Difference between revisions of "Materials"
Jump to navigation
Jump to search
| Line 11: | Line 11: | ||
! Fan Speed | ! Fan Speed | ||
! HotBed (°C) | ! HotBed (°C) | ||
! | ! Steps / nl | ||
! Verified? | ! Verified? | ||
|- | |- | ||
! [[ABS]] | ! [[ABS]] | ||
| [[MK1-250]] || | | [[MK1-250]] || 235 || 35 (=89%) || 80 || 0.78 || yes | ||
|- | |- | ||
! [[PLA]] | ! [[PLA]] | ||
| [[MK1-250]] || | | [[MK1-250]] || 180 || 35 (=89%) || 40 || 0.78 || yes | ||
|- | |- | ||
! [[PlastInk Rubber]] | ! [[PlastInk Rubber]] | ||
| [[MK1-250]] || | | [[MK1-250]] || 225 || 35 (=89%) || 50 || 0.78 || yes | ||
|- | |- | ||
! [[NinjaFlex]] | ! [[NinjaFlex]] | ||
| [[MK1-250]] || | | [[MK1-250]] || 225 || 35 (=89%) || 50 || 0.78 || yes | ||
|- | |- | ||
! [[Nylon]] | ! [[Nylon]] | ||
| [[MK1-250]] || | | [[MK1-250]] || 225 || 35 (=89%) || 80 || 0.78 || yes | ||
|- | |- | ||
! [[T-Glaze]] | ! [[T-Glaze]] | ||
| [[MK1-250]] || | | [[MK1-250]] || 235 || 35 (=89%) || 80 || 0.78 || yes | ||
|- | |- | ||
! [[BendLay]] | ! [[BendLay]] | ||
| [[MK1-250]] || | | [[MK1-250]] || 225 || 35 (=89%) || 50 || 0.78 || no | ||
|- | |- | ||
! [[LayBrick]] | ! [[LayBrick]] | ||
| [[MK1-250]] || | | [[MK1-250]] || 225 || 35 (=89%) || 80 || 0.78 || no | ||
|- | |- | ||
! [[LayWoo-d3]] | ! [[LayWoo-d3]] | ||
| [[MK1-250]] || | | [[MK1-250]] || 225 || 35 (=89%) || 80 || 0.78 || yes | ||
|- | |- | ||
! [[PET]] | ! [[PET]] | ||
| [[MK1-250]] || | | [[MK1-250]] || 210 || 35 (=89%) || 40 || 0.78 || no | ||
|- | |- | ||
! [[PVA]] | ! [[PVA]] | ||
| [[MK1-250]] || | | [[MK1-250]] || 210 || 35 (=89%) || 40 || 0.78 || no | ||
|- | |- | ||
! [[Clay]] | ! [[Clay]] | ||
Revision as of 13:31, 28 April 2015
Materials Printable on Hyrel Machines
The following is a list of materials with which the Hyrel machines can print; you can sort by any column:
| Material | Extruder | HotHead (°C) | Fan Speed | HotBed (°C) | Steps / nl | Verified? |
|---|---|---|---|---|---|---|
| ABS | MK1-250 | 235 | 35 (=89%) | 80 | 0.78 | yes |
| PLA | MK1-250 | 180 | 35 (=89%) | 40 | 0.78 | yes |
| PlastInk Rubber | MK1-250 | 225 | 35 (=89%) | 50 | 0.78 | yes |
| NinjaFlex | MK1-250 | 225 | 35 (=89%) | 50 | 0.78 | yes |
| Nylon | MK1-250 | 225 | 35 (=89%) | 80 | 0.78 | yes |
| T-Glaze | MK1-250 | 235 | 35 (=89%) | 80 | 0.78 | yes |
| BendLay | MK1-250 | 225 | 35 (=89%) | 50 | 0.78 | no |
| LayBrick | MK1-250 | 225 | 35 (=89%) | 80 | 0.78 | no |
| LayWoo-d3 | MK1-250 | 225 | 35 (=89%) | 80 | 0.78 | yes |
| PET | MK1-250 | 210 | 35 (=89%) | 40 | 0.78 | no |
| PVA | MK1-250 | 210 | 35 (=89%) | 40 | 0.78 | no |
| Clay | EMO-25, 19:1 EMO-25, 27:1 |
n/a | n/a | n/a | 1.75 2.30 |
yes |
| Metal Clay, Precious Metal Clay |
EMO-25, 19:1 EMO-25, 27:1 |
n/a | n/a | n/a | 1.75 2.30 |
yes |
| Porcelain | EMO-25, 19:1 EMO-25, 27:1 |
n/a | n/a | n/a | 1.75 2.30 |
yes |
| Plasticine | EMO-25, 19:1 EMO-25, 27:1 |
n/a | n/a | n/a | 1.75 2.30 |
yes |
| Plah-Doh | EMO-25, 19:1 EMO-25, 27:1 |
n/a | n/a | n/a | 1.75 2.30 |
yes |
| Sculpey | EMO-25, 19:1 EMO-25, 27:1 |
n/a | n/a | n/a | 1.75 2.30 |
yes |
| Sugru | EMO-25, 19:1 EMO-25, 27:1 |
n/a | n/a | n/a | 1.75 2.30 |
yes |
| RTV Silicone | EMO-25, 19:1 EMO-25, 27:1 |
n/a | n/a | n/a | 1.75 2.30 |
yes |