Difference between revisions of "30M"
Jump to navigation
Jump to search
| Line 12: | Line 12: | ||
* The System 30 was an improvement made while fulfilling our KickStarter obligations, and came with a larger (30" tall) enclosure. | * The System 30 was an improvement made while fulfilling our KickStarter obligations, and came with a larger (30" tall) enclosure. | ||
* The System 30M was introduced in 2013, and came with a change to all metric fasteners and custom extrusions, and a single (vs double) front door. | * The System 30M was introduced in 2013, and came with a change to all metric fasteners and custom extrusions, and a single (vs double) front door. | ||
* The System 30M v2 was introduced in 2021, and comes with better motors with closed-loop feedback and quieter operation. | * The System 30M v2 was introduced in 2021, and comes with better motors with closed-loop feedback and quieter operation. CE marked units are available upon request. | ||
== Technical Data == | == Technical Data == | ||
Revision as of 17:05, 29 January 2021
History
This is our enclosed benchtop model.
- The System was introduced during our KickStarter campaign, and came with a 23" tall enclosure.
- The System 30 was an improvement made while fulfilling our KickStarter obligations, and came with a larger (30" tall) enclosure.
- The System 30M was introduced in 2013, and came with a change to all metric fasteners and custom extrusions, and a single (vs double) front door.
- The System 30M v2 was introduced in 2021, and comes with better motors with closed-loop feedback and quieter operation. CE marked units are available upon request.
Technical Data
Technical specifications for printers currently shipping are detailed in the comparison chart on the Printer Overview page.
Adjustments
- Speed of travel (at slicing or in g-code editor)
- Layer thickness (at slicing)
- Volume of flow per unit distance (at slicing or in g-code editor)
- Extruder temperature (at slicing, in g-code editor, or manually during build) (MK-1, VOL-25)
- Cooling Fan speed (at slicing, in g-code editor, or manually during build (MK-1, QS-1)
- HotBed Temperature (at slicing, in g-code editor, or manually during build)
Or, is tabular better?
| Metric | Units | During Slicing | In G-Code Editor | GUI During Build |
|---|---|---|---|---|
| Speed of Travel | mm/min | yes | yes | no |
| Layer Thickness | mm | yes | no | no |
| Flow Rate | nL/sec | yes | yes | yes |
| Extruder Temperature | °C | yes | yes | yes |
| Fan Speed | % of max | yes | yes | yes |
| HotBed | °C | yes | yes | yes |