Videos

There be videos here.

Please also see the Instructions page.

Product Features

• Selecting the Right Printer: https://www.youtube.com/watch?v=vc9gBZtUL7c
• Intro to Hyrel 3D Possibilities: https://youtu.be/4oxCqR_DVNQ
• Printing four parts at once (ABS): https://www.youtube.com/watch?v=xQFacnpzmv0
• Printing three parts at once (ABS), with the "Clone Head" feature: https://youtu.be/cuRcIE-Jbyc
• Printing two parts at once (plasticine): https://www.youtube.com/watch?v=P6aMBQSZPgg
• Introducing the System 30: https://www.youtube.com/watch?v=c9HvQ3SepoM
• Sped-up video of the Gear Vase print: https://www.youtube.com/watch?v=DaIrESgjNSA
• Introducing the hot-swappable Print Heads: https://www.youtube.com/watch?v=XNwv7Dw_Zwg
• Introducing the Developer's Kit (SDK): https://www.youtube.com/watch?v=-VHxf182fIs
• Introducing the Shark5 Laser: https://www.youtube.com/watch?v=0lpa4nENtyQ
• Introducing the Luer Tip Kit: https://www.youtube.com/watch?v=mPYPWjnDGho
• Introducing Hyrel 2.4 and Slicing 2 stls for 2 heads: https://www.youtube.com/watch?v=VMyS3h4qiSA
• Introductin Hyrel 2.4 and Inserting new Temperature and Fan Speed gcode: https://www.youtube.com/watch?v=4REXwbuTvzQ

Print Material

• Printing in Sugru (Rubber): https://www.youtube.com/watch?v=nuii5rP53Js
• Printing in Air-dry Modeling Clay: https://www.youtube.com/watch?v=trdz4YDbdsw
• Printing in Plasticine: https://www.youtube.com/watch?v=cw8XiW46G0k
• Printing in Play-Doh: https://www.youtube.com/watch?v=dihvAQR7LQg
• Testing the Shark5 Laser: https://www.youtube.com/watch?v=yEePz8_0ttc
• Part Printed in NinjaFlex: https://www.youtube.com/watch?v=KJ76lRfpOJ4
• First Clay test print: https://www.youtube.com/watch?v=0gv71RAtdwg

Instructions

Here are some basic instructions; a more structured presentation can bee seen at the Instructions page.

• Quick Start Video: https://www.youtube.com/watch?v=vtfIq4RQ6_w
• Intro to FreeCad: https://www.youtube.com/watch?v=2yHRuef29L4
• Healing with MeshLab: https://www.youtube.com/watch?v=eLGIRAgLz4w
• Upgrading to Repetrel 2.4xx: https://www.youtube.com/watch?v=YyXFKYpzs30
• NEW Unboxing the System 30: https://www.youtube.com/watch?v=bHxC2__DPsM
• NEW Tramming the heated build platform and setting Z-Zero: https://www.youtube.com/watch?v=lK_x0M8p9Ew
• Loading the EMO-25: https://www.youtube.com/watch?v=4yuzpUqeE-Y
• More Loading the EMO-25: https://www.youtube.com/watch?v=IEmQJxlPnuY
• Setting up custom gcode: https://www.youtube.com/watch?v=tIAQT0SBR-g
• Creating a part with support material: https://www.youtube.com/watch?v=QL9nxP_Lg1U
• Loading and Unloading Filament in the MK-1 head: http://youtu.be/Llas80vYFPc
• Updating Slic3r Settings: http://youtu.be/A0I6Xu9Tlvc
• MK1 Series Printing Tips: https://www.youtube.com/watch?v=Fg9omXlYR-Q
• EMO Series Printing Tips: https://www.youtube.com/watch?v=tLHpaePTP-k
• Manually Setting the Z-Zero Position: https://www.youtube.com/watch?v=ArDX4UpflmE
• Updating your Slic3r Recipes: https://www.youtube.com/watch?v=A0I6Xu9Tlvc
• Multi-Head Calibration Guide: https://www.youtube.com/watch?v=IQscrgv6uaQ
• DXF to GCODE for the Laser: https://youtu.be/YRsyEGHyt3k
• Powering up the System: https://www.youtube.com/watch?v=h_crzan5T7Y
• How to use 3D PDFs: https://www.youtube.com/watch?v=DoBqTQ_qCUY
• Post Processing with a Heat Gun: https://www.youtube.com/watch?v=0Aj9WCabPgw
• First Print Walkthrough: https://www.youtube.com/watch?v=VNQNaz0Yzt4
• Adding DavoPads (FrogToes/PrintStamps) to Anchor Large Prints: https://www.youtube.com/watch?v=zgcggw5BglA

Product Maintenance

While we strive to be perfect, we're not there yet. Here are some instructional videos for adjustments and maintenance that some users have had to perform:

• Adjusting the X-arm: https://youtu.be/0gFX6Mh-ths
• Adjusting the Y-arm: https://youtu.be/LZd0ecogGlQ
• Replacing your Power Supply http://youtu.be/Zl1sqy6PWx8
• Upgrading your MK1 fan nozzle: http://youtu.be/T6-ZLEHyxho
• Replacing the flat flex cable on the heated build platform: https://www.youtube.com/watch?v=2bawja0Xz_c
• Replacing the 4A fuses (1206 package) on the yoke: http://youtu.be/EosKDe-SyUI
• Updating the 103 HotHead / HotBed Controllers: https://youtu.be/yM8QMZBTb4o
• Replacing the 103 HotHead Controller: https://youtu.be/XKCEkKSolZc
• Updating the 407 Motion Controller: https://youtu.be/cFAFRkpLmww
• Tapping the Flagpole: https://www.youtube.com/watch?v=iULf6s8UIzw
• Changing the Print Head PCB: https://www.youtube.com/watch?v=XKCEkKSolZc
• Changing the Main I/O Board: https://www.youtube.com/watch?v=66S9XJ-KeU8

Archives

• Original Kickstarter Video: https://www.youtube.com/watch?v=3UnMxL2bw4o
• Shop Tour: https://www.youtube.com/watch?v=Z9rgkw5r4l4
• Tramming the heated build platform: https://www.youtube.com/watch?v=soY9uOw3nCM
• Software Teaser: https://www.youtube.com/watch?v=CBaQZjpPqFU
• Big Nerd Ranch Talk: https://www.youtube.com/watch?v=jdoN_1jP8Ks
• Upgrading to Repetrel 2.x: https://www.youtube.com/watch?v=n4QwiuQtjO0
• ColumbusMAKESit Printer Burn-in: https://www.youtube.com/watch?v=UEfeVYbbKPQ
• Engine Sneak Peek (Four Materials): https://www.youtube.com/watch?v=_TjGIa60vAg
• Kids test 3D Printed Hockey Pucks: https://www.youtube.com/watch?v=xYttqVDkY2c
• Repetrel 1.806 New Features: https://www.youtube.com/watch?v=TZUeh6Bkwu8