Difference between revisions of "Published Papers"

From Hyrel3D
Jump to navigation Jump to search
Line 76: Line 76:
==== Published in 2021 ====
==== Published in 2021 ====


*[https://pubs.acs.org/doi/abs/10.1021/acsami.1c05025 Liquid Crystal-Mediated 3D Printing Process to Fabricate Nano-Ordered Layered Structures] by a team from [https://www.unsw.edu.au/ University of New South Wales], [https://www.uni-hannover.de/en/ Leibniz Universität, Hannover], [https://www.monash.edu/ Monash University], [https://www.rmit.edu.au/ RMIT University], [https://www.shinshu-u.ac.jp/english/ Shinshu University, Tokida], and [http://www.crpp-bordeaux.cnrs.fr/?lang=en Centre de Recherche Paul Pascal−CNRS, University of Bordeaux]
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100211 3D Printing of Flexible Composites via Magnetophoresis: Toward Medical Application Based on Low-Frequency Induction Heating Effect] by a team from [https://www.insa-lyon.fr/en/ University of Lyon, INSA-Lyon, France]
*[https://onlinelibrary.wiley.com/doi/abs/10.1002/mame.202100211 3D Printing of Flexible Composites via Magnetophoresis: Toward Medical Application Based on Low-Frequency Induction Heating Effect] by a team from [https://www.insa-lyon.fr/en/ University of Lyon, INSA-Lyon, France]
*[https://www.sciencedirect.com/science/article/abs/pii/S0969806X21002668 Flexible 3D Printed Silicones for Gamma and Neutron Radiation Shielding] by a team from [https://www.lanl.gov Los Alamos National Laboratory], [https://kcnsc.doe.gov US Department of Energy's Kansas City National Security Campus], and [https://eng.kist.re.kr/kist_eng/main/ Korea Institute of Science and Technology]
*[https://www.sciencedirect.com/science/article/abs/pii/S0969806X21002668 Flexible 3D Printed Silicones for Gamma and Neutron Radiation Shielding] by a team from [https://www.lanl.gov Los Alamos National Laboratory], [https://kcnsc.doe.gov US Department of Energy's Kansas City National Security Campus], and [https://eng.kist.re.kr/kist_eng/main/ Korea Institute of Science and Technology]

Revision as of 11:25, 22 June 2021

Below is a list of published works citing Hyrel equipment.

253 documents as of 22 June 2021.

Non-Traditional Manufacturing

Including Antennas, Sensors, Inductors, and Circuits; Combined Manufacturing Techniques; Electro-Spinning or Electro-Melt-Spinning; also printing with Embedded Fibers

Published in 2021

Published in 2020

Published in 2019

Published in 2018

Published in 2017

Published in 2016

Published in 2015

Unheated or Chilled Reservoir Printing (DIW)

Also known as Robocasting or DIW, Direct Ink Writing.

Published in 2021

Published in 2020

Published in 2019

Published in 2018

Published in 2017

Published in 2016

Published in 2015

Published in 2014

Heated Reservoir Printing (MEW)

Also known as MEW, or Melt Electro-Writing.

Published in 2021

Published in 2020

Published in 2019

Published in 2018

Published in 2017

Filament Printing (FFF/FDM)

Also known as FFF or FDM, Fused Filament Fabrication or Fused Deposition Modeling.

Published in 2021

Published in 2020

Published in 2019

Published in 2018

Published in 2017

Published in 2016