Difference between revisions of "Drivers"

From Hyrel3D
Jump to navigation Jump to search
Line 28: Line 28:


Now, in Devices and Printers, you should see the '''FT232R USB UART''' without any alert icon. Congratulations!
Now, in Devices and Printers, you should see the '''FT232R USB UART''' without any alert icon. Congratulations!
== Microscope Driver ==
The newer microscopes (send in 2018) require this driver to be downloaded, extracted, and installed: http://hyrel3d.net/downloads/drivers/Microscope_Driver.rar

Revision as of 14:49, 4 October 2018

Installing Drivers

Drivers Download button.png

Drivers, as of May, 2018

If, for some reason, you re-OSed or re-imaged your PC, or are installing on a new PC (or your local IT people made some changes preventing you from connecting to the printer), you will need to ensure that the proper drivers are in place. AFTER you have done the install above:

1. Download the file linked above.

2. Navigate to C:\Repetrel\bin\_RUN_ME_ON_NEW_INSTALL and execute each numbered file AS ADMINSTRATOR, IN ORDER:

  • 1.Windows 8 Compatibility Resolver.bat
  • 2.dpinst_amd64.exe
  • 3.dpinst_x86.exe
  • 4.CDM v2.12.00 WHQL Certified.exe
  • 5.VCP_V1.3.1_Setup_x64.exe
  • 6.VCP_V1.3.1_Setup.exe
  • 7.vcredist_ia64.exe
  • 8.vcredist_x64.exe
  • 9.vcredist_x86.exe

Now, in Devices and Printers, you should see the FT232R USB UART without any alert icon. Congratulations!

Microscope Driver

The newer microscopes (send in 2018) require this driver to be downloaded, extracted, and installed: http://hyrel3d.net/downloads/drivers/Microscope_Driver.rar