Difference between revisions of "Videos"

From Hyrel3D
Jump to navigation Jump to search
Line 13: Line 13:


http://hyrel3d.net/wiki/index.php/Main_Page#Comparison
http://hyrel3d.net/wiki/index.php/Main_Page#Comparison
=== 2018-2019 ===


{| border="1" class="wikitable sortable" style="text-align: center"  
{| border="1" class="wikitable sortable" style="text-align: center"  
|+ Table of Video Links
|+ Table of Video Links, 2018-2019
! style="width: 10%"|Thumbnail
! style="width: 10%"|Thumbnail
! style="width: 10%"|Title
! style="width: 10%"|Title
Line 1,245: Line 1,247:
| PNP Pick and Place
| PNP Pick and Place
| n/a
| n/a
|-
! [[File:OceUiuTixPA.png|200px]]
| LA6-450: 6w, 450nm Diode Laser Head
| https://www.youtube.com/watch?v=OceUiuTixPA
| 2015.12.22
| Any
| Hardware
| Introduction
| LA6-450
| n/a
|-
! [[File:vmw0LS_f9V0E.png|200px]]
| 3D Printing RTV Silicone
| https://www.youtube.com/watch?v=vmw0LS_f9V0
| 2015.12.18
| Any
| Hardware
| Demonstration
| SDS-Series
| n/a
|-
! [[File:YWe3TQGgNW0.png|200px]]
| Loading the VCD-25
| https://www.youtube.com/watch?v=YWe3TQGgNW0
| 2015.12.09
| Any
| Hardware
| Instruction
| VCD-25
| n/a
|-
! [[File:huJuexTLbYA.png|200px]]
| Short Porcelain Print Demo
| https://www.youtube.com/watch?v=huJuexTLbYA
| 2015.12.08
| Any
| Hardware
| Demonstration
| EMO-25
| n/a
|-
! [[File:b583I7AlGJI.png|200px]]
| Replacing the Tablet Interface Board
| https://www.youtube.com/watch?v=b583I7AlGJI
| 2015.11.25
| System 30M, EHR
| Hardware
| Instruction
| n/a
| n/a
|-
! [[File:ZKAzXoJ0q8Y.png|200px]]
| 2016 Design Contest Video
| https://www.youtube.com/watch?v=ZKAzXoJ0q8Y
| 2015.11.17
| System 30M
| Hardware
| Contest
| All
| n/a
|-
! [[File:YRsyEGHyt3k.png|200px]]
| DXF to Laser Gcode Generation
| https://www.youtube.com/watch?v=YRsyEGHyt3k
| 2015.10.20
| Any
| Software
| Instruction
| Laser, Spindle Tool
| n/a
|-
! [[File:Om9cjxMXuxY.png|200px]]
| Printing PEEK (PolyEther Ether Ketone) and PC (PolyCarbonate)
| https://www.youtube.com/watch?v=Om9cjxMXuxY
| 2015.09.29
| Any
| Hardware
| Demonstration
| MK1-450
| n/a
|-
! [[File:IreaoCfQ8mE.png|200px]]
| Healing with MeshLab
| https://www.youtube.com/watch?v=IreaoCfQ8mE
| 2015.09.01
| Any
| Software
| Instruction
| Any
| n/a
|-
! [[File:0Aj9WCabPgw.png|200px]]
| Postprocessing with a Heat Gun
| https://www.youtube.com/watch?v=0Aj9WCabPgw
| 2015.08.17
| Any
| Hardware
| Instruction
| Any
| n/a
|-
! [[File:4oxCqR_DVNQ.png|200px]]
| Introduction to Hyrel 3D Possibilities, 2015
| https://www.youtube.com/watch?v=4oxCqR_DVNQ
| 2015.08.11
| All
| Hardware
| Introduction
| All
| n/a
|-
! [[File:n4QwiuQtjO0.png|200px]]
| Updating to Repetrel 2 4xx
| https://www.youtube.com/watch?v=n4QwiuQtjO0
| 2015.08.06
| All
| Software
| Instruction
| n/a
| n/a
|-
! [[File:cFAFRkpLmww.png|200px]]
| Updating your 407 Motion Controller
| https://www.youtube.com/watch?v=cFAFRkpLmww
| 2015.07.24
| All
| Software
| Instruction
| n/a
| n/a
|-
! [[File:XKCEkKSolZc.png|200px]]
| Replacing the HOTHEAD controller
| https://www.youtube.com/watch?v=XKCEkKSolZc
| 2015.07.23
| All
| Hardware
| Instruction
| n/a
| n/a
|-
! [[File:YM8QMZBTb4o.png|200px]]
| Programming the HOTBED controller on the System 30M and ESR
| https://www.youtube.com/watch?v=yM8QMZBTb4o
| 2015.07.22
| All
| Software
| Instruction
| n/a
| n/a
|-
! [[File:CuRcIE-Jbyc.jpg|200px]]
| Printing with Cloning - three heads in Parallel
| https://www.youtube.com/watch?v=cuRcIE-Jbyc
| 2015.07.21
| All
| Software
| Instruction
| n/a
| n/a
|-
! [[File:VMyS3h4qiSA.jpg|200px]]
| Older Instructions, Slicing for Multiple Head Support
| https://www.youtube.com/watch?v=VMyS3h4qiSA
| 2015.07.17
| All
| Software
| Slicing
| Any
| n/a
|-
! [[File:0gFX6Mh-ths.png|200px]]
| Leveling the X-Arm on System 30M, Engine SR
| https://www.youtube.com/watch?v=0gFX6Mh-ths
| 2015.06.02
| System 30M, Engine SR
| Hardware
| Instruction
| n/a
| n/a
|-
! [[File:LZd0ecogGlQ.png|200px]]
| Correcting Y-Arm Flexation Fix on the System 30M, Engine SR
| https://www.youtube.com/watch?v=LZd0ecogGlQ
| 2015.03.18
| System 30M, Engine SR
| Hardware
| Instruction
| n/a
| n/a
|-
! [[File:ArDX4UpflmE.png|200px]]
| Manually Setting the Z-Zero Position
| https://www.youtube.com/watch?v=ArDX4UpflmE
| 2015.03.09
| System 30M, Engine SR
| Hardware
| Instruction
| n/a
| n/a
|-
! [[File:vc9gBZtUL7c.png|200px]]
| Picking Right 3D Printer For You
| https://www.youtube.com/watch?v=vc9gBZtUL7c
| 2015.02.08
| All
| Hardware
| Overview
| All
| n/a
|-
! [[File:66S9XJ-KeU8.png|200px]]
| Changing the Main I/O Board, System 30M, EHR, ESR
| https://www.youtube.com/watch?v=66S9XJ-KeU8
| 2015.02.12
| All
| Hardware
| Overview
| All
| n/a
|-
! [[File:YEePz8_0ttc.png|200px]]
| Laser Test Print
| https://www.youtube.com/watch?v=yEePz8_0ttc
| 2015.02.17
| All
| Hardware
| Demonstration
| LA5-808 Diode Laser
| n/a
|-
! [[File:tLHpaePTP-k.png|200px]]
| EMO Series Printing Tips
| https://www.youtube.com/watch?v=tLHpaePTP-k
| 2015.02.10
| All
| Hardware
| Instruction
| EMO Series (EMO, COD, VOL, VCD, KRA, KCD, KR2, KC2)
| n/a
|-
! [[File:Zl1sqy6PWx8.jpg|200px]]
| Changing Power Supplies in the 30M and ESR
| https://www.youtube.com/watch?v=Zl1sqy6PWx8
| 2015.02.04
| 30M, ESR
| Hardware
| Instruction
| Any
| n/a
|-
! [[File:IQscrgv6uaQ.png|200px]]
| Multi-Head Calibration Guide
| https://www.youtube.com/watch?v=IQscrgv6uaQ
| 2015.02.03
| Any
| Hardware/Software
| Instruction
| Any
| n/a
|-
! [[File:0lpa4nENtyQ.png|200px]]
| LA5-808 "Shark V" Diode Laser
| https://www.youtube.com/watch?v=0lpa4nENtyQ
| 2015.01.14
| Any
| Hardware
| Introduction
| LA5-808
| n/a
|-
! [[File:mPYPWjnDGho.png|200px]]
| Luer Tip Kit for EMO and SDS Series Print Heads
| https://www.youtube.com/watch?v=mPYPWjnDGho
| 2014.12.23
| Any
| Hardware
| Introduction
| LTK
| n/a
|-
! [[File:-VHxf182fIs.png|200px]]
| Print Head SDK
| https://www.youtube.com/watch?v=-VHxf182fIs
| 2014.12.09
| All
| Hardware, Software
| Introduction
| SDK
| n/a
|-
! [[File:Fg9omXlYR-Q.png|200px]]
| MK Series Printing Tips
| https://www.youtube.com/watch?v=Fg9omXlYR-Q
| 2014.11.12
| All
| Procedure
| Instruction
| MK Series
| n/a
|-
! [[File:EosKDe-SyUI.png|200px]]
| Replacing fuses (old) on the Yoke
| https://www.youtube.com/watch?v=EosKDe-SyUI
| 2014.08.27
| ALL
| Hardware
| Instruction
| All
| n/a
|-
! [[File:4yuzpUqeE-Y.png|200px]]
| Loading the EMO-type Reservoirs
| https://www.youtube.com/watch?v=4yuzpUqeE-Y
| 2014.04.23
| ALL
| Hardware
| Instruction
| EMO, COD, VOL, VCD, KRA, KCD, KR2, KC2
| n/a
|-
! [[File:xQFacnpzmv0.png|200px]]
| Changing the Economics of 3D Printing
| https://www.youtube.com/watch?v=xQFacnpzmv0
| 2013.12.24
| All
| Hardware
| Demonstration
| n/a
| n/a
|-
! [[File:c9HvQ3SepoM.png|200px]]
| System 30 Product Release
| https://www.youtube.com/watch?v=c9HvQ3SepoM
| 2013.10.29
| System 30
| Hardware, Software
| Introduction
| n/a
| n/a
|-
! [[File:P6aMBQSZPgg.png|200px]]
| Simultaneous 3D Printing of Multiple Parts
| https://www.youtube.com/watch?v=P6aMBQSZPgg
| 2013.07.02
| All
| Hardware, Software
| Demonstration
| MK1-250
| n/a
|-
! [[File:nuii5rP53Js.png|200px]]
| 3D Printing with Sugru The Amazing Self-Setting Rubber
| https://www.youtube.com/watch?v=nuii5rP53Js
| 2013.06.19
| Any
| Hardware
| Demonstration
| EMO-25
| n/a
|-
! [[File:dihvAQR7LQg.png|200px]]
| 3D Printing with Play-Doh
| https://www.youtube.com/watch?v=dihvAQR7LQg
| 2013.06.04
| All
| Hardware
| Demonstration
| EMO-25
| n/a
|-
! [[File:cw8XiW46G0k.png|200px]]
| 3D Printing with Plasticine
| https://www.youtube.com/watch?v=cw8XiW46G0k
| 2013.04.13
| Any
| Hardware
| Demonstration
| EMO-25
| n/a
|-
! [[File:trdz4YDbdsw.png|200px]]
| 3D Printing with Air-Dry Modeling Clay
| https://www.youtube.com/watch?v=trdz4YDbdsw
| 2013.04.06
| Any
| Hardware
| Demonstration
| EMO-25
| n/a
|-
! [[File:XNwv7Dw_Zwg.png|200px]]
| Interchangeable Hot-Swappable Heads
| https://www.youtube.com/watch?v=XNwv7Dw_Zwg
| 2013.05.12
| Any
| Hardware, Software
| Demonstration
| MK1-250
| n/a
|-
! [[File:mu9xMmkZFns.png|200px]]
| Thank you, Kickstarters!
| https://www.youtube.com/watch?v=mu9xMmkZFns
| 2012.11.05
| All
| Hardware, Software
| Thank You
| n/a
| n/a
|-
! [[File:Z9rgkw5r4l4.png|200px]]
| Quick Tour of our Main Shop!
| https://www.youtube.com/watch?v=Z9rgkw5r4l4
| 2012.10.17
| All
| Introduction
| Thank You
| n/a
| n/a
|}
=== 2016-2017 ===
{| border="1" class="wikitable sortable" style="text-align: center"
|+ Table of Video Links, 2016-2017
! style="width: 10%"|Thumbnail
! style="width: 10%"|Title
! style="width: 10%"|Link
! style="width: 10%"|Date
! style="width: 10%"|Model
! style="width: 10%"|Category
! style="width: 10%"|Activity
! style="width: 10%"|Material Type
! style="width: 10%"|Other
|-
! [[File:B0lvN-aPYHI.png|200px]]
| Five Axis Machining on a Hyrel Hydra
| https://www.youtube.com/watch?v=B0lvN-aPYHI
| 2019.05.24
| Hydra
| Hardware
| Machining
| Rotating
| Extra Axes
|-
! [[File:CmBaHHAfbEo.png|200px]]
| Dispensing RTV Silicone on a Hyrel Hydra
| https://www.youtube.com/watch?v=CmBaHHAfbEo
| 2019.05.21
| Hydra
| Hardware
| RTV Silicone
| SDS-30
| Silicone
|-
! [[File:G526vFi8yWI.png|200px]]
| Machining PTFE (Teflon) on a Hyrel Hydra
| https://www.youtube.com/watch?v=G526vFi8yWI
| 2019.05.08
| Hydra
| Hardware
| Machining
| Spindle Tool
| PTFE
|-
! [[File:LfmssRdZwuE.jpg|200px]]
| Rotating Head Prototype
| https://www.youtube.com/watch?v=LfmssRdZwuE
| 2019.05.08
| Hydra
| Hardware
| Filament
| Rotating
| n/a
|-
! [[File:CbxB96oZFGE.jpg|200px]]
| Installing the new Power Supply in a Hyrel Hydra
| https://www.youtube.com/watch?v=CbxB96oZFGE
| 2018.08.13
| Hydra
| Hardware
| 4th Axis
| 5th Axis
| n/a
|-
! [[File:KrwOviaCZuw.jpg|200px]]
| Hyrel Tapping Enabled
| https://www.youtube.com/watch?v=krwOviaCZuw
| 2018.08.07
| Hydra
| Hardware
| Spindle Tool
| Tapping
| n/a
|-
! [[File:QuIM9XSYMxE.jpg|200px]]
| Light Duty Milling with 3-Phase Spindle on a Hyrel Hydra
| https://www.youtube.com/watch?v=QuIM9XSYMxE
| 2018.08.02
| Hydra
| Hardware
| Spindle Tool
| Milling
| n/a
|-
! [[File:Ni56OFo1VvM.jpg|200px]]
| Improved UV Light Source for more Powerful Crosslinking
| https://www.youtube.com/watch?v=ni56OFo1VvM
| 2018.07.20
| Any
| Hardware
| EMO, SDS
| n/a
| n/a
|-
! [[File:68oktmbp8r0.png|200px]]
| How to install 4th and 5th Axes on a Hyrel Hydra
| https://www.youtube.com/watch?v=68oktmbp8r0
| 2018.06.26
| Hydra
| Hardware
| 4th Axis
| 5th Axis
| n/a
|-
! [[File:7DcqbBzs-ZQ.png|200px]]
| How to use an additional Yoke on a Hyrel Hydra
| https://www.youtube.com/watch?v=7DcqbBzs-ZQ
| 2018.06.25
| Hydra
| Hardware
| Yoke
| n/a
| n/a
|-
! [[File:VerQRjS3iWE.png|200px]]
| How to install an additional Yoke on a Hyrel Hydra
| https://www.youtube.com/watch?v=VerQRjS3iWE
| 2018.06.23
| Hydra
| Hardware
| Yoke
| n/a
| n/a
|-
! [[File:jSTmzuuMYvc.png|200px]]
| The Filament Dryer
| https://www.youtube.com/watch?v=jSTmzuuMYvc
| 2018.06.20
| All
| Hardware
| Preheating
| Filaments
| n/a
|-
! [[File:lNURH2fRbY0.jpg|200px]]
| Fourth and Fifth Axes Demo on a Hyrel Hydra
| https://www.youtube.com/watch?v=lNURH2fRbY0
| 2018.04.19
| Hydra
| Hardware
| 4th Axis
| 5th Axis
| n/a
|-
! [[File:9R6OUMvb.jpg|200px]]
| Installing a fourth axis on a Hyrel Hydra
| https://www.youtube.com/watch?v=_9R6OUMvb-o
| 2018.04.19
| Hydra
| Hardware
| 4th Axis
| n/a
| n/a
|-
! [[File:2QqwfsKgzuQ.jpg|200px]]
| Machining hotbeds to under 0.001"
| https://youtu.be/2QqwfsKgzuQ
| 2018.04.06
| Hydra
| Hardware
| Hotbed
| n/a
| n/a
|-
! [[File:O1xmXCdj1xE.png|200px]]
|  Setting the Z-Offset on the EHR
| https://youtu.be/O1xmXCdj1xE
| 2018.03.21
| EHR
| Hardware
| Z-Zero
| n/a
| n/a
|-
! [[File:KqnjlTSg-20.jpg|200px]]
| CO2 Laser Marking with the Hydra
| https://youtu.be/kqnjlTSg-20
| 2017.11.07
| Hydra
| Hardware
| Laser
| n/a
| n/a
|-
! [[File:FnYDoNkgOrI.jpg|200px]]
| Converting a Hydra from Printer to Laser
| https://youtu.be/FnYDoNkgOrI
| 2017.11.07
| Hydra
| Hardware
| Laser
| n/a
| n/a
|-
! [[File:FHqTlcdISIg.jpg|200px]]
| Cutting Nylon Mesh with CO2 Laser on a Hydra
| https://youtu.be/fHqTlcdISIg
| 2017.11.07
| Hydra
| Hardware
| Laser
| n/a
| n/a
|-
! [[File:NTejDT1B6uQ.jpg|200px]]
| Chamber Temperature in a Cold Room
| https://youtu.be/nTejDT1B6uQ
| 2017.11.07
| Hydra
| Hardware
| Heater
| n/a
| n/a
|-
! [[File:4Y9V6RWhKj4.jpg|200px]]
| Cutting acrylic with the CO2 Laser
| https://youtu.be/4Y9V6RWhKj4
| 2017.11.07
| Hydra
| Hardware
| Application
| Acrylic
| n/a
|-
! [[File:DkMtzPDtIQY.jpg|200px]]
| Tiny Heated Chilled Bed Preview
| https://youtu.be/dkMtzPDtIQY
| 2017.11.07
| EHR, Hydra
| Hardware
| Application
| Bioloicals
| n/a
|-
! [[File:GdvyT8HoaOw.jpg|200px]]
| Fourth Axis Rotary Print
| https://youtu.be/gdvyT8HoaOw
| 2017.10.20
| Hydra
| Hardware
| Application
| ABS
| n/a
|-
! [[File:3nKqwcXcEgY.png|200px]]
| Additive Manufacturing of Toroid Inductor for Electronics Applications
| https://youtu.be/3nKqwcXcEgY
| 2017.10.02
| 30M
| Hardware
| Application
| Conductive, Magnetic
| Paste
|-
! [[File:Az7V1FSRJfs.jpg|200px]]
| Hyrel Hydra X and Y Belt Tension Adjustments
| https://www.youtube.com/watch?v=Az7V1FSRJfs
| 2017.08.17
| Hydra
| Hardware
| Maintenance
| n/a
| n/a
|-
! [[File:SyMB5063J5E.jpg|200px]]
| Hyrel Hydra Linear Bearing Adjustments
| https://www.youtube.com/watch?v=SyMB5063J5E
| 2017.08.16
| Hydra
| Hardware
| Maintenance
| n/a
| n/a
|-
! [[File:ZEsnegXhpLw.jpg|200px]]
| Hyrel Hydra Z Belt Tension Adjustments
| https://www.youtube.com/watch?v=zEsnegXhpLw
| 2017.08.16
| Hydra
| Hardware
| Maintenance
| n/a
| n/a
|-
! [[File:WNr59eCGuK4.png|200px]]
| Changing the Address Resistor on the CO2 Laser
| https://www.youtube.com/watch?v=WNr59eCGuK4
| 2017.08.07
| Hydra
| hardware
| Update
| n/a
| n/a
|-
! [[File:QBBxkx40H8s.png|200px]]
| CO2 Laser Alignment
| https://www.youtube.com/watch?v=qBBxkx40H8s
| 2017.07.27
| Hydra
| Hardware
| Adjustment
| n/a
| n/a
|-
! [[File:YiizFlScq9Q.png|200px]]
| Hydra Yoke Adjustment
| https://www.youtube.com/watch?v=yiizFlScq9Q
| 2017.07.14
| Hydra
| Hardware
| Adjustment
| n/a
| n/a
|-
! [[File:CbiCnP_YEbA.png|200px]]
| Hydra Yoke Angle Adjustment
| https://www.youtube.com/watch?v=cbiCnP_YEbA
| 2017.07.13
| Model
| Hardware
| Adjustment
| n/a
| n/a
|-
! [[File:XMsXzGPHjng.png|200px]]
| Engnie, High Resolution (EHR) Setup, Part 2
| https://www.youtube.com/watch?v=xMsXzGPHjng
| 2017.07.10
| EHR
| Hardware, Software
| Instruction
| n/a
| n/a
|-
! [[File:NbWgw9KY6Ic.png|200px]]
| Engnie, High Resolution (EHR) Setup, Part 1
| https://www.youtube.com/watch?v=NbWgw9KY6Ic
| 2017.07.
| EHR
| Hardware, Software
| Instruction
| n/a
| n/a
|-
! [[File:UC7acwIkKmQ.png|200px]]
| EHR Scaffold Instructions
| https://www.youtube.com/watch?v=uC7acwIkKmQ
| 2017.06.26
| EHR
| Hardware
| Operation
| Non-Filament
| Scaffold
|-
! [[File:b1x2dvdYkTE.png|200px]]
| EHR Scaffold Intro
| https://www.youtube.com/watch?v=b1x2dvdYkTE
| 2017.06.26
| EHR
| Hardware
| Instruction
| Non-Filament
| Scaffold
|-
! [[File:oisWKujfXAI.png|200px]]
| Unclogging a rare clogged MK1-250
| https://www.youtube.com/watch?v=oisWKujfXAI
| 2017.06.22
| MK1-250, MK2-250
| Hardware
| Maintenance
| Filament
| Clog
|-
! [[File:6FQJuhd2Lxo.png|200px]]
| Unclogging a rare clogged MK1-450
| https://www.youtube.com/watch?v=6FQJuhd2Lxo
| 2017.06.22
| MK1-450
| Hardware
| Maintenance
| Filament
| Clog
|-
! [[File:WrImt7_Pnxo.png|200px]]
| Flashing Firmware on the Modified CO2 Laser Controller
| https://www.youtube.com/watch?v=WrImt7_Pnxo
| 2017.06.21
| CO2 Laser
| Firmware
| Upgrade
| Laser
| n/a
|-
! [[File:1J5bqvcV3Rs.png|200px]]
| The Hyrel Hydra Family
| https://www.youtube.com/watch?v=1J5bqvcV3Rs
| 3017.06.06
| Hydra
| Hardware
| Demonstration
| All
| n/a
|-
! [[File:CF7eRdFuZYQ.png|200px]]
| High Resolution Engine Vacuum Bed
| https://www.youtube.com/watch?v=CF7eRdFuZYQ
| 2017.05.22
| EHR
| Hardware
| Demonstration
| Any
| Vacuum Bed
|-
! [[File:eltjeQ6KerM.png|200px]]
| High Resolution Engine Setup
| https://www.youtube.com/watch?v=eltjeQ6KerM
| 2017.05.09
| EHR
| Hardware
| Instructions
| Any
| n/a
|-
! [[File:SvX4gKqAQDI.png|200px]]
| SDS Clench Valve Assembly Instructions
| https://www.youtube.com/watch?v=SvX4gKqAQDI
| 2017.05.19
| SDS
| Hardware
| Instructions
| Non-Filament
| n/a
|-
! [[File:Mz5J8jsb6D4.png|200px]]
| How to Load the SDS Clench Valve
| https://www.youtube.com/watch?v=Mz5J8jsb6D4
| 2017.05.16
| SDS (all EMO-type)
| Hardware
| Installation
| Non-Filament
| n/a
|-
! [[File:JwKq8_tahYA.png|200px]]
| EHR Accuracy Test
| https://www.youtube.com/watch?v=JwKq8_tahYA
| 2017.05.16
| EHR
| Hardware
| Demonstration
| All
| n/a
|-
! [[File:Udbu_Zuh8k0.png|200px]]
| Hydra 430, 640, 645 Controls Overview
| https://www.youtube.com/watch?v=Udbu_Zuh8k0
| 2017.05.08
| Hydra 430, 640, 645
| Hardware
| Overview
| All
| n/a
|-
! [[File:cClPqIJwhLs.png|200px]]
| Using Low Temperature Solder Paste to connect a Flat Flex Cable
| https://www.youtube.com/watch?v=cClPqIJwhLs
| 2017.04.17
| n/a
| Hardware
| Demonstration
| Solder Paste
| n/a
|-
! [[File:GCzPw4FOG8c.png|200px]]
| Draining Laser Coolant on the Hyrel Hydra
| https://www.youtube.com/watch?v=GCzPw4FOG8c
| 2017.04.13
| Hydra 640, 645
| Hardware
| Maintenance
| Laser
| n/a
|-
! [[File:pPtGSwyS140.png|200px]]
| Hydra Home Calibration Details
| https://www.youtube.com/watch?v=pPtGSwyS140
| 2017.04.07
| Hydra (All)
| Firmware
| Settings
| n/a
| n/a
|-
! [[File:LLIWqTRBhTo.png|200px]]
| Replacing the top component on an STS Head Assembly
| https://www.youtube.com/watch?v=LLIWqTRBhTo
| 2017.04.05
| SDS
| Hardware
| Maintenance
| Non-filament
| n/a
|-
! [[File:qxbtI034omk.png|200px]]
| HYDRA Hot Bed Installation
| https://www.youtube.com/watch?v=qxbtI034omk
| 2017.03.22
| Hydra (All)
| Hardware
| Installation
| All
| n/a
|-
! [[File:fuLCsqfAX3E.png|200px]]
| Hydra Model Startup
| https://www.youtube.com/watch?v=fuLCsqfAX3E
| 2017.03.22
| Hydra (All)
| Hardware
| Startup
| All
| n/a
|-
! [[File:LhnV9H7LV9g.png|200px]]
| Unboxing the Hydra Floor Model Units
| https://www.youtube.com/watch?v=LhnV9H7LV9g
| 2017.03.19
| Hydra (All)
| Hardware
| Startup
| All
| n/a
|-
! [[File:ULpn18OqD-U.png|200px]]
| Hydra Overview by CTO Karl Gifford
| https://www.youtube.com/watch?v=ULpn18OqD-U
| 2017.03.09
| Hydra (All
| Hardware
| Overview
| All
| n/a
|-
! [[File:QEfskyU7LJ4.png|200px]]
| How to Manage the Pick-and-Place with Repetrel Software
| https://www.youtube.com/watch?v=QEfskyU7LJ4
| 2017.03.02
| PNP
| Hardware
| Setup
| PNP
| n/a
|-
! [[File:Jz3onGdmW1c.png|200px]]
| Hyrel Hydra Versitility
| https://www.youtube.com/watch?v=Jz3onGdmW1c
| 2017.02.08
| Hydra (All)
| Hardware
| Introduction
| All
| n/a
|-
! [[File:pKkrd4R_54Y.png|200px]]
| Hydra Vinyl Cutter Overview
| https://www.youtube.com/watch?v=pKkrd4R_54Y
| 2017.02.16
| Hydra (All)
| Hardware
| Demonstration
| Vinyl
| n/a
|-
! [[File:haKWeCbXkMI.png|200px]]
| Hyrel 3D Hydra Pick-and-Place Introduction
| https://www.youtube.com/watch?v=haKWeCbXkMI
| 2017.02.10
| Hydra (All)
| Hardware
| Introduction
| Pick-And-Place
| n/a
|-
! [[File:uACoqtNbXE0.png|200px]]
| The Hyrel3D Hydra Line
| https://www.youtube.com/watch?v=uACoqtNbXE0
| 2017.01.26
| Hydra
| Hardware
| Introduction
| All
| n/a
|-
! [[File:KAoSS-Z-aeY.png|200px]]
| Tramming the bed on the 16A
| https://www.youtube.com/watch?v=KAoSS-Z-aeY
| 2017.01.19
| Hydra (All)
| Hardware
| Maintenance
| n/a
| n/a
|-
! [[File:tibkVZB_n9c.png|200px]]
| The Benefits of Microscope Inspection During Printing
| https://www.youtube.com/watch?v=tibkVZB_n9c
| 2017.01.06
| All
| Hardware
| Instruction
| All
| n/a
|-
! [[File:aR4d-2BZj_Y.png|200px]]
| Printing PLGA for internal Biological Applications
| https://www.youtube.com/watch?v=aR4d-2BZj_Y
| 2017.01.02
| All
| Hardware
| Maintenance
| Emulsion
| n/a
|-
! [[File:Z4IGQ5JMP6g.png|200px]]
| Varialble Width Conductive Paste Extrusion
| https://www.youtube.com/watch?v=z4IGQ5JMP6g
| 2016.12.30
| All
| Hardware
| Introduction
| Emulsion
| n/a
|-
! [[File:2f5FEhVsqy8.png|200px]]
| Microscope Print View Setup
| https://www.youtube.com/watch?v=2f5FEhVsqy8
| 2016.12.30
| All
| Hardware
| Maintenance
| All
| n/a
|-
! [[File:D2sWEYRVAII.png|200px]]
| Replacing the LED Strip
| https://www.youtube.com/watch?v=D2sWEYRVAII
| 2016.12.23
| System 30M
| Hardware
| Maintenance
| LEDs
| n/a
|-
! [[File:14ynZ3DHzVg.png|200px]]
| Replacing the Front Switch Panel
| https://www.youtube.com/watch?v=14ynZ3DHzVg
| 2016.12.23
| System 30M
| Hardware
| Maintenance
| Switch Panel
| n/a
|-
! [[File:DQj6oLfrbLo.png|200px]]
| Static Mixing Head Explained - v2 Including SDS Heads
| https://www.youtube.com/watch?v=DQj6oLfrbLo
| 2016.12.20
| All
| Hardware
| Introduction
| Emulsion
| n/a
|-
! [[File:VJXnB-8JII.png|200px]]
| Hot Bed Manufacturing
| https://www.youtube.com/watch?v=_vJXnB-8JII
| 2016.12.16
| Hydra
| Hardware
| Instruction
| All
| HotBed
|-
! [[File:3azICOBuHdk.png|200px]]
| Static Mixing Head Explained
| https://www.youtube.com/watch?v=3azICOBuHdk
| 2016.12.15
| MODEL
| Hardware
| Instruction
| Emulsion
| Static Mixing
|-
! [[File:6qJ-2uFt-_Y.png|200px]]
| Timelapse Recording
| https://www.youtube.com/watch?v=6qJ-2uFt-_Y
| 2016.12.06
| All
| Software
| Instruction
| n/a
| n/a
|-
! [[File:ROpcvqS r8s.png|200px]]
| HotHead LEDs Explained
| https://www.youtube.com/watch?v=ROpcvqS_r8s
| 2016.12.06
| All
| Hardware
| Instruction
| All
| LEDs
|-
! [[File:Tz6mRSkOaSk.png|200px]]
| LA6-450 and LA5-808 Laser Overview
| https://www.youtube.com/watch?v=Tz6mRSkOaSk
| 2016.12.02
| LA5-808, LA6-450
| Hardware
| Instruction
| Laser
| n/a
|-
! [[File:h95IurET7UM.png|200px]]
| SDS and CSD Overview
| https://www.youtube.com/watch?v=h95IurET7UM
| 2016.11.29
| SDS, CSD
| Hardware
| Instruction
| Emulsion
| n/a
|-
! [[File:4B9hoMLNOuQ.png|200px]]
| Quiet Storm Cooling Fan Overview
| https://www.youtube.com/watch?v=4B9hoMLNOuQ
| 2016.11.28
| QS
| Hardware
| Overview
| Filament
| n/a
|-
! [[File:9_onCKhT_dg.png|200px]]
| VOL-25 and VCD-25 Overview
| https://www.youtube.com/watch?v=9_onCKhT_dg
| 2016.11.28
| VOL-25, VCD-25
| Hardware
| Overview
| Emulsion
| n/a
|-
! [[File:QD2FrZ4kg1g.png|200px]]
| KRA-15 and KCD-15 Overview
| https://www.youtube.com/watch?v=QD2FrZ4kg1g
| 2016.11.28
| KRA-15, KCD-15
| Hardware
| Overview
| Emulsion
| n/a
|-
! [[File:Rc2UFwjUtc4.png|200px]]
| Hydra 640 (16A) Two Part Test Print
| https://www.youtube.com/watch?v=Rc2UFwjUtc4
| 2016.11.23
| Hydra (All)
| Hardware
| Demonstration
| Filament
| n/a
|-
! [[File:Ql1NZLWVJQM.png|200px]]
| Extrusion Prototype Print
| https://www.youtube.com/watch?v=Ql1NZLWVJQM
| 2016.11.23
| Hydra 640
| Hardware
| Demonstration
| Filament
| n/a
|-
! [[File:KtK256u0sN8.png|200px]]
| EMO-25 and COD-25 Overview
| https://www.youtube.com/watch?v=ktK256u0sN8
| 2016.11.17
| EMO-25, COD-25
| Hardware
| Overview
| Emulsion
| n/a
|-
! [[File:Vn8jnvwh5to.png|200px]]
| Session 3C Slicing for Multiple Head Support
| https://www.youtube.com/watch?v=Vn8jnvwh5to
| 2016.11.15
| Any
| Software
| Slicing
| Any
| n/a
|-
! [[File:p1Ihd4ETxhg.png|200px]]
| Session 3A - Setting Two Heads to Z-Zero
| https://www.youtube.com/watch?v=p1Ihd4ETxhg
| 2016.11.14
| All
| Software
| Instruction
| All
| n/a
|-
! [[File:FCuSvQm6ej4.png|200px]]
| Session 3B - Calibrating the Offset Between Two Heads
| https://www.youtube.com/watch?v=FCuSvQm6ej4
| 2016.11.14
| All
| Software
| Instruction
| All
| n/a
|-
! [[File:dkQpsJWRI4Y.png|200px]]
| Session 2D - Editing Slic3r Recipes
| https://www.youtube.com/watch?v=dkQpsJWRI4Y
| 2016.11.109
| All
| Software
| Instruction
| All
| n/a
|-
! [[File:kJc9sNlV0fA.png|200px]]
| Session 2E - Slicing your STL and Viewing your GCODE
| https://www.youtube.com/watch?v=kJc9sNlV0fA
| 2016.11.09
| All
| Software
| Instruction
| All
| n/a
|-
! [[File:IQbgGwiGVZA.png|200px]]
| Session 2C - Positioning, Scaling, and Rotating your STL
| https://www.youtube.com/watch?v=IQbgGwiGVZA
| 2016.
| All
| Software
| Instruction
| All
| n/a
|-
! [[File:mVyCq7CPGLg.png|200px]]
| Session 1A - Hardware and Software Overview
| https://www.youtube.com/watch?v=mVyCq7CPGLg
| 2016.11.03
| All
| Software
| Instruction
| All
| n/a
|-
! [[File:2tIHw_JIQAI.png|200px]]
| Session 1B - Communications and Bed Leveling
| https://www.youtube.com/watch?v=2tIHw_JIQAI
| 2016.11.02
| All
| Software
| Instruction
| All
| n/a
|-
! [[File:lFATCfKJf4I.png|200px]]
| Session 1C - Printing with Plasticine
| https://www.youtube.com/watch?v=lFATCfKJf4I
| 2016.11.02
| All
| Software
| Instruction
| All
| n/a
|-
! [[File:2yHRuef29L4.png|200px]]
| Session 2A: Simple CAD Modeling in FreeCAD
| https://www.youtube.com/watch?v=2yHRuef29L4
| 2016.08.24
| All
| Software
| Instruction
| All
| n/a
|-
! [[File:eLGIRAgLz4w.png|200px]]
| Session 2B - Healing an STL in MeshLab
| https://www.youtube.com/watch?v=eLGIRAgLz4w
| 2016.08.17
| All
| Software
| Instruction
| All
| n/a
|-
! [[File:RlJqdhtpB6Q.png|200px]]
| PC to Printer Connectivity
| https://www.youtube.com/watch?v=RlJqdhtpB6Q
| 2016.11.01
| All
| Software
| Instruction
| All
| n/a
|-
! [[File:C88ni0huwhw.png|200px]]
| Using the Spindle Tool to rework Circuit Boards
| https://www.youtube.com/watch?v=C88ni0huwhw
| 2016.10.27
| All
| Hardware
| Instruction
| Spindle Tool
| n/a
|-
! [[File:KIGeQmXNbNE.png|200px]]
| Running a FADAL CNC on Hyrel3D Circuitry, Firmware and Software
| https://www.youtube.com/watch?v=KIGeQmXNbNE
| 2016.10.17
| All
| All
| Demonstration
| n/a
| n/a
|-
! [[File:ImMo3V1D70w.png|200px]]
| Table Arm (X-Arm) Block Adjustment
| https://www.youtube.com/watch?v=ImMo3V1D70w
| 2016.10.14
| Non-Hydras
| Hardware
| Maintenance
| All
| n/a
|-
! [[File:yaCYFmoIESk.png|200px]]
| MK1-250 Overview
| https://www.youtube.com/watch?v=yaCYFmoIESk
| 2016.10.14
| All
| Hardware
| Instruction
| MK1-250
| n/a
|-
! [[File:UvZMecXsHEM.png|200px]]
| MK1-450 Overview
| https://www.youtube.com/watch?v=UvZMecXsHEM
| 2016.10.14
| All
| Hardware
| Instruction
| MK1-450
| n/a
|-
! [[File:SOGKeU3vLbs.png|200px]]
| MK2-250 Overview
| https://www.youtube.com/watch?v=SOGKeU3vLbs
| 2016.10.14
| All
| Hardware
| Instruction
| MK2-250
| n/a
|-
! [[File:FkJT3ILlAHw.png|200px]]
| Hyrel3D Replacing the Heated Build Platform
| https://www.youtube.com/watch?v=FkJT3ILlAHw
| 2016.10.03
| All
| Hardware
| Instruction
| HotBed
| n/a
|-
! [[File:3KwJ6OgOx14.png|200px]]
| Multi Head Printing - Nested STLs
| https://www.youtube.com/watch?v=3KwJ6OgOx14
| 2016.09.22
| All
| Software
| Instruction
| All
| n/a
|-
! [[File:4GYWfMrs0F8.png|200px]]
| X-Axis Belt Tightening
| https://www.youtube.com/watch?v=4GYWfMrs0F8
| 2016.09.22
| S30, ESR
| Hardware
| Maintenance
| All
| n/a
|-
! [[File:IkgviAGep-c.png|200px]]
| Y-Axis Belt Tightening
| https://www.youtube.com/watch?v=IkgviAGep-c
| 2016.09.21
| S30, ESR
| Hardware
| Maintenance
| All
| n/a
|-
! [[File:lQy25Nlj3_Q.png|200px]]
| Plasma Magnetic Vortex Deposition (ElectroSpinning)
| https://www.youtube.com/watch?v=lQy25Nlj3_Q
| 2016.09.21
| Any
| Hardware
| Demonstration
| EMO-HV
| n/a
|-
! [[File:LQb5vS97jFo.png|200px]]
| 3D Milling on the Hydra Series
| https://www.youtube.com/watch?v=LQb5vS97jFo
| 2016.09.02
| Hydra
| Hardware
| Demonstration
| ST1 Spindle Tool
| n/a
|-
! [[File:81sVBZOOcbw.png|200px]]
| Introducing the Hydra 640 (formerly Model 16A)
| https://www.youtube.com/watch?v=81sVBZOOcbw
| 2016.08.05
| Hydra
| Hardware
| Introduction
| Any
| n/a
|-
! [[File:uPqr4S0WC3Q.png|200px]]
| USBB Jumper Instructions
| https://www.youtube.com/watch?v=uPqr4S0WC3Q
| 2016.07.19
| S30M, ESR, EHR
| Hardware
| Instruction
| Any
| n/a
|-
! [[File:Rw2E_d-q9bQ.png|200px]]
| Size Does Matter
| https://www.youtube.com/watch?v=Rw2E_d-q9bQ
| 2016.07.11
| Hydra Series
| Hardware
| Introduction
| Any
| n/a
|-
! [[File:xGriCCrfkuw.png|200px]]
| Print Heads Overview
| https://www.youtube.com/watch?v=xGriCCrfkuw
| 2016.006.16
| Any
| Hardware
| Overview
| Print Heads
| n/a
|-
! [[File:QMyuKdgiWI4.png|200px]]
| Session 2F - Loading and Printing with Filaments, MK-Series Heads
| https://www.youtube.com/watch?v=QMyuKdgiWI4
| 2016.06.03
| Any
| Hardware
| Instruction
| MK Series
| n/a
|-
! [[File:ysO8oAzFwC4.png|200px]]
| MK1-250 PEEK Nozzle Assembly
| https://www.youtube.com/watch?v=ysO8oAzFwC4
| 2016.05.02
| Any
| Hardware
| Instruction
| MK1-250, MK2-250
| n/a
|-
! [[File:BoHRC9m5nlQ.png|200px]]
| New Hydra Printer Line Intro
| https://www.youtube.com/watch?v=BoHRC9m5nlQ
| 2016.03.28
| Hydra
| Hardware
| Introduction
| Any
| n/a
|-
! [[File:XREWb_Md5o0.png|200px]]
| Bioplotting for under $10K
| https://www.youtube.com/watch?v=XREWb_Md5o0
| 2016.02.17
| Any
| Hardware
| Introduction
| SDS Series
| n/a
|-
! [[File:9zxxBYbdlOE.png|200px]]
| Programming Head Offsets
| https://www.youtube.com/watch?v=9zxxBYbdlOE
| 2016.02.17
| All
| Software
| Instruction
| Any
| n/a
|-
! [[File:nfIvS50zLyc.png|200px]]
| Slicing for a Two-Material Print
| https://www.youtube.com/watch?v=nfIvS50zLyc
| 2016.02.17
| Any
| Software
| Instruction
| Any
| n/a
|-
! [[File:0dS3bC0BnRQ.png|200px]]
| Loading Filament and Printing with the Hyrel3D MK2-250
| https://www.youtube.com/watch?v=0dS3bC0BnRQ
| 2016.02.09
| Any
| Hardware
| Instruction
| MK2-250
| n/a
|-
! [[File:v2ifSlZ0qEw.png|200px]]
| Loading Filament and Printing with the Hyrel3D MK1-250
| https://www.youtube.com/watch?v=v2ifSlZ0qEw
| 2016.02.08
| Any
| Hardware
| Instruction
| MK1-250
| n/a
|-
! [[File:q-DbAbNMW48.png|200px]]
| Loading and Printing with the EMO-25 Print Head
| https://www.youtube.com/watch?v=q-DbAbNMW48
| 2016.02.04
| Any
| Hardware
| Instruction
| EMO-25
| n/a
|-
! [[File:ej55bZXrltA.png|200px]]
| SDS RTV Instructions, v2
| https://www.youtube.com/watch?v=ej55bZXrltA
| 2016.02.04
| Any
| Hardware
| Instruction
| SDS Series
| RTV
|-
! [[File:MwrhV74NjCQ.png|200px]]
| Intro to Hyrel Possibilities - Jan 2016
| https://www.youtube.com/watch?v=MwrhV74NjCQ
| 2016.01.25
| All
| Hardware
| Overview
| All
| n/a
|-
! [[File:V_zCytnGvvo.png|200px]]
| MK2-250 Dual Drive for Flexible Filaments
| https://www.youtube.com/watch?v=V_zCytnGvvo
| 2016.01.20
| Any
| Hardware
| Introduction
| MK2-250
| n/a
|-
! [[File:O1IGa-8y9yQ.png|200px]]
| 6w, 450nm Laser Test
| https://www.youtube.com/watch?v=O1IGa-8y9yQ
| 2016.01.14
| Any
| Hardware
| Demonstration
| LA6-450
| n/a
|-
! [[File:0JJp7HeK35M.png|200px]]
| SDS RTV Instructions, v1
| https://www.youtube.com/watch?v=0JJp7HeK35M
| 2016.01.14
| Any
| Hardware
| Instructions
| SDS Series
| n/a
|-
! [[File:XKHa1CXnSdI.png|200px]]
| Introducing the SDS Print Heads
| https://www.youtube.com/watch?v=XKHa1CXnSdI
| 2016.01.08
| Any
| Hardware
| Introduction
| SDS Series
| n/a
|-
! [[File:BlSGlOpyipI.png|200px]]
| Sneak Peek: Pick and Place Prototype
| https://www.youtube.com/watch?v=BlSGlOpyipI
| 2016.01.05
| Hydra
| Hardware
| Introduction
| PNP Pick and Place
| n/a
|-
! [[File:OceUiuTixPA.png|200px]]
| LA6-450: 6w, 450nm Diode Laser Head
| https://www.youtube.com/watch?v=OceUiuTixPA
| 2015.12.22
| Any
| Hardware
| Introduction
| LA6-450
| n/a
|-
! [[File:vmw0LS_f9V0E.png|200px]]
| 3D Printing RTV Silicone
| https://www.youtube.com/watch?v=vmw0LS_f9V0
| 2015.12.18
| Any
| Hardware
| Demonstration
| SDS-Series
| n/a
|-
! [[File:YWe3TQGgNW0.png|200px]]
| Loading the VCD-25
| https://www.youtube.com/watch?v=YWe3TQGgNW0
| 2015.12.09
| Any
| Hardware
| Instruction
| VCD-25
| n/a
|-
! [[File:huJuexTLbYA.png|200px]]
| Short Porcelain Print Demo
| https://www.youtube.com/watch?v=huJuexTLbYA
| 2015.12.08
| Any
| Hardware
| Demonstration
| EMO-25
| n/a
|-
! [[File:b583I7AlGJI.png|200px]]
| Replacing the Tablet Interface Board
| https://www.youtube.com/watch?v=b583I7AlGJI
| 2015.11.25
| System 30M, EHR
| Hardware
| Instruction
| n/a
| n/a
|-
! [[File:ZKAzXoJ0q8Y.png|200px]]
| 2016 Design Contest Video
| https://www.youtube.com/watch?v=ZKAzXoJ0q8Y
| 2015.11.17
| System 30M
| Hardware
| Contest
| All
| n/a
|-
! [[File:YRsyEGHyt3k.png|200px]]
| DXF to Laser Gcode Generation
| https://www.youtube.com/watch?v=YRsyEGHyt3k
| 2015.10.20
| Any
| Software
| Instruction
| Laser, Spindle Tool
| n/a
|-
! [[File:Om9cjxMXuxY.png|200px]]
| Printing PEEK (PolyEther Ether Ketone) and PC (PolyCarbonate)
| https://www.youtube.com/watch?v=Om9cjxMXuxY
| 2015.09.29
| Any
| Hardware
| Demonstration
| MK1-450
| n/a
|-
! [[File:IreaoCfQ8mE.png|200px]]
| Healing with MeshLab
| https://www.youtube.com/watch?v=IreaoCfQ8mE
| 2015.09.01
| Any
| Software
| Instruction
| Any
| n/a
|-
! [[File:0Aj9WCabPgw.png|200px]]
| Postprocessing with a Heat Gun
| https://www.youtube.com/watch?v=0Aj9WCabPgw
| 2015.08.17
| Any
| Hardware
| Instruction
| Any
| n/a
|-
! [[File:4oxCqR_DVNQ.png|200px]]
| Introduction to Hyrel 3D Possibilities, 2015
| https://www.youtube.com/watch?v=4oxCqR_DVNQ
| 2015.08.11
| All
| Hardware
| Introduction
| All
| n/a
|-
! [[File:n4QwiuQtjO0.png|200px]]
| Updating to Repetrel 2 4xx
| https://www.youtube.com/watch?v=n4QwiuQtjO0
| 2015.08.06
| All
| Software
| Instruction
| n/a
| n/a
|-
! [[File:cFAFRkpLmww.png|200px]]
| Updating your 407 Motion Controller
| https://www.youtube.com/watch?v=cFAFRkpLmww
| 2015.07.24
| All
| Software
| Instruction
| n/a
| n/a
|-
! [[File:XKCEkKSolZc.png|200px]]
| Replacing the HOTHEAD controller
| https://www.youtube.com/watch?v=XKCEkKSolZc
| 2015.07.23
| All
| Hardware
| Instruction
| n/a
| n/a
|-
! [[File:YM8QMZBTb4o.png|200px]]
| Programming the HOTBED controller on the System 30M and ESR
| https://www.youtube.com/watch?v=yM8QMZBTb4o
| 2015.07.22
| All
| Software
| Instruction
| n/a
| n/a
|-
! [[File:CuRcIE-Jbyc.jpg|200px]]
| Printing with Cloning - three heads in Parallel
| https://www.youtube.com/watch?v=cuRcIE-Jbyc
| 2015.07.21
| All
| Software
| Instruction
| n/a
| n/a
|-
! [[File:VMyS3h4qiSA.jpg|200px]]
| Older Instructions, Slicing for Multiple Head Support
| https://www.youtube.com/watch?v=VMyS3h4qiSA
| 2015.07.17
| All
| Software
| Slicing
| Any
| n/a
|-
! [[File:0gFX6Mh-ths.png|200px]]
| Leveling the X-Arm on System 30M, Engine SR
| https://www.youtube.com/watch?v=0gFX6Mh-ths
| 2015.06.02
| System 30M, Engine SR
| Hardware
| Instruction
| n/a
| n/a
|-
! [[File:LZd0ecogGlQ.png|200px]]
| Correcting Y-Arm Flexation Fix on the System 30M, Engine SR
| https://www.youtube.com/watch?v=LZd0ecogGlQ
| 2015.03.18
| System 30M, Engine SR
| Hardware
| Instruction
| n/a
| n/a
|-
! [[File:ArDX4UpflmE.png|200px]]
| Manually Setting the Z-Zero Position
| https://www.youtube.com/watch?v=ArDX4UpflmE
| 2015.03.09
| System 30M, Engine SR
| Hardware
| Instruction
| n/a
| n/a
|-
! [[File:vc9gBZtUL7c.png|200px]]
| Picking Right 3D Printer For You
| https://www.youtube.com/watch?v=vc9gBZtUL7c
| 2015.02.08
| All
| Hardware
| Overview
| All
| n/a
|-
! [[File:66S9XJ-KeU8.png|200px]]
| Changing the Main I/O Board, System 30M, EHR, ESR
| https://www.youtube.com/watch?v=66S9XJ-KeU8
| 2015.02.12
| All
| Hardware
| Overview
| All
| n/a
|-
! [[File:YEePz8_0ttc.png|200px]]
| Laser Test Print
| https://www.youtube.com/watch?v=yEePz8_0ttc
| 2015.02.17
| All
| Hardware
| Demonstration
| LA5-808 Diode Laser
| n/a
|-
! [[File:tLHpaePTP-k.png|200px]]
| EMO Series Printing Tips
| https://www.youtube.com/watch?v=tLHpaePTP-k
| 2015.02.10
| All
| Hardware
| Instruction
| EMO Series (EMO, COD, VOL, VCD, KRA, KCD, KR2, KC2)
| n/a
|-
! [[File:Zl1sqy6PWx8.jpg|200px]]
| Changing Power Supplies in the 30M and ESR
| https://www.youtube.com/watch?v=Zl1sqy6PWx8
| 2015.02.04
| 30M, ESR
| Hardware
| Instruction
| Any
| n/a
|-
! [[File:IQscrgv6uaQ.png|200px]]
| Multi-Head Calibration Guide
| https://www.youtube.com/watch?v=IQscrgv6uaQ
| 2015.02.03
| Any
| Hardware/Software
| Instruction
| Any
| n/a
|-
! [[File:0lpa4nENtyQ.png|200px]]
| LA5-808 "Shark V" Diode Laser
| https://www.youtube.com/watch?v=0lpa4nENtyQ
| 2015.01.14
| Any
| Hardware
| Introduction
| LA5-808
| n/a
|-
! [[File:mPYPWjnDGho.png|200px]]
| Luer Tip Kit for EMO and SDS Series Print Heads
| https://www.youtube.com/watch?v=mPYPWjnDGho
| 2014.12.23
| Any
| Hardware
| Introduction
| LTK
| n/a
|-
! [[File:-VHxf182fIs.png|200px]]
| Print Head SDK
| https://www.youtube.com/watch?v=-VHxf182fIs
| 2014.12.09
| All
| Hardware, Software
| Introduction
| SDK
| n/a
|-
! [[File:Fg9omXlYR-Q.png|200px]]
| MK Series Printing Tips
| https://www.youtube.com/watch?v=Fg9omXlYR-Q
| 2014.11.12
| All
| Procedure
| Instruction
| MK Series
| n/a
|-
! [[File:EosKDe-SyUI.png|200px]]
| Replacing fuses (old) on the Yoke
| https://www.youtube.com/watch?v=EosKDe-SyUI
| 2014.08.27
| ALL
| Hardware
| Instruction
| All
| n/a
|-
! [[File:4yuzpUqeE-Y.png|200px]]
| Loading the EMO-type Reservoirs
| https://www.youtube.com/watch?v=4yuzpUqeE-Y
| 2014.04.23
| ALL
| Hardware
| Instruction
| EMO, COD, VOL, VCD, KRA, KCD, KR2, KC2
| n/a
|-
! [[File:xQFacnpzmv0.png|200px]]
| Changing the Economics of 3D Printing
| https://www.youtube.com/watch?v=xQFacnpzmv0
| 2013.12.24
| All
| Hardware
| Demonstration
| n/a
| n/a
|-
! [[File:c9HvQ3SepoM.png|200px]]
| System 30 Product Release
| https://www.youtube.com/watch?v=c9HvQ3SepoM
| 2013.10.29
| System 30
| Hardware, Software
| Introduction
| n/a
| n/a
|-
! [[File:P6aMBQSZPgg.png|200px]]
| Simultaneous 3D Printing of Multiple Parts
| https://www.youtube.com/watch?v=P6aMBQSZPgg
| 2013.07.02
| All
| Hardware, Software
| Demonstration
| MK1-250
| n/a
|-
! [[File:nuii5rP53Js.png|200px]]
| 3D Printing with Sugru The Amazing Self-Setting Rubber
| https://www.youtube.com/watch?v=nuii5rP53Js
| 2013.06.19
| Any
| Hardware
| Demonstration
| EMO-25
| n/a
|-
! [[File:dihvAQR7LQg.png|200px]]
| 3D Printing with Play-Doh
| https://www.youtube.com/watch?v=dihvAQR7LQg
| 2013.06.04
| All
| Hardware
| Demonstration
| EMO-25
| n/a
|-
! [[File:cw8XiW46G0k.png|200px]]
| 3D Printing with Plasticine
| https://www.youtube.com/watch?v=cw8XiW46G0k
| 2013.04.13
| Any
| Hardware
| Demonstration
| EMO-25
| n/a
|-
! [[File:trdz4YDbdsw.png|200px]]
| 3D Printing with Air-Dry Modeling Clay
| https://www.youtube.com/watch?v=trdz4YDbdsw
| 2013.04.06
| Any
| Hardware
| Demonstration
| EMO-25
| n/a
|-
! [[File:XNwv7Dw_Zwg.png|200px]]
| Interchangeable Hot-Swappable Heads
| https://www.youtube.com/watch?v=XNwv7Dw_Zwg
| 2013.05.12
| Any
| Hardware, Software
| Demonstration
| MK1-250
| n/a
|-
! [[File:mu9xMmkZFns.png|200px]]
| Thank you, Kickstarters!
| https://www.youtube.com/watch?v=mu9xMmkZFns
| 2012.11.05
| All
| Hardware, Software
| Thank You
| n/a
| n/a
|-
! [[File:Z9rgkw5r4l4.png|200px]]
| Quick Tour of our Main Shop!
| https://www.youtube.com/watch?v=Z9rgkw5r4l4
| 2012.10.17
| All
| Introduction
| Thank You
| n/a
| n/a
|}
=== 2012-2015 ===
{| border="1" class="wikitable sortable" style="text-align: center"
|+ Table of Video Links, 2012-2015
! style="width: 10%"|Thumbnail
! style="width: 10%"|Title
! style="width: 10%"|Link
! style="width: 10%"|Date
! style="width: 10%"|Model
! style="width: 10%"|Category
! style="width: 10%"|Activity
! style="width: 10%"|Material Type
! style="width: 10%"|Other
|-
|-
! [[File:OceUiuTixPA.png|200px]]
! [[File:OceUiuTixPA.png|200px]]

Revision as of 17:53, 28 May 2019

Table of Videos

Please also see the Instructions page and the Help page.

Remember, you can CTRL+F to search for a keyword on this page! You can also click on a column header to sort by that column.

The following chart compares and contrasts the various heads:

http://hyrel3d.net/wiki/index.php/Main_Page#Comparison

2018-2019

Table of Video Links, 2018-2019
Thumbnail Title Link Date Model Category Activity Material Type Other
B0lvN-aPYHI.png Five Axis Machining on a Hyrel Hydra https://www.youtube.com/watch?v=B0lvN-aPYHI 2019.05.24 Hydra Hardware Machining Rotating Extra Axes
CmBaHHAfbEo.png Dispensing RTV Silicone on a Hyrel Hydra https://www.youtube.com/watch?v=CmBaHHAfbEo 2019.05.21 Hydra Hardware RTV Silicone SDS-30 Silicone
G526vFi8yWI.png Machining PTFE (Teflon) on a Hyrel Hydra https://www.youtube.com/watch?v=G526vFi8yWI 2019.05.08 Hydra Hardware Machining Spindle Tool PTFE
LfmssRdZwuE.jpg Rotating Head Prototype https://www.youtube.com/watch?v=LfmssRdZwuE 2019.05.08 Hydra Hardware Filament Rotating n/a
CbxB96oZFGE.jpg Installing the new Power Supply in a Hyrel Hydra https://www.youtube.com/watch?v=CbxB96oZFGE 2018.08.13 Hydra Hardware 4th Axis 5th Axis n/a
KrwOviaCZuw.jpg Hyrel Tapping Enabled https://www.youtube.com/watch?v=krwOviaCZuw 2018.08.07 Hydra Hardware Spindle Tool Tapping n/a
QuIM9XSYMxE.jpg Light Duty Milling with 3-Phase Spindle on a Hyrel Hydra https://www.youtube.com/watch?v=QuIM9XSYMxE 2018.08.02 Hydra Hardware Spindle Tool Milling n/a
Ni56OFo1VvM.jpg Improved UV Light Source for more Powerful Crosslinking https://www.youtube.com/watch?v=ni56OFo1VvM 2018.07.20 Any Hardware EMO, SDS n/a n/a
68oktmbp8r0.png How to install 4th and 5th Axes on a Hyrel Hydra https://www.youtube.com/watch?v=68oktmbp8r0 2018.06.26 Hydra Hardware 4th Axis 5th Axis n/a
7DcqbBzs-ZQ.png How to use an additional Yoke on a Hyrel Hydra https://www.youtube.com/watch?v=7DcqbBzs-ZQ 2018.06.25 Hydra Hardware Yoke n/a n/a
VerQRjS3iWE.png How to install an additional Yoke on a Hyrel Hydra https://www.youtube.com/watch?v=VerQRjS3iWE 2018.06.23 Hydra Hardware Yoke n/a n/a
JSTmzuuMYvc.png The Filament Dryer https://www.youtube.com/watch?v=jSTmzuuMYvc 2018.06.20 All Hardware Preheating Filaments n/a
LNURH2fRbY0.jpg Fourth and Fifth Axes Demo on a Hyrel Hydra https://www.youtube.com/watch?v=lNURH2fRbY0 2018.04.19 Hydra Hardware 4th Axis 5th Axis n/a
9R6OUMvb.jpg Installing a fourth axis on a Hyrel Hydra https://www.youtube.com/watch?v=_9R6OUMvb-o 2018.04.19 Hydra Hardware 4th Axis n/a n/a
2QqwfsKgzuQ.jpg Machining hotbeds to under 0.001" https://youtu.be/2QqwfsKgzuQ 2018.04.06 Hydra Hardware Hotbed n/a n/a
O1xmXCdj1xE.png Setting the Z-Offset on the EHR https://youtu.be/O1xmXCdj1xE 2018.03.21 EHR Hardware Z-Zero n/a n/a
KqnjlTSg-20.jpg CO2 Laser Marking with the Hydra https://youtu.be/kqnjlTSg-20 2017.11.07 Hydra Hardware Laser n/a n/a
FnYDoNkgOrI.jpg Converting a Hydra from Printer to Laser https://youtu.be/FnYDoNkgOrI 2017.11.07 Hydra Hardware Laser n/a n/a
FHqTlcdISIg.jpg Cutting Nylon Mesh with CO2 Laser on a Hydra https://youtu.be/fHqTlcdISIg 2017.11.07 Hydra Hardware Laser n/a n/a
NTejDT1B6uQ.jpg Chamber Temperature in a Cold Room https://youtu.be/nTejDT1B6uQ 2017.11.07 Hydra Hardware Heater n/a n/a
4Y9V6RWhKj4.jpg Cutting acrylic with the CO2 Laser https://youtu.be/4Y9V6RWhKj4 2017.11.07 Hydra Hardware Application Acrylic n/a
DkMtzPDtIQY.jpg Tiny Heated Chilled Bed Preview https://youtu.be/dkMtzPDtIQY 2017.11.07 EHR, Hydra Hardware Application Bioloicals n/a
GdvyT8HoaOw.jpg Fourth Axis Rotary Print https://youtu.be/gdvyT8HoaOw 2017.10.20 Hydra Hardware Application ABS n/a
3nKqwcXcEgY.png Additive Manufacturing of Toroid Inductor for Electronics Applications https://youtu.be/3nKqwcXcEgY 2017.10.02 30M Hardware Application Conductive, Magnetic Paste
Az7V1FSRJfs.jpg Hyrel Hydra X and Y Belt Tension Adjustments https://www.youtube.com/watch?v=Az7V1FSRJfs 2017.08.17 Hydra Hardware Maintenance n/a n/a
SyMB5063J5E.jpg Hyrel Hydra Linear Bearing Adjustments https://www.youtube.com/watch?v=SyMB5063J5E 2017.08.16 Hydra Hardware Maintenance n/a n/a
ZEsnegXhpLw.jpg Hyrel Hydra Z Belt Tension Adjustments https://www.youtube.com/watch?v=zEsnegXhpLw 2017.08.16 Hydra Hardware Maintenance n/a n/a
WNr59eCGuK4.png Changing the Address Resistor on the CO2 Laser https://www.youtube.com/watch?v=WNr59eCGuK4 2017.08.07 Hydra hardware Update n/a n/a
QBBxkx40H8s.png CO2 Laser Alignment https://www.youtube.com/watch?v=qBBxkx40H8s 2017.07.27 Hydra Hardware Adjustment n/a n/a
YiizFlScq9Q.png Hydra Yoke Adjustment https://www.youtube.com/watch?v=yiizFlScq9Q 2017.07.14 Hydra Hardware Adjustment n/a n/a
CbiCnP YEbA.png Hydra Yoke Angle Adjustment https://www.youtube.com/watch?v=cbiCnP_YEbA 2017.07.13 Model Hardware Adjustment n/a n/a
XMsXzGPHjng.png Engnie, High Resolution (EHR) Setup, Part 2 https://www.youtube.com/watch?v=xMsXzGPHjng 2017.07.10 EHR Hardware, Software Instruction n/a n/a
NbWgw9KY6Ic.png Engnie, High Resolution (EHR) Setup, Part 1 https://www.youtube.com/watch?v=NbWgw9KY6Ic 2017.07. EHR Hardware, Software Instruction n/a n/a
UC7acwIkKmQ.png EHR Scaffold Instructions https://www.youtube.com/watch?v=uC7acwIkKmQ 2017.06.26 EHR Hardware Operation Non-Filament Scaffold
B1x2dvdYkTE.png EHR Scaffold Intro https://www.youtube.com/watch?v=b1x2dvdYkTE 2017.06.26 EHR Hardware Instruction Non-Filament Scaffold
OisWKujfXAI.png Unclogging a rare clogged MK1-250 https://www.youtube.com/watch?v=oisWKujfXAI 2017.06.22 MK1-250, MK2-250 Hardware Maintenance Filament Clog
6FQJuhd2Lxo.png Unclogging a rare clogged MK1-450 https://www.youtube.com/watch?v=6FQJuhd2Lxo 2017.06.22 MK1-450 Hardware Maintenance Filament Clog
WrImt7 Pnxo.png Flashing Firmware on the Modified CO2 Laser Controller https://www.youtube.com/watch?v=WrImt7_Pnxo 2017.06.21 CO2 Laser Firmware Upgrade Laser n/a
1J5bqvcV3Rs.png The Hyrel Hydra Family https://www.youtube.com/watch?v=1J5bqvcV3Rs 3017.06.06 Hydra Hardware Demonstration All n/a
CF7eRdFuZYQ.png High Resolution Engine Vacuum Bed https://www.youtube.com/watch?v=CF7eRdFuZYQ 2017.05.22 EHR Hardware Demonstration Any Vacuum Bed
EltjeQ6KerM.png High Resolution Engine Setup https://www.youtube.com/watch?v=eltjeQ6KerM 2017.05.09 EHR Hardware Instructions Any n/a
SvX4gKqAQDI.png SDS Clench Valve Assembly Instructions https://www.youtube.com/watch?v=SvX4gKqAQDI 2017.05.19 SDS Hardware Instructions Non-Filament n/a
Mz5J8jsb6D4.png How to Load the SDS Clench Valve https://www.youtube.com/watch?v=Mz5J8jsb6D4 2017.05.16 SDS (all EMO-type) Hardware Installation Non-Filament n/a
JwKq8 tahYA.png EHR Accuracy Test https://www.youtube.com/watch?v=JwKq8_tahYA 2017.05.16 EHR Hardware Demonstration All n/a
Udbu Zuh8k0.png Hydra 430, 640, 645 Controls Overview https://www.youtube.com/watch?v=Udbu_Zuh8k0 2017.05.08 Hydra 430, 640, 645 Hardware Overview All n/a
CClPqIJwhLs.png Using Low Temperature Solder Paste to connect a Flat Flex Cable https://www.youtube.com/watch?v=cClPqIJwhLs 2017.04.17 n/a Hardware Demonstration Solder Paste n/a
GCzPw4FOG8c.png Draining Laser Coolant on the Hyrel Hydra https://www.youtube.com/watch?v=GCzPw4FOG8c 2017.04.13 Hydra 640, 645 Hardware Maintenance Laser n/a
PPtGSwyS140.png Hydra Home Calibration Details https://www.youtube.com/watch?v=pPtGSwyS140 2017.04.07 Hydra (All) Firmware Settings n/a n/a
LLIWqTRBhTo.png Replacing the top component on an STS Head Assembly https://www.youtube.com/watch?v=LLIWqTRBhTo 2017.04.05 SDS Hardware Maintenance Non-filament n/a
QxbtI034omk.png HYDRA Hot Bed Installation https://www.youtube.com/watch?v=qxbtI034omk 2017.03.22 Hydra (All) Hardware Installation All n/a
FuLCsqfAX3E.png Hydra Model Startup https://www.youtube.com/watch?v=fuLCsqfAX3E 2017.03.22 Hydra (All) Hardware Startup All n/a
LhnV9H7LV9g.png Unboxing the Hydra Floor Model Units https://www.youtube.com/watch?v=LhnV9H7LV9g 2017.03.19 Hydra (All) Hardware Startup All n/a
ULpn18OqD-U.png Hydra Overview by CTO Karl Gifford https://www.youtube.com/watch?v=ULpn18OqD-U 2017.03.09 Hydra (All Hardware Overview All n/a
QEfskyU7LJ4.png How to Manage the Pick-and-Place with Repetrel Software https://www.youtube.com/watch?v=QEfskyU7LJ4 2017.03.02 PNP Hardware Setup PNP n/a
Jz3onGdmW1c.png Hyrel Hydra Versitility https://www.youtube.com/watch?v=Jz3onGdmW1c 2017.02.08 Hydra (All) Hardware Introduction All n/a
PKkrd4R 54Y.png Hydra Vinyl Cutter Overview https://www.youtube.com/watch?v=pKkrd4R_54Y 2017.02.16 Hydra (All) Hardware Demonstration Vinyl n/a
HaKWeCbXkMI.png Hyrel 3D Hydra Pick-and-Place Introduction https://www.youtube.com/watch?v=haKWeCbXkMI 2017.02.10 Hydra (All) Hardware Introduction Pick-And-Place n/a
UACoqtNbXE0.png The Hyrel3D Hydra Line https://www.youtube.com/watch?v=uACoqtNbXE0 2017.01.26 Hydra Hardware Introduction All n/a
KAoSS-Z-aeY.png Tramming the bed on the 16A https://www.youtube.com/watch?v=KAoSS-Z-aeY 2017.01.19 Hydra (All) Hardware Maintenance n/a n/a
TibkVZB n9c.png The Benefits of Microscope Inspection During Printing https://www.youtube.com/watch?v=tibkVZB_n9c 2017.01.06 All Hardware Instruction All n/a
AR4d-2BZj Y.png Printing PLGA for internal Biological Applications https://www.youtube.com/watch?v=aR4d-2BZj_Y 2017.01.02 All Hardware Maintenance Emulsion n/a
Z4IGQ5JMP6g.png Varialble Width Conductive Paste Extrusion https://www.youtube.com/watch?v=z4IGQ5JMP6g 2016.12.30 All Hardware Introduction Emulsion n/a
2f5FEhVsqy8.png Microscope Print View Setup https://www.youtube.com/watch?v=2f5FEhVsqy8 2016.12.30 All Hardware Maintenance All n/a
D2sWEYRVAII.png Replacing the LED Strip https://www.youtube.com/watch?v=D2sWEYRVAII 2016.12.23 System 30M Hardware Maintenance LEDs n/a
14ynZ3DHzVg.png Replacing the Front Switch Panel https://www.youtube.com/watch?v=14ynZ3DHzVg 2016.12.23 System 30M Hardware Maintenance Switch Panel n/a
DQj6oLfrbLo.png Static Mixing Head Explained - v2 Including SDS Heads https://www.youtube.com/watch?v=DQj6oLfrbLo 2016.12.20 All Hardware Introduction Emulsion n/a
VJXnB-8JII.png Hot Bed Manufacturing https://www.youtube.com/watch?v=_vJXnB-8JII 2016.12.16 Hydra Hardware Instruction All HotBed
3azICOBuHdk.png Static Mixing Head Explained https://www.youtube.com/watch?v=3azICOBuHdk 2016.12.15 MODEL Hardware Instruction Emulsion Static Mixing
6qJ-2uFt- Y.png Timelapse Recording https://www.youtube.com/watch?v=6qJ-2uFt-_Y 2016.12.06 All Software Instruction n/a n/a
ROpcvqS r8s.png HotHead LEDs Explained https://www.youtube.com/watch?v=ROpcvqS_r8s 2016.12.06 All Hardware Instruction All LEDs
Tz6mRSkOaSk.png LA6-450 and LA5-808 Laser Overview https://www.youtube.com/watch?v=Tz6mRSkOaSk 2016.12.02 LA5-808, LA6-450 Hardware Instruction Laser n/a
H95IurET7UM.png SDS and CSD Overview https://www.youtube.com/watch?v=h95IurET7UM 2016.11.29 SDS, CSD Hardware Instruction Emulsion n/a
4B9hoMLNOuQ.png Quiet Storm Cooling Fan Overview https://www.youtube.com/watch?v=4B9hoMLNOuQ 2016.11.28 QS Hardware Overview Filament n/a
9 onCKhT dg.png VOL-25 and VCD-25 Overview https://www.youtube.com/watch?v=9_onCKhT_dg 2016.11.28 VOL-25, VCD-25 Hardware Overview Emulsion n/a
QD2FrZ4kg1g.png KRA-15 and KCD-15 Overview https://www.youtube.com/watch?v=QD2FrZ4kg1g 2016.11.28 KRA-15, KCD-15 Hardware Overview Emulsion n/a
Rc2UFwjUtc4.png Hydra 640 (16A) Two Part Test Print https://www.youtube.com/watch?v=Rc2UFwjUtc4 2016.11.23 Hydra (All) Hardware Demonstration Filament n/a
Ql1NZLWVJQM.png Extrusion Prototype Print https://www.youtube.com/watch?v=Ql1NZLWVJQM 2016.11.23 Hydra 640 Hardware Demonstration Filament n/a
KtK256u0sN8.png EMO-25 and COD-25 Overview https://www.youtube.com/watch?v=ktK256u0sN8 2016.11.17 EMO-25, COD-25 Hardware Overview Emulsion n/a
Vn8jnvwh5to.png Session 3C Slicing for Multiple Head Support https://www.youtube.com/watch?v=Vn8jnvwh5to 2016.11.15 Any Software Slicing Any n/a
P1Ihd4ETxhg.png Session 3A - Setting Two Heads to Z-Zero https://www.youtube.com/watch?v=p1Ihd4ETxhg 2016.11.14 All Software Instruction All n/a
FCuSvQm6ej4.png Session 3B - Calibrating the Offset Between Two Heads https://www.youtube.com/watch?v=FCuSvQm6ej4 2016.11.14 All Software Instruction All n/a
DkQpsJWRI4Y.png Session 2D - Editing Slic3r Recipes https://www.youtube.com/watch?v=dkQpsJWRI4Y 2016.11.109 All Software Instruction All n/a
KJc9sNlV0fA.png Session 2E - Slicing your STL and Viewing your GCODE https://www.youtube.com/watch?v=kJc9sNlV0fA 2016.11.09 All Software Instruction All n/a
IQbgGwiGVZA.png Session 2C - Positioning, Scaling, and Rotating your STL https://www.youtube.com/watch?v=IQbgGwiGVZA 2016. All Software Instruction All n/a
MVyCq7CPGLg.png Session 1A - Hardware and Software Overview https://www.youtube.com/watch?v=mVyCq7CPGLg 2016.11.03 All Software Instruction All n/a
2tIHw JIQAI.png Session 1B - Communications and Bed Leveling https://www.youtube.com/watch?v=2tIHw_JIQAI 2016.11.02 All Software Instruction All n/a
LFATCfKJf4I.png Session 1C - Printing with Plasticine https://www.youtube.com/watch?v=lFATCfKJf4I 2016.11.02 All Software Instruction All n/a
2yHRuef29L4.png Session 2A: Simple CAD Modeling in FreeCAD https://www.youtube.com/watch?v=2yHRuef29L4 2016.08.24 All Software Instruction All n/a
ELGIRAgLz4w.png Session 2B - Healing an STL in MeshLab https://www.youtube.com/watch?v=eLGIRAgLz4w 2016.08.17 All Software Instruction All n/a
RlJqdhtpB6Q.png PC to Printer Connectivity https://www.youtube.com/watch?v=RlJqdhtpB6Q 2016.11.01 All Software Instruction All n/a
C88ni0huwhw.png Using the Spindle Tool to rework Circuit Boards https://www.youtube.com/watch?v=C88ni0huwhw 2016.10.27 All Hardware Instruction Spindle Tool n/a
KIGeQmXNbNE.png Running a FADAL CNC on Hyrel3D Circuitry, Firmware and Software https://www.youtube.com/watch?v=KIGeQmXNbNE 2016.10.17 All All Demonstration n/a n/a
ImMo3V1D70w.png Table Arm (X-Arm) Block Adjustment https://www.youtube.com/watch?v=ImMo3V1D70w 2016.10.14 Non-Hydras Hardware Maintenance All n/a
YaCYFmoIESk.png MK1-250 Overview https://www.youtube.com/watch?v=yaCYFmoIESk 2016.10.14 All Hardware Instruction MK1-250 n/a
UvZMecXsHEM.png MK1-450 Overview https://www.youtube.com/watch?v=UvZMecXsHEM 2016.10.14 All Hardware Instruction MK1-450 n/a
SOGKeU3vLbs.png MK2-250 Overview https://www.youtube.com/watch?v=SOGKeU3vLbs 2016.10.14 All Hardware Instruction MK2-250 n/a
FkJT3ILlAHw.png Hyrel3D Replacing the Heated Build Platform https://www.youtube.com/watch?v=FkJT3ILlAHw 2016.10.03 All Hardware Instruction HotBed n/a
3KwJ6OgOx14.png Multi Head Printing - Nested STLs https://www.youtube.com/watch?v=3KwJ6OgOx14 2016.09.22 All Software Instruction All n/a
4GYWfMrs0F8.png X-Axis Belt Tightening https://www.youtube.com/watch?v=4GYWfMrs0F8 2016.09.22 S30, ESR Hardware Maintenance All n/a
IkgviAGep-c.png Y-Axis Belt Tightening https://www.youtube.com/watch?v=IkgviAGep-c 2016.09.21 S30, ESR Hardware Maintenance All n/a
LQy25Nlj3 Q.png Plasma Magnetic Vortex Deposition (ElectroSpinning) https://www.youtube.com/watch?v=lQy25Nlj3_Q 2016.09.21 Any Hardware Demonstration EMO-HV n/a
LQb5vS97jFo.png 3D Milling on the Hydra Series https://www.youtube.com/watch?v=LQb5vS97jFo 2016.09.02 Hydra Hardware Demonstration ST1 Spindle Tool n/a
81sVBZOOcbw.png Introducing the Hydra 640 (formerly Model 16A) https://www.youtube.com/watch?v=81sVBZOOcbw 2016.08.05 Hydra Hardware Introduction Any n/a
UPqr4S0WC3Q.png USBB Jumper Instructions https://www.youtube.com/watch?v=uPqr4S0WC3Q 2016.07.19 S30M, ESR, EHR Hardware Instruction Any n/a
Rw2E d-q9bQ.png Size Does Matter https://www.youtube.com/watch?v=Rw2E_d-q9bQ 2016.07.11 Hydra Series Hardware Introduction Any n/a
XGriCCrfkuw.png Print Heads Overview https://www.youtube.com/watch?v=xGriCCrfkuw 2016.006.16 Any Hardware Overview Print Heads n/a
QMyuKdgiWI4.png Session 2F - Loading and Printing with Filaments, MK-Series Heads https://www.youtube.com/watch?v=QMyuKdgiWI4 2016.06.03 Any Hardware Instruction MK Series n/a
YsO8oAzFwC4.png MK1-250 PEEK Nozzle Assembly https://www.youtube.com/watch?v=ysO8oAzFwC4 2016.05.02 Any Hardware Instruction MK1-250, MK2-250 n/a
BoHRC9m5nlQ.png New Hydra Printer Line Intro https://www.youtube.com/watch?v=BoHRC9m5nlQ 2016.03.28 Hydra Hardware Introduction Any n/a
XREWb Md5o0.png Bioplotting for under $10K https://www.youtube.com/watch?v=XREWb_Md5o0 2016.02.17 Any Hardware Introduction SDS Series n/a
9zxxBYbdlOE.png Programming Head Offsets https://www.youtube.com/watch?v=9zxxBYbdlOE 2016.02.17 All Software Instruction Any n/a
NfIvS50zLyc.png Slicing for a Two-Material Print https://www.youtube.com/watch?v=nfIvS50zLyc 2016.02.17 Any Software Instruction Any n/a
0dS3bC0BnRQ.png Loading Filament and Printing with the Hyrel3D MK2-250 https://www.youtube.com/watch?v=0dS3bC0BnRQ 2016.02.09 Any Hardware Instruction MK2-250 n/a
V2ifSlZ0qEw.png Loading Filament and Printing with the Hyrel3D MK1-250 https://www.youtube.com/watch?v=v2ifSlZ0qEw 2016.02.08 Any Hardware Instruction MK1-250 n/a
Q-DbAbNMW48.png Loading and Printing with the EMO-25 Print Head https://www.youtube.com/watch?v=q-DbAbNMW48 2016.02.04 Any Hardware Instruction EMO-25 n/a
Ej55bZXrltA.png SDS RTV Instructions, v2 https://www.youtube.com/watch?v=ej55bZXrltA 2016.02.04 Any Hardware Instruction SDS Series RTV
MwrhV74NjCQ.png Intro to Hyrel Possibilities - Jan 2016 https://www.youtube.com/watch?v=MwrhV74NjCQ 2016.01.25 All Hardware Overview All n/a
V zCytnGvvo.png MK2-250 Dual Drive for Flexible Filaments https://www.youtube.com/watch?v=V_zCytnGvvo 2016.01.20 Any Hardware Introduction MK2-250 n/a
O1IGa-8y9yQ.png 6w, 450nm Laser Test https://www.youtube.com/watch?v=O1IGa-8y9yQ 2016.01.14 Any Hardware Demonstration LA6-450 n/a
0JJp7HeK35M.png SDS RTV Instructions, v1 https://www.youtube.com/watch?v=0JJp7HeK35M 2016.01.14 Any Hardware Instructions SDS Series n/a
XKHa1CXnSdI.png Introducing the SDS Print Heads https://www.youtube.com/watch?v=XKHa1CXnSdI 2016.01.08 Any Hardware Introduction SDS Series n/a
BlSGlOpyipI.png Sneak Peek: Pick and Place Prototype https://www.youtube.com/watch?v=BlSGlOpyipI 2016.01.05 Hydra Hardware Introduction PNP Pick and Place n/a
OceUiuTixPA.png LA6-450: 6w, 450nm Diode Laser Head https://www.youtube.com/watch?v=OceUiuTixPA 2015.12.22 Any Hardware Introduction LA6-450 n/a
Vmw0LS f9V0E.png 3D Printing RTV Silicone https://www.youtube.com/watch?v=vmw0LS_f9V0 2015.12.18 Any Hardware Demonstration SDS-Series n/a
YWe3TQGgNW0.png Loading the VCD-25 https://www.youtube.com/watch?v=YWe3TQGgNW0 2015.12.09 Any Hardware Instruction VCD-25 n/a
HuJuexTLbYA.png Short Porcelain Print Demo https://www.youtube.com/watch?v=huJuexTLbYA 2015.12.08 Any Hardware Demonstration EMO-25 n/a
B583I7AlGJI.png Replacing the Tablet Interface Board https://www.youtube.com/watch?v=b583I7AlGJI 2015.11.25 System 30M, EHR Hardware Instruction n/a n/a
ZKAzXoJ0q8Y.png 2016 Design Contest Video https://www.youtube.com/watch?v=ZKAzXoJ0q8Y 2015.11.17 System 30M Hardware Contest All n/a
YRsyEGHyt3k.png DXF to Laser Gcode Generation https://www.youtube.com/watch?v=YRsyEGHyt3k 2015.10.20 Any Software Instruction Laser, Spindle Tool n/a
Om9cjxMXuxY.png Printing PEEK (PolyEther Ether Ketone) and PC (PolyCarbonate) https://www.youtube.com/watch?v=Om9cjxMXuxY 2015.09.29 Any Hardware Demonstration MK1-450 n/a
IreaoCfQ8mE.png Healing with MeshLab https://www.youtube.com/watch?v=IreaoCfQ8mE 2015.09.01 Any Software Instruction Any n/a
0Aj9WCabPgw.png Postprocessing with a Heat Gun https://www.youtube.com/watch?v=0Aj9WCabPgw 2015.08.17 Any Hardware Instruction Any n/a
4oxCqR DVNQ.png Introduction to Hyrel 3D Possibilities, 2015 https://www.youtube.com/watch?v=4oxCqR_DVNQ 2015.08.11 All Hardware Introduction All n/a
N4QwiuQtjO0.png Updating to Repetrel 2 4xx https://www.youtube.com/watch?v=n4QwiuQtjO0 2015.08.06 All Software Instruction n/a n/a
CFAFRkpLmww.png Updating your 407 Motion Controller https://www.youtube.com/watch?v=cFAFRkpLmww 2015.07.24 All Software Instruction n/a n/a
XKCEkKSolZc.png Replacing the HOTHEAD controller https://www.youtube.com/watch?v=XKCEkKSolZc 2015.07.23 All Hardware Instruction n/a n/a
YM8QMZBTb4o.png Programming the HOTBED controller on the System 30M and ESR https://www.youtube.com/watch?v=yM8QMZBTb4o 2015.07.22 All Software Instruction n/a n/a
CuRcIE-Jbyc.jpg Printing with Cloning - three heads in Parallel https://www.youtube.com/watch?v=cuRcIE-Jbyc 2015.07.21 All Software Instruction n/a n/a
VMyS3h4qiSA.jpg Older Instructions, Slicing for Multiple Head Support https://www.youtube.com/watch?v=VMyS3h4qiSA 2015.07.17 All Software Slicing Any n/a
0gFX6Mh-ths.png Leveling the X-Arm on System 30M, Engine SR https://www.youtube.com/watch?v=0gFX6Mh-ths 2015.06.02 System 30M, Engine SR Hardware Instruction n/a n/a
LZd0ecogGlQ.png Correcting Y-Arm Flexation Fix on the System 30M, Engine SR https://www.youtube.com/watch?v=LZd0ecogGlQ 2015.03.18 System 30M, Engine SR Hardware Instruction n/a n/a
ArDX4UpflmE.png Manually Setting the Z-Zero Position https://www.youtube.com/watch?v=ArDX4UpflmE 2015.03.09 System 30M, Engine SR Hardware Instruction n/a n/a
Vc9gBZtUL7c.png Picking Right 3D Printer For You https://www.youtube.com/watch?v=vc9gBZtUL7c 2015.02.08 All Hardware Overview All n/a
66S9XJ-KeU8.png Changing the Main I/O Board, System 30M, EHR, ESR https://www.youtube.com/watch?v=66S9XJ-KeU8 2015.02.12 All Hardware Overview All n/a
YEePz8 0ttc.png Laser Test Print https://www.youtube.com/watch?v=yEePz8_0ttc 2015.02.17 All Hardware Demonstration LA5-808 Diode Laser n/a
TLHpaePTP-k.png EMO Series Printing Tips https://www.youtube.com/watch?v=tLHpaePTP-k 2015.02.10 All Hardware Instruction EMO Series (EMO, COD, VOL, VCD, KRA, KCD, KR2, KC2) n/a
Zl1sqy6PWx8.jpg Changing Power Supplies in the 30M and ESR https://www.youtube.com/watch?v=Zl1sqy6PWx8 2015.02.04 30M, ESR Hardware Instruction Any n/a
IQscrgv6uaQ.png Multi-Head Calibration Guide https://www.youtube.com/watch?v=IQscrgv6uaQ 2015.02.03 Any Hardware/Software Instruction Any n/a
0lpa4nENtyQ.png LA5-808 "Shark V" Diode Laser https://www.youtube.com/watch?v=0lpa4nENtyQ 2015.01.14 Any Hardware Introduction LA5-808 n/a
MPYPWjnDGho.png Luer Tip Kit for EMO and SDS Series Print Heads https://www.youtube.com/watch?v=mPYPWjnDGho 2014.12.23 Any Hardware Introduction LTK n/a
-VHxf182fIs.png Print Head SDK https://www.youtube.com/watch?v=-VHxf182fIs 2014.12.09 All Hardware, Software Introduction SDK n/a
Fg9omXlYR-Q.png MK Series Printing Tips https://www.youtube.com/watch?v=Fg9omXlYR-Q 2014.11.12 All Procedure Instruction MK Series n/a
EosKDe-SyUI.png Replacing fuses (old) on the Yoke https://www.youtube.com/watch?v=EosKDe-SyUI 2014.08.27 ALL Hardware Instruction All n/a
4yuzpUqeE-Y.png Loading the EMO-type Reservoirs https://www.youtube.com/watch?v=4yuzpUqeE-Y 2014.04.23 ALL Hardware Instruction EMO, COD, VOL, VCD, KRA, KCD, KR2, KC2 n/a
XQFacnpzmv0.png Changing the Economics of 3D Printing https://www.youtube.com/watch?v=xQFacnpzmv0 2013.12.24 All Hardware Demonstration n/a n/a
C9HvQ3SepoM.png System 30 Product Release https://www.youtube.com/watch?v=c9HvQ3SepoM 2013.10.29 System 30 Hardware, Software Introduction n/a n/a
P6aMBQSZPgg.png Simultaneous 3D Printing of Multiple Parts https://www.youtube.com/watch?v=P6aMBQSZPgg 2013.07.02 All Hardware, Software Demonstration MK1-250 n/a
Nuii5rP53Js.png 3D Printing with Sugru The Amazing Self-Setting Rubber https://www.youtube.com/watch?v=nuii5rP53Js 2013.06.19 Any Hardware Demonstration EMO-25 n/a
DihvAQR7LQg.png 3D Printing with Play-Doh https://www.youtube.com/watch?v=dihvAQR7LQg 2013.06.04 All Hardware Demonstration EMO-25 n/a
Cw8XiW46G0k.png 3D Printing with Plasticine https://www.youtube.com/watch?v=cw8XiW46G0k 2013.04.13 Any Hardware Demonstration EMO-25 n/a
Trdz4YDbdsw.png 3D Printing with Air-Dry Modeling Clay https://www.youtube.com/watch?v=trdz4YDbdsw 2013.04.06 Any Hardware Demonstration EMO-25 n/a
XNwv7Dw Zwg.png Interchangeable Hot-Swappable Heads https://www.youtube.com/watch?v=XNwv7Dw_Zwg 2013.05.12 Any Hardware, Software Demonstration MK1-250 n/a
Mu9xMmkZFns.png Thank you, Kickstarters! https://www.youtube.com/watch?v=mu9xMmkZFns 2012.11.05 All Hardware, Software Thank You n/a n/a
Z9rgkw5r4l4.png Quick Tour of our Main Shop! https://www.youtube.com/watch?v=Z9rgkw5r4l4 2012.10.17 All Introduction Thank You n/a n/a

2016-2017

Table of Video Links, 2016-2017
Thumbnail Title Link Date Model Category Activity Material Type Other
B0lvN-aPYHI.png Five Axis Machining on a Hyrel Hydra https://www.youtube.com/watch?v=B0lvN-aPYHI 2019.05.24 Hydra Hardware Machining Rotating Extra Axes
CmBaHHAfbEo.png Dispensing RTV Silicone on a Hyrel Hydra https://www.youtube.com/watch?v=CmBaHHAfbEo 2019.05.21 Hydra Hardware RTV Silicone SDS-30 Silicone
G526vFi8yWI.png Machining PTFE (Teflon) on a Hyrel Hydra https://www.youtube.com/watch?v=G526vFi8yWI 2019.05.08 Hydra Hardware Machining Spindle Tool PTFE
LfmssRdZwuE.jpg Rotating Head Prototype https://www.youtube.com/watch?v=LfmssRdZwuE 2019.05.08 Hydra Hardware Filament Rotating n/a
CbxB96oZFGE.jpg Installing the new Power Supply in a Hyrel Hydra https://www.youtube.com/watch?v=CbxB96oZFGE 2018.08.13 Hydra Hardware 4th Axis 5th Axis n/a
KrwOviaCZuw.jpg Hyrel Tapping Enabled https://www.youtube.com/watch?v=krwOviaCZuw 2018.08.07 Hydra Hardware Spindle Tool Tapping n/a
QuIM9XSYMxE.jpg Light Duty Milling with 3-Phase Spindle on a Hyrel Hydra https://www.youtube.com/watch?v=QuIM9XSYMxE 2018.08.02 Hydra Hardware Spindle Tool Milling n/a
Ni56OFo1VvM.jpg Improved UV Light Source for more Powerful Crosslinking https://www.youtube.com/watch?v=ni56OFo1VvM 2018.07.20 Any Hardware EMO, SDS n/a n/a
68oktmbp8r0.png How to install 4th and 5th Axes on a Hyrel Hydra https://www.youtube.com/watch?v=68oktmbp8r0 2018.06.26 Hydra Hardware 4th Axis 5th Axis n/a
7DcqbBzs-ZQ.png How to use an additional Yoke on a Hyrel Hydra https://www.youtube.com/watch?v=7DcqbBzs-ZQ 2018.06.25 Hydra Hardware Yoke n/a n/a
VerQRjS3iWE.png How to install an additional Yoke on a Hyrel Hydra https://www.youtube.com/watch?v=VerQRjS3iWE 2018.06.23 Hydra Hardware Yoke n/a n/a
JSTmzuuMYvc.png The Filament Dryer https://www.youtube.com/watch?v=jSTmzuuMYvc 2018.06.20 All Hardware Preheating Filaments n/a
LNURH2fRbY0.jpg Fourth and Fifth Axes Demo on a Hyrel Hydra https://www.youtube.com/watch?v=lNURH2fRbY0 2018.04.19 Hydra Hardware 4th Axis 5th Axis n/a
9R6OUMvb.jpg Installing a fourth axis on a Hyrel Hydra https://www.youtube.com/watch?v=_9R6OUMvb-o 2018.04.19 Hydra Hardware 4th Axis n/a n/a
2QqwfsKgzuQ.jpg Machining hotbeds to under 0.001" https://youtu.be/2QqwfsKgzuQ 2018.04.06 Hydra Hardware Hotbed n/a n/a
O1xmXCdj1xE.png Setting the Z-Offset on the EHR https://youtu.be/O1xmXCdj1xE 2018.03.21 EHR Hardware Z-Zero n/a n/a
KqnjlTSg-20.jpg CO2 Laser Marking with the Hydra https://youtu.be/kqnjlTSg-20 2017.11.07 Hydra Hardware Laser n/a n/a
FnYDoNkgOrI.jpg Converting a Hydra from Printer to Laser https://youtu.be/FnYDoNkgOrI 2017.11.07 Hydra Hardware Laser n/a n/a
FHqTlcdISIg.jpg Cutting Nylon Mesh with CO2 Laser on a Hydra https://youtu.be/fHqTlcdISIg 2017.11.07 Hydra Hardware Laser n/a n/a
NTejDT1B6uQ.jpg Chamber Temperature in a Cold Room https://youtu.be/nTejDT1B6uQ 2017.11.07 Hydra Hardware Heater n/a n/a
4Y9V6RWhKj4.jpg Cutting acrylic with the CO2 Laser https://youtu.be/4Y9V6RWhKj4 2017.11.07 Hydra Hardware Application Acrylic n/a
DkMtzPDtIQY.jpg Tiny Heated Chilled Bed Preview https://youtu.be/dkMtzPDtIQY 2017.11.07 EHR, Hydra Hardware Application Bioloicals n/a
GdvyT8HoaOw.jpg Fourth Axis Rotary Print https://youtu.be/gdvyT8HoaOw 2017.10.20 Hydra Hardware Application ABS n/a
3nKqwcXcEgY.png Additive Manufacturing of Toroid Inductor for Electronics Applications https://youtu.be/3nKqwcXcEgY 2017.10.02 30M Hardware Application Conductive, Magnetic Paste
Az7V1FSRJfs.jpg Hyrel Hydra X and Y Belt Tension Adjustments https://www.youtube.com/watch?v=Az7V1FSRJfs 2017.08.17 Hydra Hardware Maintenance n/a n/a
SyMB5063J5E.jpg Hyrel Hydra Linear Bearing Adjustments https://www.youtube.com/watch?v=SyMB5063J5E 2017.08.16 Hydra Hardware Maintenance n/a n/a
ZEsnegXhpLw.jpg Hyrel Hydra Z Belt Tension Adjustments https://www.youtube.com/watch?v=zEsnegXhpLw 2017.08.16 Hydra Hardware Maintenance n/a n/a
WNr59eCGuK4.png Changing the Address Resistor on the CO2 Laser https://www.youtube.com/watch?v=WNr59eCGuK4 2017.08.07 Hydra hardware Update n/a n/a
QBBxkx40H8s.png CO2 Laser Alignment https://www.youtube.com/watch?v=qBBxkx40H8s 2017.07.27 Hydra Hardware Adjustment n/a n/a
YiizFlScq9Q.png Hydra Yoke Adjustment https://www.youtube.com/watch?v=yiizFlScq9Q 2017.07.14 Hydra Hardware Adjustment n/a n/a
CbiCnP YEbA.png Hydra Yoke Angle Adjustment https://www.youtube.com/watch?v=cbiCnP_YEbA 2017.07.13 Model Hardware Adjustment n/a n/a
XMsXzGPHjng.png Engnie, High Resolution (EHR) Setup, Part 2 https://www.youtube.com/watch?v=xMsXzGPHjng 2017.07.10 EHR Hardware, Software Instruction n/a n/a
NbWgw9KY6Ic.png Engnie, High Resolution (EHR) Setup, Part 1 https://www.youtube.com/watch?v=NbWgw9KY6Ic 2017.07. EHR Hardware, Software Instruction n/a n/a
UC7acwIkKmQ.png EHR Scaffold Instructions https://www.youtube.com/watch?v=uC7acwIkKmQ 2017.06.26 EHR Hardware Operation Non-Filament Scaffold
B1x2dvdYkTE.png EHR Scaffold Intro https://www.youtube.com/watch?v=b1x2dvdYkTE 2017.06.26 EHR Hardware Instruction Non-Filament Scaffold
OisWKujfXAI.png Unclogging a rare clogged MK1-250 https://www.youtube.com/watch?v=oisWKujfXAI 2017.06.22 MK1-250, MK2-250 Hardware Maintenance Filament Clog
6FQJuhd2Lxo.png Unclogging a rare clogged MK1-450 https://www.youtube.com/watch?v=6FQJuhd2Lxo 2017.06.22 MK1-450 Hardware Maintenance Filament Clog
WrImt7 Pnxo.png Flashing Firmware on the Modified CO2 Laser Controller https://www.youtube.com/watch?v=WrImt7_Pnxo 2017.06.21 CO2 Laser Firmware Upgrade Laser n/a
1J5bqvcV3Rs.png The Hyrel Hydra Family https://www.youtube.com/watch?v=1J5bqvcV3Rs 3017.06.06 Hydra Hardware Demonstration All n/a
CF7eRdFuZYQ.png High Resolution Engine Vacuum Bed https://www.youtube.com/watch?v=CF7eRdFuZYQ 2017.05.22 EHR Hardware Demonstration Any Vacuum Bed
EltjeQ6KerM.png High Resolution Engine Setup https://www.youtube.com/watch?v=eltjeQ6KerM 2017.05.09 EHR Hardware Instructions Any n/a
SvX4gKqAQDI.png SDS Clench Valve Assembly Instructions https://www.youtube.com/watch?v=SvX4gKqAQDI 2017.05.19 SDS Hardware Instructions Non-Filament n/a
Mz5J8jsb6D4.png How to Load the SDS Clench Valve https://www.youtube.com/watch?v=Mz5J8jsb6D4 2017.05.16 SDS (all EMO-type) Hardware Installation Non-Filament n/a
JwKq8 tahYA.png EHR Accuracy Test https://www.youtube.com/watch?v=JwKq8_tahYA 2017.05.16 EHR Hardware Demonstration All n/a
Udbu Zuh8k0.png Hydra 430, 640, 645 Controls Overview https://www.youtube.com/watch?v=Udbu_Zuh8k0 2017.05.08 Hydra 430, 640, 645 Hardware Overview All n/a
CClPqIJwhLs.png Using Low Temperature Solder Paste to connect a Flat Flex Cable https://www.youtube.com/watch?v=cClPqIJwhLs 2017.04.17 n/a Hardware Demonstration Solder Paste n/a
GCzPw4FOG8c.png Draining Laser Coolant on the Hyrel Hydra https://www.youtube.com/watch?v=GCzPw4FOG8c 2017.04.13 Hydra 640, 645 Hardware Maintenance Laser n/a
PPtGSwyS140.png Hydra Home Calibration Details https://www.youtube.com/watch?v=pPtGSwyS140 2017.04.07 Hydra (All) Firmware Settings n/a n/a
LLIWqTRBhTo.png Replacing the top component on an STS Head Assembly https://www.youtube.com/watch?v=LLIWqTRBhTo 2017.04.05 SDS Hardware Maintenance Non-filament n/a
QxbtI034omk.png HYDRA Hot Bed Installation https://www.youtube.com/watch?v=qxbtI034omk 2017.03.22 Hydra (All) Hardware Installation All n/a
FuLCsqfAX3E.png Hydra Model Startup https://www.youtube.com/watch?v=fuLCsqfAX3E 2017.03.22 Hydra (All) Hardware Startup All n/a
LhnV9H7LV9g.png Unboxing the Hydra Floor Model Units https://www.youtube.com/watch?v=LhnV9H7LV9g 2017.03.19 Hydra (All) Hardware Startup All n/a
ULpn18OqD-U.png Hydra Overview by CTO Karl Gifford https://www.youtube.com/watch?v=ULpn18OqD-U 2017.03.09 Hydra (All Hardware Overview All n/a
QEfskyU7LJ4.png How to Manage the Pick-and-Place with Repetrel Software https://www.youtube.com/watch?v=QEfskyU7LJ4 2017.03.02 PNP Hardware Setup PNP n/a
Jz3onGdmW1c.png Hyrel Hydra Versitility https://www.youtube.com/watch?v=Jz3onGdmW1c 2017.02.08 Hydra (All) Hardware Introduction All n/a
PKkrd4R 54Y.png Hydra Vinyl Cutter Overview https://www.youtube.com/watch?v=pKkrd4R_54Y 2017.02.16 Hydra (All) Hardware Demonstration Vinyl n/a
HaKWeCbXkMI.png Hyrel 3D Hydra Pick-and-Place Introduction https://www.youtube.com/watch?v=haKWeCbXkMI 2017.02.10 Hydra (All) Hardware Introduction Pick-And-Place n/a
UACoqtNbXE0.png The Hyrel3D Hydra Line https://www.youtube.com/watch?v=uACoqtNbXE0 2017.01.26 Hydra Hardware Introduction All n/a
KAoSS-Z-aeY.png Tramming the bed on the 16A https://www.youtube.com/watch?v=KAoSS-Z-aeY 2017.01.19 Hydra (All) Hardware Maintenance n/a n/a
TibkVZB n9c.png The Benefits of Microscope Inspection During Printing https://www.youtube.com/watch?v=tibkVZB_n9c 2017.01.06 All Hardware Instruction All n/a
AR4d-2BZj Y.png Printing PLGA for internal Biological Applications https://www.youtube.com/watch?v=aR4d-2BZj_Y 2017.01.02 All Hardware Maintenance Emulsion n/a
Z4IGQ5JMP6g.png Varialble Width Conductive Paste Extrusion https://www.youtube.com/watch?v=z4IGQ5JMP6g 2016.12.30 All Hardware Introduction Emulsion n/a
2f5FEhVsqy8.png Microscope Print View Setup https://www.youtube.com/watch?v=2f5FEhVsqy8 2016.12.30 All Hardware Maintenance All n/a
D2sWEYRVAII.png Replacing the LED Strip https://www.youtube.com/watch?v=D2sWEYRVAII 2016.12.23 System 30M Hardware Maintenance LEDs n/a
14ynZ3DHzVg.png Replacing the Front Switch Panel https://www.youtube.com/watch?v=14ynZ3DHzVg 2016.12.23 System 30M Hardware Maintenance Switch Panel n/a
DQj6oLfrbLo.png Static Mixing Head Explained - v2 Including SDS Heads https://www.youtube.com/watch?v=DQj6oLfrbLo 2016.12.20 All Hardware Introduction Emulsion n/a
VJXnB-8JII.png Hot Bed Manufacturing https://www.youtube.com/watch?v=_vJXnB-8JII 2016.12.16 Hydra Hardware Instruction All HotBed
3azICOBuHdk.png Static Mixing Head Explained https://www.youtube.com/watch?v=3azICOBuHdk 2016.12.15 MODEL Hardware Instruction Emulsion Static Mixing
6qJ-2uFt- Y.png Timelapse Recording https://www.youtube.com/watch?v=6qJ-2uFt-_Y 2016.12.06 All Software Instruction n/a n/a
ROpcvqS r8s.png HotHead LEDs Explained https://www.youtube.com/watch?v=ROpcvqS_r8s 2016.12.06 All Hardware Instruction All LEDs
Tz6mRSkOaSk.png LA6-450 and LA5-808 Laser Overview https://www.youtube.com/watch?v=Tz6mRSkOaSk 2016.12.02 LA5-808, LA6-450 Hardware Instruction Laser n/a
H95IurET7UM.png SDS and CSD Overview https://www.youtube.com/watch?v=h95IurET7UM 2016.11.29 SDS, CSD Hardware Instruction Emulsion n/a
4B9hoMLNOuQ.png Quiet Storm Cooling Fan Overview https://www.youtube.com/watch?v=4B9hoMLNOuQ 2016.11.28 QS Hardware Overview Filament n/a
9 onCKhT dg.png VOL-25 and VCD-25 Overview https://www.youtube.com/watch?v=9_onCKhT_dg 2016.11.28 VOL-25, VCD-25 Hardware Overview Emulsion n/a
QD2FrZ4kg1g.png KRA-15 and KCD-15 Overview https://www.youtube.com/watch?v=QD2FrZ4kg1g 2016.11.28 KRA-15, KCD-15 Hardware Overview Emulsion n/a
Rc2UFwjUtc4.png Hydra 640 (16A) Two Part Test Print https://www.youtube.com/watch?v=Rc2UFwjUtc4 2016.11.23 Hydra (All) Hardware Demonstration Filament n/a
Ql1NZLWVJQM.png Extrusion Prototype Print https://www.youtube.com/watch?v=Ql1NZLWVJQM 2016.11.23 Hydra 640 Hardware Demonstration Filament n/a
KtK256u0sN8.png EMO-25 and COD-25 Overview https://www.youtube.com/watch?v=ktK256u0sN8 2016.11.17 EMO-25, COD-25 Hardware Overview Emulsion n/a
Vn8jnvwh5to.png Session 3C Slicing for Multiple Head Support https://www.youtube.com/watch?v=Vn8jnvwh5to 2016.11.15 Any Software Slicing Any n/a
P1Ihd4ETxhg.png Session 3A - Setting Two Heads to Z-Zero https://www.youtube.com/watch?v=p1Ihd4ETxhg 2016.11.14 All Software Instruction All n/a
FCuSvQm6ej4.png Session 3B - Calibrating the Offset Between Two Heads https://www.youtube.com/watch?v=FCuSvQm6ej4 2016.11.14 All Software Instruction All n/a
DkQpsJWRI4Y.png Session 2D - Editing Slic3r Recipes https://www.youtube.com/watch?v=dkQpsJWRI4Y 2016.11.109 All Software Instruction All n/a
KJc9sNlV0fA.png Session 2E - Slicing your STL and Viewing your GCODE https://www.youtube.com/watch?v=kJc9sNlV0fA 2016.11.09 All Software Instruction All n/a
IQbgGwiGVZA.png Session 2C - Positioning, Scaling, and Rotating your STL https://www.youtube.com/watch?v=IQbgGwiGVZA 2016. All Software Instruction All n/a
MVyCq7CPGLg.png Session 1A - Hardware and Software Overview https://www.youtube.com/watch?v=mVyCq7CPGLg 2016.11.03 All Software Instruction All n/a
2tIHw JIQAI.png Session 1B - Communications and Bed Leveling https://www.youtube.com/watch?v=2tIHw_JIQAI 2016.11.02 All Software Instruction All n/a
LFATCfKJf4I.png Session 1C - Printing with Plasticine https://www.youtube.com/watch?v=lFATCfKJf4I 2016.11.02 All Software Instruction All n/a
2yHRuef29L4.png Session 2A: Simple CAD Modeling in FreeCAD https://www.youtube.com/watch?v=2yHRuef29L4 2016.08.24 All Software Instruction All n/a
ELGIRAgLz4w.png Session 2B - Healing an STL in MeshLab https://www.youtube.com/watch?v=eLGIRAgLz4w 2016.08.17 All Software Instruction All n/a
RlJqdhtpB6Q.png PC to Printer Connectivity https://www.youtube.com/watch?v=RlJqdhtpB6Q 2016.11.01 All Software Instruction All n/a
C88ni0huwhw.png Using the Spindle Tool to rework Circuit Boards https://www.youtube.com/watch?v=C88ni0huwhw 2016.10.27 All Hardware Instruction Spindle Tool n/a
KIGeQmXNbNE.png Running a FADAL CNC on Hyrel3D Circuitry, Firmware and Software https://www.youtube.com/watch?v=KIGeQmXNbNE 2016.10.17 All All Demonstration n/a n/a
ImMo3V1D70w.png Table Arm (X-Arm) Block Adjustment https://www.youtube.com/watch?v=ImMo3V1D70w 2016.10.14 Non-Hydras Hardware Maintenance All n/a
YaCYFmoIESk.png MK1-250 Overview https://www.youtube.com/watch?v=yaCYFmoIESk 2016.10.14 All Hardware Instruction MK1-250 n/a
UvZMecXsHEM.png MK1-450 Overview https://www.youtube.com/watch?v=UvZMecXsHEM 2016.10.14 All Hardware Instruction MK1-450 n/a
SOGKeU3vLbs.png MK2-250 Overview https://www.youtube.com/watch?v=SOGKeU3vLbs 2016.10.14 All Hardware Instruction MK2-250 n/a
FkJT3ILlAHw.png Hyrel3D Replacing the Heated Build Platform https://www.youtube.com/watch?v=FkJT3ILlAHw 2016.10.03 All Hardware Instruction HotBed n/a
3KwJ6OgOx14.png Multi Head Printing - Nested STLs https://www.youtube.com/watch?v=3KwJ6OgOx14 2016.09.22 All Software Instruction All n/a
4GYWfMrs0F8.png X-Axis Belt Tightening https://www.youtube.com/watch?v=4GYWfMrs0F8 2016.09.22 S30, ESR Hardware Maintenance All n/a
IkgviAGep-c.png Y-Axis Belt Tightening https://www.youtube.com/watch?v=IkgviAGep-c 2016.09.21 S30, ESR Hardware Maintenance All n/a
LQy25Nlj3 Q.png Plasma Magnetic Vortex Deposition (ElectroSpinning) https://www.youtube.com/watch?v=lQy25Nlj3_Q 2016.09.21 Any Hardware Demonstration EMO-HV n/a
LQb5vS97jFo.png 3D Milling on the Hydra Series https://www.youtube.com/watch?v=LQb5vS97jFo 2016.09.02 Hydra Hardware Demonstration ST1 Spindle Tool n/a
81sVBZOOcbw.png Introducing the Hydra 640 (formerly Model 16A) https://www.youtube.com/watch?v=81sVBZOOcbw 2016.08.05 Hydra Hardware Introduction Any n/a
UPqr4S0WC3Q.png USBB Jumper Instructions https://www.youtube.com/watch?v=uPqr4S0WC3Q 2016.07.19 S30M, ESR, EHR Hardware Instruction Any n/a
Rw2E d-q9bQ.png Size Does Matter https://www.youtube.com/watch?v=Rw2E_d-q9bQ 2016.07.11 Hydra Series Hardware Introduction Any n/a
XGriCCrfkuw.png Print Heads Overview https://www.youtube.com/watch?v=xGriCCrfkuw 2016.006.16 Any Hardware Overview Print Heads n/a
QMyuKdgiWI4.png Session 2F - Loading and Printing with Filaments, MK-Series Heads https://www.youtube.com/watch?v=QMyuKdgiWI4 2016.06.03 Any Hardware Instruction MK Series n/a
YsO8oAzFwC4.png MK1-250 PEEK Nozzle Assembly https://www.youtube.com/watch?v=ysO8oAzFwC4 2016.05.02 Any Hardware Instruction MK1-250, MK2-250 n/a
BoHRC9m5nlQ.png New Hydra Printer Line Intro https://www.youtube.com/watch?v=BoHRC9m5nlQ 2016.03.28 Hydra Hardware Introduction Any n/a
XREWb Md5o0.png Bioplotting for under $10K https://www.youtube.com/watch?v=XREWb_Md5o0 2016.02.17 Any Hardware Introduction SDS Series n/a
9zxxBYbdlOE.png Programming Head Offsets https://www.youtube.com/watch?v=9zxxBYbdlOE 2016.02.17 All Software Instruction Any n/a
NfIvS50zLyc.png Slicing for a Two-Material Print https://www.youtube.com/watch?v=nfIvS50zLyc 2016.02.17 Any Software Instruction Any n/a
0dS3bC0BnRQ.png Loading Filament and Printing with the Hyrel3D MK2-250 https://www.youtube.com/watch?v=0dS3bC0BnRQ 2016.02.09 Any Hardware Instruction MK2-250 n/a
V2ifSlZ0qEw.png Loading Filament and Printing with the Hyrel3D MK1-250 https://www.youtube.com/watch?v=v2ifSlZ0qEw 2016.02.08 Any Hardware Instruction MK1-250 n/a
Q-DbAbNMW48.png Loading and Printing with the EMO-25 Print Head https://www.youtube.com/watch?v=q-DbAbNMW48 2016.02.04 Any Hardware Instruction EMO-25 n/a
Ej55bZXrltA.png SDS RTV Instructions, v2 https://www.youtube.com/watch?v=ej55bZXrltA 2016.02.04 Any Hardware Instruction SDS Series RTV
MwrhV74NjCQ.png Intro to Hyrel Possibilities - Jan 2016 https://www.youtube.com/watch?v=MwrhV74NjCQ 2016.01.25 All Hardware Overview All n/a
V zCytnGvvo.png MK2-250 Dual Drive for Flexible Filaments https://www.youtube.com/watch?v=V_zCytnGvvo 2016.01.20 Any Hardware Introduction MK2-250 n/a
O1IGa-8y9yQ.png 6w, 450nm Laser Test https://www.youtube.com/watch?v=O1IGa-8y9yQ 2016.01.14 Any Hardware Demonstration LA6-450 n/a
0JJp7HeK35M.png SDS RTV Instructions, v1 https://www.youtube.com/watch?v=0JJp7HeK35M 2016.01.14 Any Hardware Instructions SDS Series n/a
XKHa1CXnSdI.png Introducing the SDS Print Heads https://www.youtube.com/watch?v=XKHa1CXnSdI 2016.01.08 Any Hardware Introduction SDS Series n/a
BlSGlOpyipI.png Sneak Peek: Pick and Place Prototype https://www.youtube.com/watch?v=BlSGlOpyipI 2016.01.05 Hydra Hardware Introduction PNP Pick and Place n/a
OceUiuTixPA.png LA6-450: 6w, 450nm Diode Laser Head https://www.youtube.com/watch?v=OceUiuTixPA 2015.12.22 Any Hardware Introduction LA6-450 n/a
Vmw0LS f9V0E.png 3D Printing RTV Silicone https://www.youtube.com/watch?v=vmw0LS_f9V0 2015.12.18 Any Hardware Demonstration SDS-Series n/a
YWe3TQGgNW0.png Loading the VCD-25 https://www.youtube.com/watch?v=YWe3TQGgNW0 2015.12.09 Any Hardware Instruction VCD-25 n/a
HuJuexTLbYA.png Short Porcelain Print Demo https://www.youtube.com/watch?v=huJuexTLbYA 2015.12.08 Any Hardware Demonstration EMO-25 n/a
B583I7AlGJI.png Replacing the Tablet Interface Board https://www.youtube.com/watch?v=b583I7AlGJI 2015.11.25 System 30M, EHR Hardware Instruction n/a n/a
ZKAzXoJ0q8Y.png 2016 Design Contest Video https://www.youtube.com/watch?v=ZKAzXoJ0q8Y 2015.11.17 System 30M Hardware Contest All n/a
YRsyEGHyt3k.png DXF to Laser Gcode Generation https://www.youtube.com/watch?v=YRsyEGHyt3k 2015.10.20 Any Software Instruction Laser, Spindle Tool n/a
Om9cjxMXuxY.png Printing PEEK (PolyEther Ether Ketone) and PC (PolyCarbonate) https://www.youtube.com/watch?v=Om9cjxMXuxY 2015.09.29 Any Hardware Demonstration MK1-450 n/a
IreaoCfQ8mE.png Healing with MeshLab https://www.youtube.com/watch?v=IreaoCfQ8mE 2015.09.01 Any Software Instruction Any n/a
0Aj9WCabPgw.png Postprocessing with a Heat Gun https://www.youtube.com/watch?v=0Aj9WCabPgw 2015.08.17 Any Hardware Instruction Any n/a
4oxCqR DVNQ.png Introduction to Hyrel 3D Possibilities, 2015 https://www.youtube.com/watch?v=4oxCqR_DVNQ 2015.08.11 All Hardware Introduction All n/a
N4QwiuQtjO0.png Updating to Repetrel 2 4xx https://www.youtube.com/watch?v=n4QwiuQtjO0 2015.08.06 All Software Instruction n/a n/a
CFAFRkpLmww.png Updating your 407 Motion Controller https://www.youtube.com/watch?v=cFAFRkpLmww 2015.07.24 All Software Instruction n/a n/a
XKCEkKSolZc.png Replacing the HOTHEAD controller https://www.youtube.com/watch?v=XKCEkKSolZc 2015.07.23 All Hardware Instruction n/a n/a
YM8QMZBTb4o.png Programming the HOTBED controller on the System 30M and ESR https://www.youtube.com/watch?v=yM8QMZBTb4o 2015.07.22 All Software Instruction n/a n/a
CuRcIE-Jbyc.jpg Printing with Cloning - three heads in Parallel https://www.youtube.com/watch?v=cuRcIE-Jbyc 2015.07.21 All Software Instruction n/a n/a
VMyS3h4qiSA.jpg Older Instructions, Slicing for Multiple Head Support https://www.youtube.com/watch?v=VMyS3h4qiSA 2015.07.17 All Software Slicing Any n/a
0gFX6Mh-ths.png Leveling the X-Arm on System 30M, Engine SR https://www.youtube.com/watch?v=0gFX6Mh-ths 2015.06.02 System 30M, Engine SR Hardware Instruction n/a n/a
LZd0ecogGlQ.png Correcting Y-Arm Flexation Fix on the System 30M, Engine SR https://www.youtube.com/watch?v=LZd0ecogGlQ 2015.03.18 System 30M, Engine SR Hardware Instruction n/a n/a
ArDX4UpflmE.png Manually Setting the Z-Zero Position https://www.youtube.com/watch?v=ArDX4UpflmE 2015.03.09 System 30M, Engine SR Hardware Instruction n/a n/a
Vc9gBZtUL7c.png Picking Right 3D Printer For You https://www.youtube.com/watch?v=vc9gBZtUL7c 2015.02.08 All Hardware Overview All n/a
66S9XJ-KeU8.png Changing the Main I/O Board, System 30M, EHR, ESR https://www.youtube.com/watch?v=66S9XJ-KeU8 2015.02.12 All Hardware Overview All n/a
YEePz8 0ttc.png Laser Test Print https://www.youtube.com/watch?v=yEePz8_0ttc 2015.02.17 All Hardware Demonstration LA5-808 Diode Laser n/a
TLHpaePTP-k.png EMO Series Printing Tips https://www.youtube.com/watch?v=tLHpaePTP-k 2015.02.10 All Hardware Instruction EMO Series (EMO, COD, VOL, VCD, KRA, KCD, KR2, KC2) n/a
Zl1sqy6PWx8.jpg Changing Power Supplies in the 30M and ESR https://www.youtube.com/watch?v=Zl1sqy6PWx8 2015.02.04 30M, ESR Hardware Instruction Any n/a
IQscrgv6uaQ.png Multi-Head Calibration Guide https://www.youtube.com/watch?v=IQscrgv6uaQ 2015.02.03 Any Hardware/Software Instruction Any n/a
0lpa4nENtyQ.png LA5-808 "Shark V" Diode Laser https://www.youtube.com/watch?v=0lpa4nENtyQ 2015.01.14 Any Hardware Introduction LA5-808 n/a
MPYPWjnDGho.png Luer Tip Kit for EMO and SDS Series Print Heads https://www.youtube.com/watch?v=mPYPWjnDGho 2014.12.23 Any Hardware Introduction LTK n/a
-VHxf182fIs.png Print Head SDK https://www.youtube.com/watch?v=-VHxf182fIs 2014.12.09 All Hardware, Software Introduction SDK n/a
Fg9omXlYR-Q.png MK Series Printing Tips https://www.youtube.com/watch?v=Fg9omXlYR-Q 2014.11.12 All Procedure Instruction MK Series n/a
EosKDe-SyUI.png Replacing fuses (old) on the Yoke https://www.youtube.com/watch?v=EosKDe-SyUI 2014.08.27 ALL Hardware Instruction All n/a
4yuzpUqeE-Y.png Loading the EMO-type Reservoirs https://www.youtube.com/watch?v=4yuzpUqeE-Y 2014.04.23 ALL Hardware Instruction EMO, COD, VOL, VCD, KRA, KCD, KR2, KC2 n/a
XQFacnpzmv0.png Changing the Economics of 3D Printing https://www.youtube.com/watch?v=xQFacnpzmv0 2013.12.24 All Hardware Demonstration n/a n/a
C9HvQ3SepoM.png System 30 Product Release https://www.youtube.com/watch?v=c9HvQ3SepoM 2013.10.29 System 30 Hardware, Software Introduction n/a n/a
P6aMBQSZPgg.png Simultaneous 3D Printing of Multiple Parts https://www.youtube.com/watch?v=P6aMBQSZPgg 2013.07.02 All Hardware, Software Demonstration MK1-250 n/a
Nuii5rP53Js.png 3D Printing with Sugru The Amazing Self-Setting Rubber https://www.youtube.com/watch?v=nuii5rP53Js 2013.06.19 Any Hardware Demonstration EMO-25 n/a
DihvAQR7LQg.png 3D Printing with Play-Doh https://www.youtube.com/watch?v=dihvAQR7LQg 2013.06.04 All Hardware Demonstration EMO-25 n/a
Cw8XiW46G0k.png 3D Printing with Plasticine https://www.youtube.com/watch?v=cw8XiW46G0k 2013.04.13 Any Hardware Demonstration EMO-25 n/a
Trdz4YDbdsw.png 3D Printing with Air-Dry Modeling Clay https://www.youtube.com/watch?v=trdz4YDbdsw 2013.04.06 Any Hardware Demonstration EMO-25 n/a
XNwv7Dw Zwg.png Interchangeable Hot-Swappable Heads https://www.youtube.com/watch?v=XNwv7Dw_Zwg 2013.05.12 Any Hardware, Software Demonstration MK1-250 n/a
Mu9xMmkZFns.png Thank you, Kickstarters! https://www.youtube.com/watch?v=mu9xMmkZFns 2012.11.05 All Hardware, Software Thank You n/a n/a
Z9rgkw5r4l4.png Quick Tour of our Main Shop! https://www.youtube.com/watch?v=Z9rgkw5r4l4 2012.10.17 All Introduction Thank You n/a n/a

2012-2015

Table of Video Links, 2012-2015
Thumbnail Title Link Date Model Category Activity Material Type Other
OceUiuTixPA.png LA6-450: 6w, 450nm Diode Laser Head https://www.youtube.com/watch?v=OceUiuTixPA 2015.12.22 Any Hardware Introduction LA6-450 n/a
Vmw0LS f9V0E.png 3D Printing RTV Silicone https://www.youtube.com/watch?v=vmw0LS_f9V0 2015.12.18 Any Hardware Demonstration SDS-Series n/a
YWe3TQGgNW0.png Loading the VCD-25 https://www.youtube.com/watch?v=YWe3TQGgNW0 2015.12.09 Any Hardware Instruction VCD-25 n/a
HuJuexTLbYA.png Short Porcelain Print Demo https://www.youtube.com/watch?v=huJuexTLbYA 2015.12.08 Any Hardware Demonstration EMO-25 n/a
B583I7AlGJI.png Replacing the Tablet Interface Board https://www.youtube.com/watch?v=b583I7AlGJI 2015.11.25 System 30M, EHR Hardware Instruction n/a n/a
ZKAzXoJ0q8Y.png 2016 Design Contest Video https://www.youtube.com/watch?v=ZKAzXoJ0q8Y 2015.11.17 System 30M Hardware Contest All n/a
YRsyEGHyt3k.png DXF to Laser Gcode Generation https://www.youtube.com/watch?v=YRsyEGHyt3k 2015.10.20 Any Software Instruction Laser, Spindle Tool n/a
Om9cjxMXuxY.png Printing PEEK (PolyEther Ether Ketone) and PC (PolyCarbonate) https://www.youtube.com/watch?v=Om9cjxMXuxY 2015.09.29 Any Hardware Demonstration MK1-450 n/a
IreaoCfQ8mE.png Healing with MeshLab https://www.youtube.com/watch?v=IreaoCfQ8mE 2015.09.01 Any Software Instruction Any n/a
0Aj9WCabPgw.png Postprocessing with a Heat Gun https://www.youtube.com/watch?v=0Aj9WCabPgw 2015.08.17 Any Hardware Instruction Any n/a
4oxCqR DVNQ.png Introduction to Hyrel 3D Possibilities, 2015 https://www.youtube.com/watch?v=4oxCqR_DVNQ 2015.08.11 All Hardware Introduction All n/a
N4QwiuQtjO0.png Updating to Repetrel 2 4xx https://www.youtube.com/watch?v=n4QwiuQtjO0 2015.08.06 All Software Instruction n/a n/a
CFAFRkpLmww.png Updating your 407 Motion Controller https://www.youtube.com/watch?v=cFAFRkpLmww 2015.07.24 All Software Instruction n/a n/a
XKCEkKSolZc.png Replacing the HOTHEAD controller https://www.youtube.com/watch?v=XKCEkKSolZc 2015.07.23 All Hardware Instruction n/a n/a
YM8QMZBTb4o.png Programming the HOTBED controller on the System 30M and ESR https://www.youtube.com/watch?v=yM8QMZBTb4o 2015.07.22 All Software Instruction n/a n/a
CuRcIE-Jbyc.jpg Printing with Cloning - three heads in Parallel https://www.youtube.com/watch?v=cuRcIE-Jbyc 2015.07.21 All Software Instruction n/a n/a
VMyS3h4qiSA.jpg Older Instructions, Slicing for Multiple Head Support https://www.youtube.com/watch?v=VMyS3h4qiSA 2015.07.17 All Software Slicing Any n/a
0gFX6Mh-ths.png Leveling the X-Arm on System 30M, Engine SR https://www.youtube.com/watch?v=0gFX6Mh-ths 2015.06.02 System 30M, Engine SR Hardware Instruction n/a n/a
LZd0ecogGlQ.png Correcting Y-Arm Flexation Fix on the System 30M, Engine SR https://www.youtube.com/watch?v=LZd0ecogGlQ 2015.03.18 System 30M, Engine SR Hardware Instruction n/a n/a
ArDX4UpflmE.png Manually Setting the Z-Zero Position https://www.youtube.com/watch?v=ArDX4UpflmE 2015.03.09 System 30M, Engine SR Hardware Instruction n/a n/a
Vc9gBZtUL7c.png Picking Right 3D Printer For You https://www.youtube.com/watch?v=vc9gBZtUL7c 2015.02.08 All Hardware Overview All n/a
66S9XJ-KeU8.png Changing the Main I/O Board, System 30M, EHR, ESR https://www.youtube.com/watch?v=66S9XJ-KeU8 2015.02.12 All Hardware Overview All n/a
YEePz8 0ttc.png Laser Test Print https://www.youtube.com/watch?v=yEePz8_0ttc 2015.02.17 All Hardware Demonstration LA5-808 Diode Laser n/a
TLHpaePTP-k.png EMO Series Printing Tips https://www.youtube.com/watch?v=tLHpaePTP-k 2015.02.10 All Hardware Instruction EMO Series (EMO, COD, VOL, VCD, KRA, KCD, KR2, KC2) n/a
Zl1sqy6PWx8.jpg Changing Power Supplies in the 30M and ESR https://www.youtube.com/watch?v=Zl1sqy6PWx8 2015.02.04 30M, ESR Hardware Instruction Any n/a
IQscrgv6uaQ.png Multi-Head Calibration Guide https://www.youtube.com/watch?v=IQscrgv6uaQ 2015.02.03 Any Hardware/Software Instruction Any n/a
0lpa4nENtyQ.png LA5-808 "Shark V" Diode Laser https://www.youtube.com/watch?v=0lpa4nENtyQ 2015.01.14 Any Hardware Introduction LA5-808 n/a
MPYPWjnDGho.png Luer Tip Kit for EMO and SDS Series Print Heads https://www.youtube.com/watch?v=mPYPWjnDGho 2014.12.23 Any Hardware Introduction LTK n/a
-VHxf182fIs.png Print Head SDK https://www.youtube.com/watch?v=-VHxf182fIs 2014.12.09 All Hardware, Software Introduction SDK n/a
Fg9omXlYR-Q.png MK Series Printing Tips https://www.youtube.com/watch?v=Fg9omXlYR-Q 2014.11.12 All Procedure Instruction MK Series n/a
EosKDe-SyUI.png Replacing fuses (old) on the Yoke https://www.youtube.com/watch?v=EosKDe-SyUI 2014.08.27 ALL Hardware Instruction All n/a
4yuzpUqeE-Y.png Loading the EMO-type Reservoirs https://www.youtube.com/watch?v=4yuzpUqeE-Y 2014.04.23 ALL Hardware Instruction EMO, COD, VOL, VCD, KRA, KCD, KR2, KC2 n/a
XQFacnpzmv0.png Changing the Economics of 3D Printing https://www.youtube.com/watch?v=xQFacnpzmv0 2013.12.24 All Hardware Demonstration n/a n/a
C9HvQ3SepoM.png System 30 Product Release https://www.youtube.com/watch?v=c9HvQ3SepoM 2013.10.29 System 30 Hardware, Software Introduction n/a n/a
P6aMBQSZPgg.png Simultaneous 3D Printing of Multiple Parts https://www.youtube.com/watch?v=P6aMBQSZPgg 2013.07.02 All Hardware, Software Demonstration MK1-250 n/a
Nuii5rP53Js.png 3D Printing with Sugru The Amazing Self-Setting Rubber https://www.youtube.com/watch?v=nuii5rP53Js 2013.06.19 Any Hardware Demonstration EMO-25 n/a
DihvAQR7LQg.png 3D Printing with Play-Doh https://www.youtube.com/watch?v=dihvAQR7LQg 2013.06.04 All Hardware Demonstration EMO-25 n/a
Cw8XiW46G0k.png 3D Printing with Plasticine https://www.youtube.com/watch?v=cw8XiW46G0k 2013.04.13 Any Hardware Demonstration EMO-25 n/a
Trdz4YDbdsw.png 3D Printing with Air-Dry Modeling Clay https://www.youtube.com/watch?v=trdz4YDbdsw 2013.04.06 Any Hardware Demonstration EMO-25 n/a
XNwv7Dw Zwg.png Interchangeable Hot-Swappable Heads https://www.youtube.com/watch?v=XNwv7Dw_Zwg 2013.05.12 Any Hardware, Software Demonstration MK1-250 n/a
Mu9xMmkZFns.png Thank you, Kickstarters! https://www.youtube.com/watch?v=mu9xMmkZFns 2012.11.05 All Hardware, Software Thank You n/a n/a
Z9rgkw5r4l4.png Quick Tour of our Main Shop! https://www.youtube.com/watch?v=Z9rgkw5r4l4 2012.10.17 All Introduction Thank You n/a n/a
Retrieved from "https://hyrel3d.in/wiki/index.php?title=Videos&oldid=3067"