Difference between revisions of "Test4"
Jump to navigation
Jump to search
(→5 Flow) |
|||
| Line 108: | Line 108: | ||
! Brief Description | ! Brief Description | ||
|- | |- | ||
! [[# | ! [[#G10_UNUSED|G10]] | ||
| Yes || | | ''No'' || ''Absolute E'' | ||
|- | |||
! [[#G11_UNUSED|G11]] | |||
| ''No'' || ''Relative E'' | |||
|- | |||
! [[#M82_Absolute_E-Values|M82]] | |||
| Yes || Absolute E-Values | |||
|- | |||
! [[#M83_Relative_E-Values|M83]] | |||
| Yes || Relative E-Values | |||
|- | |||
! [[#M221_Set_Flow_Rate|M221]] | |||
| Yes || Set Flow Rate | |||
|- | |||
! [[#M229_Use_E_Values|M229]] | |||
| Yes || Use E Values | |||
|- | |||
! [[#M721_Set_Unprime_Values|M721]] | |||
| Yes || Set Unprime Values | |||
|- | |||
! [[#M722_Set_Prime_Values|M722]] | |||
| Yes || Set Prime Values | |||
|- | |||
! [[#M723_Set_Manual_Flow|M723]] | |||
| Yes || Set Manual Flow | |||
|- | |||
! [[#M728_Set_Motor_Current_Boost|M728]] | |||
| Yes || Set Motor Current Boost | |||
|- | |||
! [[#M756_Set_Height_for_Flow|M756]] | |||
| Yes || Set Height for Flow | |||
|- | |- | ||
|} | |} | ||
Revision as of 17:05, 21 May 2020
3 Movement
| Controlling Movement | ||
|---|---|---|
| Code | Supported | Brief Description |
| G0 | Yes | Rapid Move |
| G1 | Yes | Working Move |
| G2 | Yes | Clockwise Arc |
| G2.1 | Yes | Spiral CW Arc1 |
| G2.2 | Yes | Spiral CW Arc2 |
| G2.3 | Yes | 3-Space CW Spiral Arc |
| G3 | Yes | Counterclockwise Arc |
| [[#G3.1_Spiral_CCW_Arc1|G3.1]] | Yes | Spiral CCW Arc1 |
| G3.2 | Yes | Spiral CCW Arc2 |
| G3.3 | Yes | 3-Space CCW Spiral Arc |
| G4 | Yes | Timed Pause |
| G16 | Yes | Arc in Any Plane |
| G17 | Yes | Arc in XY Plane |
| G18 | Yes | Arc in XZ Plane |
| G19 | Yes | Arc in YZ Plane |
| M0 | Yes | Stop Until Resume |
| M203 | Yes | Set G0 Speed |
4 Temperature
| Controlling Temperature | ||
|---|---|---|
| Code | Supported | Brief Description |
| M104 | Yes | Set Temp (Head) |
| M106 | Yes | Set Cooling / Etc. |
| M107 | Yes | Stop Cooling / Etc. |
| M109 | Yes | Wait for Temp (Head) |
| M116 | No | Pause for All Temps |
| M140 | Yes | Set Temp (Bed) |
| M141 | Yes | Set Temp (Chamber) |
| M190 | Yes | Wait for Temp (Bed) |
| M191 | Yes | Wait for Temp (Chamber) |
5 Flow
| Controlling Material Flow | ||
|---|---|---|
| Code | Supported | Brief Description |
| G10 | No | Absolute E |
| G11 | No | Relative E |
| M82 | Yes | Absolute E-Values |
| M83 | Yes | Relative E-Values |
| M221 | Yes | Set Flow Rate |
| M229 | Yes | Use E Values |
| M721 | Yes | Set Unprime Values |
| M722 | Yes | Set Prime Values |
| M723 | Yes | Set Manual Flow |
| M728 | Yes | Set Motor Current Boost |
| M756 | Yes | Set Height for Flow |
6 Position
| Controlling Positin and Offsets | ||
|---|---|---|
| Code | Supported | Brief Description |
| G0 | Yes | Rapid Move |
7 Lasers
| Controlling Lasers and UV Pens | ||
|---|---|---|
| Code | Supported | Brief Description |
| G0 | Yes | Rapid Move |
8 Spindles
| Controlling Spindles and Lathes | ||
|---|---|---|
| Code | Supported | Brief Description |
| G0 | Yes | Rapid Move |
9 Reporting
| Reporting and Diagnostics | ||
|---|---|---|
| Code | Supported | Brief Description |
| G0 | Yes | Rapid Move |
10 Aux Devices
| Controlling Aux Devices | ||
|---|---|---|
| Code | Supported | Brief Description |
| G0 | Yes | Rapid Move |
11 Other
| Other Commands | ||
|---|---|---|
| Code | Supported | Brief Description |
| G0 | Yes | Rapid Move |