Firmware

Firmware

Versions 2.415 and 33/35, * with Spindle Tool firmware, as of 10 May 2017

New software will often require new firmware. New software packages always come with the latest firmware at the time the software was released; however, sometimes newer firmware is available.

There are two families of firmware; one for the heads, or STM-103 boards, and another for the motion controllers, or STM-427 / STM-407 boards.

Print Head / Hot Bed Firmware

For the STM-103 Boards.

Video instructions for flashing the 103 (HH/HB) Controllers: https://youtu.be/yM8QMZBTb4o

Firmware Listing

Filament Heads	Firmware
MK1-250	_FIL_250_PLAT_1A.hex
MK1-250 with red RTDs (from 2013, 2014)	_FIL_250_RED_235A.hex
MK2-250	_FIL_250_PLAT_1A.hex
MK1-450	_FIL_450_45A.hex
Emulsion-Type Heads	Firmware
All Emulsion-type Heads (including mixing heads)	_TUBES_35K.hex
With COD or Clench Valve tied to Printing Moves Only	_TUBES_49V.hex
Laser Heads	Firmware
Diode Lasers on Repetrel v2.x	_LASER_R2_234.hex
Diode and CO2 Lasers on Repetrel v3.x	_LASER_R3_PWM_6L.hex
Spindle Tools	Firmware
Spindle Tools (1- and 3- Phase)	_DrillMill_2.3.hex
Inkjet Heads	Firmware
Inkjet Headss (Heat- and Piezo- based)	_INKJET_6E.hex

Motion Controller Firmware

For the STM-429 and STM-407 Boards

Video instructions for flashing the 103 (HH/HB) Controllers: https://youtu.be/yM8QMZBTb4o

Firmware Listing

Printer Model	Repetrel Version	Firmware
All Hydra Models (3-, 4- and 5- axis)	Repetrel 3.07x	Hydra 3.07x
Engine, High Resolution	Repetrel 3.07x	Hydra 3.07x
System 30M (and earlier Systems)	Repetrel 3.07x	Hyrel 3.07x
	Repetrel 2.865	2.414
Engine, Standard Resolution	Repetrel 3.07x	Hyrel 3.07x
	Repetrel 2.865	Version 2.414