Difference between revisions of "Materials"

From Hyrel3D
Jump to navigation Jump to search
Line 11: Line 11:
! Material
! Material
! Extruder
! Extruder
! HotHead (°C)
! Head (°C)
! Fan Speed*
! Fan Speed*
! HotBed (°C)
! HotBed (°C)
! Steps / nl
! Speed (mm/min)
! Verified?
|-
|-
! [http://en.wikipedia.org/wiki/Acrylonitrile_butadiene_styrene ABS]
! [http://en.wikipedia.org/wiki/Acrylonitrile_butadiene_styrene ABS]
| [[MK1-250]] || 240/235 || 35 (=89%) || 80 || 0.78 || yes
| [[MK1-250]] || 240/235 || 10 (=25.5%) || 80 || 2000
|-
|-
! [http://en.wikipedia.org/wiki/Polylactic_acid PLA]
! [http://en.wikipedia.org/wiki/Polylactic_acid PLA]
| [[MK1-250]] || 185/180 || 35 (=89%) || 40 || 0.78 || yes
| [[MK1-250]] || 185/180 || 10 (=25.5%) || 40 || 2000
|-
|-
! [http://www.plastink.com/en/product-category/rubber-o-175-mm-500-g/ PlastInk Rubber]
! [http://www.plastink.com/en/product-category/rubber-o-175-mm-500-g/ PlastInk Rubber]
| [[MK1-250]] || 225 || 35 (=89%) || 50 || 0.78 || yes
| [[MK1-250]] || 225 || 10 (=25.5%) || 50 || 2000
|-
|-
! [http://www.ninjaflex3d.com/products/ninjaflex-filaments/ NinjaFlex]
! [http://www.ninjaflex3d.com/products/ninjaflex-filaments/ NinjaFlex]
| [[MK1-250]] || 225 || 35 (=89%) || 50 || 0.78 || yes
| [[MK1-250]] || 225 || 10 (=25.5%) || 50 || 2000
|-
|-
! [http://en.wikipedia.org/wiki/Nylon Nylon]
! [http://en.wikipedia.org/wiki/Nylon Nylon]
| [[MK1-250]] || 225 || 35 (=89%) || 80 || 0.78 || yes
| [[MK1-250]] || 225 || 10 (=25.5%) || 80 || 2000
|-
|-
! [http://taulman3d.com/t-glase-features.html T-Glase]
! [http://taulman3d.com/t-glase-features.html T-Glase]
| [[MK1-250]] || 225 || 35 (=89%) || 80 || 0.78 || yes
| [[MK1-250]] || 225 || 10 (=25.5%) || 80 || 2000
|-
|-
! [http://www.orbi-tech.de/shop/3D-Filamente/BendLay:::72_121.html BendLay]
! [http://www.orbi-tech.de/shop/3D-Filamente/BendLay:::72_121.html BendLay]
| [[MK1-250]] || 225 || 35 (=89%) || 50 || 0.78 || no
| [[MK1-250]] || 225 || 10 (=25.5%) || 50 || 500
|-
|-
! [http://www.orbi-tech.de/shop/3D-Filaments/LayBrick:::72_75.html?MODsid=95020b9aa2c5bc5db17abfa692228995 LayBrick]
! [http://www.orbi-tech.de/shop/3D-Filaments/LayBrick:::72_75.html?MODsid=95020b9aa2c5bc5db17abfa692228995 LayBrick]
| [[MK1-250]] || 225 || 35 (=89%) || 80 || 0.78 || no
| [[MK1-250]] || 225 || 10 (=25.5%) || 80 || 500
|-
|-
! [http://www.orbi-tech.de/shop/3D-Filaments/LayWoo-d3:::72_76.html LayWoo-d3]
! [http://www.orbi-tech.de/shop/3D-Filaments/LayWoo-d3:::72_76.html LayWoo-d3]
| [[MK1-250]] || 220/205 || 35 (=89%) || 80 || 0.78 || yes
| [[MK1-250]] || 220/205 || 10 (=25.5%) || 80 || 2000
|-
|-
! [http://en.wikipedia.org/wiki/Polyethylene_terephthalate PET]
! [http://en.wikipedia.org/wiki/Polyethylene_terephthalate PET]
| [[MK1-250]] || 210 || 35 (=89%) || 40 || 0.78 || no
| [[MK1-250]] || 210 || 10 (=25.5%) || 40 || 500
|-
|-
! [http://en.wikipedia.org/wiki/Polyvinyl_alcohol PVA]
! [http://en.wikipedia.org/wiki/Polyvinyl_alcohol PVA]
| [[MK1-250]] || 210 || 35 (=89%) || 40 || 0.78 || no
| [[MK1-250]] || 210 || 10 (=25.5%) || 40 || 500
|-
|-
! [http://en.wikipedia.org/wiki/Clay Clay]
! [http://en.wikipedia.org/wiki/Clay Clay]
| [[EMO-25]], 19:1 <br/> [[EMO-25]], 27:1 || n/a || n/a || n/a || 1.75 <br/> 2.30 || yes
| [[EMO-25]] || n/a || n/a || n/a || 2000
|-
|-
! [http://en.wikipedia.org/wiki/Metal_clay Metal Clay], <br/> [http://en.wikipedia.org/wiki/Metal_clay#Precious_Metal_Clay_.28PMC.29 Precious Metal Clay]
! [http://en.wikipedia.org/wiki/Metal_clay Metal Clay], <br/> [http://en.wikipedia.org/wiki/Metal_clay#Precious_Metal_Clay_.28PMC.29 Precious Metal Clay]
| [[EMO-25]], 19:1 <br/> [[EMO-25]], 27:1 || n/a || n/a || n/a || 1.75 <br/> 2.30 || yes
| [[EMO-25]] || n/a || n/a || n/a || 2000
|-
|-
! [http://en.wikipedia.org/wiki/Polypropylene Polypropylene]
! [http://en.wikipedia.org/wiki/Polypropylene Polypropylene]
| [[MK1-250]] || 235 || 35 (=89%) || 80 || 0.78 || yes
| [[MK1-250]] || 235 || 10 (=25.5%) || 80 || 2000
|-
|-
! [http://en.wikipedia.org/wiki/Polycarbonate Polycarbonate]
! [http://en.wikipedia.org/wiki/Polycarbonate Polycarbonate]
| [[MK1-350]] || 350 || 35 (=89%) || 80 || 0.78 || yes
| [[MK1-350]] || 350 || 10 (=25.5%) || 80 || 2000
|-
|-
! [http://en.wikipedia.org/wiki/Porcelain Porcelain]
! [http://en.wikipedia.org/wiki/Porcelain Porcelain]
| [[EMO-25]], 19:1 <br/> [[EMO-25]], 27:1 || n/a || n/a || n/a || 1.75 <br/> 2.30 || yes
| [[EMO-25]] || n/a || n/a || n/a || 2000
|-
|-
! [http://en.wikipedia.org/wiki/Plasticine Plasticine]
! [http://en.wikipedia.org/wiki/Plasticine Plasticine]
| [[EMO-25]], 19:1 <br/> [[EMO-25]], 27:1 || n/a || n/a || n/a || 1.75 <br/> 2.30 || yes
| [[EMO-25]] || n/a || n/a || n/a || 2000
|-
|-
! [http://www.hasbro.com/playdoh/en_AU/ Play-Doh]
! [http://www.hasbro.com/playdoh/en_AU/ Play-Doh]
| [[EMO-25]], 19:1 <br/> [[EMO-25]], 27:1 || n/a || n/a || n/a || 1.75 <br/> 2.30 || yes
| [[EMO-25]] || n/a || n/a || n/a || 2000
|-
|-
! [http://www.sculpey.com/ Sculpey]
! [http://www.sculpey.com/ Sculpey]
| [[EMO-25]], 19:1 <br/> [[EMO-25]], 27:1 ||| n/a || n/a || n/a || 1.75 <br/> 2.30 || yes
| [[EMO-25]] ||| n/a || n/a || n/a || 2000
|-
|-
! [https://sugru.com/ Sugru]
! [https://sugru.com/ Sugru]
| [[EMO-25]], 19:1 <br/> [[EMO-25]], 27:1 || n/a || n/a || n/a || 1.75 <br/> 2.30 || yes
| [[EMO-25]] || n/a || n/a || n/a || 2000
|-
|-
! [http://en.wikipedia.org/wiki/RTV_silicone RTV Silicone]
! [http://en.wikipedia.org/wiki/RTV_silicone RTV Silicone]
| [[EMO-25]], 19:1 <br/> [[EMO-25]], 27:1 ||| n/a || n/a || n/a || 1.75 <br/> 2.30 || yes
| [[EMO-25]] ||| n/a || n/a || n/a || 2000
|-
|-
|}
|}


*Note: Be sure the fan directs air to the material and not directly at the nozzle.  
*Note: Be sure the fan directs air to the material and not directly at the nozzle.  
*Note: In Repetrel 1.85, you should slice with a fan value between 0 and 39, which will result in a fan speed between 0 and 99, since we have our fans run between 0 and 100, not between 0 and 255 like other printers.
*Note: In Slic3r, you should slice with a fan value between 0 and 39, which will result in a fan speed between 0 and 99, since we have our fans run between 0 and 100, not between 0 and 255 like other printers. Also note that we leave the fan OFF for the first five layers.

Revision as of 22:13, 1 February 2018


A huge variety of materials can be printed with various extruders on the Hyrel machines. Below are the recipes we have so far...

Materials Printable on Hyrel Machines

The following is a list of materials with which the Hyrel machines can print; you can sort by any column:

Material Reference Chart
Material Extruder Head (°C) Fan Speed* HotBed (°C) Speed (mm/min)
ABS MK1-250 240/235 10 (=25.5%) 80 2000
PLA MK1-250 185/180 10 (=25.5%) 40 2000
PlastInk Rubber MK1-250 225 10 (=25.5%) 50 2000
NinjaFlex MK1-250 225 10 (=25.5%) 50 2000
Nylon MK1-250 225 10 (=25.5%) 80 2000
T-Glase MK1-250 225 10 (=25.5%) 80 2000
BendLay MK1-250 225 10 (=25.5%) 50 500
LayBrick MK1-250 225 10 (=25.5%) 80 500
LayWoo-d3 MK1-250 220/205 10 (=25.5%) 80 2000
PET MK1-250 210 10 (=25.5%) 40 500
PVA MK1-250 210 10 (=25.5%) 40 500
Clay EMO-25 n/a n/a n/a 2000
Metal Clay,
Precious Metal Clay
EMO-25 n/a n/a n/a 2000
Polypropylene MK1-250 235 10 (=25.5%) 80 2000
Polycarbonate MK1-350 350 10 (=25.5%) 80 2000
Porcelain EMO-25 n/a n/a n/a 2000
Plasticine EMO-25 n/a n/a n/a 2000
Play-Doh EMO-25 n/a n/a n/a 2000
Sculpey EMO-25 n/a n/a n/a 2000
Sugru EMO-25 n/a n/a n/a 2000
RTV Silicone EMO-25 n/a n/a n/a 2000
  • Note: Be sure the fan directs air to the material and not directly at the nozzle.
  • Note: In Slic3r, you should slice with a fan value between 0 and 39, which will result in a fan speed between 0 and 99, since we have our fans run between 0 and 100, not between 0 and 255 like other printers. Also note that we leave the fan OFF for the first five layers.