Revision as of 16:09, 28 April 2015

Materials Printable on Hyrel Machines

The following is a list of materials with which the Hyrel machines can print; you can sort by any column:

Material Reference Chart
Material	Extruder	HotHead (°C)	Fan Speed	HotBed (°C)	Steps / nl	Verified?
Polypropelyne	MK1-250	235	35 (=89%)	80	0.78	yes
Polycarbonate	MK1-350	350	35 (=89%)	80	0.78	yes
ABS	MK1-250	240/235	35 (=89%)	80	0.78	yes
PLA	MK1-250	185/180	35 (=89%)	40	0.78	yes
PlastInk Rubber	MK1-250	225	35 (=89%)	50	0.78	yes
NinjaFlex	MK1-250	225	35 (=89%)	50	0.78	yes
Nylon	MK1-250	225	35 (=89%)	80	0.78	yes
T-Glaze	MK1-250	225	35 (=89%)	80	0.78	yes
BendLay	MK1-250	225	35 (=89%)	50	0.78	no
LayBrick	MK1-250	225	35 (=89%)	80	0.78	no
LayWoo-d3	MK1-250	220/205	35 (=89%)	80	0.78	yes
PET	MK1-250	210	35 (=89%)	40	0.78	no
PVA	MK1-250	210	35 (=89%)	40	0.78	no
Clay	EMO-25, 19:1 EMO-25, 27:1	n/a	n/a	n/a	1.75 2.30	yes
Metal Clay, Precious Metal Clay	EMO-25, 19:1 EMO-25, 27:1	n/a	n/a	n/a	1.75 2.30	yes
Porcelain	EMO-25, 19:1 EMO-25, 27:1	n/a	n/a	n/a	1.75 2.30	yes
Plasticine	EMO-25, 19:1 EMO-25, 27:1	n/a	n/a	n/a	1.75 2.30	yes
Plah-Doh	EMO-25, 19:1 EMO-25, 27:1	n/a	n/a	n/a	1.75 2.30	yes
Sculpey	EMO-25, 19:1 EMO-25, 27:1	n/a	n/a	n/a	1.75 2.30	yes
Sugru	EMO-25, 19:1 EMO-25, 27:1	n/a	n/a	n/a	1.75 2.30	yes
RTV Silicone	EMO-25, 19:1 EMO-25, 27:1	n/a	n/a	n/a	1.75 2.30	yes

@@ Line 21: / Line 21: @@
 |-
 ! [[ABS]]
-| [[MK1-250]] || 235 || 35 (=89%) || 80 || 0.78 || yes
+| [[MK1-250]] || 240/235 || 35 (=89%) || 80 || 0.78 || yes
 |-
 ! [[PLA]]
-| [[MK1-250]] || 180 || 35 (=89%) || 40 || 0.78 || yes
+| [[MK1-250]] || 185/180 || 35 (=89%) || 40 || 0.78 || yes
 |-
 ! [[PlastInk Rubber]]
@@ Line 45: / Line 45: @@
 |-
 ! [[LayWoo-d3]]
-| [[MK1-250]] || 225 || 35 (=89%) || 80 || 0.78 || yes
+| [[MK1-250]] || 220/205 || 35 (=89%) || 80 || 0.78 || yes
 |-
 ! [[PET]]