Difference between revisions of "Materials"

From Hyrel3D
Jump to navigation Jump to search
Line 14: Line 14:
! Verified?
! Verified?
|-
|-
! [[Polypropelyne]]
! [http://en.wikipedia.org/wiki/Acrylonitrile_butadiene_styrene ABS]
| [[MK1-250]] || 235 || 35 (=89%) || 80 || 0.78 || yes
|-
! [[Polycarbonate]]
| [[MK1-350]] || 350 || 35 (=89%) || 80 || 0.78 || yes
|-
! [[ABS]]
| [[MK1-250]] || 240/235 || 35 (=89%) || 80 || 0.78 || yes
| [[MK1-250]] || 240/235 || 35 (=89%) || 80 || 0.78 || yes
|-
|-
! [[PLA]]
! [http://en.wikipedia.org/wiki/Polylactic_acid PLA]
| [[MK1-250]] || 185/180 || 35 (=89%) || 40 || 0.78 || yes
| [[MK1-250]] || 185/180 || 35 (=89%) || 40 || 0.78 || yes
|-
|-
! [[PlastInk Rubber]]
! [http://www.plastink.com/en/product-category/rubber-o-175-mm-500-g/ PlastInk Rubber]
| [[MK1-250]] || 225 || 35 (=89%) || 50 || 0.78 || yes
| [[MK1-250]] || 225 || 35 (=89%) || 50 || 0.78 || yes
|-
|-
! [[NinjaFlex]]
! [http://www.ninjaflex3d.com/products/ninjaflex-filaments/ NinjaFlex]
| [[MK1-250]] || 225 || 35 (=89%) || 50 || 0.78 || yes
| [[MK1-250]] || 225 || 35 (=89%) || 50 || 0.78 || yes
|-
|-
! [[Nylon]]
! [http://en.wikipedia.org/wiki/Nylon Nylon]
| [[MK1-250]] || 225 || 35 (=89%) || 80 || 0.78 || yes
| [[MK1-250]] || 225 || 35 (=89%) || 80 || 0.78 || yes
|-
|-
! [[T-Glaze]]
! [http://taulman3d.com/t-glase-features.html T-Glase]
| [[MK1-250]] || 225 || 35 (=89%) || 80 || 0.78 || yes
| [[MK1-250]] || 225 || 35 (=89%) || 80 || 0.78 || yes
|-
|-
! [[BendLay]]
! [http://www.orbi-tech.de/shop/3D-Filamente/BendLay:::72_121.html BendLay]
| [[MK1-250]] || 225 || 35 (=89%) || 50 || 0.78 || no
| [[MK1-250]] || 225 || 35 (=89%) || 50 || 0.78 || no
|-
|-
! [[LayBrick]]
! [http://www.orbi-tech.de/shop/3D-Filaments/LayBrick:::72_75.html?MODsid=95020b9aa2c5bc5db17abfa692228995 LayBrick]
| [[MK1-250]] || 225 || 35 (=89%) || 80 || 0.78 || no
| [[MK1-250]] || 225 || 35 (=89%) || 80 || 0.78 || no
|-
|-
! [[LayWoo-d3]]
! [http://www.orbi-tech.de/shop/3D-Filaments/LayWoo-d3:::72_76.html LayWoo-d3]
| [[MK1-250]] || 220/205 || 35 (=89%) || 80 || 0.78 || yes
| [[MK1-250]] || 220/205 || 35 (=89%) || 80 || 0.78 || yes
|-
|-
! [[PET]]
! [http://en.wikipedia.org/wiki/Polyethylene_terephthalate PET]
| [[MK1-250]] || 210 || 35 (=89%) || 40 || 0.78 || no
| [[MK1-250]] || 210 || 35 (=89%) || 40 || 0.78 || no
|-
|-
! [[PVA]]
! [http://en.wikipedia.org/wiki/Polyvinyl_alcohol PVA]
| [[MK1-250]] || 210 || 35 (=89%) || 40 || 0.78 || no
| [[MK1-250]] || 210 || 35 (=89%) || 40 || 0.78 || no
|-
|-
! [[Clay]]
! [http://en.wikipedia.org/wiki/Clay Clay]
| [[EMO-25]], 19:1 <br/> [[EMO-25]], 27:1 || n/a || n/a || n/a || 1.75 <br/> 2.30 || yes
| [[EMO-25]], 19:1 <br/> [[EMO-25]], 27:1 || n/a || n/a || n/a || 1.75 <br/> 2.30 || yes
|-
|-
! [[Metal Clay]], <br/> [[Precious Metal Clay]]
! [http://en.wikipedia.org/wiki/Metal_clay Metal Clay], <br/> [http://en.wikipedia.org/wiki/Metal_clay#Precious_Metal_Clay_.28PMC.29 Precious Metal Clay]
| [[EMO-25]], 19:1 <br/> [[EMO-25]], 27:1 || n/a || n/a || n/a || 1.75 <br/> 2.30 || yes
| [[EMO-25]], 19:1 <br/> [[EMO-25]], 27:1 || n/a || n/a || n/a || 1.75 <br/> 2.30 || yes
|-
|-
! [[Porcelain]]
! [http://en.wikipedia.org/wiki/Polypropylene Polypropylene]
| [[MK1-250]] || 235 || 35 (=89%) || 80 || 0.78 || yes
|-
! [http://en.wikipedia.org/wiki/Polycarbonate Polycarbonate]
| [[MK1-350]] || 350 || 35 (=89%) || 80 || 0.78 || yes
|-
! [http://en.wikipedia.org/wiki/Porcelain Porcelain]
| [[EMO-25]], 19:1 <br/> [[EMO-25]], 27:1 || n/a || n/a || n/a || 1.75 <br/> 2.30 || yes
| [[EMO-25]], 19:1 <br/> [[EMO-25]], 27:1 || n/a || n/a || n/a || 1.75 <br/> 2.30 || yes
|-
|-
! [[Plasticine]]
! [http://en.wikipedia.org/wiki/Plasticine Plasticine]
| [[EMO-25]], 19:1 <br/> [[EMO-25]], 27:1 || n/a || n/a || n/a || 1.75 <br/> 2.30 || yes
| [[EMO-25]], 19:1 <br/> [[EMO-25]], 27:1 || n/a || n/a || n/a || 1.75 <br/> 2.30 || yes
|-
|-
! [[Plah-Doh]]
! [http://www.hasbro.com/playdoh/en_AU/ Plah-Doh]
| [[EMO-25]], 19:1 <br/> [[EMO-25]], 27:1 || n/a || n/a || n/a || 1.75 <br/> 2.30 || yes
| [[EMO-25]], 19:1 <br/> [[EMO-25]], 27:1 || n/a || n/a || n/a || 1.75 <br/> 2.30 || yes
|-
|-
! [[Sculpey]]
! [http://www.sculpey.com/ Sculpey]
| [[EMO-25]], 19:1 <br/> [[EMO-25]], 27:1 ||| n/a || n/a || n/a || 1.75 <br/> 2.30 || yes
| [[EMO-25]], 19:1 <br/> [[EMO-25]], 27:1 ||| n/a || n/a || n/a || 1.75 <br/> 2.30 || yes
|-
|-
! [[Sugru]]
! [https://sugru.com/ Sugru]
| [[EMO-25]], 19:1 <br/> [[EMO-25]], 27:1 || n/a || n/a || n/a || 1.75 <br/> 2.30 || yes
| [[EMO-25]], 19:1 <br/> [[EMO-25]], 27:1 || n/a || n/a || n/a || 1.75 <br/> 2.30 || yes
|-
|-
! [[RTV Silicone]]
! [http://en.wikipedia.org/wiki/RTV_silicone RTV Silicone]
| [[EMO-25]], 19:1 <br/> [[EMO-25]], 27:1 ||| n/a || n/a || n/a || 1.75 <br/> 2.30 || yes
| [[EMO-25]], 19:1 <br/> [[EMO-25]], 27:1 ||| n/a || n/a || n/a || 1.75 <br/> 2.30 || yes
|-
|-
|}
|}

Revision as of 16:27, 28 April 2015

Materials Printable on Hyrel Machines

The following is a list of materials with which the Hyrel machines can print; you can sort by any column:

Material Reference Chart
Material Extruder HotHead (°C) Fan Speed HotBed (°C) Steps / nl Verified?
ABS MK1-250 240/235 35 (=89%) 80 0.78 yes
PLA MK1-250 185/180 35 (=89%) 40 0.78 yes
PlastInk Rubber MK1-250 225 35 (=89%) 50 0.78 yes
NinjaFlex MK1-250 225 35 (=89%) 50 0.78 yes
Nylon MK1-250 225 35 (=89%) 80 0.78 yes
T-Glase MK1-250 225 35 (=89%) 80 0.78 yes
BendLay MK1-250 225 35 (=89%) 50 0.78 no
LayBrick MK1-250 225 35 (=89%) 80 0.78 no
LayWoo-d3 MK1-250 220/205 35 (=89%) 80 0.78 yes
PET MK1-250 210 35 (=89%) 40 0.78 no
PVA MK1-250 210 35 (=89%) 40 0.78 no
Clay EMO-25, 19:1
EMO-25, 27:1		 n/a n/a n/a 1.75
2.30		 yes
Metal Clay,
Precious Metal Clay 		EMO-25, 19:1
EMO-25, 27:1		 n/a n/a n/a 1.75
2.30		 yes
Polypropylene MK1-250 235 35 (=89%) 80 0.78 yes
Polycarbonate MK1-350 350 35 (=89%) 80 0.78 yes
Porcelain EMO-25, 19:1
EMO-25, 27:1		 n/a n/a n/a 1.75
2.30		 yes
Plasticine EMO-25, 19:1
EMO-25, 27:1		 n/a n/a n/a 1.75
2.30		 yes
Plah-Doh EMO-25, 19:1
EMO-25, 27:1		 n/a n/a n/a 1.75
2.30		 yes
Sculpey EMO-25, 19:1
EMO-25, 27:1		 n/a n/a n/a 1.75
2.30		 yes
Sugru EMO-25, 19:1
EMO-25, 27:1		 n/a n/a n/a 1.75
2.30		 yes
RTV Silicone EMO-25, 19:1
EMO-25, 27:1		 n/a n/a n/a 1.75
2.30		 yes
Retrieved from "https://hyrel3d.in/wiki/index.php?title=Materials&oldid=182"