Difference between revisions of "Videos"

From Hyrel3D
Jump to navigation Jump to search
 
(4 intermediate revisions by the same user not shown)
Line 6: Line 6:
== Table of Videos ==
== Table of Videos ==


Please also see the [[Instructions]] page and the [[Help]] page.
Please also see:
 
* The '''[[Instructions]]''' page  
* The '''[[Help]]''' page
* The '''[[FAQs]]''' page
* The '''[[How_do_I...]]''' page


Remember, you can CTRL+F to search for a keyword on this page! You can also click on a column header to sort by that column.
Remember, you can CTRL+F to search for a keyword on this page! You can also click on a column header to sort by that column.
Note:
The following chart compares and contrasts the various printers:
https://hyrel3d.com/wiki/index.php/Printer_Overview


The following chart compares and contrasts the various heads:
The following chart compares and contrasts the various heads:


http://hyrel3d.net/wiki/index.php/Main_Page#Comparison
https://hyrel3d.com/wiki/index.php/Head_Overview
 
=== Count ===
 
320 videos as of August, 2025.


=== 2025 (2) ===
=== 2025 (12) ===


{| border="1" class="wikitable sortable" style="text-align: center"  
{| border="1" class="wikitable sortable" style="text-align: center"  
Line 22: Line 37:
! Printer Model
! Printer Model
! Head / Activity
! Head / Activity
|-
! [[File:6A1EkbkNbTM.jpg|200px|link=https://youtu.be/6A1EkbkNbTM]]
| Status of MEW, Aug 2025
| MEW
| Update
|-
! [[File:zVBfpaqiBkw.jgp|200px|link=https://youtu.be/zVBfpaqiBkw]]
| Multi-head X/Y Calibration
| Any
| Calibration
|-
! [[File:K0HzW_dj9JE.jpg|200px|link=https://youtu.be/K0HzW_dj9JE]]
| Connecting your PC to a Hyrel Printer
| Any
| Connectivity
|-
! [[File:7bg0TvvytBU.jpg|200px|link=https://youtu.be/7bg0TvvytBU]]
| MEW Voltage Diagnosis
| MEW
| Troubleshooting
|-
! [[File:CFtth_HfvWw.jpg|200px|link=https://youtu.be/cFtth_HfvWw]]
| Loading Extruders
| Any
| Any
|-
! [[File:HJSb2FQ2B4I.jpg|200px|link=https://youtu.be/hJSb2FQ2B4I]]
| 4th and 5th Axis Prints
| H21
| 4th/5th Axis
|-
! [[File:VDT1LxhotzI.jpg|200px|link=https://youtu.be/VDT1LxhotzI]]
| How to print TPU on a Hyrel 3D Printer
| Any
| FH2-260
|-
! [[File:E_5JDr2SDXc.jpg|200px|link=https://youtu.be/e_5JDr2SDXc]]
| How to clone extruders for blended output on Hyrel 3D Printers
| Any
| SDS, SMH, SVMK
|-
! [[File:Ig7vpf8AcsU.jpg|200px|link=https://youtu.be/Ig7vpf8AcsU]]
| How to tram the bed on a Hyrel 3D Standard Resolution Engine (ESR) or System 30M
| ESR, 30M
| Tramming
|-
! [[File:2_2upOA3d4M.jpg|200px|link=https://youtu.be/2_2upOA3d4M]]
| Loading PCL into reservoir of Hyrel 3D extruder
| Any
| KR2/TAM
|-
! [[File:K2zTbT0JNIo.jpg|200px|link=https://youtu.be/K2zTbT0JNIo]]
| Connecting the USB Microscope to a Hyrel Printer
| Any
| Microscope
|-
! [[File:4jPTro1biJA.jpg|200px|link=https://youtu.be/4jPTro1biJA]]
| Removing wires from Hirose PHD Pin Connector
| n/a
| Controllers
|-
! [[File:XuG2sgQ9OwY.jpg|200px|link=https://youtu.be/xuG2sgQ9OwY]]
| Hyrel Melt Electro Writing (MEW) Update
| *Special
| MEW
|-
! [[File:5COcKoEJYUE.jpg|200px|link=https://youtu.be/5COcKoEJYUE]]
| Hyrel: Continuous Carbon Fiber Printing
| H21
| Fibernator
|-
! [[File:9qcKFq57nbg.jpg|200px|link=https://youtu.be/9qcKFq57nbg]]
| GUI-based cloning of extruders for dual extrusion
| All
| All
|-
! [[File:FDJPrb42004 .jpg|200px|link=https://youtu.be/fDJPrb42004]]
| Hyrel Tech Talk: Various Options
| All
| All
|-
! [[File:SSOXCA6oT_I.jpg|200px|link=https://youtu.be/SSOXCA6oT_I]]
| Installing a 4th Axis on a Hyrel EHR
| All
| All
|-
|-
! [[File:BUAhpsAMTOU.jpg|200px|link=https://www.youtube.com/watch?v=bUAhpsAMTOU]]
! [[File:BUAhpsAMTOU.jpg|200px|link=https://www.youtube.com/watch?v=bUAhpsAMTOU]]
| Programming the new FK407 Motion Controllers
| Programming the new FK407 Motion Controllers
| Any, 2024+
| EHR
| All
| 4th Axis
|-
|-
! [[File:PfeLzAajG1M.jpg|200px|link=https://www.youtube.com/watch?v=pfeLzAajG1M]]
! [[File:PfeLzAajG1M.jpg|200px|link=https://www.youtube.com/watch?v=pfeLzAajG1M]]
| Programming the MKS Motor Boards
| Programming the MKS Motor Boards
| Any, 2023+
| Any, 2023+
| All
| Calibration
|}
|}


Latest revision as of 11:50, 3 October 2025

Table of Videos

Please also see:

Remember, you can CTRL+F to search for a keyword on this page! You can also click on a column header to sort by that column.

Note:

The following chart compares and contrasts the various printers:

https://hyrel3d.com/wiki/index.php/Printer_Overview

The following chart compares and contrasts the various heads:

https://hyrel3d.com/wiki/index.php/Head_Overview

Count

320 videos as of August, 2025.

2025 (12)

Table of Video Links, 2024
Video Link Subject Printer Model Head / Activity
6A1EkbkNbTM.jpg Status of MEW, Aug 2025 MEW Update
200px Multi-head X/Y Calibration Any Calibration
K0HzW dj9JE.jpg Connecting your PC to a Hyrel Printer Any Connectivity
7bg0TvvytBU.jpg MEW Voltage Diagnosis MEW Troubleshooting
CFtth HfvWw.jpg Loading Extruders Any Any
HJSb2FQ2B4I.jpg 4th and 5th Axis Prints H21 4th/5th Axis
200px How to print TPU on a Hyrel 3D Printer Any FH2-260
200px How to clone extruders for blended output on Hyrel 3D Printers Any SDS, SMH, SVMK
Ig7vpf8AcsU.jpg How to tram the bed on a Hyrel 3D Standard Resolution Engine (ESR) or System 30M ESR, 30M Tramming
2 2upOA3d4M.jpg Loading PCL into reservoir of Hyrel 3D extruder Any KR2/TAM
K2zTbT0JNIo.jpg Connecting the USB Microscope to a Hyrel Printer Any Microscope
4jPTro1biJA.jpg Removing wires from Hirose PHD Pin Connector n/a Controllers
XuG2sgQ9OwY.jpg Hyrel Melt Electro Writing (MEW) Update *Special MEW
5COcKoEJYUE.jpg Hyrel: Continuous Carbon Fiber Printing H21 Fibernator
9qcKFq57nbg.jpg GUI-based cloning of extruders for dual extrusion All All
FDJPrb42004 .jpg Hyrel Tech Talk: Various Options All All
SSOXCA6oT I.jpg Installing a 4th Axis on a Hyrel EHR All All
BUAhpsAMTOU.jpg Programming the new FK407 Motion Controllers EHR 4th Axis
PfeLzAajG1M.jpg Programming the MKS Motor Boards Any, 2023+ Calibration

2024 (10)

Table of Video Links, 2024
Video Link Subject Printer Model Head / Activity
1vCTKK65RPQ.jpg Setting up the Hyrel 3D H21 to print PEI (Ultem) in the Heated Chamber (up to 150C) H21 FH2-450
UI7UeOIduAE.jpg Hyrel 3D H21 Heated Chamber (up to 150C) Instructions H21 FH2-450
QMgwc6jINxY.jpg Printing with 4th Axis (lathe-style) movement H21 Any
LiTH9QKAd-E.jpg DXF to Gcode for Hyrel 3D Inkjet Head Any Inkjet
ArhUc5yKYNc.jpg Tuskegee Hydra 21 Setup H21 FH2-260
WH6H3DnNjJk.jpg Tuskegee University prints on Hydra 21 H21 FH2-260
AHROiw0INxo.jpg Surface Mapping Configuration on Hyrel 3D Software H21 Probe
1gtfdQCLGacQ.jpg Slicing a DXF to etch with a Hyrel 3D Diode Laser Any Lasers
1y5nrlOKWK6M.jpg Hyrel3D: HEATED Small Volume Mixing Kit (SVMK) setup Any Reservoir
PsaduGKoLJw.jpg Hyrel 3D: Dual RSD instructions Any Reservoir

2023 (11)

Table of Video Links, 2023
Video Link Subject Printer Model Head / Activity
200px 75mm tall PPSU part printed on Hydra 21 H21 Filament
6g4C8rsn3Ks.jpg Configuring the Hyrel 3D RSD-30 head (heating and cooling) Any RSD-30
TJR xZNTRHM.jpg Hyrel 3D use at Universidad Autónoma de Occidente, Columbia 30M Various
W33CN9IGQiY.jpg Drying and Preheating filament with an air fryer Any Filaments
H PQNuxNNJ8.jpg Closed-loop Bio Dispensing on a Scale with 1.5% accuracy Any head_activity
6g4C8rsn3Ks.jpg RSD-30 Configuration Any SDS
ETKVKX4PIBA.jpg New Chuwi Tablet Installation 30M Tablet
1foqRMFgVjM8.jpg Slicing and printing TPU on a Hyrel 3D printer All FH2
1pF2 ZCXF 7w.jpg Hyrel 3D's new 300cc bulk feeder heads for liquids, gels, pastes. All EMO-300XT
1mDlVP7HDVLw.jpg Hyrel 3D: Heated Pneumatic Syringe Head Intro All 2HN-PNU*
6inSx0kMIEk.jpg New-style Pick-and-Place Head Introduction H21 PNP

2022 (23)

Table of Video Links, 2022
Video Link Subject Printer Model Head / Activity
200px Hyrel3D Bioprinting at the Food and Bioengineering Lab of TalTech, Estonia EHR Printing
T2R3cuBm0S8.jpg Additional Setup for new printers All n/a
SaCESWMzTzU.jpg Technical University of Denmark printing on a Hyrel 3D Printer ESR Printing
Mprt AHMJrQ.jpg Creating Text Objects with Repetrel All n/a
T0Sjq4gWLs0.jpg New Small Volume Mixing Kit Any SVMK, Microfluidics
FvAWmbVkBxE.jpg Integrating MATLAB with Repetrel Any Any
6PqZkRNnbuI.jpg Adjusting to avoid Elephant Foot with PCL and similar materials Any KR2, TAM
8oTzRYFHFy0.jpg Hyrel head lowering attachment Any Any
RMVCPDqZamI.jpg Cleaning residue from the HIgh Torque KR2 cartridge Any HTK
ZcLTrAIVWh8.jpg Scaling your print with the Hyrel Microscope Any Microscope
200px Cleaning PCL, PLA, or PDO residue the Hyrel HTK cartridge of the KR2 head. Any Cleanup
M9WznRpnLY8.jpg Using head offsets to change tool positions while leaving the output in the same location Any Calibration
CM9AwdiZQ2M.jpg Demo setup and test: Pick-and-Place H21 Configuration
N1HVzUgp5hU.jpg EHR Position Adjustment EHR Calibration
PRvXvj02wdU.jpg Analyzing and calculating the porosity of scaffolds - Hyrel 3D Any Scaffolds
CoPUoa5knws.jpg Replacing big tree board on Z motor on Hydra 21. H21 Maintenance
ZcsDLxkzio8.jpg How to prepare powdered material for use in Hyrel 3D's heated syringe heads. All Bio
NQn0MgFGswE.jpg How to level the build platform on the new Hyrel 3D Hydra 21 printer. H21 Maintenance
R5NerkHj1aY.jpg How to measure the scale of biological scaffold prints. All Bio
KPSnNNQ3Mao.jpg How to melt and print with PCL pellets with the Hyrel KR2 head. All Bio
0uU5M8bwkDU.jpg How to remove PCL scaffolds from PVC build surface. All Bio
FTPT0TiFSJw.jpg Hydra 21 Unboxing Instructions H21 All
FB4Sy0HFy8.jpg Cirles, Arcs, Spirals, and Helixes: Hyrel's G2 and G3 gcode generation tool All All

2021 (44)

Table of Video Links, 2021
Video Link Subject Printer Model Head / Activity
Ah UguF8cNg.jpg Scaffolds: Adjusting the flow value (P/uL) All All
CT-4Sk2DBMw.jpg Scaffolds: Adjusting the final retract (unprime) All All
MbLeyEoBXek.jpg Scaffold Gradient: Speed and Z position Instructions All All
AcVa5mrdjFQ.jpg Scaffold Gradient: Speed Instructions All All
VBAFH6J5-to.jpg Scaffold Perimeters Tool All All
HT0i3EP4HBM.jpg Customizing Visualization in Repetrel All All
200px Biogel Scaffold Speed Test All All
CEW RQqCDPM.jpg Programming BigTree Drivers for Hyrel Printers All Flashing
P0G0uKOokJ8.jpg Using a USB Camera with Repetrel All Camera
GjIXmTDOg5E.jpg Heated Nozzle Accessory All Reservoirs
Onnl10Ea1tQ.jpg Scaffold Options in Repetrel All All
QnvzDbYEFfA.jpg Cleaning the Hyrel 3D DMH-2 Dynamic Mixing Head All Reservoir
3KLIdStlvwU.jpg Calibrating Head Offsets for Hyrel 3D All All
200px Hyrel 3D "Return Trip" Option for Scaffolds All Zebra Prints
200px Hyrel 3D Viscosity Test Clean Up All Reservoir
200px Hyrel 3D's Coaxial Extrusion Head with Nozzle Heater All Reservoir
P28Y7NNT3DQ.png Configuring "Zebra" prints in Repetrel on Hyrel 3D Printers All Zebra Prints
DX1fBX51XNI.png Designing Scaffolds in Repetrel All Scaffolds
St6nehNLTdc.png Resolving a stuck plunger in a Hyrel 3D reservoir head All Reservoir
AtQuLaYVGzA.png Hyrel 3D Announces Polar Printing for Extreme Environments! Polar All
ADqB1DjM9Ug.png Eliminating air bubbles in a Hydrogel All Reservoir
MbyRncFmpyg.png Cleaning Hyrel 3D's DMH-2 Dynamic Mixing Head All DMH-2
JvenAK33OmI.png How to echo gcode commands to the display All Usage
Hd4iq3HR9c8.png Removing PCL Prints Faster and Easier All PCL
Hcxd5uonkxE.png Overview of the Hyrel 3D "Quiet Storm" Additional Cooling Fan All Quiet Storm
V5cKuYY1PAw.png Preparation and Setup for Printing PCL (polycaprolactone) All PCL
7ozTI eiFqk.png Choosing and Specifying Parameters for Rectangular Infill Scaffolds All Scaffolds
Dfm8RYyzmas.png Choosing and Specifying Parameters for Gyroid Infill PCL Scaffolds All Scaffolds
ASy9HIwz04Q.png Showing the Effects of Cooling while Printing All Cooling
A4bXqRb5-q8.png How to manage Accessory Manuals in Repetrel All Usage
EXMxgF-Yf1o.png Saving, Naming and Reusing Scaffolds All Scaffolds
3H-gJNUDncA.png How to work with our Heated Nozzle Accessory All Heated Nozzles
DXjh36CcRAw.png Using Filters to refine SurferBuddy search results All SurferBuddy
JQCcelqLoQE.png How to Export SurferBuddy Files to External Drive 1 All SurferBuddy
EqoyARWTTLo.png Using Parameter Profiles in Repetrel All Parameter Profiles
NbfntNBKSIg.png How to Export GCODE from Repetrel All Usage
5lYDLhbnQxE.png Using offsets to repeat a job in different locations All Offsets
3tRDj7y54SU.png Custom screeding attachment for the Hyrel Hydra 16A EHR Calibration
JljdH1V4ips.png Hyrel Nozzle Heater for Reservoir Heads All Reservoir
Qqh2Y0Wg9HA.png Unboxing the Hyrel EHR for electro-spinning or melt-electro-writing (MEW) EHR Setup
Calibrate.png Calibrating Travel on the EHR EHR Calibration
Unpack.png Unpacking and Setting Up the EHR EHR Setup
VjZlZkBt130.png How to check if your CO2 Laser is working Hydra Lasers
SDqVHXZxrBI.png Etching Aluminum with 450 nm Diode Laser any Lasers
9BKE469eL0M.png Heated and Chilled Vacuum Bed (HCVB) EHR, 16A Reservoir

2020 (30)

Table of Video Links, 2020
Video Link Subject Printer Model Head / Activity
NW-O76oAlu4.png The Hyrel Hydra Electrical Panel, Explained 16A Overview
SF7UoogD-mg.png Making DXFs from Camera Images All Lasers
https://www.youtube.com/watch?v=_Mr7qEBgu8M Viscotec Vipro HEAD-3 on Hyrel All Viscotec
LajxuYqTw6o.png Explaining the NEW RSD-30 All Reservoirs
IbdUwZyZm3I.png Making DXFs from CAD Models All Lasers
1Rtktf-HeTU.png 4th/5th Axis Installation and Setup 16A All
H8XnGKBEJCc.png 3-Phase Spindle Tool Installation and Setup 16A Spindles
JW1-uhvZ5wM.png Clench/Pinch Valve Installation and Setup All Reservoirs
X7J4pTeSq8A.png Dynamic Mixing Head (DMH) Installation and Setup All Reservoirs
Dlta7KSt3bE.png EHR Electronics Access EHR Overview
H0pAYAraO0Q.png ESR Unboxing and Setup ESR Setup
DgfeoLZNW6c.png RSD-30 Refrigerated Syringe Dispenser All Reservoirs
ILEvP8p JGo.png Printing on PEI All Filaments
7lwJvyBso1k.png Printing Cememtitious Materials at TN Tech All Reservoirs
PX9KFUrSPVk.png Tightening set screws for Hydra X-axis 16A Maintenance
MOexKcvpcEY.png Interview on GA Mfg News All All
R7UimNDjNiY.png Hyrel V4 Install No. 9: Licensing All All
0CMH61RtSjk.png Hyrel V4 Install No. 8: Recipes All All
N1HZOvWKqs8.png Hyrel V4 Install No. 7: Settings All All
9qbUzZM3vtg.png Hyrel V4 Install No. 6`: Firmware All All
-JN 0iLTOk4.png Hyrel V4 Install No. 5: Drivers All All
2BVzTR7ij5Y.png Hyrel V4 Install No. 4: Repetrel All All
-Dp-4 NdYm8.png Hyrel V4 Install No. 3: Adobe Reader All All
VH3Fv6jkA54.png Hyrel V4 Install No. 2: Ecosystem Apps All All
OpM-RcDuM5c.png Hyrel V4 Install No. 1: Winrar All All
MdNsQnHy4dQ.png Hydra 16AT - Tall 16A All
Zh-x9ugJ5nE.png Hyrel Bulk Feeder for Cementitious Materials 16A Reservoirs
RW7h9z5DW5A.png Using the new Precision Tool Setter on a Hyrel 3D Printer 16A All
E7tQN 63hcc.png How to Dial In the Prime and Unprime Settings All All
TlnVUBryBg0.png Installing a Second Yoke on a Hyrel Hydra 16A All

2019 (21)

Table of Video Links, 2019
Video Link Subject Printer Model Head / Activity
S3qw8dAWeNo.png RSD-30 - Refrigerated Syringe Dispenser All Reservoirs
RAkjF9nLy4M.png Heated & Chilled Vacuum Bed 16A, EHR Reservoirs
Gl3mbw88fmo.png 4th Axis Fun - Linear and Rotary Printing 16A All
VVhH8hc3olc.png CO2 Laser - Installation Instructions 16A Lasers
SVC5W DdQ9E.png Dynamic Mixing Head DMH All Reservoirs
4oqPbfdD8O0.png Configuring Prusa Slicer for Multi-Material Support All Filaments
DDwGcDgOOQs.png Configuring the Prusa Slicer for Breakaway Support Material All Filaments
CW77WBv3x0Q.png How to Load Filament into a Hyrel 3D Print Head All Filaments
EMfkmXFuPd0.png Loading Print Heads into your Hyrel 3D Printer All All
XC1zLqYkKsc.png How to Calibrate the Z-Zero Position 16A, 30M, ESR All
0Apq3tlila8.png Revised 2019: Hyrel 30M Initial Setup 30M All
0MFtqhM6ZKM.png How to select a Build Surface All Filaments
-4LuhNfbMAo.png How to Tram (level) the Hydra Bed 16A All
C5-NYk06NVc.png Laser Marking on a Cylinder All Lasers
PjqDXXPjI4w.png Five Axis Machining in Brass on a Hyrel Hydra 16A Spindle
KmkGR7u5D58.png Configuring your Hydra for a 3-phase Spindle Tool 16A Spindle
B0lvN-aPYHI.png Five Axis Machining on a Hyrel Hydra
(this gcode was used) 		16A Spindle
CmBaHHAfbEo.png Dispensing RTV Silicone on a Hyrel Hydra All Reservoirs
G526vFi8yWI.png Machining PTFE (Teflon) on a Hyrel Hydra 16A Spindle
LfmssRdZwuE.jpg Rotating Head Prototype 16A Filaments
YhoMTLGVAbc.png Re-aligning the Gantry on the Hyrel Hydra 16A 16A All

2018 (12)

Table of Video Links, 2018
Video Link Subject Printer Model Head / Activity
CbxB96oZFGE.jpg Installing the new laser Power Supply in a Hyrel Hydra 16A All
KrwOviaCZuw.jpg Hyrel Tapping Enabled 16A Spindle
QuIM9XSYMxE.jpg Light Duty Milling with 3-Phase Spindle on a Hyrel Hydra 16A Spindle
Ni56OFo1VvM.jpg Improved UV Light Source for more Powerful Crosslinking All Reservoirs
68oktmbp8r0.png How to install 4th and 5th Axes on a Hyrel Hydra 16A All
7DcqbBzs-ZQ.png How to use an additional Yoke on a Hyrel Hydra 16A All
VerQRjS3iWE.png How to install an additional Yoke on a Hyrel Hydra 16A All
JSTmzuuMYvc.png The Filament Dryer All Filaments
LNURH2fRbY0.jpg Fourth and Fifth Axes Demo on a Hyrel Hydra 16A All
9R6OUMvb.jpg Installing a fourth axis on a Hyrel Hydra 16A All
2QqwfsKgzuQ.jpg Machining hotbeds to under 0.001" 16A All
O1xmXCdj1xE.png Setting the Z-Offset on the EHR EHR All

2017 (45)

Table of Video Links, 2017
Video Link Subject Printer Model Head / Activity
KqnjlTSg-20.jpg CO2 Laser Marking with the Hydra 16A Lasers
FnYDoNkgOrI.jpg Converting a Hydra from Printer to Laser 16A Lasers
FHqTlcdISIg.jpg Cutting Nylon Mesh with CO2 Laser on a Hydra 16A Lasers
NTejDT1B6uQ.jpg Chamber Temperature in a Cold Room 16A Filaments
4Y9V6RWhKj4.jpg Cutting acrylic with the CO2 Laser 16A Lasers
DkMtzPDtIQY.jpg Tiny Heated Chilled Bed Preview EHR Reservoirs
GdvyT8HoaOw.jpg Fourth Axis Rotary Print 16A Filaments
3nKqwcXcEgY.png Additive Manufacturing of Toroid Inductor for Electronics Applications 30M, ESR Reservoirs
Az7V1FSRJfs.jpg Hyrel Hydra X and Y Belt Tension Adjustments 16A Maintenance
SyMB5063J5E.jpg Hyrel Hydra Linear Bearing Adjustments 16A Maintenance
ZEsnegXhpLw.jpg Hyrel Hydra Z Belt Tension Adjustments 16A Maintenance
WNr59eCGuK4.png Changing the Address Resistor on the CO2 Laser 16A Maintenance
QBBxkx40H8s.png CO2 Laser Alignment 16A Calibration
YiizFlScq9Q.png Hydra Yoke Adjustment 16A Maintenance
CbiCnP YEbA.png Hydra Yoke Angle Adjustment 16A Maintenance
XMsXzGPHjng.png Engnie, High Resolution (EHR) Setup, Part 2 EHR Setup
NbWgw9KY6Ic.png Engnie, High Resolution (EHR) Setup, Part 1 EHR Setup
UC7acwIkKmQ.png EHR Scaffold Instructions EHR Setup
B1x2dvdYkTE.png EHR Scaffold Intro EHR Setup
OisWKujfXAI.png Unclogging a rare clogged MK1-250 All Filaments
6FQJuhd2Lxo.png Unclogging a rare clogged MK1-450 All Filaments
WrImt7 Pnxo.png Flashing Firmware on the Modified CO2 Laser Controller 16A Maintenance
1J5bqvcV3Rs.png The Hyrel Hydra Family 16A All
CF7eRdFuZYQ.png High Resolution Engine Vacuum Bed EHR Reservoirs
EltjeQ6KerM.png High Resolution Engine Setup EHR Setup
SvX4gKqAQDI.png SDS Clench Valve Assembly Instructions All Reservoirs
Mz5J8jsb6D4.png How to Load the SDS Clench Valve All Reservoirs
JwKq8 tahYA.png EHR Accuracy Test EHR Calibration
Udbu Zuh8k0.png Hydra 16A Controls Overview 16A All
CClPqIJwhLs.png Using Low Temperature Solder Paste to connect a Flat Flex Cable 30M, ESR Assembly
GCzPw4FOG8c.png Draining Laser Coolant on the Hyrel Hydra 16A Lasers
PPtGSwyS140.png Hydra Home Calibration Details 16A Calibration
LLIWqTRBhTo.png Replacing the top component on an SDS Head Assembly 16A Setup
QxbtI034omk.png HYDRA Hot Bed Installation 16A Setup
FuLCsqfAX3E.png Hydra Model Startup All Reservoirs
LhnV9H7LV9g.png Unboxing the Hydra Floor Model Units 16A Setup
ULpn18OqD-U.png Hydra Overview by CTO Karl Gifford 16A All
QEfskyU7LJ4.png How to Manage the Pick-and-Place with Repetrel Software 16A Pick-and-Place
Jz3onGdmW1c.png Hyrel Hydra Versitility 16A All
PKkrd4R 54Y.png Hydra Vinyl Cutter Overview 16A Cutting
HaKWeCbXkMI.png Hyrel 3D Hydra Pick-and-Place Introduction 16A Pick-and-Place
UACoqtNbXE0.png The Hyrel3D Hydra Line 16A All
KAoSS-Z-aeY.png Tramming the bed on the 16A 16A Maintenance
TibkVZB n9c.png The Benefits of Microscope Inspection During Printing All Microscopes
AR4d-2BZj Y.png Printing PLGA for internal Biological Applications All Reservoirs

2016 (60)

Table of Video Links, 2016
Video Link Subject Printer Model Head / Activity
Z4IGQ5JMP6g.png Varialble Width Conductive Paste Extrusion Any Reservoirs
2f5FEhVsqy8.png Microscope Print View Setup Any Microscope
D2sWEYRVAII.png Replacing the LED Strip 30M Maintenance
14ynZ3DHzVg.png Replacing the Front Switch Panel 30M Maintenance
DQj6oLfrbLo.png Static Mixing Head (SMH) Explained - v2 Including SDS Heads Any Reservoirs
VJXnB-8JII.png Hot Bed Manufacturing Hydra Manufacturing
3azICOBuHdk.png Static Mixing Head (SMH) Explained Any Reservoirs
6qJ-2uFt- Y.png Timelapse Recording Any Recording
ROpcvqS r8s.png HotHead LEDs Explained Any Any
Tz6mRSkOaSk.png LA6-450 and LA5-808 Laser Overview Any Lasers
H95IurET7UM.png SDS and CSD Overview Any Reservoirs
4B9hoMLNOuQ.png Quiet Storm Cooling Fan Overview Any Filaments
9 onCKhT dg.png VOL-25 and VCD-25 Overview Any Reservoirs
QD2FrZ4kg1g.png KRA-15 and KCD-15 Overview Any Reservoirs
Rc2UFwjUtc4.png Hydra 640 (16A) Two Part Test Print Hydra Filaments
Ql1NZLWVJQM.png Extrusion Prototype Print Any Filaments
KtK256u0sN8.png EMO-25 and COD-25 Overview Any Reservoirs
Vn8jnvwh5to.png Session 3C Slicing for Multiple Head Support Any Slicing
P1Ihd4ETxhg.png Session 3A - Setting Two Heads to Z-Zero Any Setup
FCuSvQm6ej4.png Session 3B - Calibrating the Offset Between Two Heads Any Setup
DkQpsJWRI4Y.png Session 2D - Editing Slic3r Recipes Any Slicing
KJc9sNlV0fA.png Session 2E - Slicing your STL and Viewing your GCODE Any Slicing
IQbgGwiGVZA.png Session 2C - Positioning, Scaling, and Rotating your STL Any Slicing
MVyCq7CPGLg.png Session 1A - Hardware and Software Overview Any Overview
2tIHw JIQAI.png Session 1B - Communications and Bed Leveling 30M, ESR Setup
LFATCfKJf4I.png Session 1C - Printing with Plasticine Any Reservoirs
2yHRuef29L4.png Session 2A: Simple CAD Modeling in FreeCAD Any Software
RlJqdhtpB6Q.png PC to Printer Connectivity Any Setup
C88ni0huwhw.png Using the Spindle Tool to rework Circuit Boards Any Spindle
KIGeQmXNbNE.png Running a FADAL CNC on Hyrel3D Circuitry, Firmware and Software n/a Manufacturing
ImMo3V1D70w.png Table Arm (X-Arm) Block Adjustment 30M, ESR Maintenance
YaCYFmoIESk.png MK1-250 Overview Any Filaments
UvZMecXsHEM.png MK1-450 Overview Any Filaments
SOGKeU3vLbs.png MK2-250 Overview Any Filaments
FkJT3ILlAHw.png Replacing the 30M/ESR Heated Build Platform 30M, ESR Maintenance
3KwJ6OgOx14.png Multi Head Printing - Nested STLs Any Software
4GYWfMrs0F8.png X-Axis Belt Tightening 30M, ESR Maintenance
IkgviAGep-c.png Y-Axis Belt Tightening 30M, ESR Maintenance
LQy25Nlj3 Q.png Plasma Magnetic Vortex Deposition (ElectroSpinning) EHR Electro (Melt) Spinning
LQb5vS97jFo.png 3D Milling on the Hydra Series Hydra Spindle
81sVBZOOcbw.png Introducing the Hydra 640 (formerly Model 16A) Hydra Overview
UPqr4S0WC3Q.png USBB Jumper Instructions Any Setup
Rw2E d-q9bQ.png Size Does Matter Hydra Overview
XGriCCrfkuw.png Print Heads Overview Any All
QMyuKdgiWI4.png Session 2F - Loading and Printing with Filaments, MK-Series Heads Any Filaments
YsO8oAzFwC4.png MK1-250 PEEK Nozzle Assembly Any Filaments
BoHRC9m5nlQ.png New Hydra Printer Line Intro Hydra Overview
XREWb Md5o0.png Bioplotting for under $10K EHR Introduction
9zxxBYbdlOE.png Programming Head Offsets Any Setup
NfIvS50zLyc.png Slicing for a Two-Material Print Any Slicing
0dS3bC0BnRQ.png Loading Filament and Printing with the Hyrel3D MK2-250 Any Filaments
V2ifSlZ0qEw.png Loading Filament and Printing with the Hyrel3D MK1-250 Any Filaments
Q-DbAbNMW48.png Loading and Printing with the EMO-25 Print Head Any Reservoirs
Ej55bZXrltA.png SDS RTV Instructions, v2 Any Reservoirs
MwrhV74NjCQ.png Intro to Hyrel Possibilities - Jan 2016 All Overview
V zCytnGvvo.png MK2-250 Dual Drive for Flexible Filaments Any Filaments
O1IGa-8y9yQ.png 6w, 450nm Laser Test Any Lasers
0JJp7HeK35M.png SDS RTV Instructions, v1 Any Reservoirs
XKHa1CXnSdI.png Introducing the SDS Print Heads Any SDS
BlSGlOpyipI.png Sneak Peek: Pick and Place Prototype Hydra Pick-and-Place

2012-2015 (42)

Table of Video Links, 2012-2015
Video Link Subject Printer Model Head / Activity
OceUiuTixPA.png LA6-450: 6w, 450nm Diode Laser Head Any Lasers
Vmw0LS f9V0E.png 3D Printing RTV Silicone Any Reservoirs
YWe3TQGgNW0.png Loading the VCD-25 Any Reservoirs
HuJuexTLbYA.png Short Porcelain Print Demo Any Reservoirs
B583I7AlGJI.png Replacing the Tablet Interface Board 30M Maintenance
ZKAzXoJ0q8Y.png 2016 Design Contest Video N/A Contest
YRsyEGHyt3k.png DXF to Laser Gcode Generation Any Setup
Om9cjxMXuxY.png Printing PEEK (PolyEther Ether Ketone) and PC (PolyCarbonate) Any Filaments
IreaoCfQ8mE.png Healing with MeshLab Any Setup
0Aj9WCabPgw.png Postprocessing with a Heat Gun Any Postprocessing
4oxCqR DVNQ.png Introduction to Hyrel 3D Possibilities, 2015 All All
N4QwiuQtjO0.png Updating to Repetrel 2 4xx Any Software
CFAFRkpLmww.png Updating your 407 Motion Controller All Software
XKCEkKSolZc.png Replacing the HOTHEAD controller Any Any
YM8QMZBTb4o.png Programming the HOTBED controller on the System 30M and ESR 30M, ESR Software
CuRcIE-Jbyc.jpg Printing with Cloning - three heads in Parallel Any Any
VMyS3h4qiSA.jpg Older Instructions, Slicing for Multiple Head Support printer head
0gFX6Mh-ths.png Leveling the X-Arm on System 30M, Engine SR 30M, ESR Maintenance
LZd0ecogGlQ.png Correcting Y-Arm Flexation Fix on the System 30M, Engine SR 30M, ESR Maintenance
ArDX4UpflmE.png Manually Setting the Z-Zero Position Any Setup
Vc9gBZtUL7c.png Picking Right 3D Printer For You All All
66S9XJ-KeU8.png Changing the Main I/O Board, System 30M, ESR 30M, ESR Maintenance
YEePz8 0ttc.png Laser Test Print Any Lasers
TLHpaePTP-k.png EMO Series Printing Tips Any Reservoirs
Zl1sqy6PWx8.jpg Changing Power Supplies in the 30M and ESR 30M, ESR Maintenance
IQscrgv6uaQ.png Multi-Head Calibration Guide Any Setup
0lpa4nENtyQ.png LA5-808 "Shark V" Diode Laser Any Lasers
MPYPWjnDGho.png Luer Tip Kit for EMO and SDS Series Print Heads Any Reservoirs
-VHxf182fIs.png Print Head SDK Any New!
Fg9omXlYR-Q.png MK Series Printing Tips Any Filaments
EosKDe-SyUI.png Replacing fuses (old) on the Yoke Any Maintenance
4yuzpUqeE-Y.png Loading the EMO-type Reservoirs Any Reservoirs
XQFacnpzmv0.png Changing the Economics of 3D Printing Any Any
C9HvQ3SepoM.png System 30M Product Release 30M Introduction
P6aMBQSZPgg.png Simultaneous 3D Printing of Multiple Parts Any Any
Nuii5rP53Js.png 3D Printing with Sugru The Amazing Self-Setting Rubber Any Reservoirs
DihvAQR7LQg.png 3D Printing with Play-Doh Any Reservoirs
Cw8XiW46G0k.png 3D Printing with Plasticine Any Reservoirs
Trdz4YDbdsw.png 3D Printing with Air-Dry Modeling Clay Any Reservoirs
XNwv7Dw Zwg.png Interchangeable Hot-Swappable Heads Any Any
Mu9xMmkZFns.png Thank you, Kickstarters! Any Any
Z9rgkw5r4l4.png Quick Tour of our Main Shop! Any Any
Retrieved from "https://hyrel3d.in/wiki/index.php?title=Videos&oldid=6660"