Difference between revisions of "Materials"
Jump to navigation
Jump to search
| Line 15: | Line 15: | ||
|- | |- | ||
! [[ABS]] | ! [[ABS]] | ||
| [[ | | [[MK1-250]] || ~225 || 30% || 60 || 0.78 || yes | ||
|- | |- | ||
! [[PLA]] | ! [[PLA]] | ||
| [[ | | [[MK1-250]] || ~200 || 30% || 60 || 0.78 || yes | ||
|- | |- | ||
! [[PlastInk Rubber]] | ! [[PlastInk Rubber]] | ||
| [[ | | [[MK1-250]] || ~225 || 30% || 60 || 0.78 || yes | ||
|- | |- | ||
! [[NinjaFlex]] | ! [[NinjaFlex]] | ||
| [[ | | [[MK1-250]] || ~225 || 30% || 60 || 0.78 || yes | ||
|- | |- | ||
! [[Nylon]] | ! [[Nylon]] | ||
| [[ | | [[MK1-250]] || ~225 || 30% || 60 || 0.78 || yes | ||
|- | |- | ||
! [[T-Glaze]] | ! [[T-Glaze]] | ||
| [[ | | [[MK1-250]] || ~225 || 30% || 60 || 0.78 || yes | ||
|- | |- | ||
! [[BendLay]] | ! [[BendLay]] | ||
| [[ | | [[MK1-250]] || ~225 || 30% || 60 || 0.78 || no | ||
|- | |- | ||
! [[LayBrick]] | ! [[LayBrick]] | ||
| [[ | | [[MK1-250]] || ~225 || 30% || 60 || 0.78 || no | ||
|- | |- | ||
! [[LayWoo-d3]] | ! [[LayWoo-d3]] | ||
| [[ | | [[MK1-250]] || ~225 || 30% || 60 || 0.78 || yes | ||
|- | |- | ||
! [[PET]] | ! [[PET]] | ||
| [[ | | [[MK1-250]] || ~225 || 30% || 60 || 0.78 || no | ||
|- | |- | ||
! [[PVA]] | ! [[PVA]] | ||
| [[ | | [[MK1-250]] || ~225 || 30% || 60 || 0.78 || no | ||
|- | |- | ||
! [[Clay]] | ! [[Clay]] | ||
Revision as of 13:03, 28 April 2015
Materials Printable on Hyrel Machines
The following is a list of materials with which the Hyrel machines can print; you can sort by any column:
| Material | Extruder | HotHead (°C) | Fan Speed | HotBed (°C) | Steps / nl | Verified? |
|---|---|---|---|---|---|---|
| ABS | MK1-250 | ~225 | 30% | 60 | 0.78 | yes |
| PLA | MK1-250 | ~200 | 30% | 60 | 0.78 | yes |
| PlastInk Rubber | MK1-250 | ~225 | 30% | 60 | 0.78 | yes |
| NinjaFlex | MK1-250 | ~225 | 30% | 60 | 0.78 | yes |
| Nylon | MK1-250 | ~225 | 30% | 60 | 0.78 | yes |
| T-Glaze | MK1-250 | ~225 | 30% | 60 | 0.78 | yes |
| BendLay | MK1-250 | ~225 | 30% | 60 | 0.78 | no |
| LayBrick | MK1-250 | ~225 | 30% | 60 | 0.78 | no |
| LayWoo-d3 | MK1-250 | ~225 | 30% | 60 | 0.78 | yes |
| PET | MK1-250 | ~225 | 30% | 60 | 0.78 | no |
| PVA | MK1-250 | ~225 | 30% | 60 | 0.78 | no |
| Clay | EMO-25 | n/a | n/a | n/a | *varies | yes |
| Metal Clay, Precious Metal Clay |
EMO-25 | n/a | n/a | n/a | *varies | yes |
| Porcelain | EMO-25 | n/a | n/a | n/a | *varies | yes |
| Plasticine | EMO-25 | n/a | n/a | n/a | *varies | yes |
| Plah-Doh | EMO-25 | n/a | n/a | n/a | *varies | yes |
| Sculpey | EMO-25 | n/a | n/a | n/a | *varies | yes |
| Sugru | EMO-25 | n/a | n/a | n/a | *varies | yes |
| RTV Silicone | EMO-25 | n/a | n/a | n/a | *varies | yes |