Difference between revisions of "Videos"

From Hyrel3D
Jump to navigation Jump to search
Line 108: Line 108:
=== Emulsifiable Specific ===
=== Emulsifiable Specific ===


* Overview of the EMO-25 and COD-25 Heads: https://www.youtube.com/watch?v=ktK256u0sN8
* Overview of the EMO-25 and COD-25 Extruders: https://www.youtube.com/watch?v=ktK256u0sN8
* Loading the EMO-25: https://www.youtube.com/watch?v=4yuzpUqeE-Y
* Loading the EMO-25: https://www.youtube.com/watch?v=4yuzpUqeE-Y
* More Loading the EMO-25: https://www.youtube.com/watch?v=IEmQJxlPnuY
* More Loading the EMO-25: https://www.youtube.com/watch?v=IEmQJxlPnuY

Revision as of 13:33, 28 November 2016

Please also see the Instructions page and the Getting Started page.

Our YouTube Page.

Product Features

Print Material

Instructions

Here are some basic instructions; a more structured presentation can be seen at the Instructions page.

Training Lessons

Session One: Overview, Tramming, Printing with an Emulsifiable

  1. Session 1A: Hardware and Software Overview
  2. Session 1B: Communications and Tramming
  3. Session 1C: Setting Z-Zero and Emulsifiable Print

Session Two: CAD Modeling, Positioning, and Printing with Filament

  1. Session 2A: Simple CAD Modeling in FreeCAD
  2. Session 2B: Healing an STL in MeshLab
  3. Session 2C: Positioning, Scaling, and Rotating your STL
  4. Session 2D: Editing Slic3r Recipes
  5. Session 2E: Slicing your STL and Viewing your GCODE
  6. Session 2F: Loading and Printing with Filaments

Session Three: Slicing and Printing One STL with Multiple Heads

  1. Session 3A - Setting Two Heads to Z-Zero
    1. Session 3A - Alternate Version
  2. [[Session 3B - Calibrating the Offset Between Two Heads
    1. GCODE: Calibration Target
  3. Session 3C - Slicing and Printing with Second Head Support
  4. Session 3D - Clone or Parallel Printing

Session Four: Slicing and Printing Multiple STLs with Multiple Heads

  1. Session 4 - Advanced Slicing and Printing: Multiple STLs with Multiple Heads

General Information

Filament Specific

Emulsifiable Specific

GCode, Modeling and Slicing

Troubleshooting, Maintenance and Tuning

Archives