Difference between revisions of "Videos"

From Hyrel3D
Jump to navigation Jump to search
Line 50: Line 50:


Here are some basic instructions; a more structured presentation can be seen at the [[Instructions]] page.
Here are some basic instructions; a more structured presentation can be seen at the [[Instructions]] page.
=== Training Lessons ===
==== Session One: Overview, Tramming, Printing with an Emulsifiable ====
# [https://www.youtube.com/watch?v=mVyCq7CPGLg Session 1A: Hardware and Software Overview]
# [https://www.youtube.com/watch?v=2tIHw_JIQAI Session 1B: Communications and Tramming]
# [https://www.youtube.com/watch?v=lFATCfKJf4I Session 1C: Setting Z-Zero and Emulsifiable Print]
==== Session Two: CAD Modeling, Positioning, and Printing with Filament ====
# [https://www.youtube.com/watch?v=2yHRuef29L4 Session 2A: Simple CAD Modeling in FreeCAD]
# [https://www.youtube.com/watch?v=eLGIRAgLz4w Session 2B: Healing an STL in MeshLab]
# [https://www.youtube.com/watch?v=IQbgGwiGVZA Session 2C: Positioning, Scaling, and Rotating your STL]
# [https://www.youtube.com/watch?v=dkQpsJWRI4Y Session 2D: Editing Slic3r Recipes]
# [https://www.youtube.com/watch?v=kJc9sNlV0fA Session 2E: Slicing your STL and Viewing your GCODE]
# [https://www.youtube.com/watch?v=v2ifSlZ0qEw Session 2F: Loading and Printing with Filaments]
==== Session Three: Slicing and Printing One STL with Multiple Heads ====
# [https://www.youtube.com/watch?v=p1Ihd4ETxhg Session 3A - Setting Two Heads to Z-Zero]
## [https://www.youtube.com/watch?v=IQscrgv6uaQ Session 3A - Alternate Version]
# [[[https://www.youtube.com/watch?v=FCuSvQm6ej4 Session 3B - Calibrating the Offset Between Two Heads]
## '''GCODE:''' [http://hyrel3d.net/downloads/gcode/PLUS.GCODE Calibration Target]
# [https://www.youtube.com/watch?v=Vn8jnvwh5to Session 3C - Slicing and Printing with Second Head Support]
# Session 3D - [https://www.youtube.com/watch?v=cuRcIE-Jbyc Clone or Parallel Printing]
==== Session Four: Slicing and Printing Multiple STLs with Multiple Heads ====
# [https://www.youtube.com/watch?v=3KwJ6OgOx14 Session 4 - Advanced Slicing and Printing: Multiple STLs with Multiple Heads]


=== General Information ===
=== General Information ===

Revision as of 13:30, 28 November 2016

Please also see the Instructions page and the Getting Started page.

Our YouTube Page.

Product Features

Print Material

Instructions

Here are some basic instructions; a more structured presentation can be seen at the Instructions page.

Training Lessons

Session One: Overview, Tramming, Printing with an Emulsifiable

  1. Session 1A: Hardware and Software Overview
  2. Session 1B: Communications and Tramming
  3. Session 1C: Setting Z-Zero and Emulsifiable Print

Session Two: CAD Modeling, Positioning, and Printing with Filament

  1. Session 2A: Simple CAD Modeling in FreeCAD
  2. Session 2B: Healing an STL in MeshLab
  3. Session 2C: Positioning, Scaling, and Rotating your STL
  4. Session 2D: Editing Slic3r Recipes
  5. Session 2E: Slicing your STL and Viewing your GCODE
  6. Session 2F: Loading and Printing with Filaments

Session Three: Slicing and Printing One STL with Multiple Heads

  1. Session 3A - Setting Two Heads to Z-Zero
    1. Session 3A - Alternate Version
  2. [[Session 3B - Calibrating the Offset Between Two Heads
    1. GCODE: Calibration Target
  3. Session 3C - Slicing and Printing with Second Head Support
  4. Session 3D - Clone or Parallel Printing

Session Four: Slicing and Printing Multiple STLs with Multiple Heads

  1. Session 4 - Advanced Slicing and Printing: Multiple STLs with Multiple Heads

General Information

Filament Specific

Emulsifiable Specific

GCode, Modeling and Slicing

Troubleshooting, Maintenance and Tuning

Archives

Retrieved from "https://hyrel3d.in/wiki/index.php?title=Videos&oldid=1228"