Difference between revisions of "Test"

Latest revision as of 14:04, 26 January 2021

My fantastic infobox
More info

Main Sections
What is GCode?
Understanding the T
Controlling Movement
Controlling Temperature
Controlling Material Flow
Controlling Position and Offsets
Controlling Lasers and UV Pens
Controlling Spindles and Lathes
Reporting and Diagnostics
Controlling Aux Devices
Other Commands

@@ Line 53: / Line 53: @@
 == v3 connectivity, old ==
-=== Version 3.x ===
-If Repetrel doesn't automatically connect to the printer at this time, we may need to manually set the COM port:
-In Repetrel, click the HELP menu and select "List USB devices on this computer":
-[[File:Comlink3_listUSB.png|300px|COM Tab]]
-You should see not only the FT232R USB UART under Devices:
-[[File:Comlink3_DevsUART.png|300px|Devices & Printers]]
-But also, under Unspecified, you should see the STMicroelectronics Virtual COM Port:
-[[File:Comlink3_DevsVCP.png|300px|Devices & Printers]]
-This should have a com port listed at the end of the name, in parentheses. Double-click to open Properties:
-[[File:Comlink3_UART_Props.png|300px|Devices & Printers]]
-Click on the Hardware tab and see if there are any warnings (a hazard icon would be present):
-[[File:Comlink3_UART_Props_HW.png|300px|Devices & Printers]]
-If you have the hazard icon, perform the '''[http://hyrel3d.net/wiki/index.php/Drivers| Installing Drivers]''' tasks again.
-If all looks well, read the port number; this is the port you want to use to connect:
-[[File:Comlink3_UART_Props_HW2.png|300px|Devices & Printers]]
-Select that COM port, ensure the rate is set to 38400, click Apply, then click PING:
-[[File:Comlink3_4.png|300px|Apply and Ping]]
-You should now be connected over the UART protocol:
-[[File:Comlink3_5.png|400px|Apply and Ping]]