Difference between revisions of "Filaments"

From Hyrel3D
Jump to navigation Jump to search
Line 5: Line 5:
| __TOC__
| __TOC__
|}
|}
Some settings for the MK1-Type heads (like temperature, prime/unprime values) will vary, depending on what material you are printing with. Nozzle diameter should accurately reflect what nozzle you have loaded (0.5mm is default) AND what path width you sliced for. Having said that, here are our default shipping settings:


{| class="wikitable" style="text-align: center;"
{| class="wikitable" style="text-align: center;"

Revision as of 13:36, 8 December 2015

Some settings for the MK1-Type heads (like temperature, prime/unprime values) will vary, depending on what material you are printing with. Nozzle diameter should accurately reflect what nozzle you have loaded (0.5mm is default) AND what path width you sliced for. Having said that, here are our default shipping settings:

Settings: MK1-250: MK1-350/400:
Material
Type (any) (any)
Color (any) (any)
Nozzle 0.500 0.500
Layer (any) (any)
Temp Info
Print Temp 240 410
Power Factor 100 100
Minimum (any) (any)
Maximum (any) (any)
Overrides
Pulses 0.78 0.78
Feed Rate % 1.000 1.000
Prime
Steps 250 250
Rate 10,000 10,000
Dwell Time (ms) 50 50
Before Tool Change 1 1
Unprime
Steps 250 250
Rate 10,000 10,000
Dwell Time (ms) 60 60
After Tool Change 1 1
Offsets
Clone Head Off Off
X 0,000 0,000
Y 0,000 0,000
Z 0,000 0,000
Head Info
Model 250 250
RTD Type 1 Meg 1 Meg
Motor Current High High
Step Mode Sixteenth Sixteenth