Difference between revisions of "Manuals"

From Hyrel3D
Jump to navigation Jump to search
Line 70: Line 70:
=== Reservoir Heads ===
=== Reservoir Heads ===


Or "Cold Flow" and "Warm Flow", for Biologicals, Cements, Clays, Inks, Gels, Liquids, Pastes, and Resins, in one- or two-part mixtures of: Clay, Metal (and Precious Metal) Clays, HA, PCL, Plasticine, Play-Doh, PLGA, Porcelain, RTV Silicone, Sugru, and more...
Or "Cold Flow" and "Warm Flow" (or Direct Ink Writing / DIW / Robocasting), for Biologicals, Cements, Clays, Inks, Gels, Liquids, Pastes, and Resins, in one- or two-part mixtures of: Clay, Metal (and Precious Metal) Clays, HA, PCL, Plasticine, Play-Doh, PLGA, Porcelain, RTV Silicone, Sugru, and more...


{| border="1" class="wikitable" style="width: 85%;"
{| border="1" class="wikitable" style="width: 85%;"
|+ Hot Flow (Filament) Heads
|+ Hot Flow (Filament) Heads
! style="width: 10%;" | Head
! style="width: 10%;" | Head
! style="width: 10%;" | Min Temp
! style="width: 10%;" | Max Temp
! style="width: 10%;" | Max Temp
! style="width: 10%;" | Max Viscosity
! style="width: 10%;" | Max Viscosity
Line 83: Line 84:
|-
|-
! SDS-1
! SDS-1
| Ambient
| Ambient
| Ambient
| 100,000 Cp
| 100,000 Cp
Line 91: Line 93:
|-
|-
! SDS-5
! SDS-5
| Ambient
| Ambient
| Ambient
| 100,000 Cp
| 100,000 Cp
Line 99: Line 102:
|-
|-
! SDS-10
! SDS-10
| Ambient
| Ambient
| Ambient
| 100,000 Cp
| 100,000 Cp
Line 104: Line 108:
| [http://hyrel3d.net/downloads/Manuals/SDS-10.pdf SDS-10]
| [http://hyrel3d.net/downloads/Manuals/SDS-10.pdf SDS-10]
| [https://www.youtube.com/watch?v=h95IurET7UM SDS Series]
| [https://www.youtube.com/watch?v=h95IurET7UM SDS Series]
| Biologicals, Inks, Gels, Liquids, Pastes, Resins, RTV
|-
! HSD-10-Ardes
| Ambient
| 100°C
| 100,000 Cp
| 10cc
| [pdf]
| [vid]
| Biologicals, Inks, Gels, Liquids, Pastes, Resins, RTV
| Biologicals, Inks, Gels, Liquids, Pastes, Resins, RTV
|-
|-
! SDS-30
! SDS-30
| Ambient
| Ambient
| Ambient
| 100,000 Cp
| 100,000 Cp
Line 112: Line 126:
| [http://hyrel3d.net/downloads/Manuals/SDS-30.pdf SDS-30]
| [http://hyrel3d.net/downloads/Manuals/SDS-30.pdf SDS-30]
| [https://www.youtube.com/watch?v=h95IurET7UM SDS Series]
| [https://www.youtube.com/watch?v=h95IurET7UM SDS Series]
| Biologicals, Inks, Gels, Liquids, Pastes, Resins, RTV
|-
! HSD-30
| Ambient
| 50°C
| 100,000 Cp
| 30cc
| [pdf]
| [vid]
| Biologicals, Inks, Gels, Liquids, Pastes, Resins, RTV
|-
! RSD-30
| 20°C below ambient
| Ambient
| 100,000 Cp
| 30cc
| [pdf]
| [vid]
| Biologicals, Inks, Gels, Liquids, Pastes, Resins, RTV
| Biologicals, Inks, Gels, Liquids, Pastes, Resins, RTV
|-
|-
! SDS-60
! SDS-60
| Ambient
| Ambient
| Ambient
| 100,000 Cp
| 100,000 Cp
Line 122: Line 155:
| Biologicals, Inks, Gels, Liquids, Pastes, Resins, RTV
| Biologicals, Inks, Gels, Liquids, Pastes, Resins, RTV
|-
|-
! SDS-60
! SDS-60XT
| Ambient
| Ambient
| Ambient
| 300,000 Cp
| 300,000 Cp
Line 131: Line 165:
|-
|-
! SDS-150XT
! SDS-150XT
| Ambient
| Ambient
| Ambient
| 300,000 Cp
| 300,000 Cp
Line 139: Line 174:
|-
|-
! EMO (-25)
! EMO (-25)
| Ambient
| Ambient
| Ambient
| 300,000 Cp
| 300,000 Cp
Line 147: Line 183:
|-
|-
! VOL (-25)
! VOL (-25)
| 75°C
| Ambient
| 90°C
| 300,000 Cp
| 300,000 Cp
| 25cc
| 25cc
Line 155: Line 192:
|-
|-
! KR2 (-15)
! KR2 (-15)
| 150°C
| Ambient
| 180°C
| 1,000,000 Cp
| 1,000,000 Cp
| 15cc
| 15cc
Line 163: Line 201:
|-
|-
! TAM (-15)
! TAM (-15)
| 250°C
| Ambient
| 270°C
| 1,000,000 Cp
| 1,000,000 Cp
| 15cc
| 15cc
Line 171: Line 210:
|-
|-
! Clench Valve
! Clench Valve
| Ambient
| n/a
| n/a
| 100,000 Cp
| 100,000 Cp
| varies
| varies
Line 179: Line 219:
|-
|-
! DSD (-50)
! DSD (-50)
| Ambient
| Ambient
| Ambient
| 100,000 Cp
| 100,000 Cp
Line 187: Line 228:
|-
|-
! SMH-2
! SMH-2
| Ambient
| Ambient
| Ambient
| 100,000 Cp
| 100,000 Cp
Line 192: Line 234:
| [http://hyrel3d.net/downloads/Manuals/SMH-2.pdf SMH-2]
| [http://hyrel3d.net/downloads/Manuals/SMH-2.pdf SMH-2]
| [https://www.youtube.com/watch?v=DQj6oLfrbLo SMH-2]
| [https://www.youtube.com/watch?v=DQj6oLfrbLo SMH-2]
| Gels, Liquids, Pastes, Resins, RTV
|-
! DMH-2
| Ambient
| Ambient
| 100,000 Cp
| varies
| [pdf]
| [https://www.youtube.com/watch?v=sVC5W_DdQ9E DMH-2]
| Gels, Liquids, Pastes, Resins, RTV
| Gels, Liquids, Pastes, Resins, RTV
|-
|-

Revision as of 13:27, 26 June 2020

Accessory Manuals and Videos

Filament Heads

Or "Hot Flow" (FFF/FDM), for 1.75 mm and 2.85 mm filaments (+/- .15 mm) including: ABS, BendLay, Flex45, HIPS, LayBrick, LayWood, MoldLay, NinjaFlex, Nylon, PEEK, PEKK, PEG, PET, PETG, PLA, PlastInk Rubber, PC, PP, PPSU, PVA, T-Glase, Wax Filaments, and more...

Hot Flow (Filament) Heads
Head Min Temp Max Temp Manual Video Filaments
MK1-250 Ambient 250°C MK1-250 MK1-250 1.75mm ABS, HIPS, LayBrick, LayWood, Nylon, PEG, PET, PETG, PLA, PC, PVA, T-Glase, Wax
MK1-450 300°C 450°C MK1-450 MK1-450 1.75mm PEEK, PEKK, Ultem
MK2-250 Ambient 250°C [pdf] MK2-250 1.75mm BendLay, Flex45, MoldLay, NinjaFlex, PlastInk Rubber, PP, TPEs, TPUs
HT1-250 Ambient 250°C [pdf] [vid] 1.75mm ABS, HIPS, LayBrick, LayWood, Nylon, PEG, PET, PETG, PLA, PC, PVA, T-Glase, Wax
HT1-450 275°C 450°C [pdf] [vid] 1.75mm PEEK, PEKK, Ultem
HT3-250 Ambient 250°C [pdf] [vid] 2.85mm ABS, HIPS, LayBrick, LayWood, Nylon, PEG, PET, PETG, PLA, PC, PVA, T-Glase, Wax
HT3-450 275°C 450°C [pdf] [vid] 2.85mm PEEK, PEKK, Ultem
Note, HT models are new High Torque versions, driving filament from opposite sides, like the MK1-250XT (Extra Torque)

Reservoir Heads

Or "Cold Flow" and "Warm Flow" (or Direct Ink Writing / DIW / Robocasting), for Biologicals, Cements, Clays, Inks, Gels, Liquids, Pastes, and Resins, in one- or two-part mixtures of: Clay, Metal (and Precious Metal) Clays, HA, PCL, Plasticine, Play-Doh, PLGA, Porcelain, RTV Silicone, Sugru, and more...

Hot Flow (Filament) Heads
Head Min Temp Max Temp Max Viscosity Max Capacity Manual Video Materials
SDS-1 Ambient Ambient 100,000 Cp 1cc SDS-1 SDS Series Biologicals, Inks, Gels, Liquids, Pastes, Resins, RTV
SDS-5 Ambient Ambient 100,000 Cp 5cc SDS-5 SDS Series Biologicals, Inks, Gels, Liquids, Pastes, Resins, RTV
SDS-10 Ambient Ambient 100,000 Cp 10cc SDS-10 SDS Series Biologicals, Inks, Gels, Liquids, Pastes, Resins, RTV
HSD-10-Ardes Ambient 100°C 100,000 Cp 10cc [pdf] [vid] Biologicals, Inks, Gels, Liquids, Pastes, Resins, RTV
SDS-30 Ambient Ambient 100,000 Cp 30cc SDS-30 SDS Series Biologicals, Inks, Gels, Liquids, Pastes, Resins, RTV
HSD-30 Ambient 50°C 100,000 Cp 30cc [pdf] [vid] Biologicals, Inks, Gels, Liquids, Pastes, Resins, RTV
RSD-30 20°C below ambient Ambient 100,000 Cp 30cc [pdf] [vid] Biologicals, Inks, Gels, Liquids, Pastes, Resins, RTV
SDS-60 Ambient Ambient 100,000 Cp 60cc SDS-60 SDS Series Biologicals, Inks, Gels, Liquids, Pastes, Resins, RTV
SDS-60XT Ambient Ambient 300,000 Cp 60cc [pdf] SDS Series Cements, Clays, Pastes
SDS-150XT Ambient Ambient 300,000 Cp 150cc [pdf] SDS Series Cements, Clays, Pastes
EMO (-25) Ambient Ambient 300,000 Cp 25cc EMO EMO Cements, Clays, Plasticine, Porcelain, Play-Doh, Sugru
VOL (-25) Ambient 90°C 300,000 Cp 25cc VOL VOL Clays, Plasticine
KR2 (-15) Ambient 180°C 1,000,000 Cp 15cc KR2 KR2, TAM Cements, Clays, PGL, PLGA, Resins
TAM (-15) Ambient 270°C 1,000,000 Cp 15cc TAM KR2, TAM Cements, Clays, PGL, PLGA, Resins
Clench Valve n/a n/a 100,000 Cp varies CV CV Biologicals, Inks, Gels, Liquids, Pastes, Resins, RTV
DSD (-50) Ambient Ambient 100,000 Cp varies DSD [vid] Gels, Liquids, Pastes, Resins, RTV
SMH-2 Ambient Ambient 100,000 Cp varies SMH-2 SMH-2 Gels, Liquids, Pastes, Resins, RTV
DMH-2 Ambient Ambient 100,000 Cp varies [pdf] DMH-2 Gels, Liquids, Pastes, Resins, RTV

Laser Heads

For surface marking, etching, and cutting appropriate material with our 5W, 808nm or 6W, 450nm diode lasers. Instructions are different for our 40W, 1,000nm CO2 lasers.

Laser Heads
Head Power Wavelength Manual Video Best Materials
LA5-808 5W 808nm LA5 LA5, LA6 Dark, opaque materials
LA6-450 6W 450nm LA6 LA5, LA6 Opaque materials (light or dark)
LI-40 40W 10μm [pdf] LI40 All materials

Spindle Tools

For LIGHT drilling or milling operations.

Spindle Tools
Head Power Max RPM Manual Video Best Materials
ST1 12VDC, 3.5A, 40W 3000 ST1 [vid] Delrin, PEEK, Other Plastics, Machining Wax, Garolite (G10 PCB material)
ST3 48VDC, 8.3A, 400W 12,000 ST3 [vid] Aluminum, Brass, Plastics


Special Build Plates

For special temperature needs

Build Plate
Temp Range Power Size Manual Video Description
HCVB 24VDC, 10A, 240W 100x100mm HCVB [vid] Heated/Chilled Vacuum Bed for Hydra, EHR models

Head Development Kit

For making your own heads

SDK
Temp Range Power Size Manual Video Description
SDK 12VDC, 10A, 120W 35mm wide SDK SDK Head Development Kit for all models
Retrieved from "https://hyrel3d.in/wiki/index.php?title=Manuals&oldid=4883"