Difference between revisions of "30M"

Latest revision as of 14:01, 24 June 2021

The System 30M v2 is our leading enclosed, benchtop model.

Technical Data

Technical specifications and accessory compatibility for printers currently shipping are detailed in the comparison chart on the Printer Overview page.

History

All improvements introduced were implemented to the existing line, obsoleting previous versions (with no price increases):

The System was introduced during our 2012 Kickstarter campaign, and came with a 23" tall enclosure.
The System 30 was an improvement made while fulfilling our Kickstarter obligations, and came with a larger (30" tall) enclosure.
The System 30M was introduced in 2013, and came with a change to all metric fasteners and custom extrusions, and a single (vs double) front door.
The System 30M v2 v2 began shipping in January 2021, equipped with better motors with closed-loop feedback and quieter operation.
As of June 2021, all units are CE marked.

Internals

Here is an explanation of the internal electronics of the 30M; click any images for larger versions:

Tablet Interface Board

Tablet Interface Board (with STM407 Motion Controller) has Internal and External Ports.

The current board, circa 2021.

Spine Board

The Spine Board has Axis Control Internal and External Ports.

The new board, circa 2021.

The original board, most recent revision.

@@ Line 8: / Line 8: @@
 [[File:S30M.jpg|600px]]
+== Technical Data ==
+Technical specifications and accessory compatibility for printers currently shipping are detailed in the comparison chart on the '''[[Printer Overview]]''' page.
 == History ==
-This is our enclosed benchtop model.
+All improvements introduced were implemented to the existing line, obsoleting previous versions (with no price increases):
-* The System was introduced during our KickStarter campaign, and came with a 23" tall enclosure.
+* The System was introduced during our 2012 Kickstarter campaign, and came with a 23" tall enclosure.
-* The System 30 was an improvement made while fulfilling our KickStarter obligations, and came with a larger (30" tall) enclosure.
+* The System 30 was an improvement made while fulfilling our Kickstarter obligations, and came with a larger (30" tall) enclosure.
 * The System 30M was introduced in 2013, and came with a change to all metric fasteners and custom extrusions, and a single (vs double) front door.
-* The System 30M v2 was introduced in 2021, and comes with better motors with closed-loop feedback and quieter operation. CE marked units are available upon request.
+* The System 30M v2 v2 began shipping in January 2021, equipped with better motors with closed-loop feedback and quieter operation.
+* As of June 2021, all units are CE marked.
-== Technical Data ==
+== Internals ==
+Here is an explanation of the internal electronics of the 30M; click any images for larger versions:
+=== Tablet Interface Board ===
+Tablet Interface Board (with STM407 Motion Controller) has Internal and External Ports.
+The current board, circa 2021.
+[[File:30M_ESR_TIB_2021.png|600px]]
+=== Spine Board ===
+The Spine Board has Axis Control Internal and External Ports.
+The new board, circa 2021.
+[[File:Spine_2021.jpg|400px]]
-Technical specifications for printers currently shipping are detailed in the comparison chart on the '''[[Printer Overview]]''' page.
+The original board, most recent revision.
-=== Adjustments ===
-{| border="1" class="wikitable"
+[[File:Spine_orig.jpg|400px]]
-|+ Adjustments
-! Metric
-! Units
-! During Slicing
-! In G-Code Editor
-! GUI During Build
-|-
-! Speed of Travel
-| mm/min || yes || yes || no
-|-
-! Layer Thickness
-| mm || yes || no || no
-|-
-! Flow Rate
-| nL/sec || yes || yes || yes
-|-
-! Extruder Temperature
-| °C || yes || yes || yes
-|-
-! Fan Speed
-| % of max || yes || yes || yes
-|-
-! HotBed
-| °C || yes || yes || yes
-|-
-|}