Difference between revisions of "Videos"

From Hyrel3D
Jump to navigation Jump to search
Line 85: Line 85:
=== General Information ===
=== General Information ===


* HotHead/HotBed 103 Controller Board LEDs Explained https://www.youtube.com/watch?v=q90Bj07MiqI
* Quick Start Video: https://www.youtube.com/watch?v=vtfIq4RQ6_w
* Quick Start Video: https://www.youtube.com/watch?v=vtfIq4RQ6_w
* Upgrading to Repetrel 2.4xx: https://www.youtube.com/watch?v=YyXFKYpzs30
* Upgrading to Repetrel 2.4xx: https://www.youtube.com/watch?v=YyXFKYpzs30

Revision as of 19:32, 5 December 2016

Please also see the Instructions page and the Getting Started page.

Our YouTube Page.

Product Features

Print Material

Instructions

Here are some basic instructions; a more structured presentation can be seen at the Instructions page.

Training Lessons

1: Basics and Emulsifiables

  1. Session 1A: Hardware and Software Overview
  2. Session 1B: Communications and Tramming
  3. Session 1C: Setting Z-Zero and Emulsifiable Print

2: Modeling and Filaments

  1. Session 2A: Simple CAD Modeling in FreeCAD
  2. Session 2B: Healing an STL in MeshLab
  3. Session 2C: Positioning, Scaling, and Rotating your STL
  4. Session 2D: Editing Slic3r Recipes
  5. Session 2E: Slicing your STL and Viewing your GCODE
  6. Session 2F: Loading and Printing with Filaments

3: One STL with Multiple Heads

  1. Session 3A - Setting Two Heads to Z-Zero
    1. Session 3A - Alternate Version
  2. [[Session 3B - Calibrating the Offset Between Two Heads
    1. GCODE: Calibration Target
  3. Session 3C - Slicing and Printing with Second Head Support
  4. Session 3D - Clone or Parallel Printing

4: Multiple STLs with Multiple Heads

  1. Session 4 - Advanced Slicing and Printing: Multiple STLs with Multiple Heads

General Information

Filament Specific

Emulsifiable Specific

GCode, Modeling and Slicing

Troubleshooting, Maintenance and Tuning

Archives