Difference between revisions of "Materials"
Jump to navigation
Jump to search
Line 2: | Line 2: | ||
= Materials Printable on Hyrel Machines = | = Materials Printable on Hyrel Machines = | ||
The following is a list of materials with which the Hyrel machines can print: | The following is a list of materials with which the Hyrel machines can print; you can sort by any column: | ||
{| border="1" class="wikitable" | {| border="1" class="wikitable sortable" | ||
|+ Material Reference Chart | |+ Material Reference Chart | ||
! Material | ! Material |
Revision as of 13:02, 28 April 2015
Materials Printable on Hyrel Machines
The following is a list of materials with which the Hyrel machines can print; you can sort by any column:
Material | Extruder | HotHead (°C) | Fan Speed | HotBed (°C) | Steps / nl | Verified? |
---|---|---|---|---|---|---|
ABS | MK-1 | ~225 | 30% | 60 | 0.085 | yes |
PLA | MK-1 | ~200 | 30% | 60 | 0.085 | yes |
PlastInk Rubber | MK-1 | ~225 | 30% | 60 | 0.085 | yes |
NinjaFlex | MK-1 | ~225 | 30% | 60 | 0.085 | yes |
Nylon | MK-1 | ~225 | 30% | 60 | 0.085 | yes |
T-Glaze | MK-1 | ~225 | 30% | 60 | 0.085 | yes |
BendLay | MK-1 | ~225 | 30% | 60 | 0.085 | no |
LayBrick | MK-1 | ~225 | 30% | 60 | 0.085 | no |
LayWoo-d3 | MK-1 | ~225 | 30% | 60 | 0.085 | yes |
PET | MK-1 | ~225 | 30% | 60 | 0.085 | no |
PVA | MK-1 | ~225 | 30% | 60 | 0.085 | no |
Clay | EMO-25 | n/a | n/a | n/a | *varies | yes |
Metal Clay, Precious Metal Clay |
EMO-25 | n/a | n/a | n/a | *varies | yes |
Porcelain | EMO-25 | n/a | n/a | n/a | *varies | yes |
Plasticine | EMO-25 | n/a | n/a | n/a | *varies | yes |
Plah-Doh | EMO-25 | n/a | n/a | n/a | *varies | yes |
Sculpey | EMO-25 | n/a | n/a | n/a | *varies | yes |
Sugru | EMO-25 | n/a | n/a | n/a | *varies | yes |
RTV Silicone | EMO-25 | n/a | n/a | n/a | *varies | yes |