Difference between revisions of "Videos"
Jump to navigation
Jump to search
(→2019) |
(→2017) |
||
| Line 355: | Line 355: | ||
{| border="1" class="wikitable sortable" style="text-align: center" | {| border="1" class="wikitable sortable" style="text-align: center" | ||
|+ Table of Video Links, | |+ Table of Video Links, 2020 | ||
! | ! Video Link | ||
! Subject | |||
! Applicable Model(s) | |||
! | ! Applicable Head(s) | ||
! | |||
! | |||
|- | |- | ||
! [[File:KqnjlTSg-20.jpg|200px]] | ! [[File:KqnjlTSg-20.jpg|200px| link=https://youtu.be/kqnjlTSg-20]] | ||
| CO2 Laser Marking with the Hydra | | CO2 Laser Marking with the Hydra | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:FnYDoNkgOrI.jpg|200px]] | ! [[File:FnYDoNkgOrI.jpg|200px| link=https://youtu.be/FnYDoNkgOrI]] | ||
| Converting a Hydra from Printer to Laser | | Converting a Hydra from Printer to Laser | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:FHqTlcdISIg.jpg|200px]] | ! [[File:FHqTlcdISIg.jpg|200px| link=https://youtu.be/fHqTlcdISIg]] | ||
| Cutting Nylon Mesh with CO2 Laser on a Hydra | | Cutting Nylon Mesh with CO2 Laser on a Hydra | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:NTejDT1B6uQ.jpg|200px]] | ! [[File:NTejDT1B6uQ.jpg|200px| link=https://youtu.be/nTejDT1B6uQ]] | ||
| Chamber Temperature in a Cold Room | | Chamber Temperature in a Cold Room | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:4Y9V6RWhKj4.jpg|200px]] | ! [[File:4Y9V6RWhKj4.jpg|200px| link=https://youtu.be/4Y9V6RWhKj4]] | ||
| Cutting acrylic with the CO2 Laser | | Cutting acrylic with the CO2 Laser | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:DkMtzPDtIQY.jpg|200px]] | ! [[File:DkMtzPDtIQY.jpg|200px| link=https://youtu.be/dkMtzPDtIQY]] | ||
| Tiny Heated Chilled Bed Preview | | Tiny Heated Chilled Bed Preview | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:GdvyT8HoaOw.jpg|200px]] | ! [[File:GdvyT8HoaOw.jpg|200px| link=https://youtu.be/gdvyT8HoaOw]] | ||
| Fourth Axis Rotary Print | | Fourth Axis Rotary Print | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:3nKqwcXcEgY.png|200px]] | ! [[File:3nKqwcXcEgY.png|200px| link=https://youtu.be/3nKqwcXcEgY]] | ||
| Additive Manufacturing of Toroid Inductor for Electronics Applications | | Additive Manufacturing of Toroid Inductor for Electronics Applications | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:Az7V1FSRJfs.jpg|200px]] | ! [[File:Az7V1FSRJfs.jpg|200px| link=https://www.youtube.com/watch?v=Az7V1FSRJfs]] | ||
| Hyrel Hydra X and Y Belt Tension Adjustments | | Hyrel Hydra X and Y Belt Tension Adjustments | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:SyMB5063J5E.jpg|200px]] | ! [[File:SyMB5063J5E.jpg|200px| link=https://www.youtube.com/watch?v=SyMB5063J5E]] | ||
| Hyrel Hydra Linear Bearing Adjustments | | Hyrel Hydra Linear Bearing Adjustments | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:ZEsnegXhpLw.jpg|200px]] | ! [[File:ZEsnegXhpLw.jpg|200px| link=https://www.youtube.com/watch?v=zEsnegXhpLw]] | ||
| Hyrel Hydra Z Belt Tension Adjustments | | Hyrel Hydra Z Belt Tension Adjustments | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:WNr59eCGuK4.png|200px]] | ! [[File:WNr59eCGuK4.png|200px| link=https://www.youtube.com/watch?v=WNr59eCGuK4]] | ||
| Changing the Address Resistor on the CO2 Laser | | Changing the Address Resistor on the CO2 Laser | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:QBBxkx40H8s.png|200px]] | ! [[File:QBBxkx40H8s.png|200px| link=https://www.youtube.com/watch?v=qBBxkx40H8s]] | ||
| CO2 Laser Alignment | | CO2 Laser Alignment | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:YiizFlScq9Q.png|200px]] | ! [[File:YiizFlScq9Q.png|200px| link=https://www.youtube.com/watch?v=yiizFlScq9Q]] | ||
| Hydra Yoke Adjustment | | Hydra Yoke Adjustment | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:CbiCnP_YEbA.png|200px]] | ! [[File:CbiCnP_YEbA.png|200px| link=https://www.youtube.com/watch?v=cbiCnP_YEbA]] | ||
| Hydra Yoke Angle Adjustment | | Hydra Yoke Angle Adjustment | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:XMsXzGPHjng.png|200px]] | ! [[File:XMsXzGPHjng.png|200px| link=https://www.youtube.com/watch?v=xMsXzGPHjng]] | ||
| Engnie, High Resolution (EHR) Setup, Part 2 | | Engnie, High Resolution (EHR) Setup, Part 2 | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:NbWgw9KY6Ic.png|200px]] | ! [[File:NbWgw9KY6Ic.png|200px| link=https://www.youtube.com/watch?v=NbWgw9KY6Ic]] | ||
| Engnie, High Resolution (EHR) Setup, Part 1 | | Engnie, High Resolution (EHR) Setup, Part 1 | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:UC7acwIkKmQ.png|200px]] | ! [[File:UC7acwIkKmQ.png|200px| link=https://www.youtube.com/watch?v=uC7acwIkKmQ]] | ||
| EHR Scaffold Instructions | | EHR Scaffold Instructions | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:b1x2dvdYkTE.png|200px]] | ! [[File:b1x2dvdYkTE.png|200px| link=https://www.youtube.com/watch?v=b1x2dvdYkTE]] | ||
| EHR Scaffold Intro | | EHR Scaffold Intro | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:oisWKujfXAI.png|200px]] | ! [[File:oisWKujfXAI.png|200px| link=https://www.youtube.com/watch?v=oisWKujfXAI]] | ||
| Unclogging a rare clogged MK1-250 | | Unclogging a rare clogged MK1-250 | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:6FQJuhd2Lxo.png|200px]] | ! [[File:6FQJuhd2Lxo.png|200px| link=https://www.youtube.com/watch?v=6FQJuhd2Lxo]] | ||
| Unclogging a rare clogged MK1-450 | | Unclogging a rare clogged MK1-450 | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:WrImt7_Pnxo.png|200px]] | ! [[File:WrImt7_Pnxo.png|200px| link=https://www.youtube.com/watch?v=WrImt7_Pnxo]] | ||
| Flashing Firmware on the Modified CO2 Laser Controller | | Flashing Firmware on the Modified CO2 Laser Controller | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:1J5bqvcV3Rs.png|200px]] | ! [[File:1J5bqvcV3Rs.png|200px| link=https://www.youtube.com/watch?v=1J5bqvcV3Rs]] | ||
| The Hyrel Hydra Family | | The Hyrel Hydra Family | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:CF7eRdFuZYQ.png|200px]] | ! [[File:CF7eRdFuZYQ.png|200px| link=https://www.youtube.com/watch?v=CF7eRdFuZYQ]] | ||
| High Resolution Engine Vacuum Bed | | High Resolution Engine Vacuum Bed | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:eltjeQ6KerM.png|200px]] | ! [[File:eltjeQ6KerM.png|200px| link=https://www.youtube.com/watch?v=eltjeQ6KerM]] | ||
| High Resolution Engine Setup | | High Resolution Engine Setup | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:SvX4gKqAQDI.png|200px]] | ! [[File:SvX4gKqAQDI.png|200px| link=https://www.youtube.com/watch?v=SvX4gKqAQDI]] | ||
| SDS Clench Valve Assembly Instructions | | SDS Clench Valve Assembly Instructions | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:Mz5J8jsb6D4.png|200px]] | ! [[File:Mz5J8jsb6D4.png|200px| link=https://www.youtube.com/watch?v=Mz5J8jsb6D4]] | ||
| How to Load the SDS Clench Valve | | How to Load the SDS Clench Valve | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:JwKq8_tahYA.png|200px]] | ! [[File:JwKq8_tahYA.png|200px| link=https://www.youtube.com/watch?v=JwKq8_tahYA]] | ||
| EHR Accuracy Test | | EHR Accuracy Test | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:Udbu_Zuh8k0.png|200px]] | ! [[File:Udbu_Zuh8k0.png|200px| link=https://www.youtube.com/watch?v=Udbu_Zuh8k0]] | ||
| Hydra 16A Controls Overview | | Hydra 16A Controls Overview | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:cClPqIJwhLs.png|200px]] | ! [[File:cClPqIJwhLs.png|200px| link=https://www.youtube.com/watch?v=cClPqIJwhLs]] | ||
| Using Low Temperature Solder Paste to connect a Flat Flex Cable | | Using Low Temperature Solder Paste to connect a Flat Flex Cable | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:GCzPw4FOG8c.png|200px]] | ! [[File:GCzPw4FOG8c.png|200px | ||
| link=https://www.youtube.com/watch?v=GCzPw4FOG8c]] | |||
| Draining Laser Coolant on the Hyrel Hydra | | Draining Laser Coolant on the Hyrel Hydra | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:pPtGSwyS140.png|200px]] | ! [[File:pPtGSwyS140.png|200px| link=https://www.youtube.com/watch?v=pPtGSwyS140]] | ||
| Hydra Home Calibration Details | | Hydra Home Calibration Details | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:LLIWqTRBhTo.png|200px]] | ! [[File:LLIWqTRBhTo.png|200px| link=https://www.youtube.com/watch?v=LLIWqTRBhTo]] | ||
| Replacing the top component on an STS Head Assembly | | Replacing the top component on an STS Head Assembly | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:qxbtI034omk.png|200px]] | ! [[File:qxbtI034omk.png|200px| link=https://www.youtube.com/watch?v=qxbtI034omk]] | ||
| HYDRA Hot Bed Installation | | HYDRA Hot Bed Installation | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:fuLCsqfAX3E.png|200px]] | ! [[File:fuLCsqfAX3E.png|200px| link=https://www.youtube.com/watch?v=fuLCsqfAX3E]] | ||
| Hydra Model Startup | | Hydra Model Startup | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:LhnV9H7LV9g.png|200px]] | ! [[File:LhnV9H7LV9g.png|200px| link=https://www.youtube.com/watch?v=LhnV9H7LV9g]] | ||
| Unboxing the Hydra Floor Model Units | | Unboxing the Hydra Floor Model Units | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:ULpn18OqD-U.png|200px]] | ! [[File:ULpn18OqD-U.png|200px| link=https://www.youtube.com/watch?v=ULpn18OqD-U]] | ||
| Hydra Overview by CTO Karl Gifford | | Hydra Overview by CTO Karl Gifford | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:QEfskyU7LJ4.png|200px | ! [[File:QEfskyU7LJ4.png|200px | link=https://www.youtube.com/watch?v=QEfskyU7LJ4]] | ||
| How to Manage the Pick-and-Place with Repetrel Software | |||
| https://www.youtube.com/watch?v=QEfskyU7LJ4 | | | ||
| | | | ||
| | |||
| | |||
|- | |- | ||
! [[File:Jz3onGdmW1c.png|200px]] | ! [[File:Jz3onGdmW1c.png|200px| link=https://www.youtube.com/watch?v=Jz3onGdmW1c]] | ||
| Hyrel Hydra Versitility | | Hyrel Hydra Versitility | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:pKkrd4R_54Y.png|200px]] | ! [[File:pKkrd4R_54Y.png|200px| link=https://www.youtube.com/watch?v=pKkrd4R_54Y]] | ||
| Hydra Vinyl Cutter Overview | | Hydra Vinyl Cutter Overview | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:haKWeCbXkMI.png|200px]] | ! [[File:haKWeCbXkMI.png|200px| link=https://www.youtube.com/watch?v=haKWeCbXkMI]] | ||
| Hyrel 3D Hydra Pick-and-Place Introduction | | Hyrel 3D Hydra Pick-and-Place Introduction | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:uACoqtNbXE0.png|200px]] | ! [[File:uACoqtNbXE0.png|200px| link=https://www.youtube.com/watch?v=uACoqtNbXE0]] | ||
| The Hyrel3D Hydra Line | | The Hyrel3D Hydra Line | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:KAoSS-Z-aeY.png|200px]] | ! [[File:KAoSS-Z-aeY.png|200px| link=https://www.youtube.com/watch?v=KAoSS-Z-aeY]] | ||
| Tramming the bed on the 16A | | Tramming the bed on the 16A | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:tibkVZB_n9c.png|200px]] | ! [[File:tibkVZB_n9c.png|200px| link=https://www.youtube.com/watch?v=tibkVZB_n9c]] | ||
| The Benefits of Microscope Inspection During Printing | | The Benefits of Microscope Inspection During Printing | ||
| | | | ||
| | | | ||
|- | |- | ||
! [[File:aR4d-2BZj_Y.png|200px]] | ! [[File:aR4d-2BZj_Y.png|200px| link=https://www.youtube.com/watch?v=aR4d-2BZj_Y | ||
]] | |||
| Printing PLGA for internal Biological Applications | | Printing PLGA for internal Biological Applications | ||
| | | | ||
| | | | ||
|- | |- | ||
|} | |} | ||
Revision as of 20:57, 10 December 2020
Table of Videos
Please also see the Instructions page and the Help page.
Remember, you can CTRL+F to search for a keyword on this page! You can also click on a column header to sort by that column.
The following chart compares and contrasts the various heads:
http://hyrel3d.net/wiki/index.php/Main_Page#Comparison
2020
| Video Link | Subject | Applicable Model(s) | Applicable Head(s) |
|---|---|---|---|
|
The Hyrel Hydra Electrical Panel, Explained | 16A | n/a |
|
Making DXFs from Camera Images | All | Lasers |
|
Viscotec Vipro HEAD-3 on Hyrel | All | Viscotec |
|
Explaining the NEW RSD-30 | All | Reservoirs |
|
Making DXFs from CAD Models | All | Lasers |
|
4th/5th Axis Installation and Setup | 16A | All |
|
3-Phase Spindle Tool Installation and Setup | 16A | Spindles |
|
Clench/Pinch Valve Installation and Setup | All | Reservoirs |
|
Dynamic Mixing Head Installation and Setup | All | Reservoirs |
|
EHR Electronics Access | EHR | n/a |
|
ESR Unboxing and Setup | ESR | n/a |
|
RSD-30 Refrigerated Syringe Dispenser | All | Reservoirs |
|
Printing on PEI | All | Filaments |
|
Printing Cememtitious Materials at TN Tech | All | Reservoirs |
|
Tightening set screws for Hydra X-axis | 16A | n/a |
|
Interview on GA Mfg News | All | All |
|
Hyrel V4 Install No. 9: Licensing | All | All |
|
Hyrel V4 Install No. 8: Recipes | All | All |
|
Hyrel V4 Install No. 7: Settings | All | All |
|
Hyrel V4 Install No. 6`: Firmware | All | All |
|
Hyrel V4 Install No. 5: Drivers | All | All |
|
Hyrel V4 Install No. 4: Repetrel | All | All |
|
Hyrel V4 Install No. 3: Adobe Reader | All | All |
|
Hyrel V4 Install No. 2: Ecosystem Apps | All | All |
|
Hyrel V4 Install No. 1: Winrar | All | All |
|
Hydra 16AT - Tall | 16A | All |
|
Hyrel Bulk Feeder for Cementitious Materials | 16A | Reservoirs |
|
Using the new Precision Tool Setter on a Hyrel 3D Printer | 16A | All |
2019
| Video Link | Subject | Applicable Model(s) | Applicable Head(s) |
|---|---|---|---|
|
RSD-30 - Refrigerated Syringe Dispenser | All | Reservoirs |
|
Heated & Chilled Vacuum Bed | 16A, EHR | Reservoirs |
|
4th Axis Fun - Linear and Rotary Printing | 16A | All |
|
CO2 Laser - Installation Instructions | 16A | Lasers |
|
Dynamic Mixing Head DMH | All | Reservoirs |
|
Configuring Prusa Slicer for Multi-Material Support | All | Filaments |
|
Configuring the Prusa Slicer for Breakaway Support Material | All | Filaments |
|
How to Load Filament into a Hyrel 3D Print Head | All | Filaments |
|
Loading Print Heads into your Hyrel 3D Printer | All | All |
|
How to Calibrate the Z-Zero Position | 16A, 30M, ESR | All |
|
Revised 2019: Hyrel 30M Initial Setup | 30M | All |
|
How to select a Build Surface | All | Filaments |
|
How to Tram (level) the Hydra Bed | 16A | All |
|
Laser Marking on a Cylinder | All | Lasers |
|
Five Axis Machining in Brass on a Hyrel Hydra | 16A | Spindle |
|
Configuring your Hydra for a 3-phase Spindle Tool | 16A | Spindle |
|
Five Axis Machining on a Hyrel Hydra (this gcode was used) |
16A | Spindle |
|
Dispensing RTV Silicone on a Hyrel Hydra | All | Reservoirs |
|
Machining PTFE (Teflon) on a Hyrel Hydra | 16A | Spindle |
|
Rotating Head Prototype | 16A | Filaments |
|
Re-aligning the Gantry on the Hyrel Hydra 16A | 16A | All |
2018
| Video Link | Subject | Applicable Model(s) | Applicable Head(s) |
|---|---|---|---|
|
Installing the new laser Power Supply in a Hyrel Hydra | 16A | All |
|
Hyrel Tapping Enabled | 16A | Spindle |
|
Light Duty Milling with 3-Phase Spindle on a Hyrel Hydra | 16A | Spindle |
|
Improved UV Light Source for more Powerful Crosslinking | All | Reservoirs |
|
How to install 4th and 5th Axes on a Hyrel Hydra | 16A | All |
|
How to use an additional Yoke on a Hyrel Hydra | 16A | All |
|
How to install an additional Yoke on a Hyrel Hydra | 16A | All |
|
The Filament Dryer | All | Filaments |
|
Fourth and Fifth Axes Demo on a Hyrel Hydra | 16A | All |
|
Installing a fourth axis on a Hyrel Hydra | 16A | All |
|
Machining hotbeds to under 0.001" | 16A | All |
|
Setting the Z-Offset on the EHR | EHR | All |
2017
| Video Link | Subject | Applicable Model(s) | Applicable Head(s) |
|---|---|---|---|
|
CO2 Laser Marking with the Hydra | ||
|
Converting a Hydra from Printer to Laser | ||
|
Cutting Nylon Mesh with CO2 Laser on a Hydra | ||
|
Chamber Temperature in a Cold Room | ||
|
Cutting acrylic with the CO2 Laser | ||
|
Tiny Heated Chilled Bed Preview | ||
|
Fourth Axis Rotary Print | ||
|
Additive Manufacturing of Toroid Inductor for Electronics Applications | ||
|
Hyrel Hydra X and Y Belt Tension Adjustments | ||
|
Hyrel Hydra Linear Bearing Adjustments | ||
|
Hyrel Hydra Z Belt Tension Adjustments | ||
|
Changing the Address Resistor on the CO2 Laser | ||
|
CO2 Laser Alignment | ||
|
Hydra Yoke Adjustment | ||
|
Hydra Yoke Angle Adjustment | ||
|
Engnie, High Resolution (EHR) Setup, Part 2 | ||
|
Engnie, High Resolution (EHR) Setup, Part 1 | ||
|
EHR Scaffold Instructions | ||
|
EHR Scaffold Intro | ||
|
Unclogging a rare clogged MK1-250 | ||
|
Unclogging a rare clogged MK1-450 | ||
|
Flashing Firmware on the Modified CO2 Laser Controller | ||
|
The Hyrel Hydra Family | ||
|
High Resolution Engine Vacuum Bed | ||
|
High Resolution Engine Setup | ||
|
SDS Clench Valve Assembly Instructions | ||
|
How to Load the SDS Clench Valve | ||
|
EHR Accuracy Test | ||
|
Hydra 16A Controls Overview | ||
|
Using Low Temperature Solder Paste to connect a Flat Flex Cable | ||
| Draining Laser Coolant on the Hyrel Hydra | ||
|
Hydra Home Calibration Details | ||
|
Replacing the top component on an STS Head Assembly | ||
|
HYDRA Hot Bed Installation | ||
|
Hydra Model Startup | ||
|
Unboxing the Hydra Floor Model Units | ||
|
Hydra Overview by CTO Karl Gifford | ||
|
How to Manage the Pick-and-Place with Repetrel Software | ||
|
Hyrel Hydra Versitility | ||
|
Hydra Vinyl Cutter Overview | ||
|
Hyrel 3D Hydra Pick-and-Place Introduction | ||
|
The Hyrel3D Hydra Line | ||
|
Tramming the bed on the 16A | ||
|
The Benefits of Microscope Inspection During Printing | ||
|
Printing PLGA for internal Biological Applications |
2016
| Thumbnail | Title | Link | Date | Model | Category | Details | Details | Details |
|---|---|---|---|---|---|---|---|---|
|
Varialble Width Conductive Paste Extrusion | https://www.youtube.com/watch?v=z4IGQ5JMP6g | 2016.12.30 | All | Hardware | Introduction | Emulsion | n/a |
|
Microscope Print View Setup | https://www.youtube.com/watch?v=2f5FEhVsqy8 | 2016.12.30 | All | Hardware | Maintenance | All | n/a |
|
Replacing the LED Strip | https://www.youtube.com/watch?v=D2sWEYRVAII | 2016.12.23 | System 30M | Hardware | Maintenance | LEDs | n/a |
|
Replacing the Front Switch Panel | https://www.youtube.com/watch?v=14ynZ3DHzVg | 2016.12.23 | System 30M | Hardware | Maintenance | Switch Panel | n/a |
|
Static Mixing Head Explained - v2 Including SDS Heads | https://www.youtube.com/watch?v=DQj6oLfrbLo | 2016.12.20 | All | Hardware | Introduction | Emulsion | n/a |
|
Hot Bed Manufacturing | https://www.youtube.com/watch?v=_vJXnB-8JII | 2016.12.16 | Hydra | Hardware | Instruction | All | HotBed |
|
Static Mixing Head Explained | https://www.youtube.com/watch?v=3azICOBuHdk | 2016.12.15 | MODEL | Hardware | Instruction | Emulsion | Static Mixing |
|
Timelapse Recording | https://www.youtube.com/watch?v=6qJ-2uFt-_Y | 2016.12.06 | All | Software | Instruction | n/a | n/a |
|
HotHead LEDs Explained | https://www.youtube.com/watch?v=ROpcvqS_r8s | 2016.12.06 | All | Hardware | Instruction | All | LEDs |
|
LA6-450 and LA5-808 Laser Overview | https://www.youtube.com/watch?v=Tz6mRSkOaSk | 2016.12.02 | LA5-808, LA6-450 | Hardware | Instruction | Laser | n/a |
|
SDS and CSD Overview | https://www.youtube.com/watch?v=h95IurET7UM | 2016.11.29 | SDS, CSD | Hardware | Instruction | Emulsion | n/a |
|
Quiet Storm Cooling Fan Overview | https://www.youtube.com/watch?v=4B9hoMLNOuQ | 2016.11.28 | QS | Hardware | Overview | Filament | n/a |
|
VOL-25 and VCD-25 Overview | https://www.youtube.com/watch?v=9_onCKhT_dg | 2016.11.28 | VOL-25, VCD-25 | Hardware | Overview | Emulsion | n/a |
|
KRA-15 and KCD-15 Overview | https://www.youtube.com/watch?v=QD2FrZ4kg1g | 2016.11.28 | KRA-15, KCD-15 | Hardware | Overview | Emulsion | n/a |
|
Hydra 640 (16A) Two Part Test Print | https://www.youtube.com/watch?v=Rc2UFwjUtc4 | 2016.11.23 | Hydra (All) | Hardware | Demonstration | Filament | n/a |
|
Extrusion Prototype Print | https://www.youtube.com/watch?v=Ql1NZLWVJQM | 2016.11.23 | Hydra 640 | Hardware | Demonstration | Filament | n/a |
|
EMO-25 and COD-25 Overview | https://www.youtube.com/watch?v=ktK256u0sN8 | 2016.11.17 | EMO-25, COD-25 | Hardware | Overview | Emulsion | n/a |
|
Session 3C Slicing for Multiple Head Support | https://www.youtube.com/watch?v=Vn8jnvwh5to | 2016.11.15 | Any | Software | Slicing | Any | n/a |
|
Session 3A - Setting Two Heads to Z-Zero | https://www.youtube.com/watch?v=p1Ihd4ETxhg | 2016.11.14 | All | Software | Instruction | All | n/a |
|
Session 3B - Calibrating the Offset Between Two Heads | https://www.youtube.com/watch?v=FCuSvQm6ej4 | 2016.11.14 | All | Software | Instruction | All | n/a |
|
Session 2D - Editing Slic3r Recipes | https://www.youtube.com/watch?v=dkQpsJWRI4Y | 2016.11.109 | All | Software | Instruction | All | n/a |
|
Session 2E - Slicing your STL and Viewing your GCODE | https://www.youtube.com/watch?v=kJc9sNlV0fA | 2016.11.09 | All | Software | Instruction | All | n/a |
|
Session 2C - Positioning, Scaling, and Rotating your STL | https://www.youtube.com/watch?v=IQbgGwiGVZA | 2016. | All | Software | Instruction | All | n/a |
|
Session 1A - Hardware and Software Overview | https://www.youtube.com/watch?v=mVyCq7CPGLg | 2016.11.03 | All | Software | Instruction | All | n/a |
|
Session 1B - Communications and Bed Leveling | https://www.youtube.com/watch?v=2tIHw_JIQAI | 2016.11.02 | All | Software | Instruction | All | n/a |
|
Session 1C - Printing with Plasticine | https://www.youtube.com/watch?v=lFATCfKJf4I | 2016.11.02 | All | Software | Instruction | All | n/a |
|
Session 2A: Simple CAD Modeling in FreeCAD | https://www.youtube.com/watch?v=2yHRuef29L4 | 2016.08.24 | All | Software | Instruction | All | n/a |
|
Session 2B - Healing an STL in MeshLab | https://www.youtube.com/watch?v=eLGIRAgLz4w | 2016.08.17 | All | Software | Instruction | All | n/a |
|
PC to Printer Connectivity | https://www.youtube.com/watch?v=RlJqdhtpB6Q | 2016.11.01 | All | Software | Instruction | All | n/a |
|
Using the Spindle Tool to rework Circuit Boards | https://www.youtube.com/watch?v=C88ni0huwhw | 2016.10.27 | All | Hardware | Instruction | Spindle Tool | n/a |
|
Running a FADAL CNC on Hyrel3D Circuitry, Firmware and Software | https://www.youtube.com/watch?v=KIGeQmXNbNE | 2016.10.17 | All | All | Demonstration | n/a | n/a |
|
Table Arm (X-Arm) Block Adjustment | https://www.youtube.com/watch?v=ImMo3V1D70w | 2016.10.14 | Non-Hydras | Hardware | Maintenance | All | n/a |
|
MK1-250 Overview | https://www.youtube.com/watch?v=yaCYFmoIESk | 2016.10.14 | All | Hardware | Instruction | MK1-250 | n/a |
|
MK1-450 Overview | https://www.youtube.com/watch?v=UvZMecXsHEM | 2016.10.14 | All | Hardware | Instruction | MK1-450 | n/a |
|
MK2-250 Overview | https://www.youtube.com/watch?v=SOGKeU3vLbs | 2016.10.14 | All | Hardware | Instruction | MK2-250 | n/a |
|
Replacing the 30M/ESR Heated Build Platform | https://www.youtube.com/watch?v=FkJT3ILlAHw | 2016.10.03 | All | Hardware | Instruction | HotBed | n/a |
|
Multi Head Printing - Nested STLs | https://www.youtube.com/watch?v=3KwJ6OgOx14 | 2016.09.22 | All | Software | Instruction | All | n/a |
|
X-Axis Belt Tightening | https://www.youtube.com/watch?v=4GYWfMrs0F8 | 2016.09.22 | S30, ESR | Hardware | Maintenance | All | n/a |
|
Y-Axis Belt Tightening | https://www.youtube.com/watch?v=IkgviAGep-c | 2016.09.21 | S30, ESR | Hardware | Maintenance | All | n/a |
|
Plasma Magnetic Vortex Deposition (ElectroSpinning) | https://www.youtube.com/watch?v=lQy25Nlj3_Q | 2016.09.21 | Any | Hardware | Demonstration | EMO-HV | n/a |
|
3D Milling on the Hydra Series | https://www.youtube.com/watch?v=LQb5vS97jFo | 2016.09.02 | Hydra | Hardware | Demonstration | ST1 Spindle Tool | n/a |
|
Introducing the Hydra 640 (formerly Model 16A) | https://www.youtube.com/watch?v=81sVBZOOcbw | 2016.08.05 | Hydra | Hardware | Introduction | Any | n/a |
|
USBB Jumper Instructions | https://www.youtube.com/watch?v=uPqr4S0WC3Q | 2016.07.19 | S30M, ESR, EHR | Hardware | Instruction | Any | n/a |
|
Size Does Matter | https://www.youtube.com/watch?v=Rw2E_d-q9bQ | 2016.07.11 | Hydra Series | Hardware | Introduction | Any | n/a |
|
Print Heads Overview | https://www.youtube.com/watch?v=xGriCCrfkuw | 2016.006.16 | Any | Hardware | Overview | Print Heads | n/a |
|
Session 2F - Loading and Printing with Filaments, MK-Series Heads | https://www.youtube.com/watch?v=QMyuKdgiWI4 | 2016.06.03 | Any | Hardware | Instruction | MK Series | n/a |
|
MK1-250 PEEK Nozzle Assembly | https://www.youtube.com/watch?v=ysO8oAzFwC4 | 2016.05.02 | Any | Hardware | Instruction | MK1-250, MK2-250 | n/a |
|
New Hydra Printer Line Intro | https://www.youtube.com/watch?v=BoHRC9m5nlQ | 2016.03.28 | Hydra | Hardware | Introduction | Any | n/a |
|
Bioplotting for under $10K | https://www.youtube.com/watch?v=XREWb_Md5o0 | 2016.02.17 | Any | Hardware | Introduction | SDS Series | n/a |
|
Programming Head Offsets | https://www.youtube.com/watch?v=9zxxBYbdlOE | 2016.02.17 | All | Software | Instruction | Any | n/a |
|
Slicing for a Two-Material Print | https://www.youtube.com/watch?v=nfIvS50zLyc | 2016.02.17 | Any | Software | Instruction | Any | n/a |
|
Loading Filament and Printing with the Hyrel3D MK2-250 | https://www.youtube.com/watch?v=0dS3bC0BnRQ | 2016.02.09 | Any | Hardware | Instruction | MK2-250 | n/a |
|
Loading Filament and Printing with the Hyrel3D MK1-250 | https://www.youtube.com/watch?v=v2ifSlZ0qEw | 2016.02.08 | Any | Hardware | Instruction | MK1-250 | n/a |
|
Loading and Printing with the EMO-25 Print Head | https://www.youtube.com/watch?v=q-DbAbNMW48 | 2016.02.04 | Any | Hardware | Instruction | EMO-25 | n/a |
|
SDS RTV Instructions, v2 | https://www.youtube.com/watch?v=ej55bZXrltA | 2016.02.04 | Any | Hardware | Instruction | SDS Series | RTV |
|
Intro to Hyrel Possibilities - Jan 2016 | https://www.youtube.com/watch?v=MwrhV74NjCQ | 2016.01.25 | All | Hardware | Overview | All | n/a |
|
MK2-250 Dual Drive for Flexible Filaments | https://www.youtube.com/watch?v=V_zCytnGvvo | 2016.01.20 | Any | Hardware | Introduction | MK2-250 | n/a |
|
6w, 450nm Laser Test | https://www.youtube.com/watch?v=O1IGa-8y9yQ | 2016.01.14 | Any | Hardware | Demonstration | LA6-450 | n/a |
|
SDS RTV Instructions, v1 | https://www.youtube.com/watch?v=0JJp7HeK35M | 2016.01.14 | Any | Hardware | Instructions | SDS Series | n/a |
|
Introducing the SDS Print Heads | https://www.youtube.com/watch?v=XKHa1CXnSdI | 2016.01.08 | Any | Hardware | Introduction | SDS Series | n/a |
|
Sneak Peek: Pick and Place Prototype | https://www.youtube.com/watch?v=BlSGlOpyipI | 2016.01.05 | Hydra | Hardware | Introduction | PNP Pick and Place | n/a |
2012-2015
| Thumbnail | Title | Link | Date | Model | Category | Activity | Material Type | Other |
|---|---|---|---|---|---|---|---|---|
|
LA6-450: 6w, 450nm Diode Laser Head | https://www.youtube.com/watch?v=OceUiuTixPA | 2015.12.22 | Any | Hardware | Introduction | LA6-450 | n/a |
|
3D Printing RTV Silicone | https://www.youtube.com/watch?v=vmw0LS_f9V0 | 2015.12.18 | Any | Hardware | Demonstration | SDS-Series | n/a |
|
Loading the VCD-25 | https://www.youtube.com/watch?v=YWe3TQGgNW0 | 2015.12.09 | Any | Hardware | Instruction | VCD-25 | n/a |
|
Short Porcelain Print Demo | https://www.youtube.com/watch?v=huJuexTLbYA | 2015.12.08 | Any | Hardware | Demonstration | EMO-25 | n/a |
|
Replacing the Tablet Interface Board | https://www.youtube.com/watch?v=b583I7AlGJI | 2015.11.25 | System 30M, EHR | Hardware | Instruction | n/a | n/a |
|
2016 Design Contest Video | https://www.youtube.com/watch?v=ZKAzXoJ0q8Y | 2015.11.17 | System 30M | Hardware | Contest | All | n/a |
|
DXF to Laser Gcode Generation | https://www.youtube.com/watch?v=YRsyEGHyt3k | 2015.10.20 | Any | Software | Instruction | Laser, Spindle Tool | n/a |
|
Printing PEEK (PolyEther Ether Ketone) and PC (PolyCarbonate) | https://www.youtube.com/watch?v=Om9cjxMXuxY | 2015.09.29 | Any | Hardware | Demonstration | MK1-450 | n/a |
|
Healing with MeshLab | https://www.youtube.com/watch?v=IreaoCfQ8mE | 2015.09.01 | Any | Software | Instruction | Any | n/a |
|
Postprocessing with a Heat Gun | https://www.youtube.com/watch?v=0Aj9WCabPgw | 2015.08.17 | Any | Hardware | Instruction | Any | n/a |
|
Introduction to Hyrel 3D Possibilities, 2015 | https://www.youtube.com/watch?v=4oxCqR_DVNQ | 2015.08.11 | All | Hardware | Introduction | All | n/a |
|
Updating to Repetrel 2 4xx | https://www.youtube.com/watch?v=n4QwiuQtjO0 | 2015.08.06 | All | Software | Instruction | n/a | n/a |
|
Updating your 407 Motion Controller | https://www.youtube.com/watch?v=cFAFRkpLmww | 2015.07.24 | All | Software | Instruction | n/a | n/a |
|
Replacing the HOTHEAD controller | https://www.youtube.com/watch?v=XKCEkKSolZc | 2015.07.23 | All | Hardware | Instruction | n/a | n/a |
|
Programming the HOTBED controller on the System 30M and ESR | https://www.youtube.com/watch?v=yM8QMZBTb4o | 2015.07.22 | All | Software | Instruction | n/a | n/a |
|
Printing with Cloning - three heads in Parallel | https://www.youtube.com/watch?v=cuRcIE-Jbyc | 2015.07.21 | All | Software | Instruction | n/a | n/a |
|
Older Instructions, Slicing for Multiple Head Support | https://www.youtube.com/watch?v=VMyS3h4qiSA | 2015.07.17 | All | Software | Slicing | Any | n/a |
|
Leveling the X-Arm on System 30M, Engine SR | https://www.youtube.com/watch?v=0gFX6Mh-ths | 2015.06.02 | System 30M, Engine SR | Hardware | Instruction | n/a | n/a |
|
Correcting Y-Arm Flexation Fix on the System 30M, Engine SR | https://www.youtube.com/watch?v=LZd0ecogGlQ | 2015.03.18 | System 30M, Engine SR | Hardware | Instruction | n/a | n/a |
|
Manually Setting the Z-Zero Position | https://www.youtube.com/watch?v=ArDX4UpflmE | 2015.03.09 | System 30M, Engine SR | Hardware | Instruction | n/a | n/a |
|
Picking Right 3D Printer For You | https://www.youtube.com/watch?v=vc9gBZtUL7c | 2015.02.08 | All | Hardware | Overview | All | n/a |
|
Changing the Main I/O Board, System 30M, ESR | https://www.youtube.com/watch?v=66S9XJ-KeU8 | 2015.02.12 | All | Hardware | Overview | All | Spine |
|
Laser Test Print | https://www.youtube.com/watch?v=yEePz8_0ttc | 2015.02.17 | All | Hardware | Demonstration | LA5-808 Diode Laser | n/a |
|
EMO Series Printing Tips | https://www.youtube.com/watch?v=tLHpaePTP-k | 2015.02.10 | All | Hardware | Instruction | EMO Series (EMO, COD, VOL, VCD, KRA, KCD, KR2, KC2) | n/a |
|
Changing Power Supplies in the 30M and ESR | https://www.youtube.com/watch?v=Zl1sqy6PWx8 | 2015.02.04 | 30M, ESR | Hardware | Instruction | Any | n/a |
|
Multi-Head Calibration Guide | https://www.youtube.com/watch?v=IQscrgv6uaQ | 2015.02.03 | Any | Hardware/Software | Instruction | Any | n/a |
|
LA5-808 "Shark V" Diode Laser | https://www.youtube.com/watch?v=0lpa4nENtyQ | 2015.01.14 | Any | Hardware | Introduction | LA5-808 | n/a |
|
Luer Tip Kit for EMO and SDS Series Print Heads | https://www.youtube.com/watch?v=mPYPWjnDGho | 2014.12.23 | Any | Hardware | Introduction | LTK | n/a |
|
Print Head SDK | https://www.youtube.com/watch?v=-VHxf182fIs | 2014.12.09 | All | Hardware, Software | Introduction | SDK | n/a |
|
MK Series Printing Tips | https://www.youtube.com/watch?v=Fg9omXlYR-Q | 2014.11.12 | All | Procedure | Instruction | MK Series | n/a |
|
Replacing fuses (old) on the Yoke | https://www.youtube.com/watch?v=EosKDe-SyUI | 2014.08.27 | ALL | Hardware | Instruction | All | n/a |
|
Loading the EMO-type Reservoirs | https://www.youtube.com/watch?v=4yuzpUqeE-Y | 2014.04.23 | ALL | Hardware | Instruction | EMO, COD, VOL, VCD, KRA, KCD, KR2, KC2 | n/a |
|
Changing the Economics of 3D Printing | https://www.youtube.com/watch?v=xQFacnpzmv0 | 2013.12.24 | All | Hardware | Demonstration | n/a | n/a |
|
System 30M Product Release | https://www.youtube.com/watch?v=c9HvQ3SepoM | 2013.10.29 | System 30M | Hardware, Software | Introduction | n/a | n/a |
|
Simultaneous 3D Printing of Multiple Parts | https://www.youtube.com/watch?v=P6aMBQSZPgg | 2013.07.02 | All | Hardware, Software | Demonstration | MK1-250 | n/a |
|
3D Printing with Sugru The Amazing Self-Setting Rubber | https://www.youtube.com/watch?v=nuii5rP53Js | 2013.06.19 | Any | Hardware | Demonstration | EMO-25 | n/a |
|
3D Printing with Play-Doh | https://www.youtube.com/watch?v=dihvAQR7LQg | 2013.06.04 | All | Hardware | Demonstration | EMO-25 | n/a |
|
3D Printing with Plasticine | https://www.youtube.com/watch?v=cw8XiW46G0k | 2013.04.13 | Any | Hardware | Demonstration | EMO-25 | n/a |
|
3D Printing with Air-Dry Modeling Clay | https://www.youtube.com/watch?v=trdz4YDbdsw | 2013.04.06 | Any | Hardware | Demonstration | EMO-25 | n/a |
|
Interchangeable Hot-Swappable Heads | https://www.youtube.com/watch?v=XNwv7Dw_Zwg | 2013.05.12 | Any | Hardware, Software | Demonstration | MK1-250 | n/a |
|
Thank you, Kickstarters! | https://www.youtube.com/watch?v=mu9xMmkZFns | 2012.11.05 | All | Hardware, Software | Thank You | n/a | n/a |
|
Quick Tour of our Main Shop! | https://www.youtube.com/watch?v=Z9rgkw5r4l4 | 2012.10.17 | All | Introduction | Thank You | n/a | n/a |