Difference between revisions of "Videos"

From Hyrel3D
Jump to navigation Jump to search
 
(221 intermediate revisions by 2 users not shown)
Line 6: Line 6:
== Table of Videos ==
== Table of Videos ==


Please also see the [[Instructions]] page and the [[Help]] page.
Please also see:
 
* The '''[[Instructions]]''' page  
* The '''[[Help]]''' page
* The '''[[FAQs]]''' page
* The '''[[How_do_I...]]''' page


Remember, you can CTRL+F to search for a keyword on this page! You can also click on a column header to sort by that column.
Remember, you can CTRL+F to search for a keyword on this page! You can also click on a column header to sort by that column.
Note:
The following chart compares and contrasts the various printers:
https://hyrel3d.com/wiki/index.php/Printer_Overview


The following chart compares and contrasts the various heads:
The following chart compares and contrasts the various heads:
https://hyrel3d.com/wiki/index.php/Head_Overview
=== Count ===
299 videos as of June 2024.
{| border="1" class="wikitable sortable" style="text-align: center"
|+ Table of Video Links, 2024
! Video Link
! Subject
! Printer Model
! Head / Activity
|-
{| border="1" class="wikitable sortable" style="text-align: center"
|+ Table of Video Links, 2024
! Video Link
! Subject
! Printer Model
! Head / Activity
|-
! [[File:1vCTKK65RPQ.jpg|200px|link=https://www.youtube.com/watch?v=1vCTKK65RPQ]]
| Setting up the Hyrel 3D H21 to print PEI (Ultem) in the Heated Chamber (up to 150C)
| H21
| FH2-450
|-
! [[File:uI7UeOIduAEx.jpg|200px|link=https://www.youtube.com/watch?v=uI7UeOIduAE]]
| Hyrel 3D H21 Heated Chamber (up to 150C) Instructions
| H21
| FH2-450
|-
! [[File:WH6H3DnNjJk.jpg|200px|link=https://www.youtube.com/watch?v=wH6H3DnNjJk]]
| Tuskegee University prints on Hydra 21
| H21
| FH2-260
|-
! [[File:AHROiw0INxo.jpg|200px|link=https://www.youtube.com/watch?v=AHROiw0INxo]]
| Surface Mapping Configuration on Hyrel 3D Software
| H21
| Probe
|-
! [[File:1gtfdQCLGacQ.png|200px|link=https://www.youtube.com/watch?v=gtfdQCLGacQ]]
| Slicing a DXF to etch with a Hyrel 3D Diode Laser
| Any
| Lasers
|-
! [[File:1y5nrlOKWK6M.png|200px|link=https://www.youtube.com/watch?v=y5nrlOKWK6M]]
| Hyrel3D: HEATED Small Volume Mixing Kit (SVMK) setup
| Any
| Reservoir
|-
! [[File:PsaduGKoLJw.png|200px|link=https://www.youtube.com/watch?v=PsaduGKoLJw]]
| Hyrel 3D: Dual RSD instructions
| Any
| Reservoir
|-
|}
279 videos as of Oct 2022
=== 2023 (1) ===
{| border="1" class="wikitable sortable" style="text-align: center"
|+ Table of Video Links, 2021
! Video Link
! Subject
! Printer Model
! Head / Activity
|-
! [[File:6inSx0kMIEk.png|200px|link=https://www.youtube.com/watch?v=6inSx0kMIEk]]
| New-style Pick-and-Place Head Introduction
| H21
| PNP
|-
|}
=== 2022 (23) ===
{| border="1" class="wikitable sortable" style="text-align: center"
|+ Table of Video Links, 2021
! Video Link
! Subject
! Printer Model
! Head / Activity
|-
! [[File:1sKF45LSvIU.png|200px|link=https://www.youtube.com/watch?v=1sKF45LSvIU]]
| Hyrel3D Bioprinting at the Food and Bioengineering Lab of TalTech, Estonia
| EHR
| Printing
|-
! [[File:T2R3cuBm0S8.png|200px|link=https://www.youtube.com/watch?v=T2R3cuBm0S8]]
| Additional Setup for new printers
| All
| n/a
|-
! [[File:SaCESWMzTzU.png|200px|link=https://www.youtube.com/watch?v=saCESWMzTzU]]
| Technical University of Denmark printing on a Hyrel 3D Printer
| ESR
| Printing
|-
! [[File:Mprt_AHMJrQ.png|200px|link=https://www.youtube.com/watch?v=Mprt_AHMJrQ]]
| Creating Text Objects with Repetrel
| All
| n/a
|-
! [[File:T0Sjq4gWLs0.png|200px|link=https://www.youtube.com/watch?v=t0Sjq4gWLs0]]
| New Small Volume Mixing Kit
| Any
| SVMK, Microfluidics
|-
! [[File:FvAWmbVkBxE.png|200px|link=https://www.youtube.com/watch?v=FvAWmbVkBxE]]
| Integrating MATLAB with Repetrel
| Any
| Any
|-
! [[File:6PqZkRNnbuI.png|200px|link=https://www.youtube.com/watch?v=6PqZkRNnbuI]]
| Adjusting to avoid Elephant Foot with PCL and similar materials
| Any
| KR2, TAM
|-
! [[File:8oTzRYFHFy0.png|200px|link=https://www.youtube.com/watch?v=8oTzRYFHFy0]]
| Hyrel head lowering attachment
| Any
| Any
|-
! [[File:RMVCPDqZamI.png|200px|link=https://www.youtube.com/watch?v=rMVCPDqZamI]]
| Cleaning residue from the HIgh Torque KR2 cartridge
| Any
| HTK
|-
! [[File:ZcLTrAIVWh8.png|200px|link=https://www.youtube.com/watch?v=zcLTrAIVWh8]]
| Scaling your print with the Hyrel Microscope
| Any
| Microscope
|-
! [[File:HSUTLFg41cI.png|200px|link=https://www.youtube.com/watch?v=rMVCPDqZamI]]
| Cleaning PCL, PLA, or PDO residue the Hyrel HTK cartridge of the KR2 head.
| Any
| Cleanup
|-
! [[File:M9WznRpnLY8.png|200px|link=https://www.youtube.com/watch?v=M9WznRpnLY8]]
| Using head offsets to change tool positions while leaving the output in the same location
| Any
| Calibration
|-
! [[File:CM9AwdiZQ2M.png|200px|link=https://www.youtube.com/watch?v=cM9AwdiZQ2M]]
| Demo setup and test: Pick-and-Place
| H21
| Configuration
|-
! [[File:N1HVzUgp5hU.png|200px|link=https://www.youtube.com/watch?v=N1HVzUgp5hU]]
| EHR Position Adjustment
| EHR
| Calibration
|-
! [[File:PRvXvj02wdU.png|200px|link=https://www.youtube.com/watch?v=pRvXvj02wdU]]
| Analyzing and calculating the porosity of scaffolds - Hyrel 3D
| Any
| Scaffolds
|-
! [[File:CoPUoa5knws.png|200px|link=https://www.youtube.com/watch?v=CoPUoa5knws]]
| Replacing big tree board on Z motor on Hydra 21.
| H21
| Maintenance
|-
! [[File:ZcsDLxkzio8.png|200px|link=https://www.youtube.com/watch?v=zcsDLxkzio8]]
|  How to prepare powdered material for use in Hyrel 3D's heated syringe heads.
| All
| Bio
|-
! [[File:NQn0MgFGswE.png|200px|link=https://www.youtube.com/watch?v=NQn0MgFGswE]]
| How to level the build platform on the new Hyrel 3D Hydra 21 printer.
| H21
| Maintenance
|-
! [[File:R5NerkHj1aY.png|200px|link=https://www.youtube.com/watch?v=R5NerkHj1aY]]
| How to measure the scale of biological scaffold prints.
| All
| Bio
|-
! [[File:KPSnNNQ3Mao.png|200px|link=https://www.youtube.com/watch?v=KPSnNNQ3Mao]]
| How to melt and print with PCL pellets with the Hyrel KR2 head.
| All
| Bio
|-
! [[File:0uU5M8bwkDU.png|200px|link=https://www.youtube.com/watch?v=0uU5M8bwkDU]]
| How to remove PCL scaffolds from PVC build surface.
| All
| Bio
|-
! [[File:FTPT0TiFSJw.png|200px|link=https://www.youtube.com/watch?v=FTPT0TiFSJw]]
| Hydra 21 Unboxing Instructions
| H21
| All
|-
! [[File:FB4Sy0HFy8.png|200px|link=https://www.youtube.com/watch?v=_fB4Sy0HFy8]]
| Cirles, Arcs, Spirals, and Helixes: Hyrel's G2 and G3 gcode generation tool
| All
| All
|-
|}
=== 2021 (44) ===
{| border="1" class="wikitable sortable" style="text-align: center"
|+ Table of Video Links, 2020
! Video Link
! Subject
! Printer Model
! Head / Activity
|-
! [[File:Ah_UguF8cNg.png|200px|link=https://www.youtube.com/watch?v=ah_UguF8cNg]]
| Scaffolds: Adjusting the flow value (P/uL)
| All
| All
|-
! [[File:CT-4Sk2DBMw.png|200px|link=https://www.youtube.com/watch?v=cT-4Sk2DBMw]]
| Scaffolds: Adjusting the final retract (unprime)
| All
| All
|-
! [[File:MbLeyEoBXek.png|200px|link=https://www.youtube.com/watch?v=mbLeyEoBXek]]
| Scaffold Gradient: Speed and Z position Instructions
| All
| All
|-
! [[File:AcVa5mrdjFQ.png|200px|link=https://www.youtube.com/watch?v=AcVa5mrdjFQ]]
| Scaffold Gradient: Speed Instructions
| All
| All
|-
! [[File:VBAFH6J5-to.png|200px|link=https://www.youtube.com/watch?v=vBAFH6J5-to]]
| Scaffold Perimeters Tool
| All
| All
|-
! [[File:HT0i3EP4HBM.png|200px|link=https://www.youtube.com/watch?v=hT0i3EP4HBM]]
| Customizing Visualization in Repetrel
| All
| All
|-
! [[File:Be-4iCfWM8s.png|200px|link=https://www.youtube.com/watch?v=be-4iCfWM8s]]
| Biogel Scaffold Speed Test
| All
| All
|-
! [[File:CEW_RQqCDPM.png|200px|link=https://www.youtube.com/watch?v=cEW_RQqCDPM]]
| Programming BigTree Drivers for Hyrel Printers
| All
| Flashing
|-
! [[File:P0G0uKOokJ8.png|200px|link=https://www.youtube.com/watch?v=p0G0uKOokJ8]]
| Using a USB Camera with Repetrel
| All
| Camera
|-
! [[File:mqdefault_6s (1)-1.jpg|200px|link=https://www.youtube.com/watch?v=mqdefault_6s (1)-1]]
| Heated Nozzle Accessory
| All
| Reservoirs
|-
! [[File:Onnl10Ea1tQ.png|200px|link=https://www.youtube.com/watch?v=Onnl10Ea1tQ]]
| Scaffold Options in Repetrel
| All
| All
|-
! [[File:QnvzDbYEFfA.png|200px|link=https://www.youtube.com/watch?v=qnvzDbYEFfA]]
| Cleaning the Hyrel 3D DMH-2 Dynamic Mixing Head
| All
| Reservoir
|-
! [[File:3KLIdStlvwU.png|200px|link=https://www.youtube.com/watch?v=3KLIdStlvwU]]
| Calibrating Head Offsets for Hyrel 3D
| All
| All
|-
! [[File:BZBItYywCjM.png|200px|link=https://www.youtube.com/watch?v=bZBItYywCjM]]
| Hyrel 3D "Return Trip" Option for Scaffolds
| All
| Zebra Prints
|-
! [[File:TKa3gzb18qk.png|200px|link=https://www.youtube.com/watch?v=tKa3gzb18qk]]
| Hyrel 3D Viscosity Test Clean Up
| All
| Reservoir
|-
! [[File:mqdefault_6s (1)-1.jpg|200px|link=https://www.youtube.com/watch?v=mqdefault_6s]]
| Hyrel 3D's Coaxial Extrusion Head with Nozzle Heater
| All
| Reservoir
|-
! [[File:P28Y7NNT3DQ.png|200px|link=https://www.youtube.com/watch?v=P28Y7NNT3DQ]]
| Configuring "Zebra" prints in Repetrel on Hyrel 3D Printers
| All
| Zebra Prints
|-
! [[File:DX1fBX51XNI.png|200px|link=https://www.youtube.com/watch?v=dX1fBX51XNI]]
| Designing Scaffolds in Repetrel
| All
| Scaffolds
|-
! [[File:St6nehNLTdc.png|200px|link=https://www.youtube.com/watch?v=St6nehNLTdc]]
| Resolving a stuck plunger in a Hyrel 3D reservoir head
| All
| Reservoir
|-
! [[File:AtQuLaYVGzA.png|200px|link=https://www.youtube.com/watch?v=AtQuLaYVGzA]]
| Hyrel 3D Announces Polar Printing for Extreme Environments!
| Polar
| All
|-
! [[File:ADqB1DjM9Ug.png|200px|link=https://www.youtube.com/watch?v=aDqB1DjM9Ug]]
| Eliminating air bubbles in a Hydrogel
| All
| Reservoir
|-
! [[File:MbyRncFmpyg.png|200px|link=https://www.youtube.com/watch?v=MbyRncFmpyg]]
| Cleaning Hyrel 3D's DMH-2 Dynamic Mixing Head
| All
| DMH-2
|-
! [[File:JvenAK33OmI.png|200px|link=https://www.youtube.com/watch?v=JvenAK33OmI]]
| How to echo gcode commands to the display
| All
| Usage
|-
! [[File:Hd4iq3HR9c8.png|200px|link=https://www.youtube.com/watch?v=Hd4iq3HR9c8]]
| Removing PCL Prints Faster and Easier
| All
| PCL
|-
! [[File:Hcxd5uonkxE.png|200px|link=https://www.youtube.com/watch?v=hcxd5uonkxE]]
| Overview of the Hyrel 3D "Quiet Storm" Additional Cooling Fan
| All
| Quiet Storm
|-
! [[File:V5cKuYY1PAw.png|200px|link=https://www.youtube.com/watch?v=V5cKuYY1PAw]]
| Preparation and Setup for Printing PCL (polycaprolactone)
| All
| PCL
|-
! [[File:7ozTI_eiFqk.png|200px|link=https://www.youtube.com/watch?v=7ozTI_eiFqk]]
| Choosing and Specifying Parameters for Rectangular Infill Scaffolds
| All
| Scaffolds
|-
! [[File:Dfm8RYyzmas.png|200px|link=https://www.youtube.com/watch?v=dfm8RYyzmas]]
| Choosing and Specifying Parameters for Gyroid Infill PCL Scaffolds
| All
| Scaffolds
|-
! [[File:ASy9HIwz04Q.png|200px|link=https://www.youtube.com/watch?v=aSy9HIwz04Q]]
| Showing the Effects of Cooling while Printing
| All
| Cooling
|-
! [[File:A4bXqRb5-q8.png|200px|link=https://www.youtube.com/watch?v=A4bXqRb5-q8]]
| How to manage Accessory Manuals in Repetrel
| All
| Usage
|-
! [[File:EXMxgF-Yf1o.png|200px|link=https://www.youtube.com/watch?v=eXMxgF-Yf1o]]
| Saving, Naming and Reusing Scaffolds
| All
| Scaffolds
|-
! [[File:3H-gJNUDncA.png|200px|link=https://www.youtube.com/watch?v=3H-gJNUDncA]]
| How to work with our Heated Nozzle Accessory
| All
| Heated Nozzles
|-
! [[File:DXjh36CcRAw.png|200px|link=https://www.youtube.com/watch?v=DXjh36CcRAw]]
| Using Filters to refine SurferBuddy search results
| All
| SurferBuddy
|-
! [[File:JQCcelqLoQE.png|200px|link=https://www.youtube.com/watch?v=jQCcelqLoQE]]
| How to Export SurferBuddy Files to External Drive 1
| All
| SurferBuddy
|-
! [[File:EqoyARWTTLo.png|200px|link=https://www.youtube.com/watch?v=EqoyARWTTLo]]
| Using Parameter Profiles in Repetrel
| All
| Parameter Profiles
|-
! [[File:NbfntNBKSIg.png|200px|link=https://www.youtube.com/watch?v=NbfntNBKSIg]]
| How to Export GCODE from Repetrel
| All
| Usage
|-
! [[File:5lYDLhbnQxE.png|200px|link=https://www.youtube.com/watch?v=5lYDLhbnQxE]]
| Using offsets to repeat a job in different locations
| All
| Offsets
|-
! [[File:3tRDj7y54SU.png|200px|link=https://www.youtube.com/watch?v=3tRDj7y54SU]]
| Custom screeding attachment for the Hyrel Hydra
| 16A
| Calibration
|-
! [[File:JljdH1V4ips.jpg|200px|link=https://www.youtube.com/watch?v=jljdH1V4ips]]
| Hyrel Nozzle Heater for Reservoir Heads
| All
| Reservoir
|-
! [[File:Qqh2Y0Wg9HA.png|200px|link=https://www.youtube.com/watch?v=qqh2Y0Wg9HA]]
| Unboxing the Hyrel EHR for electro-spinning or melt-electro-writing (MEW)
| EHR
| Setup
|-
! [[File:Calibrate.png|200px|link=https://www.youtube.com/watch?v=93fE6I8L_Z0]]
| Calibrating Travel on the EHR
| EHR
| Calibration
|-
! [[File:Unpack.png|200px|link=https://www.youtube.com/watch?v=BZjoNhQcYb8]]
| Unpacking and Setting Up the EHR
| EHR
| Setup
|-
! [[File:VjZlZkBt130.png|200px|link=https://www.youtube.com/watch?v=vjZlZkBt130]]
| How to check if your CO2 Laser is working
| Hydra
| Lasers
|-
! [[File:SDqVHXZxrBI.png|200px|link=https://www.youtube.com/watch?v=sDqVHXZxrBI]]
| Etching Aluminum with 450 nm Diode Laser
| any
| Lasers
|-
! [[File:9BKE469eL0M.png|200px|link=https://www.youtube.com/watch?v=9BKE469eL0M]]
| Heated and Chilled Vacuum Bed (HCVB)
| EHR, 16A
| Reservoir
|-
|}
=== 2020 (30) ===
{| border="1" class="wikitable sortable" style="text-align: center"
|+ Table of Video Links, 2020
! Video Link
! Subject
! Printer Model
! Head / Activity
|-
! [[File:NW-O76oAlu4.png|200px|link=https://www.youtube.com/watch?v=NW-O76oAlu4]]
| The Hyrel Hydra Electrical Panel, Explained
| 16A
| Overview
|-
|-
! [[File:SF7UoogD-mg.png|200px|link=https://www.youtube.com/watch?v=SF7UoogD-mg]]
| Making DXFs from Camera Images
| All
| Lasers
|-
! [[File:Vipro.png|200px|https://www.youtube.com/watch?v=_Mr7qEBgu8M]]
| Viscotec Vipro HEAD-3 on Hyrel
| All
| Viscotec
|-
! [[File:LajxuYqTw6o.png|200px|link=https://www.youtube.com/watch?v=IajxuYqTw6o]]
| Explaining the NEW RSD-30
| All
| Reservoirs
|-
! [[File:IbdUwZyZm3I.png|200px| link=https://www.youtube.com/watch?v=IbdUwZyZm3I]]
| Making DXFs from CAD Models
| All
| Lasers
|-
! [[File:1Rtktf-HeTU.png|200px| link=https://www.youtube.com/watch?v=1Rtktf-HeTU]]
| 4th/5th Axis Installation and Setup
| 16A
| All
|-
! [[File:H8XnGKBEJCc.png|200px| link=https://www.youtube.com/watch?v=H8XnGKBEJCc]]
| 3-Phase Spindle Tool Installation and Setup
| 16A
| Spindles
|-
! [[File:JW1-uhvZ5wM.png|200px| link=https://www.youtube.com/watch?v=JW1-uhvZ5wM]]
| Clench/Pinch Valve Installation and Setup
| All
| Reservoirs
|-
! [[File:X7J4pTeSq8A.png|200px| link=https://www.youtube.com/watch?v=X7J4pTeSq8A]]
| Dynamic Mixing Head (DMH) Installation and Setup
| All
| Reservoirs
|-
! [[File:Dlta7KSt3bE.png|200px| link=https://www.youtube.com/watch?v=Dlta7KSt3bE]]
| EHR Electronics Access
| EHR
| Overview
|-
! [[File:H0pAYAraO0Q.png|200px| link=https://www.youtube.com/watch?v=WSwerPx93qA]]
| ESR Unboxing and Setup
| ESR
| Setup
|-
! [[File:DgfeoLZNW6c.png|200px| link=https://www.youtube.com/watch?v=dgfeoLZNW6c]]
| RSD-30 Refrigerated Syringe Dispenser
| All
| Reservoirs
|-
! [[File:ILEvP8p_JGo.png|200px| link=https://www.youtube.com/watch?v=ILEvP8p_JGo]]
| Printing on PEI
| All
| Filaments
|-
! [[File:7lwJvyBso1k.png|200px| link=https://www.youtube.com/watch?v=7lwJvyBso1k]]
| Printing Cememtitious Materials at TN Tech
| All
| Reservoirs
|-
! [[File:PX9KFUrSPVk.png|200px| link=https://www.youtube.com/watch?v=pX9KFUrSPVk]]
| Tightening set screws for Hydra X-axis
| 16A
| Maintenance
|-
! [[File:MOexKcvpcEY.png|200px| link=https://www.youtube.com/watch?v=mOexKcvpcEY]]
| Interview on GA Mfg News
| All
| All
|-
! [[File:R7UimNDjNiY.png|200px| link=https://www.youtube.com/watch?v=r7UimNDjNiY]]
| Hyrel V4 Install No. 9: Licensing
| All
| All
|-
! [[File:0CMH61RtSjk.png|200px| link=https://www.youtube.com/watch?v=0CMH61RtSjk]]
| Hyrel V4 Install No. 8: Recipes
| All
| All
|-
! [[File:N1HZOvWKqs8.png|200px| link=https://www.youtube.com/watch?v=N1HZOvWKqs8]]
| Hyrel V4 Install No. 7: Settings
| All
| All
|-
! [[File:9qbUzZM3vtg.png|200px| link=https://www.youtube.com/watch?v=9qbUzZM3vtg]]
| Hyrel V4 Install No. 6`: Firmware
| All
| All
|-
! [[File:-JN_0iLTOk4.png|200px| link=https://www.youtube.com/watch?v=-JN_0iLTOk4]]
| Hyrel V4 Install No. 5: Drivers
| All
| All
|-
! [[File:2BVzTR7ij5Y.png|200px| link=https://www.youtube.com/watch?v=2BVzTR7ij5Y]]
| Hyrel V4 Install No. 4: Repetrel
| All
| All
|-
! [[File:-Dp-4_NdYm8.png|200px| link=https://www.youtube.com/watch?v=-Dp-4_NdYm8]]
| Hyrel V4 Install No. 3: Adobe Reader
| All
| All
|-
! [[File:VH3Fv6jkA54.png|200px| link=https://www.youtube.com/watch?v=VH3Fv6jkA54]]
| Hyrel V4 Install No. 2: Ecosystem Apps
| All
| All
|-
! [[File:OpM-RcDuM5c.png|200px| link=https://www.youtube.com/watch?v=OpM-RcDuM5c]]
| Hyrel V4 Install No. 1: Winrar
| All
| All
|-
! [[File:MdNsQnHy4dQ.png|200px| link=https://www.youtube.com/watch?v=MdNsQnHy4dQ]]
| Hydra 16AT - Tall
| 16A
| All
|-
! [[File:Zh-x9ugJ5nE.png|200px| link=https://www.youtube.com/watch?v=zh-x9ugJ5nE]]
| Hyrel Bulk Feeder for Cementitious Materials
| 16A
| Reservoirs
|-
! [[File:RW7h9z5DW5A.png|200px| link=https://www.youtube.com/watch?v=rW7h9z5DW5A]]
| Using the new Precision Tool Setter on a Hyrel 3D Printer
| 16A
| All
|-
! [[File:E7tQN_63hcc.png|200px| link=https://www.youtube.com/watch?v=E7tQN_63hcc]]
| How to Dial In the Prime and Unprime Settings
| All
| All
|-
! [[File:TlnVUBryBg0.png|200px| link=https://www.youtube.com/watch?v=tlnVUBryBg0]]
| Installing a Second Yoke on a Hyrel Hydra
| 16A
| All
|-
|}
=== 2019 (21) ===


{| border="1" class="wikitable sortable" style="text-align: center"  
{| border="1" class="wikitable sortable" style="text-align: center"  
|+ Table of Video Links
|+ Table of Video Links, 2019
! style="width: 10%"|Thumbnail
! Video Link
! style="width: 10%"|Title
! Subject
! style="width: 10%"|Link
! Printer Model
! style="width: 10%"|Date
! Head / Activity
! style="width: 10%"|Model
|-
! style="width: 10%"|Category
! [[File:S3qw8dAWeNo.png|200px| link=https://www.youtube.com/watch?v=S3qw8dAWeNo]]
! style="width: 10%"|Activity
| RSD-30 - Refrigerated Syringe Dispenser
! style="width: 10%"|Material Type
| All
! style="width: 10%"|Other
| Reservoirs
|-
! [[File:RAkjF9nLy4M.png|200px| link=https://www.youtube.com/watch?v=rAkjF9nLy4M]]
| Heated & Chilled Vacuum Bed
| 16A, EHR
| Reservoirs
|-
! [[File:Gl3mbw88fmo.png|200px| link=https://www.youtube.com/watch?v=Gl3mbw88fmo]]
| 4th Axis Fun - Linear and Rotary Printing
| 16A
| All
|-
! [[File:VVhH8hc3olc.png|200px| link=https://www.youtube.com/watch?v=vVhH8hc3olc]]
| CO2 Laser - Installation Instructions
| 16A
| Lasers
|-
! [[File:SVC5W_DdQ9E.png|200px| link=https://www.youtube.com/watch?v=sVC5W_DdQ9E]]
| Dynamic Mixing Head DMH
| All
| Reservoirs
|-
! [[File:4oqPbfdD8O0.png|200px| link=https://www.youtube.com/watch?v=4oqPbfdD8O0]]
| Configuring Prusa Slicer for Multi-Material Support
| All
| Filaments
|-
! [[File:DDwGcDgOOQs.png|200px| link=https://www.youtube.com/watch?v=DDwGcDgOOQs]]
| Configuring the Prusa Slicer for Breakaway Support Material
| All
| Filaments
|-
! [[File:CW77WBv3x0Q.png|200px| link=https://www.youtube.com/watch?v=cW77WBv3x0Q]]
| How to Load Filament into a Hyrel 3D Print Head
| All
| Filaments
|-
! [[File:EMfkmXFuPd0.png|200px| link=https://www.youtube.com/watch?v=EMfkmXFuPd0]]
| Loading Print Heads into your Hyrel 3D Printer
| All
| All
|-
! [[File:XC1zLqYkKsc.png|200px| link=https://www.youtube.com/watch?v=xC1zLqYkKsc]]
| How to Calibrate the Z-Zero Position
| 16A, 30M, ESR
| All
|-
! [[File:0Apq3tlila8.png|200px| link=https://www.youtube.com/watch?v=0Apq3tlila8]]
| Revised 2019: Hyrel 30M Initial Setup
| 30M
| All
|-
! [[File:0MFtqhM6ZKM.png|200px| link=https://www.youtube.com/watch?v=0MFtqhM6ZKM]]
| How to select a Build Surface
| All
| Filaments
|-
|-
! [[File:-4LuhNfbMAo.png|200px| link=https://www.youtube.com/watch?v=-4LuhNfbMAo]]
| How to Tram (level) the Hydra Bed
| 16A
| All
|-
! [[File:C5-NYk06NVc.png|200px| link=https://www.youtube.com/watch?v=C5-NYk06NVc]]
| Laser Marking on a Cylinder
| All
| Lasers
|-
! [[File:PjqDXXPjI4w.png|200px| link=https://www.youtube.com/watch?v=PjqDXXPjI4w]]
| Five Axis Machining in Brass on a Hyrel Hydra
| 16A
| Spindle
|-
! [[File:KmkGR7u5D58.png|200px | link=https://www.youtube.com/watch?v=kmkGR7u5D58]]
| Configuring your Hydra for a 3-phase Spindle Tool
| 16A
| Spindle
|-
! [[File:B0lvN-aPYHI.png|200px| link=https://www.youtube.com/watch?v=B0lvN-aPYHI]]
| Five Axis Machining on a Hyrel Hydra  <br> [http://hyrel3d.net/downloads/gcode/Ardes_tube_cap_milling.gcode (this gcode was used)]
| 16A
| Spindle
|-
! [[File:CmBaHHAfbEo.png|200px| link=https://www.youtube.com/watch?v=CmBaHHAfbEo]]
| Dispensing RTV Silicone on a Hyrel Hydra
| All
| Reservoirs
|-
! [[File:G526vFi8yWI.png|200px| link=https://www.youtube.com/watch?v=G526vFi8yWI]]
| Machining PTFE (Teflon) on a Hyrel Hydra
| 16A
| Spindle
|-
! [[File:LfmssRdZwuE.jpg|200px| link=https://www.youtube.com/watch?v=LfmssRdZwuE]]
| Rotating Head Prototype
| 16A
| Filaments
|-
! [[File:YhoMTLGVAbc.png|200px| link=https://www.youtube.com/watch?v=yhoMTLGVAbc]]
| Re-aligning the Gantry on the Hyrel Hydra 16A
| 16A
| All
|-
|}
=== 2018 (12) ===


https://www.youtube.com/watch?v=lNURH2fRbY0


! [[File:lNURH2fRbY0.jpg|200px]]
{| border="1" class="wikitable sortable" style="text-align: center"
|+ Table of Video Links, 2018
! Video Link
! Subject
! Printer Model
! Head / Activity
|-
! [[File:CbxB96oZFGE.jpg|200px|link=https://www.youtube.com/watch?v=CbxB96oZFGE]]
| Installing the new laser Power Supply in a Hyrel Hydra
| 16A
| All
|-
! [[File:KrwOviaCZuw.jpg|200px|link=https://www.youtube.com/watch?v=krwOviaCZuw]]
| Hyrel Tapping Enabled
| 16A
| Spindle
|-
! [[File:QuIM9XSYMxE.jpg|200px|link=https://www.youtube.com/watch?v=QuIM9XSYMxE]]
| Light Duty Milling with 3-Phase Spindle on a Hyrel Hydra
| 16A
| Spindle
|-
! [[File:Ni56OFo1VvM.jpg|200px|link=https://www.youtube.com/watch?v=ni56OFo1VvM]]
| Improved UV Light Source for more Powerful Crosslinking
| All
| Reservoirs
|-
! [[File:68oktmbp8r0.png|200px|link=https://www.youtube.com/watch?v=68oktmbp8r0]]
| How to install 4th and 5th Axes on a Hyrel Hydra
| 16A
| All
|-
! [[File:7DcqbBzs-ZQ.png|200px|link=https://www.youtube.com/watch?v=7DcqbBzs-ZQ]]
| How to use an additional Yoke on a Hyrel Hydra
| 16A
| All
|-
! [[File:VerQRjS3iWE.png|200px|link=https://www.youtube.com/watch?v=VerQRjS3iWE]]
| How to install an additional Yoke on a Hyrel Hydra
| 16A
| All
|-
! [[File:jSTmzuuMYvc.png|200px|link=https://www.youtube.com/watch?v=jSTmzuuMYvc]]
| The Filament Dryer
| All
| Filaments
|-
! [[File:lNURH2fRbY0.jpg|200px|link=https://www.youtube.com/watch?v=lNURH2fRbY0]]
| Fourth and Fifth Axes Demo on a Hyrel Hydra
| Fourth and Fifth Axes Demo on a Hyrel Hydra
| https://www.youtube.com/watch?v=lNURH2fRbY0
| 16A
| 2018.04.19
| All
| Hydra
| Hardware
| 4th Axis
| 5th Axis
| n/a
|-
|-
! [[File:9R6OUMvb.jpg|200px]]
! [[File:9R6OUMvb.jpg|200px|link=https://www.youtube.com/watch?v=_9R6OUMvb-o]]
| Installing a fourth axis on a Hyrel Hydra
| Installing a fourth axis on a Hyrel Hydra
| https://www.youtube.com/watch?v=_9R6OUMvb-o
| 16A
| 2018.04.19
| All
| Hydra
| Hardware
| 4th Axis
| n/a
| n/a
|-
|-
! [[File:2QqwfsKgzuQ.jpg|200px]]
! [[File:2QqwfsKgzuQ.jpg|200px|link=https://youtu.be/2QqwfsKgzuQ]]
| Machining hotbeds to under 0.001"
| Machining hotbeds to under 0.001"
| https://youtu.be/2QqwfsKgzuQ
| 16A
| 2018.04.06
| All
| Hydra
| Hardware
| Hotbed
| n/a
| n/a
|-
|-
! [[File:O1xmXCdj1xE.png|200px]]
! [[File:O1xmXCdj1xE.png|200px|link=https://youtu.be/O1xmXCdj1xE]]
| Setting the Z-Offset on the EHR
| Setting the Z-Offset on the EHR
| https://youtu.be/O1xmXCdj1xE
| 2018.03.21
| EHR
| EHR
| Hardware
| All
| Z-Zero
|}
| n/a
 
| n/a
=== 2017 (45) ===
 
{| border="1" class="wikitable sortable" style="text-align: center"
|+ Table of Video Links, 2017
! Video Link
! Subject
! Printer Model
! Head / Activity
|-
|-
! [[File:KqnjlTSg-20.jpg|200px]]
! [[File:KqnjlTSg-20.jpg|200px| link=https://youtu.be/kqnjlTSg-20]]
| CO2 Laser Marking with the Hydra
| CO2 Laser Marking with the Hydra
| https://youtu.be/kqnjlTSg-20
| 16A
| 2017.11.07
| Lasers
| Hydra
| Hardware
| Laser
| n/a
| n/a
|-
|-
! [[File:FnYDoNkgOrI.jpg|200px]]
! [[File:FnYDoNkgOrI.jpg|200px| link=https://youtu.be/FnYDoNkgOrI]]
| Converting a Hydra from Printer to Laser
| Converting a Hydra from Printer to Laser
| https://youtu.be/FnYDoNkgOrI
| 16A
| 2017.11.07
| Lasers
| Hydra
| Hardware
| Laser
| n/a
| n/a
|-
|-
! [[File:FHqTlcdISIg.jpg|200px]]
! [[File:FHqTlcdISIg.jpg|200px| link=https://youtu.be/fHqTlcdISIg]]
| Cutting Nylon Mesh with CO2 Laser on a Hydra
| Cutting Nylon Mesh with CO2 Laser on a Hydra
| https://youtu.be/fHqTlcdISIg
| 16A
| 2017.11.07
| Lasers
| Hydra
| Hardware
| Laser
| n/a
| n/a
|-
|-
! [[File:NTejDT1B6uQ.jpg|200px]]
! [[File:NTejDT1B6uQ.jpg|200px| link=https://youtu.be/nTejDT1B6uQ]]
| Chamber Temperature in a Cold Room
| Chamber Temperature in a Cold Room
| https://youtu.be/nTejDT1B6uQ
| 16A
| 2017.11.07
| Filaments
| Hydra
| Hardware
| Heater
| n/a
| n/a
|-
|-
! [[File:4Y9V6RWhKj4.jpg|200px]]
! [[File:4Y9V6RWhKj4.jpg|200px| link=https://youtu.be/4Y9V6RWhKj4]]
| Cutting acrylic with the CO2 Laser
| Cutting acrylic with the CO2 Laser
| https://youtu.be/4Y9V6RWhKj4
| 16A
| 2017.11.07
| Lasers
| Hydra
| Hardware
| Application
| Acrylic
| n/a
|-
|-
! [[File:DkMtzPDtIQY.jpg|200px]]
! [[File:DkMtzPDtIQY.jpg|200px| link=https://youtu.be/dkMtzPDtIQY]]
| Tiny Heated Chilled Bed Preview
| Tiny Heated Chilled Bed Preview
| https://youtu.be/dkMtzPDtIQY
| EHR
| 2017.11.07
| Reservoirs
| EHR, Hydra
| Hardware
| Application
| Bioloicals
| n/a
|-
|-
! [[File:GdvyT8HoaOw.jpg|200px]]
! [[File:GdvyT8HoaOw.jpg|200px| link=https://youtu.be/gdvyT8HoaOw]]
| Fourth Axis Rotary Print
| Fourth Axis Rotary Print
| https://youtu.be/gdvyT8HoaOw
| 16A
| 2017.10.20
| Filaments
| Hydra
| Hardware
| Application
| ABS
| n/a
|-
|-
! [[File:3nKqwcXcEgY.png|200px]]
! [[File:3nKqwcXcEgY.png|200px| link=https://youtu.be/3nKqwcXcEgY]]
| Additive Manufacturing of Toroid Inductor for Electronics Applications
| Additive Manufacturing of Toroid Inductor for Electronics Applications
| https://youtu.be/3nKqwcXcEgY
| 30M, ESR
| 2017.10.02
| Reservoirs
| 30M
| Hardware
| Application
| Conductive, Magnetic
| Paste
|-
|-
! [[File:Az7V1FSRJfs.jpg|200px]]
! [[File:Az7V1FSRJfs.jpg|200px| link=https://www.youtube.com/watch?v=Az7V1FSRJfs]]
| Hyrel Hydra X and Y Belt Tension Adjustments
| Hyrel Hydra X and Y Belt Tension Adjustments
| https://www.youtube.com/watch?v=Az7V1FSRJfs
| 16A
| 2017.08.17
| Hydra
| Hardware
| Maintenance
| Maintenance
| n/a
| n/a
|-
|-
! [[File:SyMB5063J5E.jpg|200px]]
! [[File:SyMB5063J5E.jpg|200px| link=https://www.youtube.com/watch?v=SyMB5063J5E]]
| Hyrel Hydra Linear Bearing Adjustments  
| Hyrel Hydra Linear Bearing Adjustments  
| https://www.youtube.com/watch?v=SyMB5063J5E
| 16A
| 2017.08.16
| Hydra
| Hardware
| Maintenance
| Maintenance
| n/a
| n/a
|-
|-
! [[File:ZEsnegXhpLw.jpg|200px]]
! [[File:ZEsnegXhpLw.jpg|200px| link=https://www.youtube.com/watch?v=zEsnegXhpLw]]
| Hyrel Hydra Z Belt Tension Adjustments
| Hyrel Hydra Z Belt Tension Adjustments
| https://www.youtube.com/watch?v=zEsnegXhpLw
| 16A
| 2017.08.16
| Hydra
| Hardware
| Maintenance
| Maintenance
| n/a
| n/a
|-
|-
! [[File:WNr59eCGuK4.png|200px]]
! [[File:WNr59eCGuK4.png|200px| link=https://www.youtube.com/watch?v=WNr59eCGuK4]]
| Changing the Address Resistor on the CO2 Laser
| Changing the Address Resistor on the CO2 Laser
| https://www.youtube.com/watch?v=WNr59eCGuK4
| 16A
| 2017.08.07
| Maintenance
| Hydra
| hardware
| Update
| n/a
| n/a
|-
|-
! [[File:QBBxkx40H8s.png|200px]]
! [[File:QBBxkx40H8s.png|200px| link=https://www.youtube.com/watch?v=qBBxkx40H8s]]
| CO2 Laser Alignment
| CO2 Laser Alignment
| https://www.youtube.com/watch?v=qBBxkx40H8s
| 16A
| 2017.07.27
| Calibration
| Hydra
| Hardware
| Adjustment
| n/a
| n/a
|-
|-
! [[File:YiizFlScq9Q.png|200px]]
! [[File:YiizFlScq9Q.png|200px| link=https://www.youtube.com/watch?v=yiizFlScq9Q]]
| Hydra Yoke Adjustment
| Hydra Yoke Adjustment
| https://www.youtube.com/watch?v=yiizFlScq9Q
| 16A
| 2017.07.14
| Maintenance
| Hydra
| Hardware
| Adjustment
| n/a
| n/a
|-
|-
! [[File:CbiCnP_YEbA.png|200px]]
! [[File:CbiCnP_YEbA.png|200px| link=https://www.youtube.com/watch?v=cbiCnP_YEbA]]
| Hydra Yoke Angle Adjustment
| Hydra Yoke Angle Adjustment
| https://www.youtube.com/watch?v=cbiCnP_YEbA
| 16A
| 2017.07.13
| Maintenance
| Model
| Hardware
| Adjustment
| n/a
| n/a
|-
|-
! [[File:XMsXzGPHjng.png|200px]]
! [[File:XMsXzGPHjng.png|200px| link=https://www.youtube.com/watch?v=xMsXzGPHjng]]
| Engnie, High Resolution (EHR) Setup, Part 2
| Engnie, High Resolution (EHR) Setup, Part 2
| https://www.youtube.com/watch?v=xMsXzGPHjng
| 2017.07.10
| EHR
| EHR
| Hardware, Software
| Setup
| Instruction
| n/a
| n/a
|-
|-
! [[File:NbWgw9KY6Ic.png|200px]]
! [[File:NbWgw9KY6Ic.png|200px| link=https://www.youtube.com/watch?v=NbWgw9KY6Ic]]
| Engnie, High Resolution (EHR) Setup, Part 1
| Engnie, High Resolution (EHR) Setup, Part 1
| https://www.youtube.com/watch?v=NbWgw9KY6Ic
| 2017.07.
| EHR
| EHR
| Hardware, Software
| Setup
| Instruction
| n/a
| n/a
|-
|-
! [[File:UC7acwIkKmQ.png|200px]]
! [[File:UC7acwIkKmQ.png|200px| link=https://www.youtube.com/watch?v=uC7acwIkKmQ]]
| EHR Scaffold Instructions
| EHR Scaffold Instructions
| https://www.youtube.com/watch?v=uC7acwIkKmQ
| 2017.06.26
| EHR
| EHR
| Hardware
| Setup
| Operation
| Non-Filament
| Scaffold
|-
|-
! [[File:b1x2dvdYkTE.png|200px]]
! [[File:b1x2dvdYkTE.png|200px| link=https://www.youtube.com/watch?v=b1x2dvdYkTE]]
| EHR Scaffold Intro
| EHR Scaffold Intro
| https://www.youtube.com/watch?v=b1x2dvdYkTE
| 2017.06.26
| EHR
| EHR
| Hardware
| Setup
| Instruction
| Non-Filament
| Scaffold
|-
|-
! [[File:oisWKujfXAI.png|200px]]
! [[File:oisWKujfXAI.png|200px| link=https://www.youtube.com/watch?v=oisWKujfXAI]]
| Unclogging a rare clogged MK1-250  
| Unclogging a rare clogged MK1-250  
| https://www.youtube.com/watch?v=oisWKujfXAI
| All
| 2017.06.22
| Filaments
| MK1-250, MK2-250
| Hardware
| Maintenance
| Filament
| Clog
|-
|-
! [[File:6FQJuhd2Lxo.png|200px]]
! [[File:6FQJuhd2Lxo.png|200px| link=https://www.youtube.com/watch?v=6FQJuhd2Lxo]]
| Unclogging a rare clogged MK1-450  
| Unclogging a rare clogged MK1-450  
| https://www.youtube.com/watch?v=6FQJuhd2Lxo
| All
| 2017.06.22
| Filaments
| MK1-450
| Hardware
| Maintenance
| Filament
| Clog
|-
|-
! [[File:WrImt7_Pnxo.png|200px]]
! [[File:WrImt7_Pnxo.png|200px| link=https://www.youtube.com/watch?v=WrImt7_Pnxo]]
| Flashing Firmware on the Modified CO2 Laser Controller
| Flashing Firmware on the Modified CO2 Laser Controller
| https://www.youtube.com/watch?v=WrImt7_Pnxo
| 16A
| 2017.06.21
| Maintenance
| CO2 Laser
| Firmware
| Upgrade
| Laser
| n/a
|-
|-
! [[File:1J5bqvcV3Rs.png|200px]]
! [[File:1J5bqvcV3Rs.png|200px| link=https://www.youtube.com/watch?v=1J5bqvcV3Rs]]
| The Hyrel Hydra Family
| The Hyrel Hydra Family
| https://www.youtube.com/watch?v=1J5bqvcV3Rs
| 16A
| 3017.06.06
| Hydra
| Hardware
| Demonstration
| All
| All
| n/a
|-
|-
! [[File:CF7eRdFuZYQ.png|200px]]
! [[File:CF7eRdFuZYQ.png|200px| link=https://www.youtube.com/watch?v=CF7eRdFuZYQ]]
| High Resolution Engine Vacuum Bed
| High Resolution Engine Vacuum Bed
| https://www.youtube.com/watch?v=CF7eRdFuZYQ
| 2017.05.22
| EHR
| EHR
| Hardware
| Reservoirs
| Demonstration
| Any
| Vacuum Bed
|-
|-
! [[File:eltjeQ6KerM.png|200px]]
! [[File:eltjeQ6KerM.png|200px| link=https://www.youtube.com/watch?v=eltjeQ6KerM]]
| High Resolution Engine Setup
| High Resolution Engine Setup
| https://www.youtube.com/watch?v=eltjeQ6KerM
| 2017.05.09
| EHR
| EHR
| Hardware
| Setup
| Instructions
| Any
| n/a
|-
|-
! [[File:SvX4gKqAQDI.png|200px]]
! [[File:SvX4gKqAQDI.png|200px| link=https://www.youtube.com/watch?v=SvX4gKqAQDI]]
| SDS Clench Valve Assembly Instructions
| SDS Clench Valve Assembly Instructions
| https://www.youtube.com/watch?v=SvX4gKqAQDI
| All
| 2017.05.19
| Reservoirs
| SDS
| Hardware
| Instructions
| Non-Filament
| n/a
|-
|-
! [[File:Mz5J8jsb6D4.png|200px]]
! [[File:Mz5J8jsb6D4.png|200px| link=https://www.youtube.com/watch?v=Mz5J8jsb6D4]]
| How to Load the SDS Clench Valve
| How to Load the SDS Clench Valve
| https://www.youtube.com/watch?v=Mz5J8jsb6D4
| All
| 2017.05.16
| Reservoirs
| SDS (all EMO-type)
| Hardware
| Installation
| Non-Filament
| n/a
|-
|-
! [[File:JwKq8_tahYA.png|200px]]
! [[File:JwKq8_tahYA.png|200px| link=https://www.youtube.com/watch?v=JwKq8_tahYA]]
| EHR Accuracy Test
| EHR Accuracy Test
| https://www.youtube.com/watch?v=JwKq8_tahYA
| 2017.05.16
| EHR
| EHR
| Hardware
| Calibration
| Demonstration
| All
| n/a
|-
|-
! [[File:Udbu_Zuh8k0.png|200px]]
! [[File:Udbu_Zuh8k0.png|200px| link=https://www.youtube.com/watch?v=Udbu_Zuh8k0]]
| Hydra 430, 640, 645 Controls Overview
| Hydra 16A Controls Overview
| https://www.youtube.com/watch?v=Udbu_Zuh8k0
| 16A
| 2017.05.08
| Hydra 430, 640, 645
| Hardware
| Overview
| All
| All
| n/a
|-
|-
! [[File:cClPqIJwhLs.png|200px]]
! [[File:cClPqIJwhLs.png|200px| link=https://www.youtube.com/watch?v=cClPqIJwhLs]]
| Using Low Temperature Solder Paste to connect a Flat Flex Cable
| Using Low Temperature Solder Paste to connect a Flat Flex Cable
| https://www.youtube.com/watch?v=cClPqIJwhLs
| 30M, ESR
| 2017.04.17
| Assembly
| n/a
| Hardware
| Demonstration
| Solder Paste
| n/a
|-
|-
! [[File:GCzPw4FOG8c.png|200px]]
! [[File:GCzPw4FOG8c.png|200px| link=https://www.youtube.com/watch?v=GCzPw4FOG8c]]
| Draining Laser Coolant on the Hyrel Hydra
| Draining Laser Coolant on the Hyrel Hydra
| https://www.youtube.com/watch?v=GCzPw4FOG8c
| 16A
| 2017.04.13
| Lasers
| Hydra 640, 645
| Hardware
| Maintenance
| Laser
| n/a
|-
|-
! [[File:pPtGSwyS140.png|200px]]
! [[File:pPtGSwyS140.png|200px| link=https://www.youtube.com/watch?v=pPtGSwyS140]]
| Hydra Home Calibration Details
| Hydra Home Calibration Details
| https://www.youtube.com/watch?v=pPtGSwyS140
| 16A
| 2017.04.07
| Calibration
| Hydra (All)
| Firmware
| Settings
| n/a
| n/a
|-
|-
! [[File:LLIWqTRBhTo.png|200px]]
! [[File:LLIWqTRBhTo.png|200px| link=https://www.youtube.com/watch?v=LLIWqTRBhTo]]
| Replacing the top component on an STS Head Assembly
| Replacing the top component on an SDS Head Assembly
| https://www.youtube.com/watch?v=LLIWqTRBhTo
| 16A
| 2017.04.05
| Setup
| SDS
| Hardware
| Maintenance
| Non-filament
| n/a
|-
|-
! [[File:qxbtI034omk.png|200px]]
! [[File:qxbtI034omk.png|200px| link=https://www.youtube.com/watch?v=qxbtI034omk]]
| HYDRA Hot Bed Installation
| HYDRA Hot Bed Installation
| https://www.youtube.com/watch?v=qxbtI034omk
| 16A
| 2017.03.22
| Setup
| Hydra (All)
| Hardware
| Installation
| All
| n/a
|-
|-
! [[File:fuLCsqfAX3E.png|200px]]
! [[File:fuLCsqfAX3E.png|200px| link=https://www.youtube.com/watch?v=fuLCsqfAX3E]]
| Hydra Model Startup
| Hydra Model Startup
| https://www.youtube.com/watch?v=fuLCsqfAX3E
| 2017.03.22
| Hydra (All)
| Hardware
| Startup
| All
| All
| n/a
| Reservoirs
|-
|-
! [[File:LhnV9H7LV9g.png|200px]]
! [[File:LhnV9H7LV9g.png|200px| link=https://www.youtube.com/watch?v=LhnV9H7LV9g]]
| Unboxing the Hydra Floor Model Units
| Unboxing the Hydra Floor Model Units
| https://www.youtube.com/watch?v=LhnV9H7LV9g
| 16A
| 2017.03.19
| Setup
| Hydra (All)
| Hardware
| Startup
| All
| n/a
|-
|-
! [[File:ULpn18OqD-U.png|200px]]
! [[File:ULpn18OqD-U.png|200px| link=https://www.youtube.com/watch?v=ULpn18OqD-U]]
| Hydra Overview by CTO Karl Gifford
| Hydra Overview by CTO Karl Gifford
| https://www.youtube.com/watch?v=ULpn18OqD-U
| 16A
| 2017.03.09
| Hydra (All
| Hardware
| Overview
| All
| All
| n/a
|-
|-
! [[File:QEfskyU7LJ4.png|200px]]
! [[File:QEfskyU7LJ4.png|200px | link=https://www.youtube.com/watch?v=QEfskyU7LJ4]]
| How to Manage the Pick-and-Place with Repetrel Software
| How to Manage the Pick-and-Place with Repetrel Software
| https://www.youtube.com/watch?v=QEfskyU7LJ4
| 16A
| 2017.03.02
| Pick-and-Place
| PNP
| Hardware
| Setup
| PNP
| n/a
|-
|-
! [[File:Jz3onGdmW1c.png|200px]]
! [[File:Jz3onGdmW1c.png|200px| link=https://www.youtube.com/watch?v=Jz3onGdmW1c]]
| Hyrel Hydra Versitility
| Hyrel Hydra Versitility
| https://www.youtube.com/watch?v=Jz3onGdmW1c
| 16A
| 2017.02.08
| Hydra (All)
| Hardware
| Introduction
| All
| All
| n/a
|-
|-
! [[File:pKkrd4R_54Y.png|200px]]
! [[File:pKkrd4R_54Y.png|200px| link=https://www.youtube.com/watch?v=pKkrd4R_54Y]]
| Hydra Vinyl Cutter Overview
| Hydra Vinyl Cutter Overview
| https://www.youtube.com/watch?v=pKkrd4R_54Y
| 16A
| 2017.02.16
| Cutting
| Hydra (All)
| Hardware
| Demonstration
| Vinyl
| n/a
|-
|-
! [[File:haKWeCbXkMI.png|200px]]
! [[File:haKWeCbXkMI.png|200px| link=https://www.youtube.com/watch?v=haKWeCbXkMI]]
| Hyrel 3D Hydra Pick-and-Place Introduction
| Hyrel 3D Hydra Pick-and-Place Introduction
| https://www.youtube.com/watch?v=haKWeCbXkMI
| 16A
| 2017.02.10
| Pick-and-Place
| Hydra (All)
| Hardware
| Introduction
| Pick-And-Place
| n/a
|-
|-
! [[File:uACoqtNbXE0.png|200px]]
! [[File:uACoqtNbXE0.png|200px| link=https://www.youtube.com/watch?v=uACoqtNbXE0]]
| The Hyrel3D Hydra Line
| The Hyrel3D Hydra Line
| https://www.youtube.com/watch?v=uACoqtNbXE0
| 16A
| 2017.01.26
| Hydra
| Hardware
| Introduction
| All
| All
| n/a
|-
|-
! [[File:KAoSS-Z-aeY.png|200px]]
! [[File:KAoSS-Z-aeY.png|200px| link=https://www.youtube.com/watch?v=KAoSS-Z-aeY]]
| Tramming the bed on the 16A
| Tramming the bed on the 16A
| https://www.youtube.com/watch?v=KAoSS-Z-aeY
| 16A
| 2017.01.19
| Hydra (All)
| Hardware
| Maintenance
| Maintenance
| n/a
| n/a
|-
|-
! [[File:tibkVZB_n9c.png|200px]]
! [[File:tibkVZB_n9c.png|200px| link=https://www.youtube.com/watch?v=tibkVZB_n9c]]
| The Benefits of Microscope Inspection During Printing
| The Benefits of Microscope Inspection During Printing
| https://www.youtube.com/watch?v=tibkVZB_n9c
| 2017.01.06
| All
| All
| Hardware
| Microscopes
| Instruction
| All
| n/a
|-
|-
! [[File:aR4d-2BZj_Y.png|200px]]
! [[File:aR4d-2BZj_Y.png|200px| link=https://www.youtube.com/watch?v=aR4d-2BZj_Y]]
| Printing PLGA for internal Biological Applications
| Printing PLGA for internal Biological Applications
| https://www.youtube.com/watch?v=aR4d-2BZj_Y
| 2017.01.02
| All
| All
| Hardware
| Reservoirs
| Maintenance
|-
| Emulsion
|}
| n/a
 
=== 2016 (60) ===
 
{| border="1" class="wikitable sortable" style="text-align: center"
|+ Table of Video Links, 2016
! Video Link
! Subject
! Printer Model
! Head / Activity
|-
|-
! [[File:Z4IGQ5JMP6g.png|200px]]
! [[File:Z4IGQ5JMP6g.png|200px| link=https://www.youtube.com/watch?v=z4IGQ5JMP6g]]
| Varialble Width Conductive Paste Extrusion  
| Varialble Width Conductive Paste Extrusion  
| https://www.youtube.com/watch?v=z4IGQ5JMP6g
| Any
| 2016.12.30
| Reservoirs
| All
| Hardware
| Introduction
| Emulsion
| n/a
|-
|-
! [[File:2f5FEhVsqy8.png|200px]]
! [[File:2f5FEhVsqy8.png|200px| link=https://www.youtube.com/watch?v=2f5FEhVsqy8]]
| Microscope Print View Setup
| Microscope Print View Setup
| https://www.youtube.com/watch?v=2f5FEhVsqy8
| Any
| 2016.12.30
| Microscope
| All
| Hardware
| Maintenance
| All
| n/a
|-
|-
! [[File:D2sWEYRVAII.png|200px]]
! [[File:D2sWEYRVAII.png|200px| link=https://www.youtube.com/watch?v=D2sWEYRVAII]]
| Replacing the LED Strip
| Replacing the LED Strip
| https://www.youtube.com/watch?v=D2sWEYRVAII
| 30M
| 2016.12.23
| System 30M
| Hardware
| Maintenance
| Maintenance
| LEDs
| n/a
|-
|-
! [[File:14ynZ3DHzVg.png|200px]]
! [[File:14ynZ3DHzVg.png|200px| link=https://www.youtube.com/watch?v=14ynZ3DHzVg]]
| Replacing the Front Switch Panel
| Replacing the Front Switch Panel
| https://www.youtube.com/watch?v=14ynZ3DHzVg
| 30M
| 2016.12.23
| System 30M
| Hardware
| Maintenance
| Maintenance
| Switch Panel
| n/a
|-
|-
! [[File:DQj6oLfrbLo.png|200px]]
! [[File:DQj6oLfrbLo.png|200px| link=https://www.youtube.com/watch?v=DQj6oLfrbLo]]
| Static Mixing Head Explained - v2 Including SDS Heads
| Static Mixing Head (SMH) Explained - v2 Including SDS Heads
| https://www.youtube.com/watch?v=DQj6oLfrbLo
| Any
| 2016.12.20
| Reservoirs
| All
| Hardware
| Introduction
| Emulsion
| n/a
|-
|-
! [[File:VJXnB-8JII.png|200px]]
! [[File:VJXnB-8JII.png|200px| link=https://www.youtube.com/watch?v=_vJXnB-8JII]]
| Hot Bed Manufacturing
| Hot Bed Manufacturing
| https://www.youtube.com/watch?v=_vJXnB-8JII
| 2016.12.16
| Hydra
| Hydra
| Hardware
| Manufacturing
| Instruction
| All
| HotBed
|-
|-
! [[File:3azICOBuHdk.png|200px]]
! [[File:3azICOBuHdk.png|200px| link=https://www.youtube.com/watch?v=3azICOBuHdk]]
| Static Mixing Head Explained
| Static Mixing Head (SMH) Explained
| https://www.youtube.com/watch?v=3azICOBuHdk
| Any
| 2016.12.15
| Reservoirs
| MODEL
| Hardware
| Instruction
| Emulsion
| Static Mixing
|-
|-
! [[File:6qJ-2uFt-_Y.png|200px]]
! [[File:6qJ-2uFt-_Y.png|200px| link=https://www.youtube.com/watch?v=6qJ-2uFt-_Y]]
| Timelapse Recording
| Timelapse Recording
| https://www.youtube.com/watch?v=6qJ-2uFt-_Y
| Any
| 2016.12.06
| Recording
| All
| Software
| Instruction
| n/a
| n/a
|-
|-
! [[File:ROpcvqS r8s.png|200px]]
! [[File:ROpcvqS r8s.png|200px| link=https://www.youtube.com/watch?v=ROpcvqS_r8s]]
| HotHead LEDs Explained
| HotHead LEDs Explained
| https://www.youtube.com/watch?v=ROpcvqS r8s
| Any
| 2016.12.06
| Any
| All
| Hardware
| Instruction
| All
| LEDs
|-
|-
! [[File:Tz6mRSkOaSk.png|200px]]
! [[File:Tz6mRSkOaSk.png|200px| link=https://www.youtube.com/watch?v=Tz6mRSkOaSk]]
| LA6-450 and LA5-808 Laser Overview
| LA6-450 and LA5-808 Laser Overview
| https://www.youtube.com/watch?v=Tz6mRSkOaSk
| Any
| 2016.12.02
| Lasers
| LA5-808, LA6-450
| Hardware
| Instruction
| Laser
| n/a
|-
|-
! [[File:h95IurET7UM.png|200px]]
! [[File:h95IurET7UM.png|200px| link=https://www.youtube.com/watch?v=h95IurET7UM]]
| SDS and CSD Overview
| SDS and CSD Overview
| https://www.youtube.com/watch?v=h95IurET7UM
| Any
| 2016.11.29
| Reservoirs
| SDS, CSD
| Hardware
| Instruction
| Emulsion
| n/a
|-
|-
! [[File:4B9hoMLNOuQ.png|200px]]
! [[File:4B9hoMLNOuQ.png|200px| link=https://www.youtube.com/watch?v=4B9hoMLNOuQ]]
| Quiet Storm Cooling Fan Overview
| Quiet Storm Cooling Fan Overview
| https://www.youtube.com/watch?v=4B9hoMLNOuQ
| Any
| 2016.11.28
| Filaments
| QS
| Hardware
| Overview
| Filament
| n/a
|-
|-
! [[File:9_onCKhT_dg.png|200px]]
! [[File:9_onCKhT_dg.png|200px| link=https://www.youtube.com/watch?v=9_onCKhT_dg]]
| VOL-25 and VCD-25 Overview
| VOL-25 and VCD-25 Overview
| https://www.youtube.com/watch?v=9_onCKhT_dg
| Any
| 2016.11.28
| Reservoirs
| VOL-25, VCD-25
| Hardware
| Overview
| Emulsion
| n/a
|-
|-
! [[File:QD2FrZ4kg1g.png|200px]]
! [[File:QD2FrZ4kg1g.png|200px| link=https://www.youtube.com/watch?v=QD2FrZ4kg1g]]
| KRA-15 and KCD-15 Overview
| KRA-15 and KCD-15 Overview
| https://www.youtube.com/watch?v=QD2FrZ4kg1g
| Any
| 2016.11.28
| Reservoirs
| KRA-15, KCD-15
| Hardware
| Overview
| Emulsion
| n/a
|-
|-
! [[File:Rc2UFwjUtc4.png|200px]]
! [[File:Rc2UFwjUtc4.png|200px| link=https://www.youtube.com/watch?v=Rc2UFwjUtc4]]
| Hydra 640 (16A) Two Part Test Print
| Hydra 640 (16A) Two Part Test Print
| https://www.youtube.com/watch?v=Rc2UFwjUtc4
| Hydra
| 2016.11.23
| Filaments
| Hydra (All)
| Hardware
| Demonstration
| Filament
| n/a
|-
|-
! [[File:Ql1NZLWVJQM.png|200px]]
! [[File:Ql1NZLWVJQM.png|200px| link=https://www.youtube.com/watch?v=Ql1NZLWVJQM]]
| Extrusion Prototype Print
| Extrusion Prototype Print
| https://www.youtube.com/watch?v=Ql1NZLWVJQM
| Any
| 2016.11.23
| Filaments
| Hydra 640
| Hardware
| Demonstration
| Filament
| n/a
|-
|-
! [[File:KtK256u0sN8.png|200px]]
! [[File:KtK256u0sN8.png|200px| link=https://www.youtube.com/watch?v=ktK256u0sN8]]
| EMO-25 and COD-25 Overview
| EMO-25 and COD-25 Overview
| https://www.youtube.com/watch?v=ktK256u0sN8
| Any
| 2016.11.17
| Reservoirs
| EMO-25, COD-25
| Hardware
| Overview
| Emulsion
| n/a
|-
|-
! [[File:Vn8jnvwh5to.png|200px]]
! [[File:Vn8jnvwh5to.png|200px| link=https://www.youtube.com/watch?v=Vn8jnvwh5to]]
| Session 3C Slicing for Second Head Support
| Session 3C Slicing for Multiple Head Support
| https://www.youtube.com/watch?v=Vn8jnvwh5to
| 2016.11.15
| Any
| Any
| Software
| Slicing
| Slicing
| Any
| n/a
|-
|-
! [[File:p1Ihd4ETxhg.png|200px]]
! [[File:p1Ihd4ETxhg.png|200px| link=https://www.youtube.com/watch?v=p1Ihd4ETxhg]]
| Session 3A - Setting Two Heads to Z-Zero
| Session 3A - Setting Two Heads to Z-Zero
| https://www.youtube.com/watch?v=p1Ihd4ETxhg
| Any
| 2016.11.14
| Setup
| All
| Software
| Instruction
| All
| n/a
|-
|-
! [[File:FCuSvQm6ej4.png|200px]]
! [[File:FCuSvQm6ej4.png|200px| link=https://www.youtube.com/watch?v=FCuSvQm6ej4]]
| Session 3B - Calibrating the Offset Between Two Heads
| Session 3B - Calibrating the Offset Between Two Heads
| https://www.youtube.com/watch?v=FCuSvQm6ej4
| Any
| 2016.11.14
| Setup
| All
| Software
| Instruction
| All
| n/a
|-
|-
! [[File:dkQpsJWRI4Y.png|200px]]
! [[File:dkQpsJWRI4Y.png|200px| link=https://www.youtube.com/watch?v=dkQpsJWRI4Y]]
| Session 2D - Editing Slic3r Recipes
| Session 2D - Editing Slic3r Recipes
| https://www.youtube.com/watch?v=dkQpsJWRI4Y
| Any
| 2016.11.109
| Slicing
| All
| Software
| Instruction
| All
| n/a
|-
|-
! [[File:kJc9sNlV0fA.png|200px]]
! [[File:kJc9sNlV0fA.png|200px| link=https://www.youtube.com/watch?v=kJc9sNlV0fA]]
| Session 2E - Slicing your STL and Viewing your GCODE
| Session 2E - Slicing your STL and Viewing your GCODE
| https://www.youtube.com/watch?v=kJc9sNlV0fA
| Any
| 2016.11.09
| Slicing
| All
| Software
| Instruction
| All
| n/a
|-
|-
! [[File:IQbgGwiGVZA.png|200px]]
! [[File:IQbgGwiGVZA.png|200px| link=https://www.youtube.com/watch?v=IQbgGwiGVZA]]
| Session 2C - Positioning, Scaling, and Rotating your STL
| Session 2C - Positioning, Scaling, and Rotating your STL
| https://www.youtube.com/watch?v=IQbgGwiGVZA
| Any
| 2016.
| Slicing
| All
| Software
| Instruction
| All
| n/a
|-
|-
! [[File:mVyCq7CPGLg.png|200px]]
! [[File:mVyCq7CPGLg.png|200px| link=https://www.youtube.com/watch?v=mVyCq7CPGLg]]
| Session 1A - Hardware and Software Overview
| Session 1A - Hardware and Software Overview
| https://www.youtube.com/watch?v=mVyCq7CPGLg
| Any
| 2016.11.03
| Overview
| All
| Software
| Instruction
| All
| n/a
|-
|-
! [[File:2tIHw_JIQAI.png|200px]]
! [[File:2tIHw_JIQAI.png|200px| link=https://www.youtube.com/watch?v=2tIHw_JIQAIv]]
| Session 1B - Communications and Bed Leveling
| Session 1B - Communications and Bed Leveling
| https://www.youtube.com/watch?v=2tIHw_JIQAI
| 30M, ESR
| 2016.11.02
| Setup
| All
| Software
| Instruction
| All
| n/a
|-
|-
! [[File:lFATCfKJf4I.png|200px]]
! [[File:lFATCfKJf4I.png|200px| link=https://www.youtube.com/watch?v=lFATCfKJf4I]]
| Session 1C - Printing with Plasticine
| Session 1C - Printing with Plasticine
| https://www.youtube.com/watch?v=lFATCfKJf4I
| Any
| 2016.11.02
| Reservoirs
| All
| Software
| Instruction
| All
| n/a
|-
|-
! [[File:2yHRuef29L4.png|200px]]
! [[File:2yHRuef29L4.png|200px| link=https://www.youtube.com/watch?v=2yHRuef29L4]]
| Session 2A: Simple CAD Modeling in FreeCAD
| Session 2A: Simple CAD Modeling in FreeCAD
| https://www.youtube.com/watch?v=2yHRuef29L4
| Any
| 2016.08.24
| All
| Software
| Instruction
| All
| n/a
|-
! [[File:eLGIRAgLz4w.png|200px]]
| Session 2B - Healing an STL in MeshLab
| https://www.youtube.com/watch?v=eLGIRAgLz4w
| 2016.08.17
| All
| Software
| Software
| Instruction
| All
| n/a
|-
|-
! [[File:RlJqdhtpB6Q.png|200px]]
! [[File:RlJqdhtpB6Q.png|200px| link=https://www.youtube.com/watch?v=RlJqdhtpB6Q]]
| PC to Printer Connectivity
| PC to Printer Connectivity
| https://www.youtube.com/watch?v=RlJqdhtpB6Q
| Any
| 2016.11.01
| Setup
| All
| Software
| Instruction
| All
| n/a
|-
|-
! [[File:C88ni0huwhw.png|200px]]
! [[File:C88ni0huwhw.png|200px| link=https://www.youtube.com/watch?v=C88ni0huwhw]]
| Using the Spindle Tool to rework Circuit Boards
| Using the Spindle Tool to rework Circuit Boards
| https://www.youtube.com/watch?v=C88ni0huwhw
| Any
| 2016.10.27
| Spindle
| All
| Hardware
| Instruction
| Spindle Tool
| n/a
|-
|-
! [[File:KIGeQmXNbNE.png|200px]]
! [[File:KIGeQmXNbNE.png|200px| link=https://www.youtube.com/watch?v=KIGeQmXNbNE]]
| Running a FADAL CNC on Hyrel3D Circuitry, Firmware and Software
| Running a FADAL CNC on Hyrel3D Circuitry, Firmware and Software
| https://www.youtube.com/watch?v=KIGeQmXNbNE
| 2016.10.17
| All
| All
| Demonstration
| n/a
| n/a
| n/a
| Manufacturing
|-
|-
! [[File:ImMo3V1D70w.png|200px]]
! [[File:ImMo3V1D70w.png|200px| link=https://www.youtube.com/watch?v=ImMo3V1D70w]]
| Table Arm (X-Arm) Block Adjustment
| Table Arm (X-Arm) Block Adjustment
| https://www.youtube.com/watch?v=ImMo3V1D70w
| 30M, ESR
| 2016.10.14
| Non-Hydras
| Hardware
| Maintenance
| Maintenance
| All
| n/a
|-
|-
! [[File:yaCYFmoIESk.png|200px]]
! [[File:yaCYFmoIESk.png|200px| link=https://www.youtube.com/watch?v=yaCYFmoIESk]]
| MK1-250 Overview
| MK1-250 Overview
| https://www.youtube.com/watch?v=yaCYFmoIESk
| Any
| 2016.10.14
| Filaments
| All
| Hardware
| Instruction
| MK1-250
| n/a
|-
|-
! [[File:UvZMecXsHEM.png|200px]]
! [[File:UvZMecXsHEM.png|200px| link=https://www.youtube.com/watch?v=UvZMecXsHEM]]
| MK1-450 Overview
| MK1-450 Overview
| https://www.youtube.com/watch?v=UvZMecXsHEM
| Any
| 2016.10.14
| Filaments
| All
| Hardware
| Instruction
| MK1-450
| n/a
|-
|-
! [[File:SOGKeU3vLbs.png|200px]]
! [[File:SOGKeU3vLbs.png|200px| link=https://www.youtube.com/watch?v=SOGKeU3vLbs]]
| MK2-250 Overview
| MK2-250 Overview
| https://www.youtube.com/watch?v=SOGKeU3vLbs
| Any
| 2016.10.14
| Filaments
| All
| Hardware
| Instruction
| MK2-250
| n/a
|-
|-
! [[File:FkJT3ILlAHw.png|200px]]
! [[File:FkJT3ILlAHw.png|200px| link=https://www.youtube.com/watch?v=FkJT3ILlAHw]]
| Hyrel3D Replacing the Heated Build Platform
| Replacing the 30M/ESR Heated Build Platform
| https://www.youtube.com/watch?v=FkJT3ILlAHw
| 30M, ESR
| 2016.10.03
| Maintenance
| All
| Hardware
| Instruction
| HotBed
| n/a
|-
|-
! [[File:3KwJ6OgOx14.png|200px]]
! [[File:3KwJ6OgOx14.png|200px| link=https://www.youtube.com/watch?v=3KwJ6OgOx14]]
| Multi Head Printing - Nested STLs
| Multi Head Printing - Nested STLs
| https://www.youtube.com/watch?v=3KwJ6OgOx14
| Any
| 2016.09.22
| All
| Software
| Software
| Instruction
| All
| n/a
|-
|-
! [[File:4GYWfMrs0F8.png|200px]]
! [[File:4GYWfMrs0F8.png|200px| link=https://www.youtube.com/watch?v=4GYWfMrs0F8]]
| X-Axis Belt Tightening
| X-Axis Belt Tightening
| https://www.youtube.com/watch?v=4GYWfMrs0F8
| 30M, ESR
| 2016.09.22
| S30, ESR
| Hardware
| Maintenance
| Maintenance
| All
| n/a
|-
|-
! [[File:IkgviAGep-c.png|200px]]
! [[File:IkgviAGep-c.png|200px| link=https://www.youtube.com/watch?v=IkgviAGep-c]]
| Y-Axis Belt Tightening
| Y-Axis Belt Tightening
| https://www.youtube.com/watch?v=IkgviAGep-c
| 30M, ESR
| 2016.09.21
| S30, ESR
| Hardware
| Maintenance
| Maintenance
| All
| n/a
|-
|-
! [[File:lQy25Nlj3_Q.png|200px]]
! [[File:lQy25Nlj3_Q.png|200px| link=https://www.youtube.com/watch?v=lQy25Nlj3_Q]]
| Plasma Magnetic Vortex Deposition
| Plasma Magnetic Vortex Deposition (ElectroSpinning)
| https://www.youtube.com/watch?v=lQy25Nlj3_Q
| EHR
| 2016.09.21
| Electro (Melt) Spinning
| Any
| Hardware
| Demonstration
| EMO-HV
| n/a
|-
|-
! [[File:LQb5vS97jFo.png|200px]]
! [[File:LQb5vS97jFo.png|200px| link=https://www.youtube.com/watch?v=LQb5vS97jFo]]
| 3D Milling on the Hydra Series
| 3D Milling on the Hydra Series
| https://www.youtube.com/watch?v=LQb5vS97jFo
| 2016.09.02
| Hydra
| Hydra
| Hardware
| Spindle
| Demonstration
| ST1 Spindle Tool
| n/a
|-
|-
! [[File:81sVBZOOcbw.png|200px]]
! [[File:81sVBZOOcbw.png|200px| link=https://www.youtube.com/watch?v=81sVBZOOcbw]]
| Introducing the Hydra 640 (formerly Model 16A)
| Introducing the Hydra 640 (formerly Model 16A)
| https://www.youtube.com/watch?v=81sVBZOOcbw
| 2016.08.05
| Hydra
| Hydra
| Hardware
| Overview
| Introduction
| Any
| n/a
|-
|-
! [[File:uPqr4S0WC3Q.png|200px]]
! [[File:uPqr4S0WC3Q.png|200px| link=https://www.youtube.com/watch?v=uPqr4S0WC3Q]]
| USBB Jumper Instructions
| USBB Jumper Instructions
| https://www.youtube.com/watch?v=uPqr4S0WC3Q
| 2016.07.19
| S30M, ESR, EHR
| Hardware
| Instruction
| Any
| Any
| n/a
| Setup
|-
|-
! [[File:Rw2E_d-q9bQ.png|200px]]
! [[File:Rw2E_d-q9bQ.png|200px| link=https://www.youtube.com/watch?v=Rw2E_d-q9bQ]]
| Size Does Matter
| Size Does Matter
| https://www.youtube.com/watch?v=Rw2E_d-q9bQ
| Hydra
| 2016.07.11
| Overview
| Hydra Series
| Hardware
| Introduction
| Any
| n/a
|-
|-
! [[File:xGriCCrfkuw.png|200px]]
! [[File:xGriCCrfkuw.png|200px| link=https://www.youtube.com/watch?v=xGriCCrfkuw]]
| Print Heads Overview
| Print Heads Overview
| https://www.youtube.com/watch?v=xGriCCrfkuw
| 2016.006.16
| Any
| Any
| Hardware
| All
| Overview
| Print Heads
| n/a
|-
|-
! [[File:QMyuKdgiWI4.png|200px]]
! [[File:QMyuKdgiWI4.png|200px| link=https://www.youtube.com/watch?v=QMyuKdgiWI4]]
| Session 2F - Loading and Printing with Filaments, MK-Series Heads
| Session 2F - Loading and Printing with Filaments, MK-Series Heads
| https://www.youtube.com/watch?v=QMyuKdgiWI4
| 2016.06.03
| Any
| Any
| Hardware
| Filaments
| Instruction
| MK Series
| n/a
|-
|-
! [[File:ysO8oAzFwC4.png|200px]]
! [[File:ysO8oAzFwC4.png|200px| link=https://www.youtube.com/watch?v=ysO8oAzFwC4]]
| MK1-250 PEEK Nozzle Assembly
| MK1-250 PEEK Nozzle Assembly
| https://www.youtube.com/watch?v=ysO8oAzFwC4
| 2016.05.02
| Any
| Any
| Hardware
| Filaments
| Instruction
| MK1-250, MK2-250
| n/a
|-
|-
! [[File:BoHRC9m5nlQ.png|200px]]
! [[File:BoHRC9m5nlQ.png|200px| link=https://www.youtube.com/watch?v=BoHRC9m5nlQ]]
| New Hydra Printer Line Intro
| New Hydra Printer Line Intro
| https://www.youtube.com/watch?v=BoHRC9m5nlQ
| 2016.03.28
| Hydra
| Hydra
| Hardware
| Overview
| Introduction
| Any
| n/a
|-
|-
! [[File:XREWb_Md5o0.png|200px]]
! [[File:XREWb_Md5o0.png| link=https://www.youtube.com/watch?v=XREWb_Md5o0]]
| Bioplotting for under $10K
| Bioplotting for under $10K
| https://www.youtube.com/watch?v=XREWb_Md5o0
| EHR
| 2016.02.17
| Any
| Hardware
| Introduction
| Introduction
| SDS Series
| n/a
|-
|-
! [[File:9zxxBYbdlOE.png|200px]]
! [[File:9zxxBYbdlOE.png|200px| link=https://www.youtube.com/watch?v=9zxxBYbdlOE]]
| Programming Head Offsets
| Programming Head Offsets
| https://www.youtube.com/watch?v=9zxxBYbdlOE
| 2016.02.17
| All
| Software
| Instruction
| Any
| Any
| n/a
| Setup
|-
|-
! [[File:nfIvS50zLyc.png|200px]]
! [[File:nfIvS50zLyc.png|200px| link=https://www.youtube.com/watch?v=nfIvS50zLyc]]
| Slicing for a Two-Material Print
| Slicing for a Two-Material Print
| https://www.youtube.com/watch?v=nfIvS50zLyc
| 2016.02.17
| Any
| Any
| Software
| Slicing
| Instruction
| Any
| n/a
|-
|-
! [[File:0dS3bC0BnRQ.png|200px]]
! [[File:0dS3bC0BnRQ.png|200px| link=https://www.youtube.com/watch?v=0dS3bC0BnRQ]]
| Loading Filament and Printing with the Hyrel3D MK2-250
| Loading Filament and Printing with the Hyrel3D MK2-250
| https://www.youtube.com/watch?v=0dS3bC0BnRQ
| 2016.02.09
| Any
| Any
| Hardware
| Filaments
| Instruction
| MK2-250
| n/a
|-
|-
! [[File:v2ifSlZ0qEw.png|200px]]
! [[File:v2ifSlZ0qEw.png|200px| link=https://www.youtube.com/watch?v=v2ifSlZ0qEw]]
| Loading Filament and Printing with the Hyrel3D MK1-250
| Loading Filament and Printing with the Hyrel3D MK1-250
| https://www.youtube.com/watch?v=v2ifSlZ0qEw
| 2016.02.08
| Any
| Any
| Hardware
| Filaments
| Instruction
| MK1-250
| n/a
|-
|-
! [[File:q-DbAbNMW48.png|200px]]
! [[File:q-DbAbNMW48.png|200px| link=https://www.youtube.com/watch?v=q-DbAbNMW48]]
| Loading and Printing with the EMO-25 Print Head
| Loading and Printing with the EMO-25 Print Head
| https://www.youtube.com/watch?v=q-DbAbNMW48
| 2016.02.04
| Any
| Any
| Hardware
| Reservoirs
| Instruction
| EMO-25
| n/a
|-
|-
! [[File:ej55bZXrltA.png|200px]]
! [[File:ej55bZXrltA.png|200px| link=https://www.youtube.com/watch?v=ej55bZXrltA]]
| SDS RTV Instructions, v2
| SDS RTV Instructions, v2
| https://www.youtube.com/watch?v=ej55bZXrltA
| 2016.02.04
| Any
| Any
| Hardware
| Reservoirs
| Instruction
| SDS Series
| RTV
|-
|-
! [[File:MwrhV74NjCQ.png|200px]]
! [[File:MwrhV74NjCQ.png|200px| link=https://www.youtube.com/watch?v=MwrhV74NjCQ]]
| Intro to Hyrel Possibilities - Jan 2016
| Intro to Hyrel Possibilities - Jan 2016
| https://www.youtube.com/watch?v=MwrhV74NjCQ
| 2016.01.25
| All
| All
| Hardware
| Overview
| Overview
| All
| n/a
|-
|-
! [[File:V_zCytnGvvo.png|200px]]
! [[File:V_zCytnGvvo.png|200px| link=https://www.youtube.com/watch?v=V_zCytnGvvo]]
| MK2-250 Dual Drive for Flexible Filaments
| MK2-250 Dual Drive for Flexible Filaments
| https://www.youtube.com/watch?v=V_zCytnGvvo
| 2016.01.20
| Any
| Any
| Hardware
| Filaments
| Introduction
| MK2-250
| n/a
|-
|-
! [[File:O1IGa-8y9yQ.png|200px]]
! [[File:O1IGa-8y9yQ.png|200px| link=https://www.youtube.com/watch?v=O1IGa-8y9yQ]]
| 6w, 450nm Laser Test
| 6w, 450nm Laser Test
| https://www.youtube.com/watch?v=O1IGa-8y9yQ
| 2016.01.14
| Any
| Any
| Hardware
| Lasers
| Demonstration
| LA6-450
| n/a
|-
|-
! [[File:0JJp7HeK35M.png|200px]]
! [[File:0JJp7HeK35M.png|200px| link=https://www.youtube.com/watch?v=0JJp7HeK35M]]
| SDS RTV Instructions, v1
| SDS RTV Instructions, v1
| https://www.youtube.com/watch?v=0JJp7HeK35M
| 2016.01.14
| Any
| Any
| Hardware
| Reservoirs
| Instructions
| SDS Series
| n/a
|-
|-
! [[File:XKHa1CXnSdI.png|200px]]
! [[File:XKHa1CXnSdI.png|200px| link=https://www.youtube.com/watch?v=XKHa1CXnSdI]]
| Introducing the SDS Print Heads
| Introducing the SDS Print Heads
| https://www.youtube.com/watch?v=XKHa1CXnSdI
| 2016.01.08
| Any
| Any
| Hardware
| SDS
| Introduction
| SDS Series
| n/a
|-
|-
! [[File:BlSGlOpyipI.png|200px]]
! [[File:BlSGlOpyipI.png|200px| link=https://www.youtube.com/watch?v=BlSGlOpyipI]]
| Sneak Peek: Pick and Place Prototype
| Sneak Peek: Pick and Place Prototype
| https://www.youtube.com/watch?v=BlSGlOpyipI
| 2016.01.05
| Hydra
| Hydra
| Hardware
| Pick-and-Place
| Introduction
|-
| PNP Pick and Place
|}
| n/a
 
=== 2012-2015 (42) ===
 
{| border="1" class="wikitable sortable" style="text-align: center"
|+ Table of Video Links, 2012-2015
! Video Link
! Subject
! Printer Model
! Head / Activity
|-
|-
! [[File:OceUiuTixPA.png|200px]]
! [[File:OceUiuTixPA.png|200px|link=https://www.youtube.com/watch?v=OceUiuTixPA]]
| LA6-450: 6w, 450nm Diode Laser Head
| LA6-450: 6w, 450nm Diode Laser Head
| https://www.youtube.com/watch?v=OceUiuTixPA
| 2015.12.22
| Any
| Any
| Hardware
| Lasers
| Introduction
| LA6-450
| n/a
|-
|-
! [[File:vmw0LS_f9V0E.png|200px]]
! [[File:vmw0LS_f9V0E.png|200px|link=https://www.youtube.com/watch?v=vmw0LS_f9V0]]
| 3D Printing RTV Silicone
| 3D Printing RTV Silicone
| https://www.youtube.com/watch?v=vmw0LS_f9V0
| 2015.12.18
| Any
| Any
| Hardware
| Reservoirs
| Demonstration
| SDS-Series
| n/a
|-
|-
! [[File:YWe3TQGgNW0.png|200px]]
! [[File:YWe3TQGgNW0.png|200px|link=https://www.youtube.com/watch?v=YWe3TQGgNW0]]
| Loading the VCD-25
| Loading the VCD-25
| https://www.youtube.com/watch?v=YWe3TQGgNW0
| 2015.12.09
| Any
| Any
| Hardware
| Reservoirs
| Instruction
| VCD-25
| n/a
|-
|-
! [[File:huJuexTLbYA.png|200px]]
! [[File:huJuexTLbYA.png|200px|link=https://www.youtube.com/watch?v=huJuexTLbYA]]
| Short Porcelain Print Demo
| Short Porcelain Print Demo
| https://www.youtube.com/watch?v=huJuexTLbYA
| 2015.12.08
| Any
| Any
| Hardware
| Reservoirs
| Demonstration
| EMO-25
| n/a
|-
|-
! [[File:b583I7AlGJI.png|200px]]
! [[File:b583I7AlGJI.png|200px|link=https://www.youtube.com/watch?v=b583I7AlGJI]]
| Replacing the Tablet Interface Board
| Replacing the Tablet Interface Board
| https://www.youtube.com/watch?v=b583I7AlGJI
| 30M
| 2015.11.25
| Maintenance
| System 30M, EHR
| Hardware
| Instruction
| n/a
| n/a
|-
|-
! [[File:ZKAzXoJ0q8Y.png|200px]]
! [[File:ZKAzXoJ0q8Y.png|200px|link=https://www.youtube.com/watch?v=ZKAzXoJ0q8Y]]
| 2016 Design Contest Video
| 2016 Design Contest Video
| https://www.youtube.com/watch?v=ZKAzXoJ0q8Y
| N/A
| 2015.11.17
| System 30M
| Hardware
| Contest
| Contest
| All
| n/a
|-
|-
! [[File:YRsyEGHyt3k.png|200px]]
! [[File:YRsyEGHyt3k.png|200px|link=https://www.youtube.com/watch?v=YRsyEGHyt3k]]
| DXF to Laser Gcode Generation
| DXF to Laser Gcode Generation
| https://www.youtube.com/watch?v=YRsyEGHyt3k
| 2015.10.20
| Any
| Any
| Software
| Setup
| Instruction
| Laser, Spindle Tool
| n/a
|-
|-
! [[File:Om9cjxMXuxY.png|200px]]
! [[File:Om9cjxMXuxY.png|200px|link=https://www.youtube.com/watch?v=Om9cjxMXuxY]]
| Printing PEEK (PolyEther Ether Ketone) and PC (PolyCarbonate)
| Printing PEEK (PolyEther Ether Ketone) and PC (PolyCarbonate)
| https://www.youtube.com/watch?v=Om9cjxMXuxY
| 2015.09.29
| Any
| Any
| Hardware
| Filaments
| Demonstration
| MK1-450
| n/a
|-
|-
! [[File:IreaoCfQ8mE.png|200px]]
! [[File:IreaoCfQ8mE.png|200px|link=https://www.youtube.com/watch?v=IreaoCfQ8mE]]
| Healing with MeshLab
| Healing with MeshLab
| https://www.youtube.com/watch?v=IreaoCfQ8mE
| 2015.09.01
| Any
| Any
| Software
| Setup
| Instruction
| Any
| n/a
|-
|-
! [[File:0Aj9WCabPgw.png|200px]]
! [[File:0Aj9WCabPgw.png|200px|link=https://www.youtube.com/watch?v=0Aj9WCabPgw]]
| Postprocessing with a Heat Gun
| Postprocessing with a Heat Gun
| https://www.youtube.com/watch?v=0Aj9WCabPgw
| 2015.08.17
| Any
| Any
| Hardware
| Postprocessing
| Instruction
| Any
| n/a
|-
|-
! [[File:4oxCqR_DVNQ.png|200px]]
! [[File:4oxCqR_DVNQ.png|200px|link=https://www.youtube.com/watch?v=4oxCqR_DVNQ]]
| Introduction to Hyrel 3D Possibilities, 2015
| Introduction to Hyrel 3D Possibilities, 2015
| https://www.youtube.com/watch?v=4oxCqR_DVNQ
| 2015.08.11
| All
| All
| Hardware
| Introduction
| All
| All
| n/a
|-
|-
! [[File:n4QwiuQtjO0.png|200px]]
! [[File:n4QwiuQtjO0.png|200px|link=https://www.youtube.com/watch?v=n4QwiuQtjO0]]
| Updating to Repetrel 2 4xx
| Updating to Repetrel 2 4xx
| https://www.youtube.com/watch?v=n4QwiuQtjO0
| Any
| 2015.08.06
| All
| Software
| Software
| Instruction
| n/a
| n/a
|-
|-
! [[File:cFAFRkpLmww.png|200px]]
! [[File:cFAFRkpLmww.png|200px|link=https://www.youtube.com/watch?v=cFAFRkpLmww]]
| Updating your 407 Motion Controller
| Updating your 407 Motion Controller
| https://www.youtube.com/watch?v=cFAFRkpLmww
| 2015.07.24
| All
| All
| Software
| Software
| Instruction
| n/a
| n/a
|-
|-
! [[File:XKCEkKSolZc.png|200px]]
! [[File:XKCEkKSolZc.png|200px|link=https://www.youtube.com/watch?v=XKCEkKSolZc]]
| Replacing the HOTHEAD controller
| Replacing the HOTHEAD controller
| https://www.youtube.com/watch?v=XKCEkKSolZc
| Any
| 2015.07.23
| Any
| All
| Hardware
| Instruction
| n/a
| n/a
|-
|-
! [[File:YM8QMZBTb4o.png|200px]]
! [[File:YM8QMZBTb4o.png|200px|link=https://www.youtube.com/watch?v=yM8QMZBTb4o]]
| Programming the HOTBED controller on the System 30M and ESR
| Programming the HOTBED controller on the System 30M and ESR
| https://www.youtube.com/watch?v=yM8QMZBTb4o
| 30M, ESR
| 2015.07.22
| All
| Software
| Software
| Instruction
| n/a
| n/a
|-
|-
! [[File:0gFX6Mh-ths.png|200px]]
! [[File:CuRcIE-Jbyc.jpg|200px|link=https://www.youtube.com/watch?v=cuRcIE-Jbyc]]
| Printing with Cloning - three heads in Parallel
| Any
| Any
|-
! [[File:VMyS3h4qiSA.jpg|200px|link=https://www.youtube.com/watch?v=VMyS3h4qiSA]]
| Older Instructions, Slicing for Multiple Head Support
| printer
| head
|-
! [[File:0gFX6Mh-ths.png|200px|link=https://www.youtube.com/watch?v=0gFX6Mh-ths]]
| Leveling the X-Arm on System 30M, Engine SR
| Leveling the X-Arm on System 30M, Engine SR
| https://www.youtube.com/watch?v=0gFX6Mh-ths
| 30M, ESR
| 2015.06.02
| Maintenance
| System 30M, Engine SR
| Hardware
| Instruction
| n/a
| n/a
|-
|-
! [[File:LZd0ecogGlQ.png|200px]]
! [[File:LZd0ecogGlQ.png|200px|link=https://www.youtube.com/watch?v=LZd0ecogGlQ]]
| Correcting Y-Arm Flexation Fix on the System 30M, Engine SR
| Correcting Y-Arm Flexation Fix on the System 30M, Engine SR
| https://www.youtube.com/watch?v=LZd0ecogGlQ
| 30M, ESR
| 2015.03.18
| Maintenance
| System 30M, Engine SR
| Hardware
| Instruction
| n/a
| n/a
|-
|-
! [[File:ArDX4UpflmE.png|200px]]
! [[File:ArDX4UpflmE.png|200px|link=https://www.youtube.com/watch?v=ArDX4UpflmE]]
| Manually Setting the Z-Zero Position
| Manually Setting the Z-Zero Position
| https://www.youtube.com/watch?v=ArDX4UpflmE
| Any
| 2015.03.09
| Setup
| System 30M, Engine SR
| Hardware
| Instruction
| n/a
| n/a
|-
|-
! [[File:vc9gBZtUL7c.png|200px]]
! [[File:vc9gBZtUL7c.png|200px|link=https://www.youtube.com/watch?v=vc9gBZtUL7c]]
| Picking Right 3D Printer For You
| Picking Right 3D Printer For You
| https://www.youtube.com/watch?v=vc9gBZtUL7c
| 2015.02.08
| All
| All
| Hardware
| Overview
| All
| All
| n/a
|-
|-
! [[File:66S9XJ-KeU8.png|200px]]
! [[File:66S9XJ-KeU8.png|200px|link=https://www.youtube.com/watch?v=66S9XJ-KeU8]]
| Changing the Main I/O Board, System 30M, EHR, ESR
| Changing the Main I/O Board, System 30M, ESR
| https://www.youtube.com/watch?v=66S9XJ-KeU8
| 30M, ESR
| 2015.02.12
| Maintenance
| All
| Hardware
| Overview
| All
| n/a
|-
|-
! [[File:YEePz8_0ttc.png|200px]]
! [[File:YEePz8_0ttc.png|200px|link=https://www.youtube.com/watch?v=yEePz8_0ttc]]
| Laser Test Print
| Laser Test Print
| https://www.youtube.com/watch?v=yEePz8_0ttc
| Any
| 2015.02.17
| Lasers
| All
| Hardware
| Demonstration
| LA5-808 Diode Laser
| n/a
|-
|-
! [[File:tLHpaePTP-k.png|200px]]
! [[File:tLHpaePTP-k.png|200px|link=https://www.youtube.com/watch?v=tLHpaePTP-k]]
| EMO Series Printing Tips
| EMO Series Printing Tips
| https://www.youtube.com/watch?v=tLHpaePTP-k
| Any
| 2015.02.10
| Reservoirs
| All
| Hardware
| Instruction
| EMO Series (EMO, COD, VOL, VCD, KRA, KCD, KR2, KC2)
| n/a
|-
|-
! [[File:Zl1sqy6PWx8.jpg|200px]]
! [[File:Zl1sqy6PWx8.jpg|200px|link=https://www.youtube.com/watch?v=Zl1sqy6PWx8]]
| Changing Power Supplies in the 30M and ESR
| Changing Power Supplies in the 30M and ESR
| https://www.youtube.com/watch?v=Zl1sqy6PWx8
| 2015.02.04
| 30M, ESR
| 30M, ESR
| Hardware
| Maintenance
| Instruction
| Any
| n/a
|-
|-
! [[File:IQscrgv6uaQ.png|200px]]
! [[File:IQscrgv6uaQ.png|200px|link=https://www.youtube.com/watch?v=IQscrgv6uaQ]]
| Multi-Head Calibration Guide
| Multi-Head Calibration Guide
| https://www.youtube.com/watch?v=IQscrgv6uaQ
| 2015.02.03
| Any
| Any
| Hardware/Software
| Setup
| Instruction
| Any
| n/a
|-
|-
! [[File:0lpa4nENtyQ.png|200px]]
! [[File:0lpa4nENtyQ.png|200px|link=https://www.youtube.com/watch?v=0lpa4nENtyQ]]
| LA5-808 "Shark V" Diode Laser
| LA5-808 "Shark V" Diode Laser
| https://www.youtube.com/watch?v=0lpa4nENtyQ
| 2015.01.14
| Any
| Any
| Hardware
| Lasers
| Introduction
| LA5-808
| n/a
|-
|-
! [[File:mPYPWjnDGho.png|200px]]
! [[File:mPYPWjnDGho.png|200px|link=https://www.youtube.com/watch?v=mPYPWjnDGho]]
| Luer Tip Kit for EMO and SDS Series Print Heads
| Luer Tip Kit for EMO and SDS Series Print Heads
| https://www.youtube.com/watch?v=mPYPWjnDGho
| 2014.12.23
| Any
| Any
| Hardware
| Reservoirs
| Introduction
| LTK
| n/a
|-
|-
! [[File:-VHxf182fIs.png|200px]]
! [[File:-VHxf182fIs.png|200px|link=https://www.youtube.com/watch?v=-VHxf182fIs]]
| Print Head SDK
| Print Head SDK
| https://www.youtube.com/watch?v=-VHxf182fIs
| Any
| 2014.12.09
| New!
| All
| Hardware, Software
| Introduction
| SDK
| n/a
|-
|-
! [[File:Fg9omXlYR-Q.png|200px]]
! [[File:Fg9omXlYR-Q.png|200px|link=https://www.youtube.com/watch?v=Fg9omXlYR-Q]]
| MK Series Printing Tips
| MK Series Printing Tips
| https://www.youtube.com/watch?v=Fg9omXlYR-Q
| Any
| 2014.11.12
| Filaments
| All
| Procedure
| Instruction
| MK Series
| n/a
|-
|-
! [[File:EosKDe-SyUI.png|200px]]
! [[File:EosKDe-SyUI.png|200px|link=https://www.youtube.com/watch?v=EosKDe-SyUI]]
| Replacing fuses (old) on the Yoke
| Replacing fuses (old) on the Yoke
| https://www.youtube.com/watch?v=EosKDe-SyUI
| Any
| 2014.08.27
| Maintenance
| ALL
| Hardware
| Instruction
| All
| n/a
|-
|-
! [[File:4yuzpUqeE-Y.png|200px]]
! [[File:4yuzpUqeE-Y.png|200px|link=https://www.youtube.com/watch?v=4yuzpUqeE-Y]]
| Loading the EMO-type Reservoirs
| Loading the EMO-type Reservoirs
| https://www.youtube.com/watch?v=4yuzpUqeE-Y
| Any
| 2014.04.23
| Reservoirs
| ALL
| Hardware
| Instruction
| EMO, COD, VOL, VCD, KRA, KCD, KR2, KC2
| n/a
|-
|-
! [[File:xQFacnpzmv0.png|200px]]
! [[File:xQFacnpzmv0.png|200px|link=https://www.youtube.com/watch?v=xQFacnpzmv0]]
| Changing the Economics of 3D Printing
| Changing the Economics of 3D Printing
| https://www.youtube.com/watch?v=xQFacnpzmv0
| Any
| 2013.12.24
| Any
| All
| Hardware
| Demonstration
| n/a
| n/a
|-
|-
! [[File:c9HvQ3SepoM.png|200px]]
! [[File:c9HvQ3SepoM.png|200px|link=https://www.youtube.com/watch?v=c9HvQ3SepoM]]
| System 30 Product Release
| System 30M Product Release
| https://www.youtube.com/watch?v=c9HvQ3SepoM
| 30M
| 2013.10.29
| System 30
| Hardware, Software
| Introduction
| Introduction
| n/a
| n/a
|-
|-
! [[File:P6aMBQSZPgg.png|200px]]
! [[File:P6aMBQSZPgg.png|200px|link=https://www.youtube.com/watch?v=P6aMBQSZPgg]]
| Simultaneous 3D Printing of Multiple Parts
| Simultaneous 3D Printing of Multiple Parts
| https://www.youtube.com/watch?v=P6aMBQSZPgg
| Any
| 2013.07.02
| Any
| All
| Hardware, Software
| Demonstration
| MK1-250
| n/a
|-
|-
! [[File:nuii5rP53Js.png|200px]]
! [[File:nuii5rP53Js.png|200px|link=https://www.youtube.com/watch?v=nuii5rP53Js]]
| 3D Printing with Sugru The Amazing Self-Setting Rubber
| 3D Printing with Sugru The Amazing Self-Setting Rubber
| https://www.youtube.com/watch?v=nuii5rP53Js
| 2013.06.19
| Any
| Any
| Hardware
| Reservoirs
| Demonstration
| EMO-25
| n/a
|-
|-
! [[File:dihvAQR7LQg.png|200px]]
! [[File:dihvAQR7LQg.png|200px|link=https://www.youtube.com/watch?v=dihvAQR7LQg]]
| 3D Printing with Play-Doh
| 3D Printing with Play-Doh
| https://www.youtube.com/watch?v=dihvAQR7LQg
| Any
| 2013.06.04
| Reservoirs
| All
| Hardware
| Demonstration
| EMO-25
| n/a
|-
|-
! [[File:cw8XiW46G0k.png|200px]]
! [[File:cw8XiW46G0k.png|200px|link=https://www.youtube.com/watch?v=cw8XiW46G0k]]
| 3D Printing with Plasticine
| 3D Printing with Plasticine
| https://www.youtube.com/watch?v=cw8XiW46G0k
| 2013.04.13
| Any
| Any
| Hardware
| Reservoirs
| Demonstration
| EMO-25
| n/a
|-
|-
! [[File:trdz4YDbdsw.png|200px]]
! [[File:trdz4YDbdsw.png|200px|link=https://www.youtube.com/watch?v=trdz4YDbdsw]]
| 3D Printing with Air-Dry Modeling Clay
| 3D Printing with Air-Dry Modeling Clay
| https://www.youtube.com/watch?v=trdz4YDbdsw
| 2013.04.06
| Any
| Any
| Hardware
| Reservoirs
| Demonstration
| EMO-25
| n/a
|-
|-
! [[File:XNwv7Dw_Zwg.png|200px]]
! [[File:XNwv7Dw_Zwg.png|200px|link=https://www.youtube.com/watch?v=XNwv7Dw_Zwg]]
| Interchangeable Hot-Swappable Heads
| Interchangeable Hot-Swappable Heads
| https://www.youtube.com/watch?v=XNwv7Dw_Zwg
| 2013.05.12
| Any
| Any
| Hardware, Software
| Any
| Demonstration
| MK1-250
| n/a
|-
|-
! [[File:mu9xMmkZFns.png|200px]]
! [[File:mu9xMmkZFns.png|200px|link=https://www.youtube.com/watch?v=mu9xMmkZFns]]
| Thank you, Kickstarters!
| Thank you, Kickstarters!
| https://www.youtube.com/watch?v=mu9xMmkZFns
| Any
| 2012.11.05
| Any
| All
| Hardware, Software
| Thank You
| n/a
| n/a
|-
|-
! [[File:Z9rgkw5r4l4.png|200px]]
! [[File:Z9rgkw5r4l4.png|200px|link=https://www.youtube.com/watch?v=Z9rgkw5r4l4]]
| Quick Tour of our Main Shop!
| Quick Tour of our Main Shop!
| https://www.youtube.com/watch?v=Z9rgkw5r4l4
| Any
| 2012.10.17
| Any
| All
|-
| Introduction
| Thank You
| n/a
| n/a
|}
|}

Latest revision as of 12:52, 29 October 2024

Table of Videos

Please also see:

Remember, you can CTRL+F to search for a keyword on this page! You can also click on a column header to sort by that column.

Note:

The following chart compares and contrasts the various printers:

https://hyrel3d.com/wiki/index.php/Printer_Overview

The following chart compares and contrasts the various heads:

https://hyrel3d.com/wiki/index.php/Head_Overview

Count

299 videos as of June 2024.

Table of Video Links, 2024
Video Link Subject Printer Model Head / Activity
Table of Video Links, 2024
Video Link Subject Printer Model Head / Activity
1vCTKK65RPQ.jpg Setting up the Hyrel 3D H21 to print PEI (Ultem) in the Heated Chamber (up to 150C) H21 FH2-450
UI7UeOIduAEx.jpg Hyrel 3D H21 Heated Chamber (up to 150C) Instructions H21 FH2-450
WH6H3DnNjJk.jpg Tuskegee University prints on Hydra 21 H21 FH2-260
AHROiw0INxo.jpg Surface Mapping Configuration on Hyrel 3D Software H21 Probe
200px Slicing a DXF to etch with a Hyrel 3D Diode Laser Any Lasers
200px Hyrel3D: HEATED Small Volume Mixing Kit (SVMK) setup Any Reservoir
200px Hyrel 3D: Dual RSD instructions Any Reservoir

279 videos as of Oct 2022

2023 (1)

Table of Video Links, 2021
Video Link Subject Printer Model Head / Activity
200px New-style Pick-and-Place Head Introduction H21 PNP

2022 (23)

Table of Video Links, 2021
Video Link Subject Printer Model Head / Activity
200px Hyrel3D Bioprinting at the Food and Bioengineering Lab of TalTech, Estonia EHR Printing
200px Additional Setup for new printers All n/a
200px Technical University of Denmark printing on a Hyrel 3D Printer ESR Printing
200px Creating Text Objects with Repetrel All n/a
200px New Small Volume Mixing Kit Any SVMK, Microfluidics
200px Integrating MATLAB with Repetrel Any Any
200px Adjusting to avoid Elephant Foot with PCL and similar materials Any KR2, TAM
200px Hyrel head lowering attachment Any Any
200px Cleaning residue from the HIgh Torque KR2 cartridge Any HTK
200px Scaling your print with the Hyrel Microscope Any Microscope
200px Cleaning PCL, PLA, or PDO residue the Hyrel HTK cartridge of the KR2 head. Any Cleanup
200px Using head offsets to change tool positions while leaving the output in the same location Any Calibration
200px Demo setup and test: Pick-and-Place H21 Configuration
200px EHR Position Adjustment EHR Calibration
200px Analyzing and calculating the porosity of scaffolds - Hyrel 3D Any Scaffolds
200px Replacing big tree board on Z motor on Hydra 21. H21 Maintenance
200px How to prepare powdered material for use in Hyrel 3D's heated syringe heads. All Bio
200px How to level the build platform on the new Hyrel 3D Hydra 21 printer. H21 Maintenance
200px How to measure the scale of biological scaffold prints. All Bio
200px How to melt and print with PCL pellets with the Hyrel KR2 head. All Bio
200px How to remove PCL scaffolds from PVC build surface. All Bio
200px Hydra 21 Unboxing Instructions H21 All
200px Cirles, Arcs, Spirals, and Helixes: Hyrel's G2 and G3 gcode generation tool All All


2021 (44)

Table of Video Links, 2020
Video Link Subject Printer Model Head / Activity
200px Scaffolds: Adjusting the flow value (P/uL) All All
200px Scaffolds: Adjusting the final retract (unprime) All All
200px Scaffold Gradient: Speed and Z position Instructions All All
200px Scaffold Gradient: Speed Instructions All All
200px Scaffold Perimeters Tool All All
200px Customizing Visualization in Repetrel All All
200px Biogel Scaffold Speed Test All All
200px Programming BigTree Drivers for Hyrel Printers All Flashing
200px Using a USB Camera with Repetrel All Camera
link=https://www.youtube.com/watch?v=mqdefault_6s (1)-1 Heated Nozzle Accessory All Reservoirs
200px Scaffold Options in Repetrel All All
200px Cleaning the Hyrel 3D DMH-2 Dynamic Mixing Head All Reservoir
200px Calibrating Head Offsets for Hyrel 3D All All
200px Hyrel 3D "Return Trip" Option for Scaffolds All Zebra Prints
200px Hyrel 3D Viscosity Test Clean Up All Reservoir
Mqdefault 6s (1)-1.jpg Hyrel 3D's Coaxial Extrusion Head with Nozzle Heater All Reservoir
P28Y7NNT3DQ.png Configuring "Zebra" prints in Repetrel on Hyrel 3D Printers All Zebra Prints
DX1fBX51XNI.png Designing Scaffolds in Repetrel All Scaffolds
St6nehNLTdc.png Resolving a stuck plunger in a Hyrel 3D reservoir head All Reservoir
AtQuLaYVGzA.png Hyrel 3D Announces Polar Printing for Extreme Environments! Polar All
ADqB1DjM9Ug.png Eliminating air bubbles in a Hydrogel All Reservoir
MbyRncFmpyg.png Cleaning Hyrel 3D's DMH-2 Dynamic Mixing Head All DMH-2
JvenAK33OmI.png How to echo gcode commands to the display All Usage
Hd4iq3HR9c8.png Removing PCL Prints Faster and Easier All PCL
Hcxd5uonkxE.png Overview of the Hyrel 3D "Quiet Storm" Additional Cooling Fan All Quiet Storm
V5cKuYY1PAw.png Preparation and Setup for Printing PCL (polycaprolactone) All PCL
7ozTI eiFqk.png Choosing and Specifying Parameters for Rectangular Infill Scaffolds All Scaffolds
Dfm8RYyzmas.png Choosing and Specifying Parameters for Gyroid Infill PCL Scaffolds All Scaffolds
ASy9HIwz04Q.png Showing the Effects of Cooling while Printing All Cooling
A4bXqRb5-q8.png How to manage Accessory Manuals in Repetrel All Usage
EXMxgF-Yf1o.png Saving, Naming and Reusing Scaffolds All Scaffolds
3H-gJNUDncA.png How to work with our Heated Nozzle Accessory All Heated Nozzles
DXjh36CcRAw.png Using Filters to refine SurferBuddy search results All SurferBuddy
JQCcelqLoQE.png How to Export SurferBuddy Files to External Drive 1 All SurferBuddy
EqoyARWTTLo.png Using Parameter Profiles in Repetrel All Parameter Profiles
NbfntNBKSIg.png How to Export GCODE from Repetrel All Usage
5lYDLhbnQxE.png Using offsets to repeat a job in different locations All Offsets
3tRDj7y54SU.png Custom screeding attachment for the Hyrel Hydra 16A Calibration
200px Hyrel Nozzle Heater for Reservoir Heads All Reservoir
Qqh2Y0Wg9HA.png Unboxing the Hyrel EHR for electro-spinning or melt-electro-writing (MEW) EHR Setup
Calibrate.png Calibrating Travel on the EHR EHR Calibration
Unpack.png Unpacking and Setting Up the EHR EHR Setup
VjZlZkBt130.png How to check if your CO2 Laser is working Hydra Lasers
SDqVHXZxrBI.png Etching Aluminum with 450 nm Diode Laser any Lasers
9BKE469eL0M.png Heated and Chilled Vacuum Bed (HCVB) EHR, 16A Reservoir

2020 (30)

Table of Video Links, 2020
Video Link Subject Printer Model Head / Activity
NW-O76oAlu4.png The Hyrel Hydra Electrical Panel, Explained 16A Overview
SF7UoogD-mg.png Making DXFs from Camera Images All Lasers
https://www.youtube.com/watch?v=_Mr7qEBgu8M Viscotec Vipro HEAD-3 on Hyrel All Viscotec
LajxuYqTw6o.png Explaining the NEW RSD-30 All Reservoirs
IbdUwZyZm3I.png Making DXFs from CAD Models All Lasers
1Rtktf-HeTU.png 4th/5th Axis Installation and Setup 16A All
H8XnGKBEJCc.png 3-Phase Spindle Tool Installation and Setup 16A Spindles
JW1-uhvZ5wM.png Clench/Pinch Valve Installation and Setup All Reservoirs
X7J4pTeSq8A.png Dynamic Mixing Head (DMH) Installation and Setup All Reservoirs
Dlta7KSt3bE.png EHR Electronics Access EHR Overview
H0pAYAraO0Q.png ESR Unboxing and Setup ESR Setup
DgfeoLZNW6c.png RSD-30 Refrigerated Syringe Dispenser All Reservoirs
ILEvP8p JGo.png Printing on PEI All Filaments
7lwJvyBso1k.png Printing Cememtitious Materials at TN Tech All Reservoirs
PX9KFUrSPVk.png Tightening set screws for Hydra X-axis 16A Maintenance
MOexKcvpcEY.png Interview on GA Mfg News All All
R7UimNDjNiY.png Hyrel V4 Install No. 9: Licensing All All
0CMH61RtSjk.png Hyrel V4 Install No. 8: Recipes All All
N1HZOvWKqs8.png Hyrel V4 Install No. 7: Settings All All
9qbUzZM3vtg.png Hyrel V4 Install No. 6`: Firmware All All
-JN 0iLTOk4.png Hyrel V4 Install No. 5: Drivers All All
2BVzTR7ij5Y.png Hyrel V4 Install No. 4: Repetrel All All
-Dp-4 NdYm8.png Hyrel V4 Install No. 3: Adobe Reader All All
VH3Fv6jkA54.png Hyrel V4 Install No. 2: Ecosystem Apps All All
OpM-RcDuM5c.png Hyrel V4 Install No. 1: Winrar All All
MdNsQnHy4dQ.png Hydra 16AT - Tall 16A All
Zh-x9ugJ5nE.png Hyrel Bulk Feeder for Cementitious Materials 16A Reservoirs
RW7h9z5DW5A.png Using the new Precision Tool Setter on a Hyrel 3D Printer 16A All
E7tQN 63hcc.png How to Dial In the Prime and Unprime Settings All All
TlnVUBryBg0.png Installing a Second Yoke on a Hyrel Hydra 16A All

2019 (21)

Table of Video Links, 2019
Video Link Subject Printer Model Head / Activity
S3qw8dAWeNo.png RSD-30 - Refrigerated Syringe Dispenser All Reservoirs
RAkjF9nLy4M.png Heated & Chilled Vacuum Bed 16A, EHR Reservoirs
Gl3mbw88fmo.png 4th Axis Fun - Linear and Rotary Printing 16A All
VVhH8hc3olc.png CO2 Laser - Installation Instructions 16A Lasers
SVC5W DdQ9E.png Dynamic Mixing Head DMH All Reservoirs
4oqPbfdD8O0.png Configuring Prusa Slicer for Multi-Material Support All Filaments
DDwGcDgOOQs.png Configuring the Prusa Slicer for Breakaway Support Material All Filaments
CW77WBv3x0Q.png How to Load Filament into a Hyrel 3D Print Head All Filaments
EMfkmXFuPd0.png Loading Print Heads into your Hyrel 3D Printer All All
XC1zLqYkKsc.png How to Calibrate the Z-Zero Position 16A, 30M, ESR All
0Apq3tlila8.png Revised 2019: Hyrel 30M Initial Setup 30M All
0MFtqhM6ZKM.png How to select a Build Surface All Filaments
-4LuhNfbMAo.png How to Tram (level) the Hydra Bed 16A All
C5-NYk06NVc.png Laser Marking on a Cylinder All Lasers
PjqDXXPjI4w.png Five Axis Machining in Brass on a Hyrel Hydra 16A Spindle
KmkGR7u5D58.png Configuring your Hydra for a 3-phase Spindle Tool 16A Spindle
B0lvN-aPYHI.png Five Axis Machining on a Hyrel Hydra
(this gcode was used) 		16A Spindle
CmBaHHAfbEo.png Dispensing RTV Silicone on a Hyrel Hydra All Reservoirs
G526vFi8yWI.png Machining PTFE (Teflon) on a Hyrel Hydra 16A Spindle
LfmssRdZwuE.jpg Rotating Head Prototype 16A Filaments
YhoMTLGVAbc.png Re-aligning the Gantry on the Hyrel Hydra 16A 16A All

2018 (12)

Table of Video Links, 2018
Video Link Subject Printer Model Head / Activity
CbxB96oZFGE.jpg Installing the new laser Power Supply in a Hyrel Hydra 16A All
KrwOviaCZuw.jpg Hyrel Tapping Enabled 16A Spindle
QuIM9XSYMxE.jpg Light Duty Milling with 3-Phase Spindle on a Hyrel Hydra 16A Spindle
Ni56OFo1VvM.jpg Improved UV Light Source for more Powerful Crosslinking All Reservoirs
68oktmbp8r0.png How to install 4th and 5th Axes on a Hyrel Hydra 16A All
7DcqbBzs-ZQ.png How to use an additional Yoke on a Hyrel Hydra 16A All
VerQRjS3iWE.png How to install an additional Yoke on a Hyrel Hydra 16A All
JSTmzuuMYvc.png The Filament Dryer All Filaments
LNURH2fRbY0.jpg Fourth and Fifth Axes Demo on a Hyrel Hydra 16A All
9R6OUMvb.jpg Installing a fourth axis on a Hyrel Hydra 16A All
2QqwfsKgzuQ.jpg Machining hotbeds to under 0.001" 16A All
O1xmXCdj1xE.png Setting the Z-Offset on the EHR EHR All

2017 (45)

Table of Video Links, 2017
Video Link Subject Printer Model Head / Activity
KqnjlTSg-20.jpg CO2 Laser Marking with the Hydra 16A Lasers
FnYDoNkgOrI.jpg Converting a Hydra from Printer to Laser 16A Lasers
FHqTlcdISIg.jpg Cutting Nylon Mesh with CO2 Laser on a Hydra 16A Lasers
NTejDT1B6uQ.jpg Chamber Temperature in a Cold Room 16A Filaments
4Y9V6RWhKj4.jpg Cutting acrylic with the CO2 Laser 16A Lasers
DkMtzPDtIQY.jpg Tiny Heated Chilled Bed Preview EHR Reservoirs
GdvyT8HoaOw.jpg Fourth Axis Rotary Print 16A Filaments
3nKqwcXcEgY.png Additive Manufacturing of Toroid Inductor for Electronics Applications 30M, ESR Reservoirs
Az7V1FSRJfs.jpg Hyrel Hydra X and Y Belt Tension Adjustments 16A Maintenance
SyMB5063J5E.jpg Hyrel Hydra Linear Bearing Adjustments 16A Maintenance
ZEsnegXhpLw.jpg Hyrel Hydra Z Belt Tension Adjustments 16A Maintenance
WNr59eCGuK4.png Changing the Address Resistor on the CO2 Laser 16A Maintenance
QBBxkx40H8s.png CO2 Laser Alignment 16A Calibration
YiizFlScq9Q.png Hydra Yoke Adjustment 16A Maintenance
CbiCnP YEbA.png Hydra Yoke Angle Adjustment 16A Maintenance
XMsXzGPHjng.png Engnie, High Resolution (EHR) Setup, Part 2 EHR Setup
NbWgw9KY6Ic.png Engnie, High Resolution (EHR) Setup, Part 1 EHR Setup
UC7acwIkKmQ.png EHR Scaffold Instructions EHR Setup
B1x2dvdYkTE.png EHR Scaffold Intro EHR Setup
OisWKujfXAI.png Unclogging a rare clogged MK1-250 All Filaments
6FQJuhd2Lxo.png Unclogging a rare clogged MK1-450 All Filaments
WrImt7 Pnxo.png Flashing Firmware on the Modified CO2 Laser Controller 16A Maintenance
1J5bqvcV3Rs.png The Hyrel Hydra Family 16A All
CF7eRdFuZYQ.png High Resolution Engine Vacuum Bed EHR Reservoirs
EltjeQ6KerM.png High Resolution Engine Setup EHR Setup
SvX4gKqAQDI.png SDS Clench Valve Assembly Instructions All Reservoirs
Mz5J8jsb6D4.png How to Load the SDS Clench Valve All Reservoirs
JwKq8 tahYA.png EHR Accuracy Test EHR Calibration
Udbu Zuh8k0.png Hydra 16A Controls Overview 16A All
CClPqIJwhLs.png Using Low Temperature Solder Paste to connect a Flat Flex Cable 30M, ESR Assembly
GCzPw4FOG8c.png Draining Laser Coolant on the Hyrel Hydra 16A Lasers
PPtGSwyS140.png Hydra Home Calibration Details 16A Calibration
LLIWqTRBhTo.png Replacing the top component on an SDS Head Assembly 16A Setup
QxbtI034omk.png HYDRA Hot Bed Installation 16A Setup
FuLCsqfAX3E.png Hydra Model Startup All Reservoirs
LhnV9H7LV9g.png Unboxing the Hydra Floor Model Units 16A Setup
ULpn18OqD-U.png Hydra Overview by CTO Karl Gifford 16A All
QEfskyU7LJ4.png How to Manage the Pick-and-Place with Repetrel Software 16A Pick-and-Place
Jz3onGdmW1c.png Hyrel Hydra Versitility 16A All
PKkrd4R 54Y.png Hydra Vinyl Cutter Overview 16A Cutting
HaKWeCbXkMI.png Hyrel 3D Hydra Pick-and-Place Introduction 16A Pick-and-Place
UACoqtNbXE0.png The Hyrel3D Hydra Line 16A All
KAoSS-Z-aeY.png Tramming the bed on the 16A 16A Maintenance
TibkVZB n9c.png The Benefits of Microscope Inspection During Printing All Microscopes
AR4d-2BZj Y.png Printing PLGA for internal Biological Applications All Reservoirs

2016 (60)

Table of Video Links, 2016
Video Link Subject Printer Model Head / Activity
Z4IGQ5JMP6g.png Varialble Width Conductive Paste Extrusion Any Reservoirs
2f5FEhVsqy8.png Microscope Print View Setup Any Microscope
D2sWEYRVAII.png Replacing the LED Strip 30M Maintenance
14ynZ3DHzVg.png Replacing the Front Switch Panel 30M Maintenance
DQj6oLfrbLo.png Static Mixing Head (SMH) Explained - v2 Including SDS Heads Any Reservoirs
VJXnB-8JII.png Hot Bed Manufacturing Hydra Manufacturing
3azICOBuHdk.png Static Mixing Head (SMH) Explained Any Reservoirs
6qJ-2uFt- Y.png Timelapse Recording Any Recording
ROpcvqS r8s.png HotHead LEDs Explained Any Any
Tz6mRSkOaSk.png LA6-450 and LA5-808 Laser Overview Any Lasers
H95IurET7UM.png SDS and CSD Overview Any Reservoirs
4B9hoMLNOuQ.png Quiet Storm Cooling Fan Overview Any Filaments
9 onCKhT dg.png VOL-25 and VCD-25 Overview Any Reservoirs
QD2FrZ4kg1g.png KRA-15 and KCD-15 Overview Any Reservoirs
Rc2UFwjUtc4.png Hydra 640 (16A) Two Part Test Print Hydra Filaments
Ql1NZLWVJQM.png Extrusion Prototype Print Any Filaments
KtK256u0sN8.png EMO-25 and COD-25 Overview Any Reservoirs
Vn8jnvwh5to.png Session 3C Slicing for Multiple Head Support Any Slicing
P1Ihd4ETxhg.png Session 3A - Setting Two Heads to Z-Zero Any Setup
FCuSvQm6ej4.png Session 3B - Calibrating the Offset Between Two Heads Any Setup
DkQpsJWRI4Y.png Session 2D - Editing Slic3r Recipes Any Slicing
KJc9sNlV0fA.png Session 2E - Slicing your STL and Viewing your GCODE Any Slicing
IQbgGwiGVZA.png Session 2C - Positioning, Scaling, and Rotating your STL Any Slicing
MVyCq7CPGLg.png Session 1A - Hardware and Software Overview Any Overview
2tIHw JIQAI.png Session 1B - Communications and Bed Leveling 30M, ESR Setup
LFATCfKJf4I.png Session 1C - Printing with Plasticine Any Reservoirs
2yHRuef29L4.png Session 2A: Simple CAD Modeling in FreeCAD Any Software
RlJqdhtpB6Q.png PC to Printer Connectivity Any Setup
C88ni0huwhw.png Using the Spindle Tool to rework Circuit Boards Any Spindle
KIGeQmXNbNE.png Running a FADAL CNC on Hyrel3D Circuitry, Firmware and Software n/a Manufacturing
ImMo3V1D70w.png Table Arm (X-Arm) Block Adjustment 30M, ESR Maintenance
YaCYFmoIESk.png MK1-250 Overview Any Filaments
UvZMecXsHEM.png MK1-450 Overview Any Filaments
SOGKeU3vLbs.png MK2-250 Overview Any Filaments
FkJT3ILlAHw.png Replacing the 30M/ESR Heated Build Platform 30M, ESR Maintenance
3KwJ6OgOx14.png Multi Head Printing - Nested STLs Any Software
4GYWfMrs0F8.png X-Axis Belt Tightening 30M, ESR Maintenance
IkgviAGep-c.png Y-Axis Belt Tightening 30M, ESR Maintenance
LQy25Nlj3 Q.png Plasma Magnetic Vortex Deposition (ElectroSpinning) EHR Electro (Melt) Spinning
LQb5vS97jFo.png 3D Milling on the Hydra Series Hydra Spindle
81sVBZOOcbw.png Introducing the Hydra 640 (formerly Model 16A) Hydra Overview
UPqr4S0WC3Q.png USBB Jumper Instructions Any Setup
Rw2E d-q9bQ.png Size Does Matter Hydra Overview
XGriCCrfkuw.png Print Heads Overview Any All
QMyuKdgiWI4.png Session 2F - Loading and Printing with Filaments, MK-Series Heads Any Filaments
YsO8oAzFwC4.png MK1-250 PEEK Nozzle Assembly Any Filaments
BoHRC9m5nlQ.png New Hydra Printer Line Intro Hydra Overview
XREWb Md5o0.png Bioplotting for under $10K EHR Introduction
9zxxBYbdlOE.png Programming Head Offsets Any Setup
NfIvS50zLyc.png Slicing for a Two-Material Print Any Slicing
0dS3bC0BnRQ.png Loading Filament and Printing with the Hyrel3D MK2-250 Any Filaments
V2ifSlZ0qEw.png Loading Filament and Printing with the Hyrel3D MK1-250 Any Filaments
Q-DbAbNMW48.png Loading and Printing with the EMO-25 Print Head Any Reservoirs
Ej55bZXrltA.png SDS RTV Instructions, v2 Any Reservoirs
MwrhV74NjCQ.png Intro to Hyrel Possibilities - Jan 2016 All Overview
V zCytnGvvo.png MK2-250 Dual Drive for Flexible Filaments Any Filaments
O1IGa-8y9yQ.png 6w, 450nm Laser Test Any Lasers
0JJp7HeK35M.png SDS RTV Instructions, v1 Any Reservoirs
XKHa1CXnSdI.png Introducing the SDS Print Heads Any SDS
BlSGlOpyipI.png Sneak Peek: Pick and Place Prototype Hydra Pick-and-Place

2012-2015 (42)

Table of Video Links, 2012-2015
Video Link Subject Printer Model Head / Activity
OceUiuTixPA.png LA6-450: 6w, 450nm Diode Laser Head Any Lasers
Vmw0LS f9V0E.png 3D Printing RTV Silicone Any Reservoirs
YWe3TQGgNW0.png Loading the VCD-25 Any Reservoirs
HuJuexTLbYA.png Short Porcelain Print Demo Any Reservoirs
B583I7AlGJI.png Replacing the Tablet Interface Board 30M Maintenance
ZKAzXoJ0q8Y.png 2016 Design Contest Video N/A Contest
YRsyEGHyt3k.png DXF to Laser Gcode Generation Any Setup
Om9cjxMXuxY.png Printing PEEK (PolyEther Ether Ketone) and PC (PolyCarbonate) Any Filaments
IreaoCfQ8mE.png Healing with MeshLab Any Setup
0Aj9WCabPgw.png Postprocessing with a Heat Gun Any Postprocessing
4oxCqR DVNQ.png Introduction to Hyrel 3D Possibilities, 2015 All All
N4QwiuQtjO0.png Updating to Repetrel 2 4xx Any Software
CFAFRkpLmww.png Updating your 407 Motion Controller All Software
XKCEkKSolZc.png Replacing the HOTHEAD controller Any Any
YM8QMZBTb4o.png Programming the HOTBED controller on the System 30M and ESR 30M, ESR Software
CuRcIE-Jbyc.jpg Printing with Cloning - three heads in Parallel Any Any
VMyS3h4qiSA.jpg Older Instructions, Slicing for Multiple Head Support printer head
0gFX6Mh-ths.png Leveling the X-Arm on System 30M, Engine SR 30M, ESR Maintenance
LZd0ecogGlQ.png Correcting Y-Arm Flexation Fix on the System 30M, Engine SR 30M, ESR Maintenance
ArDX4UpflmE.png Manually Setting the Z-Zero Position Any Setup
Vc9gBZtUL7c.png Picking Right 3D Printer For You All All
66S9XJ-KeU8.png Changing the Main I/O Board, System 30M, ESR 30M, ESR Maintenance
YEePz8 0ttc.png Laser Test Print Any Lasers
TLHpaePTP-k.png EMO Series Printing Tips Any Reservoirs
Zl1sqy6PWx8.jpg Changing Power Supplies in the 30M and ESR 30M, ESR Maintenance
IQscrgv6uaQ.png Multi-Head Calibration Guide Any Setup
0lpa4nENtyQ.png LA5-808 "Shark V" Diode Laser Any Lasers
MPYPWjnDGho.png Luer Tip Kit for EMO and SDS Series Print Heads Any Reservoirs
-VHxf182fIs.png Print Head SDK Any New!
Fg9omXlYR-Q.png MK Series Printing Tips Any Filaments
EosKDe-SyUI.png Replacing fuses (old) on the Yoke Any Maintenance
4yuzpUqeE-Y.png Loading the EMO-type Reservoirs Any Reservoirs
XQFacnpzmv0.png Changing the Economics of 3D Printing Any Any
C9HvQ3SepoM.png System 30M Product Release 30M Introduction
P6aMBQSZPgg.png Simultaneous 3D Printing of Multiple Parts Any Any
Nuii5rP53Js.png 3D Printing with Sugru The Amazing Self-Setting Rubber Any Reservoirs
DihvAQR7LQg.png 3D Printing with Play-Doh Any Reservoirs
Cw8XiW46G0k.png 3D Printing with Plasticine Any Reservoirs
Trdz4YDbdsw.png 3D Printing with Air-Dry Modeling Clay Any Reservoirs
XNwv7Dw Zwg.png Interchangeable Hot-Swappable Heads Any Any
Mu9xMmkZFns.png Thank you, Kickstarters! Any Any
Z9rgkw5r4l4.png Quick Tour of our Main Shop! Any Any
Retrieved from "https://hyrel3d.in/wiki/index.php?title=Videos&oldid=6577"