm Block Adjustment for bed twist about the X or Y axes: https://www.youtube.com/watch?v=ImMo3V1D70w
<span style="color: maroon;">''Please refer to the videos below for instructions on Troubleshooting, Maintaining, and Tuning your Printer.''</span>
# [[File:Yt.png]] Replacing the Heated Build Platform: https://www.youtube.com/watch?v=FkJT3ILlAHw
 
# [[File:Yt.png]] NEW Tramming the heated build platform and setting Z-Zero: https://www.youtube.com/watch?v=lK_x0M8p9Ew
 
# [[File:Yt.png]] Updating Slic3r Settings: https://www.youtube.com/watch?v=A0I6Xu9Tlvc
== '''Other Accessory Overviews''' ==
# [[File:Yt.png]] Multi-Head Calibration Guide: https://www.youtube.com/watch?v=IQscrgv6uaQ
 
# [[File:Yt.png]] To replace your Tablet Interface Board; also to run from an external PC (start at 6:24): https://www.youtube.com/watch?v=b583I7AlGJI
* [[File:Yt.png]] [https://www.youtube.com/watch?v=Tz6mRSkOaSk Overview of the LA5-808 and LA6-450 Lasers]
# [[File:Yt.png]] Adjusting the X-Arm: https://www.youtube.com/watch?v=0gFX6Mh-ths
 
# [[File:Yt.png]] Tightening the X Belt: https://www.youtube.com/watch?v=4GYWfMrs0F8
 
# [[File:Yt.png]] Adjusting the Y-Arm: https://www.youtube.com/watch?v=LZd0ecogGlQ
 
# [[File:Yt.png]] Tightening the Y Belt: https://www.youtube.com/watch?v=IkgviAGep-c
== '''Troubleshooting, Maintaining, and Tuning''' ==
# [[File:Yt.png]] Replacing your Power Supply https://www.youtube.com/watch?v=Zl1sqy6PWx8
 
# [[File:Yt.png]] Replacing the heated build platform: https://www.youtube.com/watch?v=ed8ZqZLsTJ8
''[[Videos | List of ALL Videos]]
# [[File:Yt.png]] Replacing the 4A fuses (1206 package) on the yoke: https://www.youtube.com/watch?v=EosKDe-SyUI
 
# [[File:Yt.png]] Updating the 103 HotHead / HotBed Controllers: https://www.youtube.com/watch?v=yM8QMZBTb4o
=== General ===
# [[File:Yt.png]] Replacing the 103 HotHead Controller: https://www.youtube.com/watch?v=XKCEkKSolZc
 
# [[File:Yt.png]] Updating the 407 Motion Controller: https://www.youtube.com/watch?v=cFAFRkpLmww
# [[File:Yt.png]] [https://www.youtube.com/watch?v=RlJqdhtpB6Q Establishing Connectivity between PC and Printer]
# [[File:Yt.png]] Changing the Print Head PCB: https://www.youtube.com/watch?v=XKCEkKSolZc
# [[File:Yt.png]] [https://www.youtube.com/watch?v=A0I6Xu9Tlvc Updating Slic3r Settings]
# [[File:Yt.png]] Changing the Main I/O Board: https://www.youtube.com/watch?v=66S9XJ-KeU8
# [[File:Yt.png]] [https://www.youtube.com/watch?v=XKCEkKSolZc Replacing the 103 HotHead Controller]
# [[File:Yt.png]] Configuring the USB-B to run from another coputer: https://www.youtube.com/watch?v=uPqr4S0WC3Q
# [[File:Yt.png]] [https://www.youtube.com/watch?v=yM8QMZBTb4o Updating the 103 HotHead / HotBed Controllers]
# [[File:Yt.png]] Assembling the new PEEK Fan Nozzle: https://www.youtube.com/watch?v=ysO8oAzFwC4
# [[File:Yt.png]] [https://www.youtube.com/watch?v=cFAFRkpLmww Updating the 407 Motion Controller]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=ysO8oAzFwC4v Assembling the new PEEK Fan Nozzle on the MK1-250 and MK2-250]
 
=== Hydra Models ===
 
==== Configuration ====
 
# [[File:Yt.png]] [https://youtu.be/FnYDoNkgOrI Converting from Printer to CO2 Laser]
 
==== Adjustments ====
 
# [[File:Yt.png]] [https://www.youtube.com/watch?v=pPtGSwyS140 Hydra Home Calibration Details]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=Az7V1FSRJfs Adjusting X and Y Belt Tension]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=zEsnegXhpLw Adjusting Z Belt Tension]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=SyMB5063J5E Adjusting Linear Bearings]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=GCzPw4FOG8c Draining Laser Coolant]
 
=== System 30M and Engine (SR) Models ===
 
==== Adjustments ====
 
# [[File:Yt.png]] [https://www.youtube.com/watch?v=0gFX6Mh-ths Adjusting the X-Arm]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=4GYWfMrs0F8 Tightening the X Belt]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=LZd0ecogGlQ Adjusting the Y-Arm]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=IkgviAGep-c Tightening the Y Belt]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=ImMo3V1D70w Adjusting the Table Arm Block]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=lK_x0M8p9Ew Tramming the heated build platform and setting Z-Zero]
 
==== Replacements ====
 
# [[File:Yt.png]] [https://www.youtube.com/watch?v=Zl1sqy6PWx8 Replacing the Power Supply]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=FkJT3ILlAHw Replacing the Heated Build Platform]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=EosKDe-SyUI Replacing the (old) 4A fuses (1206 package) on the Yoke]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=XKCEkKSolZc Replacing the Print Head PCB]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=66S9XJ-KeU8 Replacing the Main I/O (Spine) Board]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=b583I7AlGJI Replacing the Tablet Interface Board]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=b583I7AlGJI&t=6m24s Running from an External PC (start at 6:24)]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=D2sWEYRVAII Replacing the LED Strips]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=14ynZ3DHzVg Replacing the Front Switch Panel]
 
== '''YouTube Directories''' ==
 
# [[File:Yt.png]] The Hyrel YouTube Channel: https://www.youtube.com/channel/UCT-48K-0Y4xoTvbJCjyDFXA/videos
# [[File:Yt.png]] Karl Gifford's YouTube Channel: https://www.youtube.com/user/karl0gifford/videos?sort=dd&shelf_id=0&view=0

Latest revision as of 02:20, 1 March 2023

Here are some step by step instructions for learning how to use your Hyrel 3D Printer.

Before You Get Started

ALL printer models:

  1. Yt.png Motor Setup

Unboxing and Initial Setup: 30M Models

  1. PDF: Quick Start Instructions
  2. Yt.png System 30M Unboxing
  3. Yt.png System 30M Initial Setup

Unboxing and Initial Setup: ESR Models

  1. PDF: Quick Start Instructions
  2. Yt.png Plugging in Motor Cables
  3. Yt.png ESR Unboxing and Initial Setup

Unboxing and Initial Setup: Hydra Models

  1. Yt.png Plugging in Motor Cables
  2. Yt.png Hydra 21 Model Unboxing
  3. Yt.png Hydra 21 Bed Leveling

Older videos below still generally apply:

  1. Yt.png Hydra Model Startup
  2. Yt.png Hydra Home Calibration Details
  3. Yt.png Hydra Model Controls Overview

Unboxing and Initial Setup: Engine HR (High Resolution)

  1. Yt.png Plugging in Motor Cables
  2. Yt.png Unboxing and Set Up of the EHR
  3. Yt.png How the Engine HR is Set Up, Part 1
  4. Yt.png How the Engine HR is Set Up, Part 2
  5. Yt.png Setting the Z-Zero on the EHR, older
GCODE to establish sensor-based home in Z and in X/Y:
G28 Z0 ; home Z
G28 X0 Y0 ; home X/Y
GCODE to insert BEFORE first move, assuming 28.2 as your calculated Z-Zero above absolute Zero:
M660 H2 Z28.2 ; set tool height for tool two (Z offset)
GCODE to insert ON first move, 
Before: G1 Z0.275 F360 ; move to next layer (0)
After:  G1 Z0.275 F360 H2 ; move to next layer (0) and invoke head Z offset for this tool

Please complete the steps above for your model of printer before printing.

BASIC Printing: One STL, One Head

First Training Session

Overview, Tramming, Printing with Reservoirs

  1. PDF: First Training Session
  2. Yt.png Session 1A: Hardware and Software Overview Video
  3. Yt.png Session 1B: Communications and Tramming Video
  4. Yt.png Session 1C: Setting Z-Zero and Emulsifiable Print Video

Additional Emulsifiable Videos

  1. Yt.png EMO Series Printing Tips
  2. Overview of Reservoir-based Print Heads:
    1. Yt.png Overview of the EMO Heads
    2. Yt.png Overview of the SDSHeads
    3. Yt.png Overview of the VOL Heads
    4. Yt.png Overview of the KR2 Heads
    5. Yt.png Overview of the SMH-2 Head
  3. Loading Reservoir-based Print Heads:
    1. Yt.png Loading the EMO-25
    2. Yt.png More Loading the EMO-25
    3. Yt.png Loading the VCD Head
    4. Yt.png Loading the SDS Head
    5. Yt.png Loading the SDS Head with RTV
    6. Yt.png Loading and Printing with the EMO-25

Second Training Session

CAD Modeling, Positioning, and Printing with Filaments

  1. PDF: Second Training Session
  2. Yt.png Session 2A: Simple CAD Modeling in FreeCAD Video
  3. Yt.png Session 2B: Healing an STL in MeshLab Video
  4. Yt.png Session 2C: Positioning, Scaling, and Rotating your STL Video
  5. Yt.png Session 2D: Editing Slic3r Recipes Video
  6. Yt.png Session 2E: Slicing your STL and Viewing your GCODE Video
  7. Yt.png Session 2F: Loading and Printing with Filaments Video

Additional Filament Videos

  1. General MK Series:
    1. Yt.png MK Series Printing Tips
    2. Yt.png Post Processing with a Heat Gun
    3. Yt.png Loading and Unloading Filament in the MK Series head
  2. MK1-250 Extruder for Standard Filaments:
    1. Yt.png Overview
    2. Yt.png Loading and Printing
  3. MK2-250 Extruder for Flexible Filaments:
    1. Yt.png Overview
    2. Yt.png Loading and Printing
  4. MK1-450 Extruder for High-Temperature Filaments:
    1. Yt.png Overview
    2. Yt.png Loading and Printing

Additional Basic Printing Instructions

  1. PDF: BASIC Printing Instructions
  2. Yt.png HotHead/HotBed 103 Controller Board LEDs Explained
  3. Yt.png Tramming your Bed: Systems and Engines, 2015 and later
  4. Yt.png Tramming your Bed: Earlier Systems and Engines


Please become skilled at BASIC Printing before moving to INTERMEDIATE Printing.

INTERMEDIATE Printing: One STL, Multiple Heads

  1. PDF: Intermediate Printing Instructions
  2. Yt.png Session 3A - Setting Two Heads to Z-Zero
    1. Yt.png Session 3A - Alternate Version
  3. Yt.png Session 3B - Calibrating the Offset Between Two Heads
    1. PhoneBuddy App for using your smartphone to calibrate offests
    2. GCODE: Calibration Target
  4. Yt.png Session 3C - Slicing and Printing with Second Head Support
  5. Yt.png Session 3D - Clone or Parallel Printing


Please become skilled at INTERMEDIATE Printing before moving to ADVANCED Printing.

ADVANCED Printing: Multiple STLs, Multiple Heads

  1. Yt.png Session 4 - Advanced Slicing and Printing: Multiple STLs with Multiple Heads


Please refer to the videos below for instructions on Troubleshooting, Maintaining, and Tuning your Printer.


Other Accessory Overviews


Troubleshooting, Maintaining, and Tuning

List of ALL Videos

General

  1. Yt.png Establishing Connectivity between PC and Printer
  2. Yt.png Updating Slic3r Settings
  3. Yt.png Replacing the 103 HotHead Controller
  4. Yt.png Updating the 103 HotHead / HotBed Controllers
  5. Yt.png Updating the 407 Motion Controller
  6. Yt.png Assembling the new PEEK Fan Nozzle on the MK1-250 and MK2-250

Hydra Models

Configuration

  1. Yt.png Converting from Printer to CO2 Laser

Adjustments

  1. Yt.png Hydra Home Calibration Details
  2. Yt.png Adjusting X and Y Belt Tension
  3. Yt.png Adjusting Z Belt Tension
  4. Yt.png Adjusting Linear Bearings
  5. Yt.png Draining Laser Coolant

System 30M and Engine (SR) Models

Adjustments

  1. Yt.png Adjusting the X-Arm
  2. Yt.png Tightening the X Belt
  3. Yt.png Adjusting the Y-Arm
  4. Yt.png Tightening the Y Belt
  5. Yt.png Adjusting the Table Arm Block
  6. Yt.png Tramming the heated build platform and setting Z-Zero

Replacements

  1. Yt.png Replacing the Power Supply
  2. Yt.png Replacing the Heated Build Platform
  3. Yt.png Replacing the (old) 4A fuses (1206 package) on the Yoke
  4. Yt.png Replacing the Print Head PCB
  5. Yt.png Replacing the Main I/O (Spine) Board
  6. Yt.png Replacing the Tablet Interface Board
  7. Yt.png Running from an External PC (start at 6:24)
  8. Yt.png Replacing the LED Strips
  9. Yt.png Replacing the Front Switch Panel

YouTube Directories

  1. Yt.png The Hyrel YouTube Channel: https://www.youtube.com/channel/UCT-48K-0Y4xoTvbJCjyDFXA/videos
  2. Yt.png Karl Gifford's YouTube Channel: https://www.youtube.com/user/karl0gifford/videos?sort=dd&shelf_id=0&view=0