Difference between revisions of "GCode Header"

From Hyrel3D
Jump to navigation Jump to search
(Created page with "Category:HowTo {| align="right" | __TOC__ |} At Hyrel, we believe that you must start with a good GCode header to get a good print. Below are explanations of our standar...")
 
Line 7: Line 7:
At Hyrel, we believe that you must start with a good GCode header to get a good print. Below are explanations of our standard header files. These can be configured in Slic3r under <code>'''Printer Settings > Custom G-code > Start G-code'''</code>
At Hyrel, we believe that you must start with a good GCode header to get a good print. Below are explanations of our standard header files. These can be configured in Slic3r under <code>'''Printer Settings > Custom G-code > Start G-code'''</code>


BLACK entries are for every machine
* '''BLACK''' entries are for every machine
GREEN entries are recommended, but must be manually entered
* <span style="color: forestgreen;">'''GREEN'''</span> entries are recommended, but must be manually entered
RED entries are for the EHR only
* <span style="color: firebrick;">'''RED'''</span> entries are for the EHR only
BLUE entries are for the 16A only
* <span style="color: navy;">'''BLUE'''</span> entries are for the 16A only




(this page is in progress, 20 Apr 2021)
(this page is in progress, 20 Apr 2021)

Revision as of 15:48, 20 April 2021


At Hyrel, we believe that you must start with a good GCode header to get a good print. Below are explanations of our standard header files. These can be configured in Slic3r under Printer Settings > Custom G-code > Start G-code

  • BLACK entries are for every machine
  • GREEN entries are recommended, but must be manually entered
  • RED entries are for the EHR only
  • BLUE entries are for the 16A only


(this page is in progress, 20 Apr 2021)