Difference between revisions of "Published Papers"

From Hyrel3D
Jump to navigation Jump to search
Line 74: Line 74:
==== Published in 2021 ====
==== Published in 2021 ====


* [https://www.sciencedirect.com/science/article/abs/pii/S2214860421001287 Computational Study of Extrusion Bioprinting with Jammed Gelatin Microgel-Based Composite Ink] by a team from the [https://mae.ufl.edu/ Department of Mechanical and Aerospace Engineering, University of Florida] and the [http://me.zju.edu.cn/meenglish/15428/list.htm School of Mechanical Engineering, Zhejiang University]
* [https://aip.scitation.org/doi/abs/10.1063/5.0047183 Recent Advances in 3D Printed Wound Dressings] by a team from the [https://www.ui.ac.id/ University of Indonesia]
* [https://aip.scitation.org/doi/abs/10.1063/5.0047183 Recent Advances in 3D Printed Wound Dressings] by a team from the [https://www.ui.ac.id/ University of Indonesia]
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202001115 Multifunctional Reactive Nanocomposites via Direct Ink Writing] by a team from [https://www.jhu.edu/ Johns Hopkins University]'s Materials Science and Engineering Department and Hopkins Extreme Materials Institute, as well as [https://www.draper.com/ The Charles Stark Draper Laboratory, Inc.]
* [https://onlinelibrary.wiley.com/doi/abs/10.1002/admt.202001115 Multifunctional Reactive Nanocomposites via Direct Ink Writing] by a team from [https://www.jhu.edu/ Johns Hopkins University]'s Materials Science and Engineering Department and Hopkins Extreme Materials Institute, as well as [https://www.draper.com/ The Charles Stark Draper Laboratory, Inc.]

Revision as of 19:43, 31 March 2021

Below is a list of published works citing Hyrel equipment.

233 documents as of 31 March 2021.

Non-Traditional Manufacturing

Including Antennas, Sensors, Inductors, and Circuits; Combined Manufacturing Techniques; Electro-Spinning or Electro-Melt-Spinning; also printing with Embedded Fibers

Published in 2021

Published in 2020

Published in 2019

Published in 2018

Published in 2017

Published in 2016

Published in 2015

Unheated or Chilled Reservoir Printing (DIW)

Also known as DIW, Direct Ink Writing.

Published in 2021

Published in 2020

Published in 2019

Published in 2018

Published in 2017

Published in 2016

Published in 2015

Published in 2014

Heated Reservoir Printing (MEW)

Also known as MEW, or Melt Electro-Writing.

Published in 2020

Published in 2019

Published in 2018

Published in 2017

Filament Printing (FFF/FDM)

Also known as FFF or FDM, Fused Filament Fabrication or Fused Deposition Modeling.

Published in 2021

Published in 2020

Published in 2019

Published in 2018

Published in 2017

Published in 2016