Difference between revisions of "Test4"
Jump to navigation
Jump to search
(→5 Flow) |
|||
| Line 161: | Line 161: | ||
! Brief Description | ! Brief Description | ||
|- | |- | ||
! [[# | ! [[#G20_Set_Units_to_Inches|G20]] | ||
| Yes || | | Yes || Set Units to Inches | ||
|- | |||
! [[#G21_Set_Units_to_Milimeters|G21]] | |||
| Yes || Set Units to Milimeters | |||
|- | |||
! [[#G28_Send_X,_Y_to_Physical_Home|G28]] | |||
| Yes || Send X, Y to Physical Home | |||
|- | |||
! [[#G53_Clear_Offsets|G53]] | |||
| Yes || Clear Offsets | |||
|- | |||
! [[#G54_-_G59_-_Set_Offsets|G54-59]] | |||
| Yes || Set Offsets | |||
|- | |||
! [[#G90_Absolute_Positioning|G90]] | |||
| Yes || Absolute Positioning | |||
|- | |||
! [[#G91_Relatative_Positioning|G91]] | |||
| Yes || Relatative Positioning | |||
|- | |||
! [[#G92_Reset_Coordinate_Offsets|G92]] | |||
| Yes || Reset Coordinates | |||
|- | |||
! [[#G93_Clear_Coordinate_Offsets|G93]] | |||
| Yes || Reset Coordinates | |||
|- | |||
! [[#M6_Declare_Head_Offsets|M6]] | |||
| Yes || Declare Head Offsets | |||
|- | |||
! [[#M660_Assign_Tool_Height_Offset|M660]] | |||
| Yes || Set Tool Offsets | |||
|- | |||
! [[#M702_-_M704_Cloning_Heads|M702-4]] | |||
| Yes || Cloning Heads | |||
|- | |- | ||
|} | |} | ||
Revision as of 17:09, 21 May 2020
3 Movement
| Controlling Movement | ||
|---|---|---|
| Code | Supported | Brief Description |
| G0 | Yes | Rapid Move |
| G1 | Yes | Working Move |
| G2 | Yes | Clockwise Arc |
| G2.1 | Yes | Spiral CW Arc1 |
| G2.2 | Yes | Spiral CW Arc2 |
| G2.3 | Yes | 3-Space CW Spiral Arc |
| G3 | Yes | Counterclockwise Arc |
| [[#G3.1_Spiral_CCW_Arc1|G3.1]] | Yes | Spiral CCW Arc1 |
| G3.2 | Yes | Spiral CCW Arc2 |
| G3.3 | Yes | 3-Space CCW Spiral Arc |
| G4 | Yes | Timed Pause |
| G16 | Yes | Arc in Any Plane |
| G17 | Yes | Arc in XY Plane |
| G18 | Yes | Arc in XZ Plane |
| G19 | Yes | Arc in YZ Plane |
| M0 | Yes | Stop Until Resume |
| M203 | Yes | Set G0 Speed |
4 Temperature
| Controlling Temperature | ||
|---|---|---|
| Code | Supported | Brief Description |
| M104 | Yes | Set Temp (Head) |
| M106 | Yes | Set Cooling / Etc. |
| M107 | Yes | Stop Cooling / Etc. |
| M109 | Yes | Wait for Temp (Head) |
| M116 | No | Pause for All Temps |
| M140 | Yes | Set Temp (Bed) |
| M141 | Yes | Set Temp (Chamber) |
| M190 | Yes | Wait for Temp (Bed) |
| M191 | Yes | Wait for Temp (Chamber) |
5 Flow
| Controlling Material Flow | ||
|---|---|---|
| Code | Supported | Brief Description |
| G10 | No | Absolute E |
| G11 | No | Relative E |
| M82 | Yes | Absolute E-Values |
| M83 | Yes | Relative E-Values |
| M221 | Yes | Set Flow Rate |
| M229 | Yes | Use E Values |
| M721 | Yes | Set Unprime Values |
| M722 | Yes | Set Prime Values |
| M723 | Yes | Set Manual Flow |
| M728 | Yes | Set Motor Current Boost |
| M756 | Yes | Set Height for Flow |
6 Position
| Controlling Positin and Offsets | ||
|---|---|---|
| Code | Supported | Brief Description |
| G20 | Yes | Set Units to Inches |
| G21 | Yes | Set Units to Milimeters |
| G28 | Yes | Send X, Y to Physical Home |
| G53 | Yes | Clear Offsets |
| G54-59 | Yes | Set Offsets |
| G90 | Yes | Absolute Positioning |
| G91 | Yes | Relatative Positioning |
| G92 | Yes | Reset Coordinates |
| G93 | Yes | Reset Coordinates |
| M6 | Yes | Declare Head Offsets |
| M660 | Yes | Set Tool Offsets |
| M702-4 | Yes | Cloning Heads |
7 Lasers
| Controlling Lasers and UV Pens | ||
|---|---|---|
| Code | Supported | Brief Description |
| G0 | Yes | Rapid Move |
8 Spindles
| Controlling Spindles and Lathes | ||
|---|---|---|
| Code | Supported | Brief Description |
| G0 | Yes | Rapid Move |
9 Reporting
| Reporting and Diagnostics | ||
|---|---|---|
| Code | Supported | Brief Description |
| G0 | Yes | Rapid Move |
10 Aux Devices
| Controlling Aux Devices | ||
|---|---|---|
| Code | Supported | Brief Description |
| G0 | Yes | Rapid Move |
11 Other
| Other Commands | ||
|---|---|---|
| Code | Supported | Brief Description |
| G0 | Yes | Rapid Move |