Difference between revisions of "GCode Header"
Jump to navigation
Jump to search
| Line 25: | Line 25: | ||
M107 ; fans/UV ; off | <span style="color: black;">M107 ; fans/UV ; off | ||
M106 C255 ; fans/UV ; set to 0-255 range | M106 C255 ; fans/UV ; set to 0-255 range | ||
Revision as of 19:49, 20 April 2021
At Hyrel, we believe that you must start with a good GCode header to get a good print. Below are explanations of our standard header files. These can be configured in Slic3r under Printer Settings > Custom G-code > Start G-code
Sample Header
- BLACK entries are for every machine
- GREEN entries are recommended, but must be manually entered
- RED entries are for the EHR only
- BLUE entries are for the 16A only
- PURPLE entries are explanations
- GOLD entries are optional, but recommended
This is what your header recipe will look like in Slic3r:
; GENERAL :
N14 ; set line numbers for error logging - Slic3r version
M772 S1 ; reset metrics and arm automatic reporting
M627 X0 Y0 Z0 J-500 K5 ; setup abort action
M107 ; fans/UV ; off
M106 C255 ; fans/UV ; set to 0-255 range
G53 ; clear offsets
G21 ; units : mm
G91 ; coordinatess : relative
G0 Z10 ; drop bed
G90 ; coordinates : absolute
G28 X0 Y0 ; home, goto : X and Y
M229 E1 D1 ; enable E-values (volumetric)
; TEMP CONTROL :
;M190 S[bed_temperature] ; bed temp : set and wait
;M109 T12 S[temperature] ; head temp : set and wait
T2 ; use THIRD tool position from the left
(this page is in progress, 20 Apr 2021)