Instructions

Here are some step by step instructions for learning how to use your Hyrel 3D Printer.

Also, please see the Videos page.

Unboxing Your Printer

A. Quickstart PDF

B. Unboxing Video

Basic Printing

First Printing PDFs:

A. Overview, Tramming & EMO Print

B. MK1-250 Print

Trammig your bed

a. For the current printers: https://www.youtube.com/watch?v=lK_x0M8p9Ew

b. For the older printers: https://www.youtube.com/watch?v=soY9uOw3nCM

Loading your material

a. MK1-250 for 1.75mm filaments: http://youtu.be/Llas80vYFPc

b. EMO-25 for emulsifiables (pastes): https://www.youtube.com/watch?v=4yuzpUqeE-Y

Setting your Z-Zero position

Video: http://youtu.be/ArDX4UpflmE

Your First Print

a. MK1-250 for 1.75mm filaments: https://www.youtube.com/watch?v=Fg9omXlYR-Q

b. EMO-25 for emulsifiables (pastes): http://youtu.be/tLHpaePTP-k

Intermediate Printing

Intermediate Print PDF: http://hyrel3d.net/instructions/HYREL%20LLC%20-%20MultiPrint%20v0.6.pdf

Z Level Adjustment for Dual Heads

Video: https://www.youtube.com/watch?v=IQscrgv6uaQ

Parallel Print with Dual Heads

In the works...

Parallel Calibration Marking with Dual Heads

Calibration Target: http://hyrel3d.net/downloads/Hyrel_Targets.rar

X/Y Offest Calibration for Dual Heads

In the works...

Serial Print (Zebra) for Dual Heads

In the works...

Serial Print (Support Material) for Dual Heads

In the works...

Serial Print (Ping Pong) for Dual Heads

In the works...

Advanced Printing

Advanced Print PDF: (to link from here)

Videos:

(work in progress)

Troubleshooting and Maintenance

• Adjusting the X-arm: https://youtu.be/0gFX6Mh-ths

• Adjusting the Y-arm: https://youtu.be/LZd0ecogGlQ

• Replacing your Power Supply http://youtu.be/Zl1sqy6PWx8

• Upgrading your MK1 fan nozzle: http://youtu.be/T6-ZLEHyxho

• Replacing the flat flex cable on the heated build platform: https://www.youtube.com/watch?v=2bawja0Xz_c

• Replacing the 4A fuses (1206 package) on the yoke: http://youtu.be/EosKDe-SyUIa

• Updating the 103 HotHead / HotBed Controllers: https://youtu.be/yM8QMZBTb4o

• Replacing the 103 HotHead Controller: https://youtu.be/XKCEkKSolZc

• Updating the 407 Motion Controller: https://youtu.be/cFAFRkpLmww

• Updating Repetrel to 2.4xx and Slic3r to 1.2.9: https://www.youtube.com/watch?v=n4QwiuQtjO0

• DXF to GCODE for the Laser: https://youtu.be/YRsyEGHyt3k

• Converting your EMO-25 to accept 30cc plastic syringes: http://hyrel3d.net/instructions/pdfs/EMO-Syringe_Conversion.pdf