Difference between revisions of "Repetrel Download"

From Hyrel3D
Jump to navigation Jump to search
(update with new repetrel and adobe info)
 
(121 intermediate revisions by 2 users not shown)
Line 4: Line 4:
| __TOC__
| __TOC__
|}
|}
We do encourage all users to be on the latest release. You are welcome to remain on older versions, but we will only be able to provide limited support (and no bug fixes) to older versions. Please consider upgrading to the latest version.


= '''''Everyone is now encouraged to upgrade to version 3.083_C''''' =
'''NOTE: Our environment is intended to be run by the ''HYREL'' user in the operating system, with FULL ADMINISTRATOR rights and privileges, on a windows device running in American English as the native language. If you vary from this, results may be unpredictable.'''


We encourage even 3.x to 3.x upgrades to do a full install, since more than just the executables have been updated.
<span style="color: red;">'''''Please note that version 4 and above require a ($250) license key to operate - see [[Licensing]] for details.'''''</span>


<span style="color: red;">'''''Please note that you should ensure that your ST-Link is working before you attempt this upgrade.'''''</span>


<hr>
<span style="color: red;">'''''Please note that if you cannot perform the upgrade yourself, we charge a $100 service fee to help.'''''</span>


== Upgrade Overview ==


This page has instructions for installing the latest Repetrel software and associated applications, drivers, and environment (including new print head manuals) on a new Windows platform, or over an older install.
As of June, 2021, the new Repetrel installer will also install the prerequisites, so the process is:


<span style="color: red;">These steps should each be done '''''in order,''''' and run '''''as administrator.'''''</span>
In brief:
<br> 1. Repetrel Installer (you are here now)
<br> 2. [[Firmware]]
<br> 3. [[Settings]]
<br> 4. [[Recipes]]
<br> 5. [[Licensing]]


== '''Install WinRAR''' ==
== '''Current Version: 4.2.474''' ==


Go to https://www.rarlab.com/download.htm and install the latest WinRAR to extract our archives.
The recent bugs have been corrected, so please use 4.2.474, linked below.  


== '''Install Ecosystem Apps''' [[File:Download_button.png|150px|link=http://www.hyrel3d.net/downloads/updater/EcosystemApps.exe]] ==
The current (as of 11 Aug 2021) is recommended for all users:
* Repetrel Program '''4.2.474'''
* Motion Controller Firmware '''4.203b''' (lower case L)
* Head/Bed Firmware '''103_4.050f'''


Ecosystem Apps is a suite of publicly available programs which add many features at no cost. Some of them you might use individually to create or modify models. Others might be called from Repetrel to manipulate a file. This install should all be carried out per the instructions below, so that Repetrel will find them in the expected locations.
To find out what version of <span style="color: red;">Repetrel Software</span> you are on now:


# Download http://www.hyrel3d.net/downloads/updater/EcosystemApps.exe - see table below for the list of programs and their proper locations.
[[File:Rep_mc_version_info.png|750px]]
# Run the executable, with the location pointed to <code>C:</code>


== '''Install the latest Adobe Reader''' ==
== '''New Environment''' [[File:Download_button.png|150px|link=http://hyrel3d.com/updates/Repetrel_full_Installer_4.2.476.exe]] ==


Go to https://get.adobe.com/reader/ and install the latest version of Adobe Reader. Yes, you need to do this, as we have an embedded pdf viewer. Note that you can opt out of the other software Adobe will try to give you.
This download has it all - Repetrel, firmware, manuals, recipes, AND the Ecosystem Apps setup to install prerequisites. Use this to install in a fresh environment.


== '''Install Repetrel''' [[File:Download_button.png|150px|link=http://hyrel3d.net/downloads/repetrel/repetrel_3.083_C--3.082s.rar]] ==
Download the file and run it as Administrator.


This installs the current Repetrel directory, with Repetrel 3.083_C with firmware 3.082s for HYDRA/EHR, 3.082O for 30M/ESR - the latest as of 04 Dec 2018.
== '''Repetrel Install''' [[File:Download_button.png|150px|link=http://hyrel3d.com/updates/Repetrel_Installer_4.2.474.exe]] ==


Just uncompress the file and place it at <code>C:</code>.  
This download includes the latest (see above) complete Repetrel install, from C:\Repetrel on down, including software and firmware for your 407 (30M, ESR) or 429 (16A, EHR) Motion Controller, your 103 Print Head and Hot Bed Controllers, and controllers for the CO2 laser, 3-phase spindle tool, and extra axes.  


Your path to Repetrel.exe should be: <code>C:\Repetrel\bin\Repetrel.exe</code> (capitalization may differ).
Download the file and run it as Administrator.


== '''Install Drivers''' ==
As there have been some file location changes recently, we recommend renaming your old repetrel folder (perhaps to repetrel_something) and then doing this complete Repetrel install.


Note: This step is only required for new installs.  
== '''Repetrel Update''' [[File:Download_button.png|150px|link=http://hyrel3d.com/updates/Repetrel_Installer_4.2.474_light.exe]] ==


Next, navigate to <code>C:\Repetrel\bin\_RUN_ME_ON_NEW_INSTALL</code> and execute each numbered file AS ADMINSTRATOR, IN ORDER:
This download ONLY includes the latest (see above) C:\Repetrel\bin directory, including software and firmware for your 407 (30M, ESR) or 429 (16A, EHR) Motion Controller, your 103 Print Head and Hot Bed Controllers, and controllers for the CO2 laser, 3-phase spindle tool, and extra axes.


* <code>1.Windows 8 Compatibility Resolver.bat</code>
Download the file and run it as Administrator.
* <code>2.dpinst_amd64.exe</code>
* <code>3.dpinst_x86.exe</code>
* <code>4.CDM v2.12.00 WHQL Certified.exe</code>
* <code>5.VCP_V1.3.1_Setup_x64.exe</code>
* <code>6.VCP_V1.3.1_Setup.exe</code>
* <code>7.vcredist_ia64.exe</code>
* <code>8.vcredist_x64.exe</code>
* <code>9.vcredist_x86.exe</code>


== '''Configure Slic3r''' ==
This should only be run as an update to an already functioning Repetrel v4.x install.


Note: This step is only required for new installs.
== V3 ==


Next, navigate to <code>C:\Users\hyrel\AppData\Roaming\Slic3r</code> (or whatever the user name is instead of hyrel) and:
For version 3.083_K, please visit [[3_Install]].


* Launch Slicer.exe
== After Repetrel ==
* Go to File > Preferences
* Select '''Expert''' mode and click OK.
* Exit Slicer


== '''Flash Firmware''' ==
Please proceed to steps 5-8 to complete your install or upgrade.
 
Launch Repetrel and follow the instructions at [[Firmware]] to flash the Motion Controller
 
== '''Configure Settings''' ==
 
Within Repetrel, follow the instructions at [[Settings]] -  
 
That should be all there is! Please let me know if you have any questions. -Davo

Latest revision as of 11:59, 19 August 2021

We do encourage all users to be on the latest release. You are welcome to remain on older versions, but we will only be able to provide limited support (and no bug fixes) to older versions. Please consider upgrading to the latest version.

NOTE: Our environment is intended to be run by the HYREL user in the operating system, with FULL ADMINISTRATOR rights and privileges, on a windows device running in American English as the native language. If you vary from this, results may be unpredictable.

Please note that version 4 and above require a ($250) license key to operate - see Licensing for details.

Please note that you should ensure that your ST-Link is working before you attempt this upgrade.

Please note that if you cannot perform the upgrade yourself, we charge a $100 service fee to help.

Upgrade Overview

As of June, 2021, the new Repetrel installer will also install the prerequisites, so the process is:

In brief:
1. Repetrel Installer (you are here now)
2. Firmware
3. Settings
4. Recipes
5. Licensing

Current Version: 4.2.474

The recent bugs have been corrected, so please use 4.2.474, linked below.

The current (as of 11 Aug 2021) is recommended for all users:

  • Repetrel Program 4.2.474
  • Motion Controller Firmware 4.203b (lower case L)
  • Head/Bed Firmware 103_4.050f

To find out what version of Repetrel Software you are on now:

Rep mc version info.png

New Environment Download button.png

This download has it all - Repetrel, firmware, manuals, recipes, AND the Ecosystem Apps setup to install prerequisites. Use this to install in a fresh environment.

Download the file and run it as Administrator.

Repetrel Install Download button.png

This download includes the latest (see above) complete Repetrel install, from C:\Repetrel on down, including software and firmware for your 407 (30M, ESR) or 429 (16A, EHR) Motion Controller, your 103 Print Head and Hot Bed Controllers, and controllers for the CO2 laser, 3-phase spindle tool, and extra axes.

Download the file and run it as Administrator.

As there have been some file location changes recently, we recommend renaming your old repetrel folder (perhaps to repetrel_something) and then doing this complete Repetrel install.

Repetrel Update Download button.png

This download ONLY includes the latest (see above) C:\Repetrel\bin directory, including software and firmware for your 407 (30M, ESR) or 429 (16A, EHR) Motion Controller, your 103 Print Head and Hot Bed Controllers, and controllers for the CO2 laser, 3-phase spindle tool, and extra axes.

Download the file and run it as Administrator.

This should only be run as an update to an already functioning Repetrel v4.x install.

V3

For version 3.083_K, please visit 3_Install.

After Repetrel

Please proceed to steps 5-8 to complete your install or upgrade.

Retrieved from "https://hyrel3d.in/wiki/index.php?title=Repetrel_Download&oldid=6366"