Difference between revisions of "Emulsifiables"

From Hyrel3D
Jump to navigation Jump to search
(Redirected page to Cold and Warm Flow)
 
(61 intermediate revisions by 2 users not shown)
Line 1: Line 1:
[[Category:Settings]]
#REDIRECT [[Cold_and_Warm_Flow]]
[[Category:EMO-25]]
[[Category:EMO-Type]]
{| align="right"
| __TOC__
|}
 
EMO-Type heads are for printing as follows:
 
* With pastes, gels, emulsifiables or waxes.
* At room or elevated temperatures.
* With or without UV Crosslining.
* With Hyrel Nozzles (1.5mm, 2mm) or Luer Tips.
 
These include the following:
 
{| border="1" class="wikitable" style="text-align: center"
|+ EMO-Type Head Comparison
! Temperature
! Ambient
! Up to 100°C
! Up to 150°C
|-
! No Crosslinking
| EMO-25 <br>
SDS-5, -10, -30, -60
| VOL-25
| KRA-15
|-
! With Crosslinking
| COD-25 <br>
CSD-5, -10, -30, -60
| VCD-25
|KCD-15
|}
 
As of 16 Nov, the latest firmware is 32V, included with Repetrel 2.828.
 
Some settings for the EMO-Type heads (like temperature, prime/unprime values) will vary, depending on what material you are printing with. Nozzle diameter should accurately reflect what nozzle you have loaded (1.6mm is default) AND what path width you sliced for. Temperature commands will be ignored by heads with no temperature control. Having said that, here are our default shipping settings:
 
{| class="wikitable" style="text-align: center;"
|+ EMO-Type Head Comparison
! rowspan="2" style="width: 10%" | Settings
! colspan="4" | EMO, VOL, KRA, COD, VCD, KCD Heads (17mm Tubes)
! colspan="4" | SDS, CSD Heads (Various Tube Diameters)
|-
! style="width: 10%" | 19:1 Ratio
! style="width: 10%" | 27:1 Ratio
! style="width: 10%" | 51:1 Ratio
! style="width: 10%" | 100:1 Ratio
! style="width: 10%" | SDS-5
! style="width: 10%" | SDS-10
! style="width: 10%" | SDS-30
! style="width: 10%" | 5SDS-60
|-
!colspan="9"| Material
|-
! Type
| (any)
| (any)
| (any)
| (any)
| (any)
| (any)
| (any)
| (any)
|-
! Color
| (any)
| (any)
| (any)
| (any)
| (any)
| (any)
| (any)
| (any)
|-
! Nozzle
| 1.600
| 1.600
| 1.600
| 1.600
| 1.600
| 1.600
| 1.600
| 1.600
|-
! Layer
| (any)
| (any)
| (any)
| (any)
| (any)
| (any)
| (any)
| (any)
|-
!colspan="9"| Temp Info
|-
! Print Temp
| 30
| 30
| 30
| 30
| 30
| 30
| 30
| 30
|-
! Power Factor
| 100
| 100
| 100
| 100
| 100
| 100
| 100
| 100
|-
! Minimum
| (any)
| (any)
| (any)
| (any)
| (any)
| (any)
| (any)
| (any)
|-
! Maximum
| (any)
| (any)
| (any)
| (any)
| (any)
| (any)
| (any)
| (any)
|-
!colspan="9"| Overrides
|-
! Pulses
| 1.600
| 2.300
| 4.700
| 8.750
| ''TBD''
| ''TBD''
| ''TBD''
| ''TBD''
|-
! Feed Rate %
| 1.000
| 1.000
| 1.000
| 1.000
| ''TBD''
| ''TBD''
| ''TBD''
| ''TBD''
|-
!colspan="9"| Prime
|-
! Steps
| 500
| 700
| 900
| 2000
| ''TBD''
| ''TBD''
| ''TBD''
| ''TBD''
|-
! Rate
| 10,000
| 10,000
| 10,000
| 10,000
| 10,000
| 10,000
| 10,000
| 10,000
|-
! Dwell Time (ms)
| 100
| 100
| 110
| 120
| ''TBD''
| ''TBD''
| ''TBD''
| ''TBD''
|-
! Before Tool Change
| 1
| 1
| 1
| 1
| 1
| 1
| 1
| 1
|-
!colspan="9"| Unprime
|-
! Steps
| 400
| 550
| 750
| 1600
| ''TBD''
| ''TBD''
| ''TBD''
| ''TBD''
|-
! Rate
| 10,000
| 10,000
| 10,000
| 10,000
| 10,000
| 10,000
| 10,000
| 10,000
|-
! Dwell Time (ms)
| 100
| 100
| 100
| 110
| ''TBD''
| ''TBD''
| ''TBD''
| ''TBD''
|-
! After Tool Change
| 1
| 1
| 1
| 1
| 1
| 1
| 1
| 1
|-
!colspan="9"| Offsets
|-
! Clone Head
| Off
| Off
| Off
| Off
| Off
| Off
| Off
| Off
|-
! X
| 0,000
| 0,000
| 0,000
| 0,000
| 0,000
| 0,000
| 0,000
| 0,000
|-
! Y
| 0,000
| 0,000
| 0,000
| 0,000
| 0,000
| 0,000
| 0,000
| 0,000
|-
! Z
| 0,000
| 0,000
| 0,000
| 0,000
| 0,000
| 0,000
| 0,000
| 0,000
|-
!colspan="9"| Head Info
|-
! Model
| (varies)
| (varies)
| (varies)
| (varies)
| (varies)
| (varies)
| (varies)
| (varies)
|-
! RTD Type
| 1 Meg
| 1 Meg
| 1 Meg
| 1 Meg
| 1 Meg
| 1 Meg
| 1 Meg
| 1 Meg
|-
! Motor Current
| High
| High
| High
| High
| High
| High
| High
| High
|-
! Step Mode
| Sixteenth
| Sixteenth
| Sixteenth
| Sixteenth
| Sixteenth
| Sixteenth
| Sixteenth
| Sixteenth
|}

Latest revision as of 12:04, 8 November 2016

Redirect to: