Difference between revisions of "Published Papers"

From Hyrel3D
Jump to navigation Jump to search
Line 13: Line 13:
==== Published in 2021 ====
==== Published in 2021 ====


* [http://hyrel3d.net/papers/4D_Printing_with_Bio-based_Polymers_for_Adaptive_Wearable_Devices 4D Printing with Bio-based Polymers for Adaptive Wearable Devices], submitted in fulfillment of the requirements for the degree of Master of Design Innovation
* [http://hyrel3d.net/papers/Automated_Fiber_Embedding_for_Soft_Mechatronic_Components.pdf Automated Fiber Embedding for Soft Mechatronic Components]  by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] of the [http://www.sutd.edu.sg Singapore University of Technology and Design]  
* [http://hyrel3d.net/papers/Automated_Fiber_Embedding_for_Soft_Mechatronic_Components.pdf Automated Fiber Embedding for Soft Mechatronic Components]  by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] of the [http://www.sutd.edu.sg Singapore University of Technology and Design]  
* [https://www.sciencedirect.com/science/article/abs/pii/S2352940721000445 Silicone/Epoxy Hybrid Resins with Tunable Mechanical and Interfacial Properties for Additive Manufacture of Soft Robots] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] and the [https://epd.sutd.edu.sg/ Engineering Product Development Pillar] of the [http://www.sutd.edu.sg Singapore University of Technology and Design]
* [https://www.sciencedirect.com/science/article/abs/pii/S2352940721000445 Silicone/Epoxy Hybrid Resins with Tunable Mechanical and Interfacial Properties for Additive Manufacture of Soft Robots] by a team from the [https://dmand.sutd.edu.sg/Digital Manufacturing and Design Centre] and the [https://epd.sutd.edu.sg/ Engineering Product Development Pillar] of the [http://www.sutd.edu.sg Singapore University of Technology and Design]

Revision as of 19:55, 10 May 2021

Below is a list of published works citing Hyrel equipment.

242 documents as of 3 May 2021.

Non-Traditional Manufacturing

Including Antennas, Sensors, Inductors, and Circuits; Combined Manufacturing Techniques; Electro-Spinning or Electro-Melt-Spinning; also printing with Embedded Fibers

Published in 2021

Published in 2020

Published in 2019

Published in 2018

Published in 2017

Published in 2016

Published in 2015

Unheated or Chilled Reservoir Printing (DIW)

Also known as Robocasting or DIW, Direct Ink Writing.

Published in 2021

Published in 2020

Published in 2019

Published in 2018

Published in 2017

Published in 2016

Published in 2015

Published in 2014

Heated Reservoir Printing (MEW)

Also known as MEW, or Melt Electro-Writing.

Published in 2021

Published in 2020

Published in 2019

Published in 2018

Published in 2017

Filament Printing (FFF/FDM)

Also known as FFF or FDM, Fused Filament Fabrication or Fused Deposition Modeling.

Published in 2021

Published in 2020

Published in 2019

Published in 2018

Published in 2017

Published in 2016