Difference between revisions of "Materials"
Jump to navigation
Jump to search
| Line 14: | Line 14: | ||
! Fan Speed* | ! Fan Speed* | ||
! HotBed (°C) | ! HotBed (°C) | ||
! | ! v2.x mm/sec | ||
! v3/4.x mm/sec | |||
|- | |- | ||
! [http://en.wikipedia.org/wiki/Acrylonitrile_butadiene_styrene ABS] | ! [http://en.wikipedia.org/wiki/Acrylonitrile_butadiene_styrene ABS] | ||
| [[MK1-250]] || 240/235 || 10 (=25.5%) || 80 || 2000 | | [[MK1-250]] || 240/235 || 10 (=25.5%) || 80 || 2000 || 4000 | ||
|- | |- | ||
! [http://en.wikipedia.org/wiki/Polylactic_acid PLA] | ! [http://en.wikipedia.org/wiki/Polylactic_acid PLA] | ||
| [[MK1-250]] || 185/180 || 10 (=25.5%) || 40 || 2000 | | [[MK1-250]] || 185/180 || 10 (=25.5%) || 40 || 2000 || 4000 | ||
|- | |- | ||
! [http://www.plastink.com/en/product-category/rubber-o-175-mm-500-g/ PlastInk Rubber] | ! [http://www.plastink.com/en/product-category/rubber-o-175-mm-500-g/ PlastInk Rubber] | ||
| [[MK1-250]] || 225 || 10 (=25.5%) || 50 || 2000 | | [[MK1-250]] || 225 || 10 (=25.5%) || 50 || 2000 || 4000 | ||
|- | |- | ||
! [http://www.ninjaflex3d.com/products/ninjaflex-filaments/ NinjaFlex] | ! [http://www.ninjaflex3d.com/products/ninjaflex-filaments/ NinjaFlex] | ||
| [[MK1-250]] || 225 || 10 (=25.5%) || 50 || 2000 | | [[MK1-250]] || 225 || 10 (=25.5%) || 50 || 2000 || 4000 | ||
|- | |- | ||
! [http://en.wikipedia.org/wiki/Nylon Nylon] | ! [http://en.wikipedia.org/wiki/Nylon Nylon] | ||
| [[MK1-250]] || 225 || 10 (=25.5%) || 80 || 2000 | | [[MK1-250]] || 225 || 10 (=25.5%) || 80 || 2000 || 4000 | ||
|- | |- | ||
! [http://taulman3d.com/t-glase-features.html T-Glase] | ! [http://taulman3d.com/t-glase-features.html T-Glase] | ||
| [[MK1-250]] || 225 || 10 (=25.5%) || 80 || 2000 | | [[MK1-250]] || 225 || 10 (=25.5%) || 80 || 2000 || 4000 | ||
|- | |- | ||
! [http://www.orbi-tech.de/shop/3D-Filamente/BendLay:::72_121.html BendLay] | ! [http://www.orbi-tech.de/shop/3D-Filamente/BendLay:::72_121.html BendLay] | ||
| [[MK1-250]] || 225 || 10 (=25.5%) || 50 || 500 | | [[MK1-250]] || 225 || 10 (=25.5%) || 50 || 500 || 500 | ||
|- | |- | ||
! [http://www.orbi-tech.de/shop/3D-Filaments/LayBrick:::72_75.html?MODsid=95020b9aa2c5bc5db17abfa692228995 LayBrick] | ! [http://www.orbi-tech.de/shop/3D-Filaments/LayBrick:::72_75.html?MODsid=95020b9aa2c5bc5db17abfa692228995 LayBrick] | ||
| [[MK1-250]] || 225 || 10 (=25.5%) || 80 || 500 | | [[MK1-250]] || 225 || 10 (=25.5%) || 80 || 500 || 500 | ||
|- | |- | ||
! [http://www.orbi-tech.de/shop/3D-Filaments/LayWoo-d3:::72_76.html LayWoo-d3] | ! [http://www.orbi-tech.de/shop/3D-Filaments/LayWoo-d3:::72_76.html LayWoo-d3] | ||
| [[MK1-250]] || 220/205 || 10 (=25.5%) || 80 || 2000 | | [[MK1-250]] || 220/205 || 10 (=25.5%) || 80 || 2000 || 4000 | ||
|- | |- | ||
! [http://en.wikipedia.org/wiki/Polyethylene_terephthalate PET] | ! [http://en.wikipedia.org/wiki/Polyethylene_terephthalate PET] | ||
| [[MK1-250]] || 210 || 10 (=25.5%) || 40 || 500 | | [[MK1-250]] || 210 || 10 (=25.5%) || 40 || 500 || 500 | ||
|- | |- | ||
! [http://en.wikipedia.org/wiki/Polyvinyl_alcohol PVA] | ! [http://en.wikipedia.org/wiki/Polyvinyl_alcohol PVA] | ||
| [[MK1-250]] || 210 || 10 (=25.5%) || 40 || 500 | | [[MK1-250]] || 210 || 10 (=25.5%) || 40 || 500 || 500 | ||
|- | |- | ||
! [http://en.wikipedia.org/wiki/Clay Clay] | ! [http://en.wikipedia.org/wiki/Clay Clay] | ||
| [[EMO-25]] || n/a || n/a || n/a || 2000 | | [[EMO-25]] || n/a || n/a || n/a || 2000 || 4000 | ||
|- | |- | ||
! [http://en.wikipedia.org/wiki/Metal_clay Metal Clay], <br/> [http://en.wikipedia.org/wiki/Metal_clay#Precious_Metal_Clay_.28PMC.29 Precious Metal Clay] | ! [http://en.wikipedia.org/wiki/Metal_clay Metal Clay], <br/> [http://en.wikipedia.org/wiki/Metal_clay#Precious_Metal_Clay_.28PMC.29 Precious Metal Clay] | ||
| [[EMO-25]] || n/a || n/a || n/a || 2000 | | [[EMO-25]] || n/a || n/a || n/a || 2000 || 4000 | ||
|- | |- | ||
! [http://en.wikipedia.org/wiki/Polypropylene Polypropylene] | ! [http://en.wikipedia.org/wiki/Polypropylene Polypropylene] | ||
| [[MK1-250]] || 235 || 10 (=25.5%) || 80 || 2000 | | [[MK1-250]] || 235 || 10 (=25.5%) || 80 || 2000 || 4000 | ||
|- | |- | ||
! [http://en.wikipedia.org/wiki/Polycarbonate Polycarbonate] | ! [http://en.wikipedia.org/wiki/Polycarbonate Polycarbonate] | ||
| [[MK1-350]] || 350 || 10 (=25.5%) || 80 || 2000 | | [[MK1-350]] || 350 || 10 (=25.5%) || 80 || 2000 || 4000 | ||
|- | |- | ||
! [http://en.wikipedia.org/wiki/Porcelain Porcelain] | ! [http://en.wikipedia.org/wiki/Porcelain Porcelain] | ||
| [[EMO-25]] || n/a || n/a || n/a || 2000 | | [[EMO-25]] || n/a || n/a || n/a || 2000 || 4000 | ||
|- | |- | ||
! [http://en.wikipedia.org/wiki/Plasticine Plasticine] | ! [http://en.wikipedia.org/wiki/Plasticine Plasticine] | ||
| [[EMO-25]] || n/a || n/a || n/a || 2000 | | [[EMO-25]] || n/a || n/a || n/a || 2000 || 4000 | ||
|- | |- | ||
! [http://www.hasbro.com/playdoh/en_AU/ Play-Doh] | ! [http://www.hasbro.com/playdoh/en_AU/ Play-Doh] | ||
| [[EMO-25]] || n/a || n/a || n/a || 2000 | | [[EMO-25]] || n/a || n/a || n/a || 2000 || 4000 | ||
|- | |- | ||
! [http://www.sculpey.com/ Sculpey] | ! [http://www.sculpey.com/ Sculpey] | ||
| [[EMO-25]] ||| n/a || n/a || n/a || 2000 | | [[EMO-25]] ||| n/a || n/a || n/a || 2000 || 4000 | ||
|- | |- | ||
! [https://sugru.com/ Sugru] | ! [https://sugru.com/ Sugru] | ||
| [[EMO-25]] || n/a || n/a || n/a || 2000 | | [[EMO-25]] || n/a || n/a || n/a || 2000 || 4000 | ||
|- | |- | ||
! [http://en.wikipedia.org/wiki/RTV_silicone RTV Silicone] | ! [http://en.wikipedia.org/wiki/RTV_silicone RTV Silicone] | ||
| [[EMO-25]] ||| n/a || n/a || n/a || 2000 | | [[EMO-25]] ||| n/a || n/a || n/a || 2000 || 4000 | ||
|- | |- | ||
|} | |} | ||
Revision as of 22:16, 1 February 2018
A huge variety of materials can be printed with various extruders on the Hyrel machines. Below are the recipes we have so far...
Materials Printable on Hyrel Machines
The following is a list of materials with which the Hyrel machines can print; you can sort by any column:
| Material | Extruder | Head (°C) | Fan Speed* | HotBed (°C) | v2.x mm/sec | v3/4.x mm/sec |
|---|---|---|---|---|---|---|
| ABS | MK1-250 | 240/235 | 10 (=25.5%) | 80 | 2000 | 4000 |
| PLA | MK1-250 | 185/180 | 10 (=25.5%) | 40 | 2000 | 4000 |
| PlastInk Rubber | MK1-250 | 225 | 10 (=25.5%) | 50 | 2000 | 4000 |
| NinjaFlex | MK1-250 | 225 | 10 (=25.5%) | 50 | 2000 | 4000 |
| Nylon | MK1-250 | 225 | 10 (=25.5%) | 80 | 2000 | 4000 |
| T-Glase | MK1-250 | 225 | 10 (=25.5%) | 80 | 2000 | 4000 |
| BendLay | MK1-250 | 225 | 10 (=25.5%) | 50 | 500 | 500 |
| LayBrick | MK1-250 | 225 | 10 (=25.5%) | 80 | 500 | 500 |
| LayWoo-d3 | MK1-250 | 220/205 | 10 (=25.5%) | 80 | 2000 | 4000 |
| PET | MK1-250 | 210 | 10 (=25.5%) | 40 | 500 | 500 |
| PVA | MK1-250 | 210 | 10 (=25.5%) | 40 | 500 | 500 |
| Clay | EMO-25 | n/a | n/a | n/a | 2000 | 4000 |
| Metal Clay, Precious Metal Clay |
EMO-25 | n/a | n/a | n/a | 2000 | 4000 |
| Polypropylene | MK1-250 | 235 | 10 (=25.5%) | 80 | 2000 | 4000 |
| Polycarbonate | MK1-350 | 350 | 10 (=25.5%) | 80 | 2000 | 4000 |
| Porcelain | EMO-25 | n/a | n/a | n/a | 2000 | 4000 |
| Plasticine | EMO-25 | n/a | n/a | n/a | 2000 | 4000 |
| Play-Doh | EMO-25 | n/a | n/a | n/a | 2000 | 4000 |
| Sculpey | EMO-25 | n/a | n/a | n/a | 2000 | 4000 |
| Sugru | EMO-25 | n/a | n/a | n/a | 2000 | 4000 |
| RTV Silicone | EMO-25 | n/a | n/a | n/a | 2000 | 4000 |
- Note: Be sure the fan directs air to the material and not directly at the nozzle.
- Note: In Slic3r, you should slice with a fan value between 0 and 39, which will result in a fan speed between 0 and 99, since we have our fans run between 0 and 100, not between 0 and 255 like other printers. Also note that we leave the fan OFF for the first five layers.