Difference between revisions of "Published Papers"

From Hyrel3D
Jump to navigation Jump to search
Line 189: Line 189:
* [https://www.diva-portal.org/smash/get/diva2:1437095/FULLTEXT02 3D Printed Food and Customized Silicone Molds: Investigating Aesthetic Appearance and Food Preparing Methods for a Dysphagia Diet], a Master's paper submitted to the [https://www.mastersportal.com/studies/155320/mechanical-engineering.html Mechanical Engineering Department of Halmstad University of Sweden]
* [https://www.diva-portal.org/smash/get/diva2:1437095/FULLTEXT02 3D Printed Food and Customized Silicone Molds: Investigating Aesthetic Appearance and Food Preparing Methods for a Dysphagia Diet], a Master's paper submitted to the [https://www.mastersportal.com/studies/155320/mechanical-engineering.html Mechanical Engineering Department of Halmstad University of Sweden]
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202000088 Inkjet-Printed Iontronics for Transparent, Elastic, andStrain-Insensitive Touch Sensing Matrix] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx the School of Materials Science and Engineering at Nanyang Technological Univeristy] and [https://en.uestc.edu.cn/ University of Electronic Science and Technology of China]
* [https://onlinelibrary.wiley.com/doi/pdf/10.1002/aisy.202000088 Inkjet-Printed Iontronics for Transparent, Elastic, andStrain-Insensitive Touch Sensing Matrix] by a team from [http://www.mse.ntu.edu.sg/Pages/Home.aspx the School of Materials Science and Engineering at Nanyang Technological Univeristy] and [https://en.uestc.edu.cn/ University of Electronic Science and Technology of China]
* [https://ieeexplore.ieee.org/abstract/document/9085403 Reliability Assessment of Magnetic Cores and 3D-printed Constant-flux Inductors] by a team from [http://vt.edu Virginia Tech] and [https://www.ti.com/ Texas Instruments]
* [https://www.sciencedirect.com/science/article/pii/S1751616119315656 Mechanical Properties of Nanocomposite Biomaterials improved by extrusion during Direct Ink Writing] by a team from the Composite Biomaterial Systems Laboratory of the [https://uwaterloo.ca/systems-design-engineering/ Systems Design Engineering School at the University of Waterloo, Canada]
* [https://www.sciencedirect.com/science/article/pii/S1751616119315656 Mechanical Properties of Nanocomposite Biomaterials improved by extrusion during Direct Ink Writing] by a team from the Composite Biomaterial Systems Laboratory of the [https://uwaterloo.ca/systems-design-engineering/ Systems Design Engineering School at the University of Waterloo, Canada]



Revision as of 16:18, 17 November 2020

Below is a list of published works citing Hyrel equipment.

209 documents as of 17 November 2020.

Non-Traditional Manufacturing

Including Antennas, Sensors, and Circuits; Combined Manufacturing Techniques; and Electro-Spinning or Electro-Melt-Spinning

Published in 2020

Published in 2019

Published in 2018

Published in 2017

Published in 2016

Published in 2015

Unheated or Chilled Reservoir Printing

Published in 2020

Published in 2019

Published in 2018

Published in 2017

Published in 2016

Published in 2015

Published in 2014

Heated Reservoir Printing

Published in 2020

Published in 2019

Published in 2018

Published in 2017

Filament Printing

Published in 2020

Published in 2019

Published in 2018

Published in 2017

Published in 2016

Published in 2015