Difference between revisions of "Published Papers"

From Hyrel3D
Jump to navigation Jump to search
Line 64: Line 64:
==== Published in 2020 ====
==== Published in 2020 ====


* [https://www.sciencedirect.com/science/article/abs/pii/S0950061820337132 Designing 3D Printable Cementitious Materials with Gel-Forming Polymers] by a team from the Departments of [https://www.tntech.edu/engineering/programs/che/index.php Chemical Engineering] and [https://www.tntech.edu/cas/chemistry/index.php Chemistry] of [https://www.tntech.edu/ Tennessee Technological University] and the [https://www.nist.gov/ National Institute of Standards and Testing (NIST)]
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.0c00839 A Dual Approach in Direct Ink Writing of Thermally Cured Shape Memory Rubber Toughened Epoxy] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Science and Engineering, Case Western Reserve University] and the [https://web.chemcu.org/index.php/en/ Department of Chemistry, Chulalongkorn University, Thailand]
* [https://pubs.acs.org/doi/abs/10.1021/acsapm.0c00839 A Dual Approach in Direct Ink Writing of Thermally Cured Shape Memory Rubber Toughened Epoxy] by a team from the [https://engineering.case.edu/macromolecular-science-and-engineering Department of Macromolecular Science and Engineering, Case Western Reserve University] and the [https://web.chemcu.org/index.php/en/ Department of Chemistry, Chulalongkorn University, Thailand]
* [https://mail.google.com/mail/u/0/#inbox/FMfcgxwKjTPjgzMMXnXxdtpnrwGQwQrS Mechanics of Nozzle Clogging during direct ink writing of Fiber-Reinforced Composites] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate of the US Air Force Research Laboratoy], the [https://udayton.edu/udri/ University of Dayton Research Institute], the [https://mabe.utk.edu/ Mechanical, Aerospace, and Biomedical Engineering Department or the University of Tennessee] and the [https://www.chess.cornell.edu/ Cornell High Energy Synchrotron Source]
* [https://mail.google.com/mail/u/0/#inbox/FMfcgxwKjTPjgzMMXnXxdtpnrwGQwQrS Mechanics of Nozzle Clogging during direct ink writing of Fiber-Reinforced Composites] by a team from the [https://www.afrl.af.mil/RX/ Materials and Manufacturing Directorate of the US Air Force Research Laboratoy], the [https://udayton.edu/udri/ University of Dayton Research Institute], the [https://mabe.utk.edu/ Mechanical, Aerospace, and Biomedical Engineering Department or the University of Tennessee] and the [https://www.chess.cornell.edu/ Cornell High Energy Synchrotron Source]

Revision as of 21:33, 14 December 2020

Below is a list of published works citing Hyrel equipment.

210 documents as of 24 November 2020.

Non-Traditional Manufacturing

Including Antennas, Sensors, Inductors, and Circuits; Combined Manufacturing Techniques; and Electro-Spinning or Electro-Melt-Spinning

Published in 2020

Published in 2019

Published in 2018

Published in 2017

Published in 2016

Published in 2015

Unheated or Chilled Reservoir Printing

Published in 2020

Published in 2019

Published in 2018

Published in 2017

Published in 2016

Published in 2015

Published in 2014

Heated Reservoir Printing

Published in 2020

Published in 2019

Published in 2018

Published in 2017

Filament Printing

Published in 2020

Published in 2019

Published in 2018

Published in 2017

Published in 2016