Difference between revisions of "Published Papers"

From Hyrel3D
Jump to navigation Jump to search
Line 194: Line 194:
==== Published in 2020 ====
==== Published in 2020 ====


* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202002929 Controlled Assembly of Liquid Metal Inclusions as a General Approach for Multifunctional Composites] by a team from [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/adma.202002929 Controlled Assembly of Liquid Metal Inclusions as a General Approach for Multifunctional Composites] by a team from the [https://www.meche.engineering.cmu.edu Department of Mechanical Engineering, Carnegie Mellon University]
* [https://www.sciencedirect.com/science/article/pii/S2666821120300247#! Syngas to Higher Alcohols Synthesis over 3D Printed KMoCo/ZSM5 Monolith] by a team from the [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology (AIBN) of The University of Queensland]
* [https://www.sciencedirect.com/science/article/pii/S2666821120300247#! Syngas to Higher Alcohols Synthesis over 3D Printed KMoCo/ZSM5 Monolith] by a team from the [https://aibn.uq.edu.au/ Australian Institute for Bioengineering and Nanotechnology (AIBN) of The University of Queensland]
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.0c00572 Extrusion 3D Printing of Porous Silicone Architectures for Engineering Human Cardiomyocyte-Infused Patches Mimicking Adult Heart Stiffness] by a team from the [https://mme.fiu.edu/ Department of Mechanical and Materials Engineering of Florida International University]
* [https://pubs.acs.org/doi/abs/10.1021/acsabm.0c00572 Extrusion 3D Printing of Porous Silicone Architectures for Engineering Human Cardiomyocyte-Infused Patches Mimicking Adult Heart Stiffness] by a team from the [https://mme.fiu.edu/ Department of Mechanical and Materials Engineering of Florida International University]

Revision as of 14:20, 18 December 2020

Below is a list of published works citing Hyrel equipment.

211 documents as of 14 December 2020.

Non-Traditional Manufacturing

Including Antennas, Sensors, Inductors, and Circuits; Combined Manufacturing Techniques; and Electro-Spinning or Electro-Melt-Spinning

Published in 2020

Published in 2019

Published in 2018

Published in 2017

Published in 2016

Published in 2015

Unheated or Chilled Reservoir Printing

Published in 2020

Published in 2019

Published in 2018

Published in 2017

Published in 2016

Published in 2015

Published in 2014

Heated Reservoir Printing

Published in 2020

Published in 2019

Published in 2018

Published in 2017

Filament Printing

Published in 2020

Published in 2019

Published in 2018

Published in 2017

Published in 2016